* [gentoo-user] 回复: [gentoo-user] Why can't I set the resolution of console ?
@ 2011-10-20 6:28 Lavender
0 siblings, 0 replies; 3+ messages in thread
From: Lavender @ 2011-10-20 6:28 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 1292 bytes --]
I just checked my system and found that there is no V86d utility.
It is wired because I remember the vesa option was chosen
by default :-( . What should I do now? Should I rebuild my kernel or
compiled vesa into module ?
------------------ 原始邮件 ------------------
发件人: "Andrey Moshbear"<andrey.vul@gmail.com>;
发送时间: 2011年10月20日(星期四) 下午2:06
收件人: "gentoo-user"<gentoo-user@lists.gentoo.org>;
主题: Re: [gentoo-user] Why can't I set the resolution of console ?
On Thu, Oct 20, 2011 at 02:05, Lavender <448463782@qq.com> wrote:
> I edit the command line of grub at boot time .
> I passed some parametres to kernel like below:
>
> root=/dev/sda6 video=atyfb:1024x768@60m
>
> and I also tried another one:
>
> root=/dev/sda6 video=aty128fb:1024x768@60m
>
> Both of them didn't show any error messages and the system
> can start up, but the resolution still no changed.
>
> There is an issue happened in my buiding kernel : I hadn't found
> the driver for my video card. I'm not sure whether it has anything
> to do with this issue?
>
> BTW, my video card information is below:
>
> ATI Technologies Inc M92 LP (ATI Radeon 4330 series)
Is vesafb/uvesafb* compiled in?
*needs v86d and initrd with /sbin/v86d in it
[-- Attachment #2: Type: text/html, Size: 2010 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* [gentoo-user] 回复: [gentoo-user] Why can't I set the resolution of console ?
@ 2011-10-20 7:13 Lavender
0 siblings, 0 replies; 3+ messages in thread
From: Lavender @ 2011-10-20 7:13 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 1240 bytes --]
I searched the parametres though the documents in kernel source tree.
The document shows just like what I wrote .
------------------ 原始邮件 ------------------
发件人: "Bill Kenworthy"<billk@iinet.net.au>;
发送时间: 2011年10月20日(星期四) 下午2:52
收件人: "gentoo-user"<gentoo-user@lists.gentoo.org>;
主题: Re: [gentoo-user] Why can't I set the resolution of console ?
On Thu, 2011-10-20 at 14:05 +0800, Lavender wrote:
> I edit the command line of grub at boot time .
> I passed some parametres to kernel like below:
>
> root=/dev/sda6 video=atyfb:1024x768@60m
>
> and I also tried another one:
>
> root=/dev/sda6 video=aty128fb:1024x768@60m
>
> Both of them didn't show any error messages and the system
> can start up, but the resolution still no changed.
>
> There is an issue happened in my buiding kernel : I hadn't found
> the driver for my video card. I'm not sure whether it has anything
> to do with this issue?
>
> BTW, my video card information is below:
>
> ATI Technologies Inc M92 LP (ATI Radeon 4330 series)
you have "aty" in the strings above - shouldnt it be "ati"
I dont currently have an ati card to check, but it doesnt look right ...
BillK
[-- Attachment #2: Type: text/html, Size: 1967 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* [gentoo-user] 回复: [gentoo-user] Why can't I set the resolution of console ?
@ 2011-10-21 5:26 Lavender
0 siblings, 0 replies; 3+ messages in thread
From: Lavender @ 2011-10-21 5:26 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 1530 bytes --]
I rebuild my kernel ,I chose extra options which are contact
with VESA :
[*]VESA VGA graphics support
[*]Userspace VESA VGA graphics support
[*]ATI Radeon display support
I'm sure that the vesa frame buffer support option was
chosen by default.
Then I write grub.conf like this:
root=/dev/sda6 video=1024x768M@60m
It is what the document in source tree exactly shows. The
system can start up and there is no error message ,but resolution
no changed .
Why it would be this? How can I figure it out?
------------------ 原始邮件 ------------------
发件人: "Andrey Moshbear"<andrey.vul@gmail.com>;
发送时间: 2011年10月20日(星期四) 下午2:06
收件人: "gentoo-user"<gentoo-user@lists.gentoo.org>;
主题: Re: [gentoo-user] Why can't I set the resolution of console ?
On Thu, Oct 20, 2011 at 02:05, Lavender <448463782@qq.com> wrote:
> I edit the command line of grub at boot time .
> I passed some parametres to kernel like below:
>
> root=/dev/sda6 video=atyfb:1024x768@60m
>
> and I also tried another one:
>
> root=/dev/sda6 video=aty128fb:1024x768@60m
>
> Both of them didn't show any error messages and the system
> can start up, but the resolution still no changed.
>
> There is an issue happened in my buiding kernel : I hadn't found
> the driver for my video card. I'm not sure whether it has anything
> to do with this issue?
>
> BTW, my video card information is below:
>
> ATI Technologies Inc M92 LP (ATI Radeon 4330 series)
[-- Attachment #2: Type: text/html, Size: 2476 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2011-10-21 5:28 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-10-21 5:26 [gentoo-user] 回复: [gentoo-user] Why can't I set the resolution of console ? Lavender
-- strict thread matches above, loose matches on Subject: below --
2011-10-20 7:13 Lavender
2011-10-20 6:28 Lavender
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox