* [gentoo-user] X server won't load
@ 2007-06-10 3:29 Andrey Vul
2007-06-10 13:07 ` Hans-Werner Hilse
0 siblings, 1 reply; 18+ messages in thread
From: Andrey Vul @ 2007-06-10 3:29 UTC (permalink / raw
To: gentoo-user
I rebooted into my 2.6.22-rc3-rsdl1.0-hrt2 kernel and the X server
crashes (reminds me of Beryl on Ubuntu, but this time, there is a
blank black screen and no mouse). The problem is, my laptop has no
serial port, and therefore, I can't dmesg after starting X. Because my
keyboard has gone belly-up (because Xorg acquired it), I cant
[Control][Alt][Fn] to get into the virtual console and I need to a
safe hard reboot ([Alt][PrintScreen][R,S,E,I,K,U,B]) to get back to
the console.
What info should I post? And if this is a kernel bug, what info should
I email to lkml?
---------------------
Andrey Vul
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [gentoo-user] X server won't load
2007-06-10 3:29 [gentoo-user] X server won't load Andrey Vul
@ 2007-06-10 13:07 ` Hans-Werner Hilse
2007-06-10 14:10 ` Andrey Vul
0 siblings, 1 reply; 18+ messages in thread
From: Hans-Werner Hilse @ 2007-06-10 13:07 UTC (permalink / raw
To: gentoo-user
Hi,
On Sat, 9 Jun 2007 23:29:49 -0400
"Andrey Vul" <andrey.vul@gmail.com> wrote:
> I rebooted into my 2.6.22-rc3-rsdl1.0-hrt2 kernel and the X server
> crashes (reminds me of Beryl on Ubuntu, but this time, there is a
> blank black screen and no mouse). The problem is, my laptop has no
> serial port, and therefore, I can't dmesg after starting X. Because my
> keyboard has gone belly-up (because Xorg acquired it), I cant
> [Control][Alt][Fn] to get into the virtual console and I need to a
> safe hard reboot ([Alt][PrintScreen][R,S,E,I,K,U,B]) to get back to
> the console.
>
> What info should I post? And if this is a kernel bug, what info should
> I email to lkml?
Any chance to SSH in via network? Or does the laptop have no network
connection?
I don't think that this would be a problem w/ the kernel (although,
you're using an older -rc, one never knows). X mocks a lot with the
hardware w/o the kernel coming into play...
-hwh
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [gentoo-user] X server won't load
2007-06-10 13:07 ` Hans-Werner Hilse
@ 2007-06-10 14:10 ` Andrey Vul
2007-06-10 15:05 ` Hans-Werner Hilse
0 siblings, 1 reply; 18+ messages in thread
From: Andrey Vul @ 2007-06-10 14:10 UTC (permalink / raw
To: gentoo-user
last time I did ssh was when installing LFS; been a looong time and I forgot.
Refresh my memory, please?
I have sshd on my laptop, putty on my desktop
On 6/10/07, Hans-Werner Hilse <hilse@web.de> wrote:
> Hi,
>
> On Sat, 9 Jun 2007 23:29:49 -0400
> "Andrey Vul" <andrey.vul@gmail.com> wrote:
>
> > I rebooted into my 2.6.22-rc3-rsdl1.0-hrt2 kernel and the X server
> > crashes (reminds me of Beryl on Ubuntu, but this time, there is a
> > blank black screen and no mouse). The problem is, my laptop has no
> > serial port, and therefore, I can't dmesg after starting X. Because my
> > keyboard has gone belly-up (because Xorg acquired it), I cant
> > [Control][Alt][Fn] to get into the virtual console and I need to a
> > safe hard reboot ([Alt][PrintScreen][R,S,E,I,K,U,B]) to get back to
> > the console.
> >
> > What info should I post? And if this is a kernel bug, what info should
> > I email to lkml?
>
> Any chance to SSH in via network? Or does the laptop have no network
> connection?
>
> I don't think that this would be a problem w/ the kernel (although,
> you're using an older -rc, one never knows). X mocks a lot with the
> hardware w/o the kernel coming into play...
>
> -hwh
> --
> gentoo-user@gentoo.org mailing list
>
>
--
---------------------
Andrey Vul
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [gentoo-user] X server won't load
2007-06-10 14:10 ` Andrey Vul
@ 2007-06-10 15:05 ` Hans-Werner Hilse
2007-06-10 16:41 ` Andrey Vul
0 siblings, 1 reply; 18+ messages in thread
From: Hans-Werner Hilse @ 2007-06-10 15:05 UTC (permalink / raw
To: gentoo-user
Hi,
On Sun, 10 Jun 2007 10:10:19 -0400
"Andrey Vul" <andrey.vul@gmail.com> wrote:
> last time I did ssh was when installing LFS; been a looong time and I forgot.
>
> Refresh my memory, please?
> I have sshd on my laptop, putty on my desktop
Just start sshd (it's usually configured to run straight out of the box
on gentoo), "/etc/init.d/sshd start", or permanently:
"rc-update add sshd default"
You can then use e.g. putty from the desktop and connect to the laptop,
providing your normal login data. You'll have a command line (_if_ the
kernel is alive and kicking), can issue the "dmesg", inspect the Xorg
log file and try to kill the running, broken X server. Basically what
you would do w/ a serial line.
-hwh
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [gentoo-user] X server won't load
2007-06-10 15:05 ` Hans-Werner Hilse
@ 2007-06-10 16:41 ` Andrey Vul
2007-06-10 16:58 ` Norberto Bensa
0 siblings, 1 reply; 18+ messages in thread
From: Andrey Vul @ 2007-06-10 16:41 UTC (permalink / raw
To: gentoo-user
ssh only works in loopback :(
putty whines that "Incoming packet was garbled on decryption"
On 6/10/07, Hans-Werner Hilse <hilse@web.de> wrote:
> Hi,
>
> On Sun, 10 Jun 2007 10:10:19 -0400
> "Andrey Vul" <andrey.vul@gmail.com> wrote:
>
> > last time I did ssh was when installing LFS; been a looong time and I forgot.
> >
> > Refresh my memory, please?
> > I have sshd on my laptop, putty on my desktop
>
> Just start sshd (it's usually configured to run straight out of the box
> on gentoo), "/etc/init.d/sshd start", or permanently:
> "rc-update add sshd default"
>
> You can then use e.g. putty from the desktop and connect to the laptop,
> providing your normal login data. You'll have a command line (_if_ the
> kernel is alive and kicking), can issue the "dmesg", inspect the Xorg
> log file and try to kill the running, broken X server. Basically what
> you would do w/ a serial line.
>
> -hwh
> --
> gentoo-user@gentoo.org mailing list
>
>
--
---------------------
Andrey Vul
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [gentoo-user] X server won't load
2007-06-10 16:41 ` Andrey Vul
@ 2007-06-10 16:58 ` Norberto Bensa
2007-06-10 17:26 ` Andrey Vul
2007-06-10 18:03 ` Andrey Vul
0 siblings, 2 replies; 18+ messages in thread
From: Norberto Bensa @ 2007-06-10 16:58 UTC (permalink / raw
To: gentoo-user
Andrey Vul wrote:
> ssh only works in loopback :(
>
> putty whines that "Incoming packet was garbled on decryption"
>
Try:
iptables -F
iptables -t nat -F
and try ssh again
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [gentoo-user] X server won't load
2007-06-10 16:58 ` Norberto Bensa
@ 2007-06-10 17:26 ` Andrey Vul
2007-06-10 18:03 ` Andrey Vul
1 sibling, 0 replies; 18+ messages in thread
From: Andrey Vul @ 2007-06-10 17:26 UTC (permalink / raw
To: gentoo-user
now to wait 5 minutes to recompile and reinstall my kernel, remerge
iptables, and reboot and try again..
On 6/10/07, Norberto Bensa <nbensa@gmx.net> wrote:
> Andrey Vul wrote:
> > ssh only works in loopback :(
> >
> > putty whines that "Incoming packet was garbled on decryption"
> >
>
> Try:
>
> iptables -F
> iptables -t nat -F
>
>
> and try ssh again
>
> --
> gentoo-user@gentoo.org mailing list
>
>
--
---------------------
Andrey Vul
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [gentoo-user] X server won't load
2007-06-10 16:58 ` Norberto Bensa
2007-06-10 17:26 ` Andrey Vul
@ 2007-06-10 18:03 ` Andrey Vul
2007-06-10 18:32 ` Andrey Vul
1 sibling, 1 reply; 18+ messages in thread
From: Andrey Vul @ 2007-06-10 18:03 UTC (permalink / raw
To: gentoo-user
putty still whines about garbled packets
On 6/10/07, Norberto Bensa <nbensa@gmx.net> wrote:
> Andrey Vul wrote:
> > ssh only works in loopback :(
> >
> > putty whines that "Incoming packet was garbled on decryption"
> >
>
> Try:
>
> iptables -F
> iptables -t nat -F
>
>
> and try ssh again
>
> --
> gentoo-user@gentoo.org mailing list
>
>
--
---------------------
Andrey Vul
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [gentoo-user] X server won't load
2007-06-10 18:03 ` Andrey Vul
@ 2007-06-10 18:32 ` Andrey Vul
2007-06-10 19:06 ` Andrey Vul
0 siblings, 1 reply; 18+ messages in thread
From: Andrey Vul @ 2007-06-10 18:32 UTC (permalink / raw
To: gentoo-user
Fixed the SSH problem.
Link: http://www.chiark.greenend.org.uk/~sgtatham/putty/wishlist/ssh2-aesctr-openssh.html
Fix: #USE="-ldap" emerge openssh
(but first unmask openssh-4.6)
Putty was just affected by bug (openssh-4.5+openssl-0.9.8e)
Now to use SSH to debug the crashing X server...
On 6/10/07, Andrey Vul <andrey.vul@gmail.com> wrote:
> putty still whines about garbled packets
>
>
> On 6/10/07, Norberto Bensa <nbensa@gmx.net> wrote:
> > Andrey Vul wrote:
> > > ssh only works in loopback :(
> > >
> > > putty whines that "Incoming packet was garbled on decryption"
> > >
> >
> > Try:
> >
> > iptables -F
> > iptables -t nat -F
> >
> >
> > and try ssh again
> >
> > --
> > gentoo-user@gentoo.org mailing list
> >
> >
>
>
> --
> ---------------------
> Andrey Vul
>
--
---------------------
Andrey Vul
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [gentoo-user] X server won't load
2007-06-10 18:32 ` Andrey Vul
@ 2007-06-10 19:06 ` Andrey Vul
2007-06-10 19:25 ` Andrey Vul
0 siblings, 1 reply; 18+ messages in thread
From: Andrey Vul @ 2007-06-10 19:06 UTC (permalink / raw
To: gentoo-user
dmesg:
Linux version 2.6.22-rc3 (root@andrey-laptop) (gcc version 4.1.2
(Gentoo 4.1.2)) #4 PREEMPT Sun Jun 10 13:34:06 EDT 2007
Command line: root=/dev/hda2 vga=791 ro noapic
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fea0000 (usable)
BIOS-e820: 000000003fea0000 - 000000003feae000 (ACPI data)
BIOS-e820: 000000003feae000 - 000000003ff00000 (ACPI NVS)
BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 155) 0 entries of 256 used
Entering add_active_range(0, 256, 261792) 1 entries of 256 used
end_pfn_map = 1048576
DMI 2.3 present.
ACPI: RSDP 000F6DB0, 0014 (r0 PTLTD )
ACPI: RSDT 3FEA81AD, 0034 (r1 PTLTD RSDT 6040000 LTP 0)
ACPI: FACP 3FEADE20, 0074 (r1 ATI Piranha 6040000 ATI F4240)
ACPI: DSDT 3FEA81E1, 5C3F (r1 ATI SB400 6040000 MSFT 100000E)
ACPI: FACS 3FEAEFC0, 0040
ACPI: SSDT 3FEADE94, 00D6 (r1 PTLTD POWERNOW 6040000 LTP 1)
ACPI: APIC 3FEADF6A, 005A (r1 PTLTD APIC 6040000 LTP 0)
ACPI: MCFG 3FEADFC4, 003C (r1 PTLTD MCFG 6040000 LTP 0)
Entering add_active_range(0, 0, 155) 0 entries of 256 used
Entering add_active_range(0, 256, 261792) 1 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
early_node_map[2] active PFN ranges
0: 0 -> 155
0: 256 -> 261792
On node 0 totalpages: 261691
DMA zone: 56 pages used for memmap
DMA zone: 1684 pages reserved
DMA zone: 2255 pages, LIFO batch:0
DMA32 zone: 3523 pages used for memmap
DMA32 zone: 254173 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
ATI board detected. Disabling timer routing over 8254.
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: Skipping IOAPIC probe due to 'noapic' option.
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
MPTABLE: OEM ID: MPTABLE: Product ID: MPTABLE:
APIC at: 0xFEE00000
I/O APIC #1 at 0xFEC00000.
Setting APIC routing to flat
Processors: 1
swsusp: Registered nosave memory region: 000000000009b000 - 000000000009c000
swsusp: Registered nosave memory region: 000000000009c000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000
swsusp: Registered nosave memory region: 00000000000d2000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
Built 1 zonelists. Total pages: 256428
Kernel command line: root=/dev/hda2 vga=791 ro noapic
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Detected 1800.088 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
CPU 0: aperture @ e3fe000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Memory: 1023768k/1047168k available (3831k kernel code, 22684k
reserved, 2037k data, 224k init)
Calibrating delay using timer specific routine.. 3602.25 BogoMIPS (lpj=1801125)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: AMD Turion(tm) 64 Mobile Technology ML-34 stepping 02
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 733 Objects with 61 Devices 239 Methods 24 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 3 Objects with 0 Devices 0 Methods 0 Regions
tbxface-0587 [02] tb_load_namespace : ACPI Tables successfully acquired
ACPI: setting ELCR to 0200 (from 0c00)
evxfevnt-0091 [02] enable : Transition to ACPI mode successful
Using local APIC timer interrupts.
result 12500620
Detected 12.500 MHz APIC timer.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
evgpeblk-0952 [04] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 4 Wake, Enabled 0
Runtime GPEs in this block
Completing Region/Field/Buffer/Package
initialization:...........................................................................
Initialized 24/24 Regions 0/0 Fields 34/34 Buffers 17/24 Packages (745 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:..
Executed 2 _INI methods requiring 0 _STA executions (examined 67 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:14.4
PCI: Bus #07 (-#08) is hidden behind transparent bridge #06 (-#06)
(try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 2.21 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 7 of bridge 0000:00:06.0
PCI: Cannot allocate resource region 8 of bridge 0000:00:06.0
PCI: Cannot allocate resource region 7 of bridge 0000:00:07.0
PCI: Cannot allocate resource region 8 of bridge 0000:00:07.0
ACPI: RTC can wake from S4
pnp: 00:01: iomem range 0xe0000000-0xefffffff has been reserved
pnp: 00:01: iomem range 0x0-0x0 could not be reserved
pnp: 00:01: iomem range 0x0-0x0 could not be reserved
pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
pnp: 00:08: ioport range 0x1200-0x120f has been reserved
pnp: 00:08: ioport range 0x500-0x51f has been reserved
pnp: 00:08: ioport range 0x40b-0x40b has been reserved
pnp: 00:09: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:09: iomem range 0xfff80000-0xffffffff could not be reserved
pnp: 00:09: iomem range 0x0-0xfff could not be reserved
Time: tsc clocksource has been installed.
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:06:06.2[C] -> Link [LNKG] -> GSI 11 (level,
low) -> IRQ 11
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]
MMIO=[c0208000-c02087ff] Max Packet=[2048] IR/IT contexts=[4/8]
PCI: Bridge: 0000:00:02.0
IO window: 9000-9fff
MEM window: c0100000-c01fffff
PREFETCH window: c8000000-cfffffff
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:07.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bus 7, cardbus bridge: 0000:06:06.0
IO window: 0000a400-0000a4ff
IO window: 0000a800-0000a8ff
PREFETCH window: 50000000-53ffffff
MEM window: 58000000-5bffffff
PCI: Bridge: 0000:00:14.4
IO window: a000-afff
MEM window: c0200000-c02fffff
PREFETCH window: 50000000-55ffffff
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:00:07.0 to 64
ACPI: PCI Interrupt Link [LNKE] disabled and referenced, BIOS bug
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
ACPI: PCI Interrupt 0000:06:06.0[A] -> Link [LNKE] -> GSI 11 (level,
low) -> IRQ 11
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Total HugeTLB memory allocated, 0
fuse init (API version 7.8)
JFS: nTxBlock = 8000, nTxLock = 64005
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
PCI: Setting latency timer of device 0000:00:07.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:07.0:pcie00]
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKC] -> GSI 11 (level,
low) -> IRQ 11
radeonfb: Retrieved PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=6) Memory=400.00 Mhz, System=250.00 MHz
radeonfb: PLL min 20000 max 40000
Non-DDC laptop panel detected
i2c-adapter i2c-2: unable to read EDID block.
i2c-adapter i2c-2: unable to read EDID block.
i2c-adapter i2c-2: unable to read EDID block.
radeonfb: Monitor 1 type LCD found
radeonfb: Monitor 2 type no found
radeonfb: panel ID string: CMO
radeonfb: detected LVDS panel size from BIOS: 1280x800
radeondb: BIOS provided dividers will be used
radeonfb: Dynamic Clock Power Management enabled
Console: switching to colour frame buffer device 160x50
radeonfb (0000:01:00.0): ATI Radeon 1P
ACPI: AC Adapter [ADP1] (on-line)
ieee1394: Host added: ID:BUS[0-00:1023] GUID[1234567812345678]
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input1
ACPI: Lid Switch [LID0]
input: Sleep Button (CM) as /class/input/input2
ACPI: Sleep Button (CM) [SLPB]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Marking TSC unstable due to possible TSC halt in C2
Time: acpi_pm clocksource has been installed.
ACPI: Thermal Zone [TZS0] (71 C)
ACPI: Thermal Zone [TZS1] (46 C)
ACPI: Thermal Zone [TZSV] (47 C)
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102 (c) Dave Jones
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized radeon 1.27.0 20060524 on minor 0
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:14.6[B] -> Link [LNKB] -> GSI 11 (level,
low) -> IRQ 11
ACPI: PCI interrupt for device 0000:00:14.6 disabled
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: module loaded
ACPI: PCI Interrupt 0000:06:06.3[A] -> Link [LNKE] -> GSI 11 (level,
low) -> IRQ 11
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
r8169 Gigabit Ethernet driver 2.2LK loaded
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt 0000:06:07.0[A] -> Link [LNKH] -> GSI 11 (level,
low) -> IRQ 11
eth0: RTL8169sb/8110sb at 0xffffc200005b6400, 00:0a:e4:e8:19:e7, IRQ 11
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ATIIXP: IDE controller at PCI slot 0000:00:14.1
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:14.1[A] -> Link [LNKA] -> GSI 10 (level,
low) -> IRQ 10
ATIIXP: chipset revision 0
ATIIXP: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: ST9100822A, ATA DISK drive
hda: selected mode 0x45
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: MATSHITAUJ-845D, ATAPI CD/DVD-ROM drive
hdc: selected mode 0x42
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.10-rc1 Wed Feb 14 10:14:25 PST 2007
Fusion MPT base driver 3.04.04
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.04
Fusion MPT SAS Host driver 3.04.04
video1394: Installed video1394 module
ieee1394: raw1394: /dev/raw1394 device initialized
eth1394: eth1: IPv4 over IEEE 1394 (fw-host0)
Yenta: CardBus bridge found at 0000:06:06.0 [1025:0080]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:06:06.0, mfunc 0x010a1b22, devctl 0x64
Yenta: ISA IRQ mask 0x00f8, PCI irq 11
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #08
pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff
pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x55ffffff
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:13.2[A] -> Link [LNKD] -> GSI 11 (level,
low) -> IRQ 11
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: irq 11, io mem 0xc0002000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKD] -> GSI 11 (level,
low) -> IRQ 11
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 11, io mem 0xc0000000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:13.1[A] -> Link [LNKD] -> GSI 11 (level,
low) -> IRQ 11
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 11, io mem 0xc0001000
usb 1-4: new high speed USB device using ehci_hcd and address 2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usb 1-4: configuration #1 chosen from 1 choice
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
spurious 8259A interrupt: IRQ7.
USB Universal Host Controller Interface driver v3.0
usbcore: registered new interface driver cdc_acm
drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver
for USB modems and ISDN adapters
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input3
input: PC Speaker as /class/input/input4
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000
input: SynPS/2 Synaptics TouchPad as /class/input/input5
i2c /dev entries driver
piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci: SDHCI controller found at 0000:06:06.4 [104c:8034] (rev 0)
ACPI: PCI Interrupt 0000:06:06.4[A] -> Link [LNKE] -> GSI 11 (level,
low) -> IRQ 11
mmc0: SDHCI at 0xc0209000 irq 11 DMA
mmc1: SDHCI at 0xc0208c00 irq 11 DMA
mmc2: SDHCI at 0xc0208800 irq 11 DMA
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.14rc4 (Wed May 16
09:45:46 2007 UTC).
ACPI: PCI Interrupt 0000:00:14.5[B] -> Link [LNKB] -> GSI 11 (level,
low) -> IRQ 11
ACPI: PCI Interrupt 0000:00:14.6[B] -> Link [LNKB] -> GSI 11 (level,
low) -> IRQ 11
MC'97 1 converters and GPIO not ready (0xff00)
ALSA device list:
#0: ATI IXP rev 2 with ALC655 at 0xc0003400, irq 11
#1: ATI IXP Modem rev 2 at 0xc0003800, irq 11
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (4090 buckets, 32720 max)
IPv4 over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'WEP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'TKIP'
powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology ML-34
processors (version 2.00.00)
powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x4
powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x6
powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x16
UDF-fs: No VRS found
VFS: Mounted root (jfs filesystem) readonly.
Freeing unused kernel memory: 224k freed
bcm43xx driver
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
ACPI: PCI Interrupt 0000:06:05.0[A] -> Link [LNKF] -> GSI 10 (level,
low) -> IRQ 10
bcm43xx: Chip ID 0x4318, rev 0x2
bcm43xx: Number of cores: 4
bcm43xx: Core 0: ID 0x800, rev 0xd, vendor 0x4243
bcm43xx: Core 1: ID 0x812, rev 0x9, vendor 0x4243
bcm43xx: Core 2: ID 0x804, rev 0xc, vendor 0x4243
bcm43xx: Core 3: ID 0x80d, rev 0x7, vendor 0x4243
bcm43xx: PHY connected
bcm43xx: Detected PHY: Analog: 3, Type 2, Revision 7
bcm43xx: Detected Radio: ID: 8205017f (Manuf: 17f Ver: 2050 Rev: 8)
bcm43xx: Radio turned off
bcm43xx: Radio turned off
Adding 1060280k swap on /dev/hda3. Priority:-1 extents:1 across:1060280k
r8169: eth0: link up
eth0: no IPv6 routers present
usb 1-1: new high speed USB device using ehci_hcd and address 3
usb 1-1: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi 0:0:0:0: Direct-Access MP3 Flash Drive 1.04 PQ: 0 ANSI: 0 CCS
sd 0:0:0:0: [sda] 1015808 512-byte hardware sectors (520 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] 1015808 512-byte hardware sectors (520 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: unknown partition table
sd 0:0:0:0: [sda] Attached SCSI removable disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
usb 1-1: USB disconnect, address 3
atkbd.c: Unknown key pressed (translated set 2, code 0xb3 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xb3 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xb3 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xb3 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xb3 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xb3 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
(After running startx, when my computer freezes)
[drm] Setting GART location based on new memory map
[drm] Loading R300 Microcode
[drm] writeback test succeeded in 1 usecs
/var/log/Xorg.0.log:
X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: UNKNOWN
Current Operating System: Linux andrey-laptop 2.6.22-rc3 #4 PREEMPT
Sun Jun 10 13:34:06 EDT 2007 x86_64
Build Date: 09 June 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 10 14:32:28 2007
(==) Using config file: "/root/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "ATI Radeon Mobility X600 64MB"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi,
/usr/local/share/fonts
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib64/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x6cb160
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.2
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib64/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1002,5950 card 1025,0080 rev 01 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 1002,5a34 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:06:0: chip 1002,5a38 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 1002,5a39 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:13:0: chip 1002,4374 card 1025,0080 rev 00 class 0c,03,10 hdr 80
(II) PCI: 00:13:1: chip 1002,4375 card 1025,0080 rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:2: chip 1002,4373 card 1025,0080 rev 00 class 0c,03,20 hdr 00
(II) PCI: 00:14:0: chip 1002,4372 card 1025,0080 rev 11 class 0c,05,00 hdr 80
(II) PCI: 00:14:1: chip 1002,4376 card 1025,0080 rev 00 class 01,01,8a hdr 00
(II) PCI: 00:14:3: chip 1002,4377 card 1025,0080 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:14:4: chip 1002,4371 card 0000,0000 rev 00 class 06,04,01 hdr 81
(II) PCI: 00:14:5: chip 1002,4370 card 1025,0079 rev 02 class 04,01,00 hdr 80
(II) PCI: 00:14:6: chip 1002,4378 card 1025,0080 rev 02 class 07,03,00 hdr 80
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:00:0: chip 1002,3150 card 1025,0080 rev 00 class 03,00,00 hdr 00
(II) PCI: 06:05:0: chip 14e4,4318 card 1468,0311 rev 02 class 02,80,00 hdr 00
(II) PCI: 06:06:0: chip 104c,8031 card a400,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 06:06:2: chip 104c,8032 card 1025,0080 rev 00 class 0c,00,10 hdr 80
(II) PCI: 06:06:3: chip 104c,8033 card 1025,0080 rev 00 class 01,80,00 hdr 80
(II) PCI: 06:06:4: chip 104c,8034 card 1025,0080 rev 00 class 08,05,00 hdr 80
(II) PCI: 06:07:0: chip 10ec,8169 card 1025,0079 rev 10 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,9), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:2:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[1] -1 0 0x00009400 - 0x000094ff (0x100) IX[B]
[2] -1 0 0x00009800 - 0x000098ff (0x100) IX[B]
[3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xc0100000 - 0xc01fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 9: bridge is at (0:6:0), (0,9,9), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:7:0), (0,4,5), BCTRL: 0x0000 (VGA_EN is cleared)
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:20:3), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 6: bridge is at (0:20:4), (0,6,8), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 6 I/O range:
[0] -1 0 0x0000a000 - 0x0000afff (0x1000) IX[B]
(II) Bus 6 non-prefetchable memory range:
[0] -1 0 0xc0200000 - 0xc02fffff (0x100000) MX[B]
(II) Bus 6 prefetchable memory range:
[0] -1 0 0x50000000 - 0x55ffffff (0x6000000) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 7: bridge is at (6:6:0), (6,7,8), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 7 I/O range:
[0] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[1] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
(II) Bus 7 prefetchable memory range:
[0] -1 0 0x50000000 - 0x53ffffff (0x4000000) MX[B]
(--) PCI:*(1:0:0) ATI Technologies Inc M24 1P [Radeon Mobility X600]
rev 0, Mem @ 0xc8000000/27, 0xc0100000/16, I/O @ 0x9000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xc0209400 - 0xc02094ff (0x100) MX[B]
[1] -1 0 0xc0208800 - 0xc02088ff (0x100) MX[B]
[2] -1 0 0xc0208c00 - 0xc0208cff (0x100) MX[B]
[3] -1 0 0xc0209000 - 0xc02090ff (0x100) MX[B]
[4] -1 0 0xc0206000 - 0xc0207fff (0x2000) MX[B]
[5] -1 0 0xc0200000 - 0xc0203fff (0x4000) MX[B]
[6] -1 0 0xc0208000 - 0xc02087ff (0x800) MX[B]
[7] -1 0 0xc0204000 - 0xc0205fff (0x2000) MX[B]
[8] -1 0 0xc0003800 - 0xc00038ff (0x100) MX[B]
[9] -1 0 0xc0003400 - 0xc00034ff (0x100) MX[B]
[10] -1 0 0xc0003000 - 0xc00033ff (0x400) MX[B]
[11] -1 0 0xc0002000 - 0xc0002fff (0x1000) MX[B]
[12] -1 0 0xc0001000 - 0xc0001fff (0x1000) MX[B]
[13] -1 0 0xc0000000 - 0xc0000fff (0x1000) MX[B]
[14] -1 0 0xc0100000 - 0xc010ffff (0x10000) MX[B](B)
[15] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[16] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[17] -1 0 0x00008410 - 0x0000841f (0x10) IX[B]
[18] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[19] -1 0 0x00000170 - 0x00000177 (0x8) IX[B]
[20] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[22] -1 0 0x00008400 - 0x0000840f (0x10) IX[B]
[23] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xc0209400 - 0xc02094ff (0x100) MX[B]
[1] -1 0 0xc0208800 - 0xc02088ff (0x100) MX[B]
[2] -1 0 0xc0208c00 - 0xc0208cff (0x100) MX[B]
[3] -1 0 0xc0209000 - 0xc02090ff (0x100) MX[B]
[4] -1 0 0xc0206000 - 0xc0207fff (0x2000) MX[B]
[5] -1 0 0xc0200000 - 0xc0203fff (0x4000) MX[B]
[6] -1 0 0xc0208000 - 0xc02087ff (0x800) MX[B]
[7] -1 0 0xc0204000 - 0xc0205fff (0x2000) MX[B]
[8] -1 0 0xc0003800 - 0xc00038ff (0x100) MX[B]
[9] -1 0 0xc0003400 - 0xc00034ff (0x100) MX[B]
[10] -1 0 0xc0003000 - 0xc00033ff (0x400) MX[B]
[11] -1 0 0xc0002000 - 0xc0002fff (0x1000) MX[B]
[12] -1 0 0xc0001000 - 0xc0001fff (0x1000) MX[B]
[13] -1 0 0xc0000000 - 0xc0000fff (0x1000) MX[B]
[14] -1 0 0xc0100000 - 0xc010ffff (0x10000) MX[B](B)
[15] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[16] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[17] -1 0 0x00008410 - 0x0000841f (0x10) IX[B]
[18] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[19] -1 0 0x00000170 - 0x00000177 (0x8) IX[B]
[20] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[22] -1 0 0x00008400 - 0x0000840f (0x10) IX[B]
[23] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xc0209400 - 0xc02094ff (0x100) MX[B]
[5] -1 0 0xc0208800 - 0xc02088ff (0x100) MX[B]
[6] -1 0 0xc0208c00 - 0xc0208cff (0x100) MX[B]
[7] -1 0 0xc0209000 - 0xc02090ff (0x100) MX[B]
[8] -1 0 0xc0206000 - 0xc0207fff (0x2000) MX[B]
[9] -1 0 0xc0200000 - 0xc0203fff (0x4000) MX[B]
[10] -1 0 0xc0208000 - 0xc02087ff (0x800) MX[B]
[11] -1 0 0xc0204000 - 0xc0205fff (0x2000) MX[B]
[12] -1 0 0xc0003800 - 0xc00038ff (0x100) MX[B]
[13] -1 0 0xc0003400 - 0xc00034ff (0x100) MX[B]
[14] -1 0 0xc0003000 - 0xc00033ff (0x400) MX[B]
[15] -1 0 0xc0002000 - 0xc0002fff (0x1000) MX[B]
[16] -1 0 0xc0001000 - 0xc0001fff (0x1000) MX[B]
[17] -1 0 0xc0000000 - 0xc0000fff (0x1000) MX[B]
[18] -1 0 0xc0100000 - 0xc010ffff (0x10000) MX[B](B)
[19] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[22] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[23] -1 0 0x00008410 - 0x0000841f (0x10) IX[B]
[24] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[25] -1 0 0x00000170 - 0x00000177 (0x8) IX[B]
[26] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[28] -1 0 0x00008400 - 0x0000840f (0x10) IX[B]
[29] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib64/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib64/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.3.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib64/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib64/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "radeon"
(II) Loading /usr/lib64/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 4.2.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "ati"
(II) Loading /usr/lib64/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 6.6.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "mouse"
(II) Loading /usr/lib64/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "kbd"
(II) Loading /usr/lib64/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) ATI: ATI driver (version 6.6.3) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
ATI ES1000 515E (PCI), ATI ES1000 5969 (PCI),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330/340/350 (A4) 4137,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP),
ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
ATI FireGL RV360 AV (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9650,
ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP),
ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE),
ATI Radeon Mobility X600 (M24) 3150 (PCIE),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE),
ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE), ATI FireGL V5000 (RV410) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 XT (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE),
ATI Radeon X800 (R420) JH (AGP), ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 SE (R420) (AGP),
ATI Radeon AIW X800 VE (R420) JT (AGP),
ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE), ATI FireGL V7100 (R423) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Radeon X800 (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 XTP (R430) (PCIE),
ATI Radeon X850 5D4C (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP)
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Radeon Mobility X600 (M24) 3150 (PCIE) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xc0209400 - 0xc02094ff (0x100) MX[B]
[5] -1 0 0xc0208800 - 0xc02088ff (0x100) MX[B]
[6] -1 0 0xc0208c00 - 0xc0208cff (0x100) MX[B]
[7] -1 0 0xc0209000 - 0xc02090ff (0x100) MX[B]
[8] -1 0 0xc0206000 - 0xc0207fff (0x2000) MX[B]
[9] -1 0 0xc0200000 - 0xc0203fff (0x4000) MX[B]
[10] -1 0 0xc0208000 - 0xc02087ff (0x800) MX[B]
[11] -1 0 0xc0204000 - 0xc0205fff (0x2000) MX[B]
[12] -1 0 0xc0003800 - 0xc00038ff (0x100) MX[B]
[13] -1 0 0xc0003400 - 0xc00034ff (0x100) MX[B]
[14] -1 0 0xc0003000 - 0xc00033ff (0x400) MX[B]
[15] -1 0 0xc0002000 - 0xc0002fff (0x1000) MX[B]
[16] -1 0 0xc0001000 - 0xc0001fff (0x1000) MX[B]
[17] -1 0 0xc0000000 - 0xc0000fff (0x1000) MX[B]
[18] -1 0 0xc0100000 - 0xc010ffff (0x10000) MX[B](B)
[19] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[22] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[23] -1 0 0x00008410 - 0x0000841f (0x10) IX[B]
[24] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[25] -1 0 0x00000170 - 0x00000177 (0x8) IX[B]
[26] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[28] -1 0 0x00008400 - 0x0000840f (0x10) IX[B]
[29] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Reloading /usr/lib64/xorg/modules/drivers//radeon_drv.so
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xc0209400 - 0xc02094ff (0x100) MX[B]
[5] -1 0 0xc0208800 - 0xc02088ff (0x100) MX[B]
[6] -1 0 0xc0208c00 - 0xc0208cff (0x100) MX[B]
[7] -1 0 0xc0209000 - 0xc02090ff (0x100) MX[B]
[8] -1 0 0xc0206000 - 0xc0207fff (0x2000) MX[B]
[9] -1 0 0xc0200000 - 0xc0203fff (0x4000) MX[B]
[10] -1 0 0xc0208000 - 0xc02087ff (0x800) MX[B]
[11] -1 0 0xc0204000 - 0xc0205fff (0x2000) MX[B]
[12] -1 0 0xc0003800 - 0xc00038ff (0x100) MX[B]
[13] -1 0 0xc0003400 - 0xc00034ff (0x100) MX[B]
[14] -1 0 0xc0003000 - 0xc00033ff (0x400) MX[B]
[15] -1 0 0xc0002000 - 0xc0002fff (0x1000) MX[B]
[16] -1 0 0xc0001000 - 0xc0001fff (0x1000) MX[B]
[17] -1 0 0xc0000000 - 0xc0000fff (0x1000) MX[B]
[18] -1 0 0xc0100000 - 0xc010ffff (0x10000) MX[B](B)
[19] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[20] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[21] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[22] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[24] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[25] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[26] -1 0 0x00008410 - 0x0000841f (0x10) IX[B]
[27] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[28] -1 0 0x00000170 - 0x00000177 (0x8) IX[B]
[29] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[31] -1 0 0x00008400 - 0x0000840f (0x10) IX[B]
[32] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
[33] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[34] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(**) RADEON(0): RADEONPreInit
(II) RADEON(0): MMIO registers at 0xc0100000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib64/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.2
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(==) RADEON(0): X server will not keep DPI constant for all screen sizes
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib64/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon Mobility X600 (M24) 3150 (PCIE)"
(ChipID = 0x3150)
(--) RADEON(0): Linear framebuffer at 0xc8000000
(II) RADEON(0): PCIE card detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel
module version 1.27.0
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib64/xorg/modules//libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) RADEON(0): Page flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=65536K, accessible=131072K
(PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 65536 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module already built-in
(II) RADEON(0): I2C bus "DDC" initialized.
(II) RADEON(0): Legacy BIOS detected
(II) RADEON(0): LVDS port is not in connector table, added in.
(II) RADEON(0): Connector0: DDCType-0, DACType-1, TMDSType--1, ConnectorType-1
(II) RADEON(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 3, Detected Type: 0
(II) RADEON(0):
(II) RADEON(0): Primary:
Monitor -- LVDS
Connector -- VGA
DAC Type -- Primary
TMDS Type -- NONE
DDC Type -- VGA_DDC
(II) RADEON(0): Secondary:
Monitor -- NONE
Connector -- Proprietary
DAC Type -- TVDAC/ExtDAC
TMDS Type -- NONE
DDC Type -- NONE
(II) RADEON(0): PLL parameters: rf=2700 rd=6 min=20000
max=47394964151360; xclk=25000
(WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head ---------
(II) RADEON(0): Panel ID string: CMO
(II) RADEON(0): Panel Size from BIOS: 1280x800
(II) RADEON(0): BIOS provided dividers will be used.
(II) RADEON(0): Total number of valid DDC mode(s) found: 0
(II) RADEON(0): Valid mode using on-chip RMX: 1280x800
(II) RADEON(0): Valid mode using on-chip RMX: 1024x768
(II) RADEON(0): Valid mode using on-chip RMX: 800x600
(II) RADEON(0): Valid mode using on-chip RMX: 640x480
(II) RADEON(0): Total number of valid FP mode(s) found: 4
(--) RADEON(0): Virtual size is 1280x800 (pitch 1280)
(**) RADEON(0): *Mode "1280x800": 71.0 MHz (scaled from 0.0 MHz), 49.3
kHz, 59.9 Hz
(II) RADEON(0): Modeline "1280x800" 71.00 1280 1328 1360 1440 800
803 809 823
(**) RADEON(0): *Mode "1024x768": 71.0 MHz (scaled from 0.0 MHz), 49.3
kHz, 59.9 Hz
(II) RADEON(0): Modeline "1024x768" 71.00 1024 1328 1360 1440 768
803 809 823
(**) RADEON(0): *Mode "800x600": 71.0 MHz (scaled from 0.0 MHz), 49.3
kHz, 59.9 Hz
(II) RADEON(0): Modeline "800x600" 71.00 800 1328 1360 1440 600 803 809 823
(**) RADEON(0): *Mode "640x480": 71.0 MHz (scaled from 0.0 MHz), 49.3
kHz, 59.9 Hz
(II) RADEON(0): Modeline "640x480" 71.00 640 1328 1360 1440 480 803 809 823
(**) RADEON(0): Default mode "640x350": 71.0 MHz (scaled from 0.0
MHz), 49.3 kHz, 59.9 Hz
(II) RADEON(0): Modeline "640x350" 71.00 640 1328 1360 1440 350 803 809 823
(**) RADEON(0): Default mode "640x400": 71.0 MHz (scaled from 0.0
MHz), 49.3 kHz, 59.9 Hz
(II) RADEON(0): Modeline "640x400" 71.00 640 1328 1360 1440 400 803 809 823
(**) RADEON(0): Default mode "720x400": 71.0 MHz (scaled from 0.0
MHz), 49.3 kHz, 59.9 Hz
(II) RADEON(0): Modeline "720x400" 71.00 720 1328 1360 1440 400 803 809 823
(**) RADEON(0): Default mode "832x624": 71.0 MHz (scaled from 0.0
MHz), 49.3 kHz, 59.9 Hz
(II) RADEON(0): Modeline "832x624" 71.00 832 1328 1360 1440 624 803 809 823
(**) RADEON(0): Default mode "1152x768": 71.0 MHz (scaled from 0.0
MHz), 49.3 kHz, 59.9 Hz
(II) RADEON(0): Modeline "1152x768" 71.00 1152 1328 1360 1440 768
803 809 823
(==) RADEON(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib64/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.2
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xc0100000 - 0xc010ffff (0x10000) MX[B]
[1] 0 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0xc0209400 - 0xc02094ff (0x100) MX[B]
[7] -1 0 0xc0208800 - 0xc02088ff (0x100) MX[B]
[8] -1 0 0xc0208c00 - 0xc0208cff (0x100) MX[B]
[9] -1 0 0xc0209000 - 0xc02090ff (0x100) MX[B]
[10] -1 0 0xc0206000 - 0xc0207fff (0x2000) MX[B]
[11] -1 0 0xc0200000 - 0xc0203fff (0x4000) MX[B]
[12] -1 0 0xc0208000 - 0xc02087ff (0x800) MX[B]
[13] -1 0 0xc0204000 - 0xc0205fff (0x2000) MX[B]
[14] -1 0 0xc0003800 - 0xc00038ff (0x100) MX[B]
[15] -1 0 0xc0003400 - 0xc00034ff (0x100) MX[B]
[16] -1 0 0xc0003000 - 0xc00033ff (0x400) MX[B]
[17] -1 0 0xc0002000 - 0xc0002fff (0x1000) MX[B]
[18] -1 0 0xc0001000 - 0xc0001fff (0x1000) MX[B]
[19] -1 0 0xc0000000 - 0xc0000fff (0x1000) MX[B]
[20] -1 0 0xc0100000 - 0xc010ffff (0x10000) MX[B](B)
[21] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[22] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[23] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[24] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[25] 0 0 0x00009000 - 0x000090ff (0x100) IX[B]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[27] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[28] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[29] -1 0 0x00008410 - 0x0000841f (0x10) IX[B]
[30] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[31] -1 0 0x00000170 - 0x00000177 (0x8) IX[B]
[32] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[33] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[34] -1 0 0x00008400 - 0x0000840f (0x10) IX[B]
[35] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
[36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[37] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(**) RADEON(0): RADEONScreenInit c8000000 0
(**) RADEON(0): Map: 0xc8000000, 0x04000000
(==) RADEON(0): Write-combining range (0xc8000000,0x4000000)
(**) RADEON(0): RADEONSave
(**) RADEON(0): RADEONSaveMode(0x708488)
(**) RADEON(0): Read: 0x00180006 0x0002003f 0x00000000
(**) RADEON(0): Read: rd=6, fd=63, pd=2
(**) RADEON(0): RADEONSaveMode returns 0x708488
(II) RADEON(0): Dynamic Clock Scaling Disabled
(==) RADEON(0): Using 24 bit depth buffer
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [drm] DRM interface version 1.3
(II) RADEON(0): [drm] created "radeon" driver at busid "pci:0000:01:00.0"
(II) RADEON(0): [drm] added 8192 byte SAREA at 0x1efff000
(II) RADEON(0): [drm] mapped SAREA 0x1efff000 to 0x2b1bc8ff9000
(II) RADEON(0): [drm] framebuffer handle = 0xc8000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): [pci] 8192 kB allocated with handle 0x016ad200
(II) RADEON(0): [pci] ring handle = 0x1f000000
(II) RADEON(0): [pci] Ring mapped at 0x2b1bc8ffb000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0x2efff000
(II) RADEON(0): [pci] Ring read ptr mapped at 0x2b1bc90fc000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0x1f001000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0x2b1bc90fd000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0x1f002000
(II) RADEON(0): [pci] GART Texture map mapped at 0x2b1bc92fd000
(II) RADEON(0): [drm] register handle = 0xc0100000
(II) RADEON(0): [dri] Visual configs initialized
(**) RADEON(0): DRI New memory map param
(**) RADEON(0): RADEONInitMemoryMap() :
(**) RADEON(0): mem_size : 0x04000000
(**) RADEON(0): MC_FB_LOCATION : 0xcbffc800
(**) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(**) RADEON(0): RADEONModeInit()
1280x800 71.00 1280 1328 1360 1440 800 803 809 823 (24,32)
1280x800 71.00 1280 1328 1360 1440 800 803 809 823 (24,32)
(**) RADEON(0): Pitch = 10485920 bytes (virtualX = 1280, displayWidth = 1280)
(II) RADEON(0): BIOS HotKeys Disabled
(**) RADEON(0): RADEONInit returns 0x708e38
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x708e38)
(**) RADEON(0): RADEONRestoreMemMapRegisters() :
(**) RADEON(0): MC_FB_LOCATION : 0xcbffc800
(**) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(**) RADEON(0): Map Changed ! Applying ...
(**) RADEON(0): Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): GRPH_BUFFER_CNTL from 30004c4c to 20157c7c
(**) RADEON(0): RADEONSaveScreen(0)
(II) RADEON(0): Depth moves disabled by default
(**) RADEON(0): Setting up initial surfaces
(**) RADEON(0): Initializing fb layer
(**) RADEON(0): Setting up accel memmap
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
(II) RADEON(0): Reserved area from (0,800) to (1280,802)
(II) RADEON(0): Largest offscreen area available: 1280 x 7389
(II) RADEON(0): Will use back buffer at offset 0x102c000
(II) RADEON(0): Will use depth buffer at offset 0x1414000
(II) RADEON(0): Will use 32 kb for PCI GART table at offset 0x3ff8000
(II) RADEON(0): Will use 40960 kb for textures at offset 0x17fc000
(**) RADEON(0): Initializing backing store
(==) RADEON(0): Backing store disabled
(**) RADEON(0): DRI PCIGART param
(**) RADEON(0): DRI Finishing init !
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [DRI] installation complete
(**) RADEON(0): EngineRestore (32/32)
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 11
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(II) RADEON(0): Direct rendering enabled
(**) RADEON(0): Setting up final surfaces
(**) RADEON(0): Initializing Acceleration
(II) RADEON(0): Render acceleration unsupported on Radeon 9500/9700 and newer.
(II) RADEON(0): Render acceleration disabled
(**) RADEON(0): EngineInit (32/32)
(**) RADEON(0): Pitch for acceleration = 160
(**) RADEON(0): EngineRestore (32/32)
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(**) RADEON(0): Initializing DPMS
(**) RADEON(0): Initializing Cursor
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 802)
(II) RADEON(0): Largest offscreen area available: 1280 x 7385
(**) RADEON(0): Initializing color map
(**) RADEON(0): Initializing DGA
(**) RADEON(0): Initializing Xv
(II) RADEON(0): No video input capabilities detected and no
information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib64/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(**) RADEON(0): RADEONScreenInit finished
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib64/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(**) Option "Protocol" "Auto"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "Auto"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse1: Buttons: 11
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc102"
(**) Keyboard1: XkbModel: "pc102"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "XkbOptions" "ctrl:ctrl_aa,caps:capslock"
(**) Keyboard1: XkbOptions: "ctrl:ctrl_aa,caps:capslock"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(--) Mouse1: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse1: ps2EnableDataReporting: succeeded
/etc/X11/xorg.conf:
# File generated by xorgconfig.
#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#
# **********************************************************************
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
# Load "type1"
Load "freetype"
# Load "xtt"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#
FontPath "/usr/share/fonts/misc/"
# FontPath "/usr/share/fonts/TTF/"
# FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "acpi"
Option "XkbLayout" "us"
Option "XkbOptions"
"ctrl:ctrl_aa,caps:capslock,altwin:meta_alt,compose:menu"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Laptop LCD Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 64.3
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-70
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "ATI Xpress 200M 64MB"
Driver "vga"
# unsupported card
#VideoRam 65536
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "ATI Xpress 200M 64MB"
Monitor "Laptop LCD Monitor"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
emerge --info:
Portage 2.1.2.9 (default-linux/amd64/2007.0/desktop, gcc-4.1.2,
glibc-2.5-r3, 2.6.22-rc3 x86_64)
=================================================================
System uname: 2.6.22-rc3 x86_64 AMD Turion(tm) 64 Mobile Technology ML-34
Gentoo Base System release 1.12.10
Timestamp of tree: Wed, 06 Jun 2007 01:30:01 +0000
dev-java/java-config: 1.3.7, 2.0.33-r1
dev-lang/python: 2.4.4-r4
dev-python/pycrypto: 2.0.1-r5
sys-apps/sandbox: 1.2.18.1
sys-devel/autoconf: 2.13, 2.61
sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2, 1.10
sys-devel/binutils: 2.17
sys-devel/gcc-config: 1.3.16
sys-devel/libtool: 1.5.23b
virtual/os-headers: 2.6.21
ACCEPT_KEYWORDS="amd64 ~amd64"
AUTOCLEAN="yes"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-O2 -pipe -finline-functions -march=athlon64 -msse3"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/3.5/env /usr/kde/3.5/share/config
/usr/kde/3.5/shutdown /usr/share/X11/xkb /usr/share/config"
CONFIG_PROTECT_MASK="/etc/env.d /etc/env.d/java/ /etc/gconf
/etc/terminfo /etc/texmf/web2c"
CXXFLAGS="-O2 -pipe -finline-functions -march=athlon64 -msse3"
DISTDIR="/usr/portage/distfiles"
FEATURES="ccache distlocks metadata-transfer sandbox sfperms strict
userpriv usersandbox"
GENTOO_MIRRORS="http://adelie.polymtl.ca/
http://gentoo.mirrors.tds.net/gentoo
http://gentoo.osuosl.org/ http://mirrors.acm.cs.rpi.edu/gentoo/
http://mirror.usu.edu/mirrors/gentoo/
http://gentoo.chem.wisc.edu/gentoo/
http://gentoo.mirrors.pair.com/ http://mirror.datapipe.net/gentoo
http://gentoo.cites.uiuc.edu/pub/gentoo/
http://distro.ibiblio.org/pub/linux/distributions/gentoo/"
LINGUAS="en en_US"
MAKEOPTS="-j2"
PKGDIR="/usr/portage/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times
--compress --force --whole-file --delete --delete-after --stats
--timeout=180 --exclude=/distfiles --exclude=/local
--exclude=/packages --filter=H_**/files/digest-*"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="3dnow 3dnowext 3ds 64bit 7zip S3TC X Xaw3d a52 aac acct acl acpi
activefilter ada additions adplug adsl agg aiglx alisp alsa amd amd64
amr animgif ansi aoss aotuv apache2 arts artworkextra asf aspnet2
async automount background backtrace bash-completion battery bcmath
bcp bdf berkdb bidi binary-drivers bitmap-fonts bittorrent blas
blender-game branding buttons bzip2 cairo caps cardbus catalogs cdda
cddb cdinstall cdparanoia cdr cdrom charconv chroot cjk cli colordiff
compress connectionstatus console cpio cpufreq cracklib crypt cscope
css cups curl curlwrappers dbus dc1394 dcraw debugger deprecated
depth32 device-mapper directfb discouraged disk-partition divx dmi dnd
doc dri dts dv dvd dvdnav dvdr dvdread editor eds elf elisp emacs
emboss emerald encode epydoc erandom esd evo examples exif expat
extensions extra-cardsets extrafilters faillog fam fame fastcgi fat
fbcon ffmpeg fftw firefox flac flash flexresp flexresp2 fontconfig
fortran ftp fuse gb gcj gconf gd gdbm gif gimp gimpprint glibc-omitfp
glitz gmail gmedia gnome gnutls gphoto2 gpm gstreamer gtalk gtk
gtkhtml guile hal hash hddtemp hfs highlight hpn html httpd ibam iconv
icu idea idn ieee1394 imagemagick inkjar inline ipod ipv6 isdnlog
jabber jack java javascript jbig jce jcs jfs jikes john joystick jpeg
jpeg2k justify kde kdecards kerberos keyring lame lapack latex lcms
ldap leim libcaca libdsk libg++ libnotify libsamplerate libwww live
lm_sensors lzo lzw m17n-lib mad matroska matrox memlimit midi mikmod
mjpeg mmap mmx mmxext mng mod mono mozdevelop mozdom mp3 mp4 mpeg
mplayer mpm-prefork msn mudflap ncurses netpbm network nls nntp nowin
nptl nptlonly ntfs ntlm numeric offensive office ogg ogre
on-the-fly-crypt openal opengl openmp oss pam pam_chroot pam_console
pam_timestamp parse-clocks pascal pcmcia pcntl pcre pda pdf perl
plotutils plugins pmu png pnm povray pppd python qt3 qt3support qt4
quicktime radio radius rar readline realmedia recode reflection regex
reiser4 reiserfs restrict-javascript rtc ruby rubytests samba scanner
sdl sdl-image sdl-sound sensord session sharedext sharedmem shorten
simplexml snmp sockets sound source speex spell spl sse sse2 ssl
stream subtitles subversion svg svgz symlink sysfs szip t1lib tcl tcpd
tetex texteffect tga theora threads tidy tiff timidity tk tokenizer
transcode truetype truetype-fonts type1-fonts ucs2 ucs4 unicode usb
uuencode v4l v4l2 vcd vim vim-syntax vim-with-x vorbis wifi wma wmf
wmp wxwindows x264 xattr xcb xcf xchatdccserver xchattext xcomposite
xemacs xforms xfs xft xim xine xinerama xml xorg xpm xprint
xscreensaver xsl xslt xterm xv xvid xvmc zip zlib" ALSA_CARDS="ali5451
als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370
ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3
trident usb-audio via82xx via82xx-modem ymfpci"
ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty
extplug file hooks iec958 ioplug ladspa lfloat linear meter mulaw
multi null plug rate route share shm softvol" ELIBC="glibc"
INPUT_DEVICES="keyboard mouse synaptics" KERNEL="linux"
LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb
ncurses text" LINGUAS="en en_US" USERLAND="GNU" VIDEO_CARDS="dummy
fbdev radeon v4l vesa vga vmware"
Unset: CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LANG, LC_ALL,
LDFLAGS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS,
PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAY
X is ignoring every kill signal!
this command does NOT kill X (yes it ignores SIGKILL):
#for a in 1 2 3 4 5 6 7 8 9 11 13 14 15 17 19; do kill -n $a 18068; done
ssh dies after <Magic>I, after the RSE, before the KUB
WTF?!?!?!?
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [gentoo-user] X server won't load
2007-06-10 19:06 ` Andrey Vul
@ 2007-06-10 19:25 ` Andrey Vul
2007-06-11 9:07 ` Hans-Werner Hilse
0 siblings, 1 reply; 18+ messages in thread
From: Andrey Vul @ 2007-06-10 19:25 UTC (permalink / raw
To: gentoo-user
I forgot to add /usr/src/linux/.config to my previous post!
So here it is (/usr/src/linux/.config)(zcat /proc/config.gz):
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.22-rc3
# Sun Jun 10 13:23:17 2007
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ZONE_DMA32=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_DMI=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_IPC_NS=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
CONFIG_MK8=y
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_START=0x200000
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_K8_NB=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION=""
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_SLEEP_PROC_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_ACPI_CPUFREQ=y
#
# shared options
#
CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y
# CONFIG_X86_SPEEDSTEP_LIB is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
CONFIG_NF_CONNTRACK_ENABLED=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CT_ACCT=y
# CONFIG_NF_CONNTRACK_MARK is not set
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
# CONFIG_NF_CONNTRACK_FTP is not set
# CONFIG_NF_CONNTRACK_H323 is not set
# CONFIG_NF_CONNTRACK_IRC is not set
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CONNTRACK_TFTP is not set
# CONFIG_NF_CT_NETLINK is not set
CONFIG_NETFILTER_XTABLES=y
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_IPRANGE=y
CONFIG_IP_NF_MATCH_TOS=y
CONFIG_IP_NF_MATCH_RECENT=y
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_AH is not set
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_MATCH_OWNER=y
CONFIG_IP_NF_MATCH_ADDRTYPE=y
CONFIG_IP_NF_FILTER=y
# CONFIG_IP_NF_TARGET_REJECT is not set
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_TARGET_NETMAP=y
# CONFIG_IP_NF_TARGET_SAME is not set
# CONFIG_NF_NAT_SNMP_BASIC is not set
# CONFIG_NF_NAT_FTP is not set
# CONFIG_NF_NAT_IRC is not set
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
# CONFIG_NF_NAT_SIP is not set
# CONFIG_IP_NF_MANGLE is not set
CONFIG_IP_NF_RAW=y
# CONFIG_IP_NF_ARPTABLES is not set
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
# CONFIG_NF_CONNTRACK_IPV6 is not set
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
CONFIG_CFG80211=y
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211=y
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=y
CONFIG_IEEE80211_CRYPT_CCMP=y
CONFIG_IEEE80211_CRYPT_TKIP=y
CONFIG_IEEE80211_SOFTMAC=y
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
# CONFIG_MSI_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_BLINK is not set
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECS=y
# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
CONFIG_BLK_DEV_IDEACPI=y
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_ATIIXP=y
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
CONFIG_BLK_DEV_PDC202XX_NEW=y
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=4000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=y
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=y
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_ESP_CORE is not set
# CONFIG_SCSI_SRP is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
CONFIG_PATA_ATIIXP=y
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
#
# Fusion MPT device support
#
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
# CONFIG_FUSION_FC is not set
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=y
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
#
# Controllers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=y
#
# Protocols
#
CONFIG_IEEE1394_VIDEO1394=y
CONFIG_IEEE1394_SBP2=y
CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
CONFIG_IEEE1394_ETH1394=y
# CONFIG_IEEE1394_DV1394 is not set
CONFIG_IEEE1394_RAWIO=y
#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
# CONFIG_R8169_NAPI is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS_USB is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set
CONFIG_BCM43XX=m
CONFIG_BCM43XX_DEBUG=y
CONFIG_BCM43XX_DMA=y
CONFIG_BCM43XX_PIO=y
CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
# CONFIG_BCM43XX_DMA_MODE is not set
# CONFIG_BCM43XX_PIO_MODE is not set
# CONFIG_ZD1211RW is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=800
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_INTEL is not set
CONFIG_HW_RANDOM_AMD=y
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
CONFIG_I2C_PIIX4=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_K8TEMP=y
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
CONFIG_VIDEO_ADV_DEBUG=y
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_CX25840=m
CONFIG_VIDEO_CX2341X=m
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
CONFIG_V4L_USB_DRIVERS=y
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_29XXX=y
CONFIG_VIDEO_PVRUSB2_24XXX=y
CONFIG_VIDEO_PVRUSB2_SYSFS=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_USBVISION=m
# CONFIG_USB_VICAM is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_QUICKCAM_MESSENGER is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
# CONFIG_USB_W9968CF is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
CONFIG_USB_ZC0301=m
# CONFIG_USB_PWC is not set
# CONFIG_USB_ZR364XX is not set
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_USB_DSBR is not set
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_PROGEAR is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=256
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
CONFIG_FONT_ACORN_8x8=y
# CONFIG_FONT_MINI_4x6 is not set
CONFIG_FONT_SUN8x16=y
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
# CONFIG_SND_PCM_OSS is not set
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
CONFIG_SND_ATIIXP=y
CONFIG_SND_ATIIXP_MODEM=y
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_AC97_POWER_SAVE=y
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
#
# HID Devices
#
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD Card Drivers
#
CONFIG_MMC_BLOCK=y
#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
# CONFIG_MMC_WBSD is not set
CONFIG_MMC_TIFM_SD=y
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
# CONFIG_EDAC is not set
#
# Real Time Clock
#
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# Virtualization
#
# CONFIG_KVM is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=y
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
# CONFIG_NLS_ISO8859_6 is not set
CONFIG_NLS_ISO8859_7=y
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_IOMMU_DEBUG is not set
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=m
CONFIG_CRYPTO_XCBC=m
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_TGR192=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_BLOWFISH=y
# CONFIG_CRYPTO_TWOFISH is not set
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CAMELLIA=y
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [gentoo-user] X server won't load
2007-06-10 19:25 ` Andrey Vul
@ 2007-06-11 9:07 ` Hans-Werner Hilse
2007-06-11 16:37 ` Andrey Vul
0 siblings, 1 reply; 18+ messages in thread
From: Hans-Werner Hilse @ 2007-06-11 9:07 UTC (permalink / raw
To: gentoo-user
Hi,
On Sun, 10 Jun 2007 15:25:23 -0400 "Andrey Vul" <andrey.vul@gmail.com>
wrote:
> I forgot to add /usr/src/linux/.config to my previous post!
Oh dear, now you added up to 140kB of almost useless information getting
blasted over the world...
Did you see /any/ error in there? Well, I didn't. So the only
suggestions I can give is
- reemerge drm driver,
- reemerge X video driver,
- if all of this doesn't help, reemerge X server and libraries.
