[gentoo-user] tftp config problem (ltsp)

public inbox for gentoo-user@lists.gentoo.org
 help / color / mirror / Atom feed

* [gentoo-user] tftp config problem (ltsp)
@ 2007-11-03 23:06 sean
  2007-11-06 12:49 ` Roger Mason
  0 siblings, 1 reply; 7+ messages in thread
From: sean @ 2007-11-03 23:06 UTC (permalink / raw
  To: gentoo-user

I am trying to get LTSP working here.
All appear on the right track with one apparent problem, tftp'ing the file.

When I boot a client it appears to pull in the network information but 
when it starts to tftp the file, I receive a message that the file is 
not found on the client display.

I have been following the instructions here, 
http://www.gentoo.org/doc/en/ltsp.xml
and of course alter to what I need for my system.
Am I missing something obvious or something less so?

			Thanks,
			Sean

Below is my in.tftpd file.
# /etc/init.d/in.tftpd

# Path to server files from
# Depending on your application you may have to change this.
# This is commented out to force you to look at the file!
#INTFTPD_PATH="/var/tftp/"
INTFTPD_PATH="/tftpboot/"
#INTFTPD_PATH="/tftproot/"

# For more options, see in.tftpd(8)
# -R 4096:32767 solves problems with ARC firmware, and obsoletes
# the /proc/sys/net/ipv4/ip_local_port_range hack.
# -s causes $INTFTPD_PATH to be the root of the TFTP tree.
# -l is passed by the init script in addition to these options.
#INTFTPD_OPTS="-R 4096:32767 -s ${INTFTPD_PATH}"
INTFTPD_OPTS=" -s ${INTFTPD_PATH}"

The tftp file looks exactly like the one specified in the instructions.

Here is my dhcpd.conf file

#General Options
default-lease-time                      21600;
max-lease-time                          21620;
ddns-update-style                       ad-hoc;
use-host-decl-names                     on;
#authoritative;

#Boot Options
allow booting;
allow bootp;

#Network Options
#option subnet-mask                     255.255.255.0;
#option broadcast-address               192.168.0.255;
#option domain-name                     "mydomain.net";
#option domain-name-servers             192.168.0.1;
#option log-servers                     192.168.0.11;
#option routers                         192.168.0.1;

#LTSP Path Options
option root-path                        "192.168.0.11:/opt/ltsp-4.2/i386";
filename "/opt/ltsp-4.2/vmlinuz-2.6.17.8-ltsp-1";
#filename "/tftboot/lts/ltsp-4.2/vmlinuz-2.6.17.8-ltsp-1";
next-server                             192.168.0.11;

shared-network WORKSTATIONS
         {
         subnet 192.168.0.0 netmask 255.255.255.0
                 {
                 range dynamic-bootp     192.168.0.40 192.168.0.50;
                 option subnet-mask      255.255.255.0;
                 option broadcast-address 192.168.0.255;
                 option domain-name      "mydomain.net";
                 option domain-name-servers 192.168.0.1;
                 option log-servers      192.168.0.11;
                 option routers          192.168.0.1;
                 }
         }

ls of the opt/ltsp location

tardis / # cd opt/ltsp-4.2/
tardis ltsp-4.2 # ls
2.6.17.8-ltsp-1  i386  vmlinuz-2.6.17.8-ltsp-1
tardis ltsp-4.2 # pwd
/opt/ltsp-4.2
tardis ltsp-4.2 #

ls of the tftpboot structure

tardis tftpboot # pwd
/tftpboot
tardis tftpboot # ls
lts  pxe  pxelinux.cfg
tardis tftpboot # cd lts/
tardis lts # ls
vmlinuz-2.6.17.8-ltsp-1
tardis lts # cd ..
tardis tftpboot # cd pxe
tardis pxe # ls
bzImage-2.6.17.8-ltsp-1    eb-5.0.9-eepro100.lzpxe  initramfs.gz
eb-5.0.9-3c905c-tpo.lzpxe  eb-5.0.9-rtl8139.lzpxe   pxelinux.0
tardis pxe #

Here is the tail of the message log. If I am rading correctly, it looks 
proper and the client is trying to start the tftp session.
Nov  3 18:44:18 tardis dhcpd: DHCPDISCOVER from 00:00:86:43:b9:c0 via eth0
Nov  3 18:44:19 tardis dhcpd: DHCPOFFER on 192.168.0.40 to 
00:00:86:43:b9:c0 via eth0
Nov  3 18:44:20 tardis dhcpd: DHCPDISCOVER from 00:00:86:43:b9:c0 via eth0
Nov  3 18:44:20 tardis dhcpd: DHCPOFFER on 192.168.0.40 to 
00:00:86:43:b9:c0 via eth0
Nov  3 18:44:24 tardis dhcpd: DHCPDISCOVER from 00:00:86:43:b9:c0 via eth0
Nov  3 18:44:24 tardis dhcpd: DHCPOFFER on 192.168.0.40 to 
00:00:86:43:b9:c0 via eth0
Nov  3 18:44:32 tardis dhcpd: DHCPREQUEST for 192.168.0.40 
(192.168.0.11) from 00:00:86:43:b9:c0 via eth0
Nov  3 18:44:32 tardis dhcpd: DHCPACK on 192.168.0.40 to 
00:00:86:43:b9:c0 via eth0
Nov  3 18:44:32 tardis xinetd[12818]: START: tftp pid=12826 
from=192.168.0.40

Here is some info from the message log after starting xinetd.
That file is at default.

Nov  3 19:01:22 tardis xinetd[13084]: Reading included configuration 
file: /etc/xinetd.d/chargen-dgram [file=/etc/xinetd.conf] [line=49]
Nov  3 19:01:22 tardis xinetd[13084]: Reading included configuration 
file: /etc/xinetd.d/chargen-stream [file=/etc/xinetd.d/chargen-stream] 
[line=67]
Nov  3 19:01:22 tardis xinetd[13084]: Reading included configuration 
file: /etc/xinetd.d/cups-lpd [file=/etc/xinetd.d/cups-lpd] [line=67]
Nov  3 19:01:22 tardis xinetd[13084]: Reading included configuration 
file: /etc/xinetd.d/daytime-dgram [file=/etc/xinetd.d/daytime-dgram] 
[line=12]
Nov  3 19:01:22 tardis xinetd[13084]: Reading included configuration 
file: /etc/xinetd.d/daytime-stream [file=/etc/xinetd.d/daytime-stream] 
[line=67]
Nov  3 19:01:22 tardis xinetd[13084]: Reading included configuration 
file: /etc/xinetd.d/discard-dgram [file=/etc/xinetd.d/discard-dgram] 
[line=67]
Nov  3 19:01:22 tardis xinetd[13084]: Reading included configuration 
file: /etc/xinetd.d/discard-stream [file=/etc/xinetd.d/discard-stream] 
[line=67]
Nov  3 19:01:22 tardis xinetd[13084]: Reading included configuration 
file: /etc/xinetd.d/echo-dgram [file=/etc/xinetd.d/echo-dgram] [line=67]
Nov  3 19:01:22 tardis xinetd[13084]: Reading included configuration 
file: /etc/xinetd.d/echo-stream [file=/etc/xinetd.d/echo-stream] [line=67]
Nov  3 19:01:22 tardis xinetd[13084]: Reading included configuration 
file: /etc/xinetd.d/ftp-sensor [file=/etc/xinetd.d/ftp-sensor] [line=67]
Nov  3 19:01:22 tardis xinetd[13084]: Reading included configuration 
file: /etc/xinetd.d/rexec [file=/etc/xinetd.d/rexec] [line=70]
Nov  3 19:01:22 tardis xinetd[13084]: Reading included configuration 
file: /etc/xinetd.d/rlogin [file=/etc/xinetd.d/rlogin] [line=12]
Nov  3 19:01:22 tardis xinetd[13084]: Reading included configuration 
file: /etc/xinetd.d/rsh [file=/etc/xinetd.d/rsh] [line=12]
Nov  3 19:01:22 tardis xinetd[13084]: Reading included configuration 
file: /etc/xinetd.d/tcpmux-server [file=/etc/xinetd.d/tcpmux-server] 
[line=12]
Nov  3 19:01:22 tardis xinetd[13084]: Reading included configuration 
file: /etc/xinetd.d/tftp [file=/etc/xinetd.d/tftp] [line=68]
Nov  3 19:01:22 tardis xinetd[13084]: Reading included configuration 
file: /etc/xinetd.d/time-dgram [file=/etc/xinetd.d/time-dgram] [line=11]
Nov  3 19:01:22 tardis xinetd[13084]: Reading included configuration 
file: /etc/xinetd.d/time-stream [file=/etc/xinetd.d/time-stream] [line=67]
Nov  3 19:01:22 tardis xinetd[13084]: removing chargen
Nov  3 19:01:22 tardis xinetd[13084]: removing chargen
Nov  3 19:01:22 tardis xinetd[13084]: removing printer
Nov  3 19:01:22 tardis xinetd[13084]: removing daytime
Nov  3 19:01:22 tardis xinetd[13084]: removing daytime
Nov  3 19:01:22 tardis xinetd[13084]: removing discard
Nov  3 19:01:22 tardis xinetd[13084]: removing discard
Nov  3 19:01:22 tardis xinetd[13084]: removing echo
Nov  3 19:01:22 tardis xinetd[13084]: removing echo
Nov  3 19:01:22 tardis xinetd[13084]: removing ftp
Nov  3 19:01:22 tardis xinetd[13084]: removing exec
Nov  3 19:01:22 tardis xinetd[13084]: removing login
Nov  3 19:01:22 tardis xinetd[13084]: removing shell
Nov  3 19:01:22 tardis xinetd[13084]: removing tcpmux
Nov  3 19:01:22 tardis xinetd[13084]: removing time
Nov  3 19:01:22 tardis xinetd[13084]: removing time
Nov  3 19:01:22 tardis xinetd[13084]: xinetd Version 2.3.14 started with 
libwrap loadavg options compiled in.
Nov  3 19:01:22 tardis xinetd[13084]: Started working: 1 available service

-- 
gentoo-user@gentoo.org mailing list

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [gentoo-user] tftp config problem (ltsp)
  2007-11-03 23:06 [gentoo-user] tftp config problem (ltsp) sean
@ 2007-11-06 12:49 ` Roger Mason
  2007-11-06 15:06   ` sean
  0 siblings, 1 reply; 7+ messages in thread
From: Roger Mason @ 2007-11-06 12:49 UTC (permalink / raw
  To: gentoo-user

Hi Sean,

sean <tech.junk@verizon.net> writes:

I set up diskless booting recently but I'm by no means an expert, so
take my comments with plenty of salt.

> Below is my in.tftpd file.
> # /etc/init.d/in.tftpd
>
> # Path to server files from
> # Depending on your application you may have to change this.
> # This is commented out to force you to look at the file!
> #INTFTPD_PATH="/var/tftp/"
> INTFTPD_PATH="/tftpboot/"

What happens with INTFTPD_PATH="/tftpboot"? (remove trailing / )

> #INTFTPD_PATH="/tftproot/"
>
> # For more options, see in.tftpd(8)
> # -R 4096:32767 solves problems with ARC firmware, and obsoletes
> # the /proc/sys/net/ipv4/ip_local_port_range hack.
> # -s causes $INTFTPD_PATH to be the root of the TFTP tree.
> # -l is passed by the init script in addition to these options.
> #INTFTPD_OPTS="-R 4096:32767 -s ${INTFTPD_PATH}"
> INTFTPD_OPTS=" -s ${INTFTPD_PATH}"
>
>
> The tftp file looks exactly like the one specified in the instructions.
>
> tardis tftpboot # ls
> lts  pxe  pxelinux.cfg

Are you using syslinux?  I'm not sure but shouldn't there be a
pxelinux.0 file in /tftpboot?

Cheers,
Roger
-- 
gentoo-user@gentoo.org mailing list



^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [gentoo-user] tftp config problem (ltsp)
  2007-11-06 12:49 ` Roger Mason
@ 2007-11-06 15:06   ` sean
  2007-11-06 16:37     ` Dan Farrell
  0 siblings, 1 reply; 7+ messages in thread
From: sean @ 2007-11-06 15:06 UTC (permalink / raw
  To: gentoo-user

Roger Mason wrote:
> I set up diskless booting recently but I'm by no means an expert, so
> take my comments with plenty of salt.

Sounds like you have had better success than me.

>> INTFTPD_PATH="/tftpboot/"
> What happens with INTFTPD_PATH="/tftpboot"? (remove trailing / )

Since removed. Made no difference.

> Are you using syslinux?  I'm not sure but shouldn't there be a
> pxelinux.0 file in /tftpboot?
> 

I am using what ever was emerged using Gentoo's instructions.
I have had a bit more success since last posting, but not full success.
Depends on what I put in the dhcpd.conf file for the filename entry.

If it specifies
filename "/pxe/pxelinux.0"; it will start the boot but finally halts 
stating cannot find kernel image: linux.

If it specifies
filename "/lts/vmlinuz-2.6.17.8-ltsp-1"; then I get the NBP is to large 
for memory error.

So far no luck getting past either point.

				Thanks
				Sean
-- 
gentoo-user@gentoo.org mailing list

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [gentoo-user] tftp config problem (ltsp)
  2007-11-06 15:06   ` sean
@ 2007-11-06 16:37     ` Dan Farrell
  2007-11-09 16:09       ` sean
  0 siblings, 1 reply; 7+ messages in thread
From: Dan Farrell @ 2007-11-06 16:37 UTC (permalink / raw
  To: gentoo-user

On Tue, 06 Nov 2007 10:06:30 -0500
sean <tech.junk@verizon.net> wrote:

> If it specifies
> filename "/pxe/pxelinux.0"; it will start the boot but finally halts 
> stating cannot find kernel image: linux.
> 
> If it specifies
> filename "/lts/vmlinuz-2.6.17.8-ltsp-1"; then I get the NBP is to
> large for memory error.

Sean, 
	You appear to be missing just a bit of the config.  I _think_
this is all the relevant info from my dhcpd.conf:
=========================================================================
===
=== dhcpd.conf
===
=========================================================================
#don't actually know what these are for... 
option oe-key code 159 =string; 
option oe-gateway code 160 = ip-address;

# tftp server:
next-server 192.168.10.1;

option space PXE;
option PXE.mtftp-ip               code 1 = ip-address;
option PXE.mtftp-cport            code 2 = unsigned integer 16;
option PXE.mtftp-sport            code 3 = unsigned integer 16;
option PXE.mtftp-tmout            code 4 = unsigned integer 8;
option PXE.mtftp-delay            code 5 = unsigned integer 8;
option PXE.discovery-control      code 6 = unsigned integer 8;
option PXE.discovery-mcast-addr   code 7 = ip-address;

option option-150 code 150 = text ;

zone spore.ath.cx. {
        primary 192.168.1.87;
        key rndc-key;
}
zone 1.168.192.in-addr.arpa. {
        primary 192.168.1.87;
        key rndc-key;
}
subnet 192.168.1.0 netmask 255.255.255.0 {
   range 192.168.1.101 192.168.1.199;
   option domain-name-servers 192.168.1.87, 192.168.1.1;
   option domain-name "spore.ath.cx";
   ddns-domainname "spore.ath.cx";
   option routers 192.168.1.1;
   option subnet-mask 255.255.255.0;
   option broadcast-address 192.168.1.255;
   one-lease-per-client on;
   update-static-leases on;
# diskless client
   host davey{
        hardware ethernet 00:01:03:20:AE:CF;
        fixed-address 192.168.1.1;
        option host-name "davey";
        option routers none;
        DDNS-hostname "davey";
        option PXE.mtftp-ip 192.168.1.87;
        filename "pxelinux.0";
   }
}
=============================================
===
=== in.tftp configuration: 
===
=============================================
# /etc/init.d/in.tftpd

# Path to server files from
INTFTPD_PATH="/var/tftp"
INTFTPD_USER="nobody"
# For more options, see tftpd(8)
#INTFTPD_OPTS="-l -v -s ${INTFTPD_PATH} -a 192.168.10.1"
INTFTPD_OPTS="-u ${INTFTPD_USER} -l -vvvvvv -p -c -s ${INTFTPD_PATH} -a
192.168.1.87"
==============================================
== 
== relevant contents of /var/ftp 
==
==============================================

/var/tftp/
/var/tftp/pxelinux.0
/var/tftp/pxelinux.cfg/
/var/tftp/pxelinux.cfg/01-00-01-03-20-ae-cf
		# you'll notice the config file is named for the mac
		# address, prepended by 01-, and with '-' instead of
		# ':', with all lower case.  you could also use
		# 'default', if the same entry could be shared.
/var/tftp/pxelinux.cfg/default
/var/tftp/bzImage.davey

=============================================
==
== 01-00-01-03-20-ae-cf
==
=============================================
DEFAULT /bzImage.davey
APPEND ip=dhcp root=/dev/nfs nfsroot=192.168.1.87:/diskless/davey

=============================================



I think that should help out a lot.  

-- 
gentoo-user@gentoo.org mailing list



^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [gentoo-user] tftp config problem (ltsp)
  2007-11-06 16:37     ` Dan Farrell
@ 2007-11-09 16:09       ` sean
  2007-11-10  3:00         ` Dan Farrell
  0 siblings, 1 reply; 7+ messages in thread
From: sean @ 2007-11-09 16:09 UTC (permalink / raw
  To: gentoo-user

Looked over the directory structure in the tftp directory compared to 
what was setup in the ltsp directory.
Found some differences.

Copied over a directory called 2.6.17.80ltsp-1 which contained all the 
needed files in proper placement to tftp under the same original name.
Adjusted some conf files to point where needed and my test laptop 
started to boot.

First problem I ran into here was due to the touch mouse hardware.
It caused the boot to hang or panic. I deactivated the touch mouse and 
the boot restarted and progressed further till another problem.
During the boot process was getting error notices about not being able 
to connect to the nfs server.

Did some research and found this sometimes occurs when the speed of the 
server nic is so much faster then the client nic. Apparently this showed 
up with the 2.6 kernel.
Anyway, some more tweeks and had a successful boot and was greeted by 
the KDE login screen.

Logged in and was greeted by my usual desktop. Setting are still default 
so will play with them for such things as sound.

Decided to order a diskless workstation from 
http://www.disklessworkstation.com/ They appear to be a supporter of the 
ltsp project.
Also ordered an etherboot model, since that is an open standard.
Now when that shows up get to beat on it for a while.

         Thanks all for the help,
         Sean

-- 
gentoo-user@gentoo.org mailing list

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [gentoo-user] tftp config problem (ltsp)
  2007-11-09 16:09       ` sean
@ 2007-11-10  3:00         ` Dan Farrell
  2007-11-09 16:43           ` sean
  0 siblings, 1 reply; 7+ messages in thread
From: Dan Farrell @ 2007-11-10  3:00 UTC (permalink / raw
  To: gentoo-user

On Fri, 09 Nov 2007 16:09:06 +0000
sean <tech.junk@verizon.net> wrote:

> Decided to order a diskless workstation from 
> http://www.disklessworkstation.com/ They appear to be a supporter of
> the ltsp project.

why would you do that?  Coudn't you build an excellent diskless host
for less than they cost?  And their specs aren't very impressive...
-- 
gentoo-user@gentoo.org mailing list



^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [gentoo-user] tftp config problem (ltsp)
  2007-11-10  3:00         ` Dan Farrell
@ 2007-11-09 16:43           ` sean
  0 siblings, 0 replies; 7+ messages in thread
From: sean @ 2007-11-09 16:43 UTC (permalink / raw
  To: gentoo-user

Dan Farrell wrote:
> On Fri, 09 Nov 2007 16:09:06 +0000
> sean <tech.junk@verizon.net> wrote:
> 
>> Decided to order a diskless workstation from 
>> http://www.disklessworkstation.com/ They appear to be a supporter of
>> the ltsp project.
> 
> why would you do that?  Coudn't you build an excellent diskless host
> for less than they cost?  And their specs aren't very impressive...

They support the project so I figured one could not hurt.
-- 
gentoo-user@gentoo.org mailing list



^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2007-11-09 16:52 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-11-03 23:06 [gentoo-user] tftp config problem (ltsp) sean
2007-11-06 12:49 ` Roger Mason
2007-11-06 15:06   ` sean
2007-11-06 16:37     ` Dan Farrell
2007-11-09 16:09       ` sean
2007-11-10  3:00         ` Dan Farrell
2007-11-09 16:43           ` sean

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox