* [gentoo-user] xscreensaver compilation failed
@ 2008-11-03 8:01 Ducky
2008-11-03 8:10 ` Jeremy McSpadden
0 siblings, 1 reply; 9+ messages in thread
From: Ducky @ 2008-11-03 8:01 UTC (permalink / raw
To: gentoo-user
Hello,
My xscreensaver failed to build. Not sure what's wrong. I've tried
versions starting from 5.05.
[ebuild N ] x11-misc/xscreensaver-5.07 USE="jpeg opengl pam suid
xinerama -new-login" 0 kB
I tried to disable each options, it didn't help much.
It failed at econf.
...
config.status: creating driver/XScreenSaver.ad
config.status: creating config.h
config.status: executing default-1 commands
config.status: executing po/stamp-it commands
config.status: error: po/Makefile.in.in was not created by intltoolize.
...
...
*
* ERROR: x11-misc/xscreensaver-5.07 failed.
* Call stack:
* ebuild.sh, line 49: Called src_compile
* environment, line 2950: Called econf
'--with-x-app-defaults=/usr/share/X11/app-defaults'
'--with-hackdir=/usr/lib/misc/xscreensaver'
'--with-configdir=/usr/share/xscreensaver/config'
'--x-libraries=/usr/lib' '--x-includes=/usr/include' '--with-dpms-ext'
'--with-xf86vmode-ext' '--with-xf86gamma-ext' '--with-randr-ext'
'--with-proc-interrupts' '--with-xpm' '--with-xshm-ext'
'--with-xdbe-ext' '--enable-locking' '--without-kerberos'
'--without-gle' '--with-gtk' '--with-pixbuf' '--with-setuid-hacks'
'--without-login-manager' '--with-xinerama-ext' '--with-pam'
'--without-gl' '--with-jpeg'
* ebuild.sh, line 525: Called die
* The specific snippet of code:
* die "econf failed"
* The die message:
* econf failed
*
* If you need support, post the topmost build error, and the call
stack if relevant.
* A complete build log is located at
'/var/tmp/portage/x11-misc/xscreensaver-5.07/temp/build.log'.
* The ebuild environment file is located at
'/var/tmp/portage/x11-misc/xscreensaver-5.07/temp/environment'.
*
Any idea?
Thanks,
--
./D
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [gentoo-user] xscreensaver compilation failed
2008-11-03 8:01 [gentoo-user] xscreensaver compilation failed Ducky
@ 2008-11-03 8:10 ` Jeremy McSpadden
2008-11-03 8:17 ` Ducky
0 siblings, 1 reply; 9+ messages in thread
From: Jeremy McSpadden @ 2008-11-03 8:10 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 1912 bytes --]
On Mon, 2008-11-03 at 16:01 +0800, