[gentoo-user] Gentoo repositories (Zugaina)

[gentoo-user] Gentoo repositories (Zugaina)

[James]

Howdy,


I just ran 'layman -L' and see that most repositories
are now running git. However, zugaina, is not (yet?).
Aren't they all going to (suppose to) migrate to git?

I was able to use layman to sync zugaina [1].
But, eix-update failed extensively on the  zugaina overlay.

Comments from anyone familiar with zugaina is most appreciated.


ideas?
James

[1] http://gpo.zugaina.org/

Re: [gentoo-user] Gentoo repositories (Zugaina)

[Alan McKinnon]

On 16/12/2014 20:10, James wrote:
> Howdy,
> 
> 
> I just ran 'layman -L' and see that most repositories
> are now running git. However, zugaina, is not (yet?).
> Aren't they all going to (suppose to) migrate to git?

Overlays maintainers are supposed to do whatever they feel like. This
includes using or not using git.

There is no "supposed to"
> 
> I was able to use layman to sync zugaina [1].
> But, eix-update failed extensively on the  zugaina overlay.
> 
> Comments from anyone familiar with zugaina is most appreciated.

error messages?


-- 
Alan McKinnon
alan.mckinnon@gmail.com

[gentoo-user] Re: Gentoo repositories (Zugaina)

[James]

Alan McKinnon <alan.mckinnon <at> gmail.com> writes:


> > But, eix-update failed extensively on the  zugaina overlay.

> error messages?


The entire zugaina repo fails on 'eix-update' all of the other
repos are fine, even my local repo with 'eix-update'

too numerous  to grab top. Here's a few examples:



ebuild failed with status 1
     Reading category  41|163 ( 25%): dev-perl ..
Could not properly execute
/var/lib/layman/zugaina/dev-perl/Crypt-OpenSSL-DSA/Crypt-OpenSSL-DSA-0.13.ebuild
     Reading category  41|163 ( 25%): dev-perl .. * ERROR:
dev-perl/Data-Serializer-0.570::zugaina failed (depend phase):
 *   EAPI=3 is not supported by perl-module.eclass

<snip>

   Reading category 107|163 ( 65%): net-news ..
Could not properly execute
/var/lib/layman/zugaina/net-news/feed2imap/feed2imap-0.7.ebuild
     Reading category 109|163 ( 66%): net-p2p .. * ERROR:
net-p2p/freenet-0.7_p1218::zugaina failed (depend phase):
 *   git.eclass could not be found by inherit()
 * 
 * Call stack:
 *                  ebuild.sh, line 550:  Called source
'/var/lib/layman/zugaina/net-p2p/freenet/freenet-0.7_p1218.ebuild'
 *   freenet-0.7_p1218.ebuild, line  12:  Called inherit 'eutils' 'git'
'java-pkg-2' 'java-ant-2' 'multilib'
 *                  ebuild.sh, line 257:  Called die
 * The specific snippet of code:
 *   		[[ -z ${location} ]] && die "${1}.eclass could not be found by inherit()"
 * 
 * If you need support, post the output of `emerge --info
'=net-p2p/freenet-0.7_p1218::zugaina'`,
 * the complete build log and the output of `emerge -pqv
'=net-p2p/freenet-0.7_p1218::zugaina'`.
 * Working directory: '/usr/lib64/python3.3/site-packages'
 * S: '/freenet-0.7_p1218'

ebuild failed with status 1
     Reading category 109|163 ( 66%): net-p2p ..
Could not properly execute
/var/lib/layman/zugaina/net-p2p/freenet/freenet-0.7_p1218.ebuild
     Reading category 163|163 (100%) Finished           
[5] 'jackslap' /usr/local/portage (cache:
parse|ebuild*#metadata-md5#metadata-assign#assign)
     Reading category 163|163 (100%) Finished       
Applying masks ..
Calculating hash tables ..
Writing database file /var/cache/eix/portage.eix ..
Database contains 18672 packages in 163 categories.


Usually I wait a few hours and they sync. All the other repos are fine.
I wish there was a tool, like elogviewer for eix-update.
Ideas?



James

[gentoo-user] Re: Gentoo repositories (Zugaina)

[James]

Alan McKinnon <alan.mckinnon <at> gmail.com> writes:

> error messages?
> 


I caught the beginning with a <cntl Z>


[1] 'sunrise' /var/lib/layman/sunrise (cache:
parse|ebuild*#metadata-md5#metadata-assign#assign)
     Reading category 163|163 (100%) Finished             
[2] 'ultrabug' /var/lib/layman/ultrabug (cache:
parse|ebuild*#metadata-md5#metadata-assign#assign)
     Reading category 163|163 (100%) Finished       
[3] 'alunduil' /var/lib/layman/alunduil (cache:
parse|ebuild*#metadata-md5#metadata-assign#assign)
     Reading category 163|163 (100%) Finished       
[4] 'zugaina' /var/lib/layman/zugaina (cache:
parse|ebuild*#metadata-md5#metadata-assign#assign)
     Reading category  37|163 ( 22%): dev-libs .. * ERROR:
dev-libs/libprelude-0.9.20::zugaina failed (depend phase):
 *   EAPI= is not supported by perl-module.eclass
 * 
 * Call stack:
*                  ebuild.sh, line 550:  Called source
'/var/lib/layman/zugaina/dev-libs/libprelude/libprelude-0.9.20.ebuild'
 *   libprelude-0.9.20.ebuild, line   5:  Called inherit 'perl-module'
'flag-o-matic' 'eutils'
 *                  ebuild.sh, line 280:  Called __qa_source
'/usr/portage/eclass/perl-module.eclass'
 *                  ebuild.sh, line  80:  Called source
'/usr/portage/eclass/perl-module.eclass'
 *         perl-module.eclass, line  48:  Called die
 * The specific snippet of code:
 *   		die "EAPI=${EAPI} is not supported by perl-module.eclass"
 * 
 * If you need support


A perl issue I have not seen before.


Maybe something in my perl is amiss or new? Many these EAPI versions are too
old? Surely portage still has older EAPI-2 and -3 packages that 'eix-update'
works with updates.

 I never had this problem with zugaina before.....


ideas?


James

Re: [gentoo-user] Re: Gentoo repositories (Zugaina)

[Alan McKinnon]

On 16/12/2014 22:02, James wrote:
> Alan McKinnon <alan.mckinnon <at> gmail.com> writes:
> 
> 
>>> But, eix-update failed extensively on the  zugaina overlay.
> 
>> error messages?
> 
> 
> The entire zugaina repo fails on 'eix-update' all of the other
> repos are fine, even my local repo with 'eix-update'
> 
> too numerous  to grab top. Here's a few examples:
> 
> 
> 
> ebuild failed with status 1
>      Reading category  41|163 ( 25%): dev-perl ..
> Could not properly execute
> /var/lib/layman/zugaina/dev-perl/Crypt-OpenSSL-DSA/Crypt-OpenSSL-DSA-0.13.ebuild
>      Reading category  41|163 ( 25%): dev-perl .. * ERROR:
> dev-perl/Data-Serializer-0.570::zugaina failed (depend phase):
>  *   EAPI=3 is not supported by perl-module.eclass

The repo content is broken. Nothing to do with not-git

Tell the overlay maintainer to fix the ebuilds hosted there


-- 
Alan McKinnon
alan.mckinnon@gmail.com

Re: [gentoo-user] Re: Gentoo repositories (Zugaina)

[Peter Humphrey]

On Tuesday 16 December 2014 20:18:10 James wrote:

> I caught the beginning with a <cntl Z>

CTRL-S and CTRL-Q are also very useful. Sometimes you have to be pretty 
quick on the keys, though.

-- 
Rgds
Peter.

Re: [gentoo-user] Re: Gentoo repositories (Zugaina)

[Dale]

Peter Humphrey wrote:
> On Tuesday 16 December 2014 20:18:10 James wrote:
>
>> I caught the beginning with a <cntl Z>
> CTRL-S and CTRL-Q are also very useful. Sometimes you have to be pretty 
> quick on the keys, though.
>

Do you have a link that lists all those options?  I'd like to read up on
that some.

Thanks.

Dale

:-)  :-) 

Re: [gentoo-user] Re: Gentoo repositories (Zugaina)

[Peter Humphrey]

On Wednesday 17 December 2014 04:03:48 Dale wrote:
> Peter Humphrey wrote:
> > On Tuesday 16 December 2014 20:18:10 James wrote:
> >> I caught the beginning with a <cntl Z>
> > 
> > CTRL-S and CTRL-Q are also very useful. Sometimes you have to be pretty
> > quick on the keys, though.
> 
> Do you have a link that lists all those options?  I'd like to read up on
> that some.

No, sorry. That's just one I remember from about 20 years ago.

Still up? ! :-)

-- 
Rgds
Peter.

Re: [gentoo-user] Re: Gentoo repositories (Zugaina)

[Peter Humphrey]

On Wednesday 17 December 2014 10:11:22 I wrote:
> On Wednesday 17 December 2014 04:03:48 Dale wrote:
> > Peter Humphrey wrote:
> > > On Tuesday 16 December 2014 20:18:10 James wrote:
> > >> I caught the beginning with a <cntl Z>
> > > 
> > > CTRL-S and CTRL-Q are also very useful. Sometimes you have to be
> > > pretty
> > > quick on the keys, though.
> > 
> > Do you have a link that lists all those options?  I'd like to read up on
> > that some.
> 
> No, sorry. That's just one I remember from about 20 years ago.

Googling for "xterm control keys" threw this up:

http://how-to.wikia.com/wiki/How_to_use_short-cut_keys_in_xterm_and_other_terminals

-- 
Rgds
Peter.

Re: [gentoo-user] Re: Gentoo repositories (Zugaina)

[Dale]

Peter Humphrey wrote:
> On Wednesday 17 December 2014 10:11:22 I wrote:
>> On Wednesday 17 December 2014 04:03:48 Dale wrote:
>>> Peter Humphrey wrote:
>>>> On Tuesday 16 December 2014 20:18:10 James wrote:
>>>>> I caught the beginning with a <cntl Z>
>>>> CTRL-S and CTRL-Q are also very useful. Sometimes you have to be
>>>> pretty
>>>> quick on the keys, though.
>>> Do you have a link that lists all those options?  I'd like to read up on
>>> that some.
>> No, sorry. That's just one I remember from about 20 years ago.
> Googling for "xterm control keys" threw this up:
>
> http://how-to.wikia.com/wiki/How_to_use_short-cut_keys_in_xterm_and_other_terminals
>

Yew da man!!!  My first problem, I didn't know what to search for.  That
will get bookmarked and keyworded with ctrl to help me find it when I
need it. 

Thanks much!!

Dale

:-)  :-) 

Re: [gentoo-user] Re: Gentoo repositories (Zugaina)

[Neil Bothwick]

[-- Attachment #1: Type: text/plain, Size: 344 bytes --]

On Wed, 17 Dec 2014 09:57:51 +0000, Peter Humphrey wrote:

> > I caught the beginning with a <cntl Z>  
> 
> CTRL-S and CTRL-Q are also very useful. Sometimes you have to be pretty 
> quick on the keys, though.

Or run the command with script.


-- 
Neil Bothwick

Three kinds of people: Those who can count, and those who can't.

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]