Hi folks,
I setup a network interface to switch in two different network with
different gateways using config_eth0=( "arping" ), and I can get gateway mac
when use arping2 command directly.
But the /etc/init.d/net.eth0 start always fails, can you help me to find the
issue out?

$ cat /etc/conf.d/net
# This blank configuration will automatically use DHCP for any net.*
# scripts in /etc/init.d.  To create a more complete configuration,
# please review /etc/conf.d/net.example and save your configuration
# in /etc/conf.d/net (this file :]!).

dns_domain="vm"
config_eth0=( "arping" )

gateways_eth0=( "192.168.1.254,,192.168.1.114 192.168.1.1,,192.168.1.114" )

#config_eth0=( "192.168.1.114/24" )
#dns_servers_eth0=( "8.8.8.8 8.8.4.4" )
#routes_192168001001=( "default via 192.168.1.1" )

config_192168001254=( "192.168.1.114/24" )
routes_192168001254=( "default via 192.168.1.254" )

dns_servers_eth0=( "8.8.8.8 8.8.4.4" )

fallback_eth0=( "dhcp" )
dhcp_eth0="nodns"

$ sudo arping2 -0 -r -c 1 -i eth0 -S 192.168.1.114 192.168.1.254
00:1d:xx:xx:xx:xx

Thanks for your help.

-- 
BR,
Zhou Rui