If all of this does not work, blame your experimental kernel...
-hwh
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [gentoo-user] X server won't load
2007-06-11 9:07 ` Hans-Werner Hilse
@ 2007-06-11 16:37 ` Andrey Vul
2007-06-11 16:39 ` Andrey Vul
0 siblings, 1 reply; 18+ messages in thread
From: Andrey Vul @ 2007-06-11 16:37 UTC (permalink / raw
To: gentoo-user
drm driver is part of the kernel; should I upgrade to -rc4 or
downgrade to 2.6.21.4?
On 6/11/07, Hans-Werner Hilse <hilse@web.de> wrote:
> Hi,
>
> On Sun, 10 Jun 2007 15:25:23 -0400 "Andrey Vul" <andrey.vul@gmail.com>
> wrote:
>
> > I forgot to add /usr/src/linux/.config to my previous post!
>
> Oh dear, now you added up to 140kB of almost useless information getting
> blasted over the world...
>
> Did you see /any/ error in there? Well, I didn't. So the only
> suggestions I can give is
> - reemerge drm driver,
> - reemerge X video driver,
> - if all of this doesn't help, reemerge X server and libraries.
>
> If all of this does not work, blame your experimental kernel...
>
> -hwh
> --
> gentoo-user@gentoo.org mailing list
>
>
--
---------------------
Andrey Vul
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [gentoo-user] X server won't load
2007-06-11 16:37 ` Andrey Vul
@ 2007-06-11 16:39 ` Andrey Vul
2007-06-11 17:11 ` Hans-Werner Hilse
0 siblings, 1 reply; 18+ messages in thread
From: Andrey Vul @ 2007-06-11 16:39 UTC (permalink / raw
To: gentoo-user
On 6/11/07, Andrey Vul <andrey.vul@gmail.com> wrote:
> drm driver is part of the kernel; should I upgrade to -rc4 or
> downgrade to 2.6.21.4?
>
But first I'll remove the symlink USE flag so that dependencies won't
screw up my system.
I'll try -rc4 first, if that doesn't work, I'll email my .config and
Xorg.0.log (the driver details) to lkml.
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [gentoo-user] X server won't load
2007-06-11 16:39 ` Andrey Vul
@ 2007-06-11 17:11 ` Hans-Werner Hilse
2007-06-11 22:34 ` Andrey Vul
0 siblings, 1 reply; 18+ messages in thread
From: Hans-Werner Hilse @ 2007-06-11 17:11 UTC (permalink / raw
To: gentoo-user
Hi,
On Mon, 11 Jun 2007 12:39:36 -0400 "Andrey Vul" <andrey.vul@gmail.com>
wrote:
> On 6/11/07, Andrey Vul <andrey.vul@gmail.com> wrote:
> > drm driver is part of the kernel; should I upgrade to -rc4 or
> > downgrade to 2.6.21.4?
I'm pretty unsure, but reverting to a stable version is at least worth
a try.
BTW: The drm drivers are developed out of tree, AFAIK. I don't really
know how good they're currently in sync. Gentoo has the "x11-drm"
ebuild for the out-of-tree drivers.
> [...]
> I'll try -rc4 first, if that doesn't work, I'll email my .config and
> Xorg.0.log (the driver details) to lkml.
Don't. You did understand that there doesn't seem to be any indication
in what you posted here? So why even bother wasting even more peoples'
bandwith? Examine the Xorg log file yourself, especially regarding
warnings and errors. If it doesn't contain any, you just need to tell
what card and driver you're using. On LKML, the .config /might/ be
interesting.
If you feel that it is absolutely necessary to make Xorg.0.log
and .config available, put them online on some kind of webspace. As a
rule of thumb: Don't attach large files to mails to mailing lists.
-hwh
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [gentoo-user] X server won't load
2007-06-11 17:11 ` Hans-Werner Hilse
@ 2007-06-11 22:34 ` Andrey Vul
2007-06-12 7:59 ` Mick
0 siblings, 1 reply; 18+ messages in thread
From: Andrey Vul @ 2007-06-11 22:34 UTC (permalink / raw
To: gentoo-user
Bingo, fixed the problem by removing drm driver from the kernel.
Is x11-drm stable?
On 6/11/07, Hans-Werner Hilse <hilse@web.de> wrote:
> Hi,
>
> On Mon, 11 Jun 2007 12:39:36 -0400 "Andrey Vul" <andrey.vul@gmail.com>
> wrote:
>
> > On 6/11/07, Andrey Vul <andrey.vul@gmail.com> wrote:
> > > drm driver is part of the kernel; should I upgrade to -rc4 or
> > > downgrade to 2.6.21.4?
>
> I'm pretty unsure, but reverting to a stable version is at least worth
> a try.
>
> BTW: The drm drivers are developed out of tree, AFAIK. I don't really
> know how good they're currently in sync. Gentoo has the "x11-drm"
> ebuild for the out-of-tree drivers.
>
> > [...]
> > I'll try -rc4 first, if that doesn't work, I'll email my .config and
> > Xorg.0.log (the driver details) to lkml.
>
> Don't. You did understand that there doesn't seem to be any indication
> in what you posted here? So why even bother wasting even more peoples'
> bandwith? Examine the Xorg log file yourself, especially regarding
> warnings and errors. If it doesn't contain any, you just need to tell
> what card and driver you're using. On LKML, the .config /might/ be
> interesting.
>
> If you feel that it is absolutely necessary to make Xorg.0.log
> and .config available, put them online on some kind of webspace. As a
> rule of thumb: Don't attach large files to mails to mailing lists.
>
> -hwh
> --
> gentoo-user@gentoo.org mailing list
>
>
--
---------------------
Andrey Vul
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [gentoo-user] X server won't load
2007-06-11 22:34 ` Andrey Vul
@ 2007-06-12 7:59 ` Mick
2007-06-12 14:18 ` Andrey Vul
0 siblings, 1 reply; 18+ messages in thread
From: Mick @ 2007-06-12 7:59 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 348 bytes --]
On Monday 11 June 2007 23:34, Andrey Vul wrote:
> Bingo, fixed the problem by removing drm driver from the kernel.
>
> Is x11-drm stable?
I am using x11-base/x11-drm-20070314 which is stable now.
PS. This M/L prefers top-posting, so, in gmail please click to show quoted
text and write your response at the bottom.
--
Regards,
Mick
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [gentoo-user] X server won't load
2007-06-12 7:59 ` Mick
@ 2007-06-12 14:18 ` Andrey Vul
0 siblings, 0 replies; 18+ messages in thread
From: Andrey Vul @ 2007-06-12 14:18 UTC (permalink / raw
To: gentoo-user
On 6/12/07, Mick <michaelkintzios@gmail.com> wrote:
> On Monday 11 June 2007 23:34, Andrey Vul wrote:
> > Bingo, fixed the problem by removing drm driver from the kernel.
> >
> > Is x11-drm stable?
>
> I am using x11-base/x11-drm-20070314 which is stable now.
>
> PS. This M/L prefers top-posting, so, in gmail please click to show quoted
> text and write your response at the bottom.
> --
> Regards,
> Mick
>
>
Even in 2.6.21.4 (current stable), the kernel tree's radeon driver is
buggy causing 100% CPU usage and a screen of death. (modprobe radeon,
then after a few minutes, the local system is dead and I need to use
SSH to read dmesg. But that doesn't help much because there is no
configuration option in the kernel to make the radeon driver output
with debug verbosity. But it did help a little: my card is Mobility
Radeon X600 (RV480) and the drm driver is using R300 microcode, which
means that the driver is very buggy).
At least there is no kernel panic, which means that I can <Magic>S,
<Magic>B, where <Magic> is <Alt><SysRq>
---------------------
Andrey Vul
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2007-06-12 14:26 UTC | newest]
Thread overview: 18+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-06-10 3:29 [gentoo-user] X server won't load Andrey Vul
2007-06-10 13:07 ` Hans-Werner Hilse
2007-06-10 14:10 ` Andrey Vul
2007-06-10 15:05 ` Hans-Werner Hilse
2007-06-10 16:41 ` Andrey Vul
2007-06-10 16:58 ` Norberto Bensa
2007-06-10 17:26 ` Andrey Vul
2007-06-10 18:03 ` Andrey Vul
2007-06-10 18:32 ` Andrey Vul
2007-06-10 19:06 ` Andrey Vul
2007-06-10 19:25 ` Andrey Vul
2007-06-11 9:07 ` Hans-Werner Hilse
2007-06-11 16:37 ` Andrey Vul
2007-06-11 16:39 ` Andrey Vul
2007-06-11 17:11 ` Hans-Werner Hilse
2007-06-11 22:34 ` Andrey Vul
2007-06-12 7:59 ` Mick
2007-06-12 14:18 ` Andrey Vul
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox