[gentoo-user] xsensors - GUI failed!

[thelma@sys-concept.com]

I installed "xsensors" but when I try to run it I get:
xsensors
GUI failed!

"sensors" by itself work OK, detects something:

it8721-isa-0290
Adapter: ISA adapter
in0:          +2.81 V  (min =  +0.48 V, max =  +0.47 V)
in1:          +2.83 V  (min =  +2.80 V, max =  +1.74 V)
in2:          +1.27 V  (min =  +0.96 V, max =  +2.99 V)
+3.3V:        +3.36 V  (min =  +2.86 V, max =  +2.52 V)
in4:          +2.18 V  (min =  +0.13 V, max =  +1.57 V)
in5:          +2.53 V  (min =  +1.34 V, max =  +2.20 V)
in6:          +2.90 V  (min =  +1.27 V, max =  +0.00 V)
3VSB:         +5.88 V  (min =  +2.28 V, max =  +0.02 V)
Vbat:         +3.19 V
fan1:        1083 RPM  (min =   11 RPM)
fan2:           0 RPM  (min =   16 RPM)
fan3:         961 RPM  (min =   10 RPM)
fan4:           0 RPM  (min =   -1 RPM)
fan5:           0 RPM  (min =   -1 RPM)
temp1:        +43.0°C  (low  = -94.0°C, high = +100.0°C)  sensor =
thermistor
temp2:        +34.0°C  (low  = -127.0°C, high = -127.0°C)  sensor =
thermistor
temp3:       -128.0°C  (low  =  +8.0°C, high = +45.0°C)  sensor = disabled
intrusion0:  OK

fam15h_power-pci-00c4
Adapter: PCI adapter
power1:       59.86 W  (crit = 125.19 W)

k10temp-pci-00c3
Adapter: PCI adapter
temp1:        +25.4°C  (high = +70.0°C)
                       (crit = +90.0°C, hyst = +87.0°C)

My computer freeze on me today, so I'm just trying to see the CPU temp.
(on a box in remote location); but I con't see any CPU temp. reading.

-- 
Thelma