* [gentoo-user] vserver: Mounting /run ... mount: permission denied [ !! ] @ 2012-05-21 19:20 Jarry 2012-05-21 19:43 ` Canek Peláez Valdés 0 siblings, 1 reply; 5+ messages in thread From: Jarry @ 2012-05-21 19:20 UTC (permalink / raw To: gentoo-user, vserver Hi, since some update (which I was not able to trace back but I think it was either baselayout or udev) I see this message whenever I start any of my vserver gentoo-guests: OpenRC 0.9.8.4 is starting up Gentoo Linux (x86_64) [VSERVER] * /proc is already mounted, skipping * Mounting /run ... mount: permission denied [ !! ] ... What does it mean and how can I fix it? Jarry -- _______________________________________________________________ This mailbox accepts e-mails only from selected mailing-lists! Everything else is considered to be spam and therefore deleted. ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [gentoo-user] vserver: Mounting /run ... mount: permission denied [ !! ] 2012-05-21 19:20 [gentoo-user] vserver: Mounting /run ... mount: permission denied [ !! ] Jarry @ 2012-05-21 19:43 ` Canek Peláez Valdés 2012-05-21 19:55 ` Jarry 0 siblings, 1 reply; 5+ messages in thread From: Canek Peláez Valdés @ 2012-05-21 19:43 UTC (permalink / raw To: gentoo-user On Mon, May 21, 2012 at 2:20 PM, Jarry <mr.jarry@gmail.com> wrote: > Hi, > > since some update (which I was not able to trace back > but I think it was either baselayout or udev) I see > this message whenever I start any of my vserver > gentoo-guests: > > OpenRC 0.9.8.4 is starting up Gentoo Linux (x86_64) [VSERVER] > * /proc is already mounted, skipping > * Mounting /run ... mount: permission denied [ !! ] > ... > > What does it mean and how can I fix it? Does the directory /run exists? Regards. -- Canek Peláez Valdés Posgrado en Ciencia e Ingeniería de la Computación Universidad Nacional Autónoma de México ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [gentoo-user] vserver: Mounting /run ... mount: permission denied [ !! ] 2012-05-21 19:43 ` Canek Peláez Valdés @ 2012-05-21 19:55 ` Jarry 2012-05-21 20:07 ` Canek Peláez Valdés 0 siblings, 1 reply; 5+ messages in thread From: Jarry @ 2012-05-21 19:55 UTC (permalink / raw To: gentoo-user On 21-May-12 21:43, Canek Peláez Valdés wrote: >> OpenRC 0.9.8.4 is starting up Gentoo Linux (x86_64) [VSERVER] >> * /proc is already mounted, skipping >> * Mounting /run ... mount: permission denied [ !! ] >> ... >> What does it mean and how can I fix it? > > Does the directory /run exists? Yes, it exists. But I do not understand where it should be mounted. Or what should be mounted in /run ... Jarry -- _______________________________________________________________ This mailbox accepts e-mails only from selected mailing-lists! Everything else is considered to be spam and therefore deleted. ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [gentoo-user] vserver: Mounting /run ... mount: permission denied [ !! ] 2012-05-21 19:55 ` Jarry @ 2012-05-21 20:07 ` Canek Peláez Valdés 2012-05-21 20:23 ` Dale 0 siblings, 1 reply; 5+ messages in thread From: Canek Peláez Valdés @ 2012-05-21 20:07 UTC (permalink / raw To: gentoo-user On Mon, May 21, 2012 at 2:55 PM, Jarry <mr.jarry@gmail.com> wrote: > On 21-May-12 21:43, Canek Peláez Valdés wrote: > >>> OpenRC 0.9.8.4 is starting up Gentoo Linux (x86_64) [VSERVER] >>> * /proc is already mounted, skipping >>> * Mounting /run ... mount: permission denied [ !! ] >>> ... >>> What does it mean and how can I fix it? >> >> >> Does the directory /run exists? > > > Yes, it exists. But I do not understand where it should be > mounted. Or what should be mounted in /run ... In /run goes a tmpfs, and it gets mounted really early in the boot process, so programs can write to it without /var being mounted (/var/run is a bind mount of /run in modern systems). # mount | grep /run tmpfs on /run type tmpfs (rw,nosuid,nodev,relatime,mode=755) tmpfs on /var/run type tmpfs (rw,nosuid,nodev,relatime,mode=755) I suppose OpenRC has a problem mounting /run on your system, but I don't know, I use systemd. Regards. -- Canek Peláez Valdés Posgrado en Ciencia e Ingeniería de la Computación Universidad Nacional Autónoma de México ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [gentoo-user] vserver: Mounting /run ... mount: permission denied [ !! ] 2012-05-21 20:07 ` Canek Peláez Valdés @ 2012-05-21 20:23 ` Dale 0 siblings, 0 replies; 5+ messages in thread From: Dale @ 2012-05-21 20:23 UTC (permalink / raw To: gentoo-user Canek Peláez Valdés wrote: > On Mon, May 21, 2012 at 2:55 PM, Jarry <mr.jarry@gmail.com> wrote: >> On 21-May-12 21:43, Canek Peláez Valdés wrote: >> >>>> OpenRC 0.9.8.4 is starting up Gentoo Linux (x86_64) [VSERVER] >>>> * /proc is already mounted, skipping >>>> * Mounting /run ... mount: permission denied [ !! ] >>>> ... >>>> What does it mean and how can I fix it? >>> >>> >>> Does the directory /run exists? >> >> >> Yes, it exists. But I do not understand where it should be >> mounted. Or what should be mounted in /run ... > > In /run goes a tmpfs, and it gets mounted really early in the boot > process, so programs can write to it without /var being mounted > (/var/run is a bind mount of /run in modern systems). > > # mount | grep /run > tmpfs on /run type tmpfs (rw,nosuid,nodev,relatime,mode=755) > tmpfs on /var/run type tmpfs (rw,nosuid,nodev,relatime,mode=755) > > I suppose OpenRC has a problem mounting /run on your system, but I > don't know, I use systemd. > > Regards. OP. I'm using OpenRC. Maybe this will shed some light: root@fireball / # mount | grep /run tmpfs on /run type tmpfs (rw,nosuid,nodev,relatime,mode=755) root@fireball / # Maybe the permissions are wrong or something. This is the results from ls -al: drwxr-xr-x 4 root root 80 May 18 17:39 run Hope that helps. Dale :-) :-) -- I am only responsible for what I said ... Not for what you understood or how you interpreted my words! Miss the compile output? Hint: EMERGE_DEFAULT_OPTS="--quiet-build=n" ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2012-05-21 20:25 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2012-05-21 19:20 [gentoo-user] vserver: Mounting /run ... mount: permission denied [ !! ] Jarry 2012-05-21 19:43 ` Canek Peláez Valdés 2012-05-21 19:55 ` Jarry 2012-05-21 20:07 ` Canek Peláez Valdés 2012-05-21 20:23 ` Dale
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox