From: walt <w41ter@gmail.com>
To: gentoo-user@lists.gentoo.org
Subject: [gentoo-user] Re: Is grub2 stable and who uses it?
Date: Tue, 04 Oct 2011 14:20:59 -0700 [thread overview]
Message-ID: <j6ftbs$da7$1@dough.gmane.org> (raw)
In-Reply-To: <4E8B1DD3.7050709@gmail.com>
On 10/04/2011 07:53 AM, Dale wrote:
> Could this fix the mess with /usr and /var having to be on / or a initramfs?
I'm using grub2 because it fixes a different problem that has always needed an
initramfs--but not the recently lamented separate /var problem.
I have an outboard ESATA disk that I can plug into various machines for making
backups. If the outboard disk is powered on during boot/reboot, the BIOS will
detect the disks in a different order so that old grub tries to load the boot
sector from the outboard disk instead of the internal one, and fails.
The answer is to let grub2 find the correct disk by checking the UUID of the
*partition table* on each disk, and then load the boot sector from only that
disk without even knowing the /dev/sd* name or the BIOS disk number.
I'm assuming/hoping that the new EFI mechanism will make all of this garbage
obsolete fairly soon. Anyone here understand the basics of EFI and how it
might relate to these problems?
next prev parent reply other threads:[~2011-10-04 21:22 UTC|newest]
Thread overview: 96+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-04 9:49 [gentoo-user] Is grub2 stable and who uses it? Dale
2011-10-04 10:07 ` Neil Bothwick
2011-10-04 10:16 ` Pandu Poluan
2011-10-04 12:56 ` Michael Orlitzky
2011-10-05 16:20 ` ny6p01
2011-10-05 16:47 ` Jonas de Buhr
2011-10-05 23:18 ` Peter Humphrey
2011-10-06 8:12 ` Neil Bothwick
2011-10-06 11:01 ` Alan McKinnon
2011-10-06 13:47 ` Neil Bothwick
2011-10-06 15:17 ` Alan McKinnon
2011-10-06 15:25 ` Michael Mol
2011-10-06 15:35 ` Alan McKinnon
2011-10-06 15:37 ` Neil Bothwick
2011-10-06 16:40 ` Sebastian Beßler
2011-10-07 0:08 ` Peter Humphrey
2011-10-07 0:42 ` Michael Mol
2011-10-07 7:38 ` Alan McKinnon
2011-10-06 8:20 ` [gentoo-user] OT: change and improvement (was: Is grub2 stable and who uses it?) Jonas de Buhr
2011-10-06 19:27 ` [gentoo-user] OT: change and improvement Michael Orlitzky
2011-10-06 19:42 ` Dale
2011-10-06 20:21 ` Mick
2011-10-07 3:19 ` Dale
2011-10-06 21:00 ` Jonas de Buhr
2011-10-06 21:23 ` Michael Orlitzky
2011-10-06 21:30 ` Paul Hartman
2011-10-06 22:33 ` Canek Peláez Valdés
2011-10-06 23:42 ` Jonas de Buhr
2011-10-07 0:55 ` Michael Orlitzky
2011-10-07 7:36 ` Jonas de Buhr
2011-10-07 13:59 ` Michael Orlitzky
2011-10-07 14:46 ` Brennan Shacklett
2011-10-07 15:03 ` Michael Orlitzky
2011-10-07 16:16 ` Jonas de Buhr
2011-10-07 17:02 ` Michael Orlitzky
2011-10-07 19:15 ` [gentoo-user] " Grant Edwards
2011-10-07 8:47 ` [gentoo-user] " Neil Bothwick
2011-10-07 13:43 ` Michael Orlitzky
2011-10-07 14:29 ` Alan Mackenzie
2011-10-07 14:55 ` Michael Orlitzky
2011-10-07 15:18 ` Dale
2011-10-07 15:43 ` Paul Hartman
2011-10-07 1:41 ` [gentoo-user] " Grant Edwards
2011-10-07 1:40 ` Grant Edwards
2011-10-07 3:32 ` Dale
2011-10-07 3:39 ` Michael Mol
2011-10-07 4:42 ` Michael Orlitzky
2011-10-07 5:01 ` Michael Mol
2011-10-07 5:09 ` Canek Peláez Valdés
2011-10-07 19:11 ` Grant Edwards
2011-10-07 19:20 ` Dale
2011-10-04 14:35 ` [gentoo-user] Re: Is grub2 stable and who uses it? Grant Edwards
2011-10-04 14:53 ` Dale
2011-10-04 20:13 ` Alan McKinnon
2011-10-04 20:52 ` Grant Edwards
2011-10-04 21:20 ` walt [this message]
2011-10-04 21:26 ` Grant Edwards
2011-10-04 15:08 ` Canek Peláez Valdés
2011-10-04 18:31 ` Grant Edwards
2011-10-04 18:56 ` Canek Peláez Valdés
2011-10-04 20:33 ` pk
2011-10-04 20:50 ` Grant Edwards
2011-10-04 20:53 ` Canek Peláez Valdés
2011-10-04 21:02 ` Grant Edwards
2011-10-04 21:14 ` Canek Peláez Valdés
2011-10-04 21:24 ` Grant Edwards
2011-10-04 21:32 ` Canek Peláez Valdés
2011-10-04 22:14 ` Grant Edwards
2011-10-04 22:21 ` Canek Peláez Valdés
2011-10-05 13:55 ` Grant Edwards
2011-10-05 14:33 ` Pandu Poluan
2011-10-05 14:46 ` Grant Edwards
2011-10-05 15:01 ` Alan McKinnon
2011-10-05 15:29 ` Neil Bothwick
2011-10-05 16:56 ` Canek Peláez Valdés
2011-10-05 18:42 ` Grant Edwards
2011-10-05 19:10 ` Canek Peláez Valdés
2011-10-05 19:33 ` Alan McKinnon
2011-10-05 14:36 ` Sebastian Beßler
2011-10-05 16:51 ` Canek Peláez Valdés
2011-10-05 6:54 ` Alan McKinnon
2011-10-04 21:33 ` Michael Schreckenbauer
2011-10-04 21:46 ` Canek Peláez Valdés
2011-10-04 22:04 ` Michael Schreckenbauer
2011-10-05 0:09 ` Dale
2011-10-05 3:16 ` Canek Peláez Valdés
2011-10-05 8:26 ` Neil Bothwick
2011-10-04 20:11 ` Alan McKinnon
2011-10-04 20:36 ` Canek Peláez Valdés
2011-10-05 8:31 ` Neil Bothwick
2011-10-04 22:31 ` Neil Bothwick
2011-10-06 12:51 ` Harry Putnam
2011-10-06 13:03 ` Tanstaafl
2011-10-06 13:51 ` Neil Bothwick
2011-10-06 17:48 ` Harry Putnam
2011-10-06 19:15 ` Alan McKinnon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='j6ftbs$da7$1@dough.gmane.org' \
--to=w41ter@gmail.com \
--cc=gentoo-user@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox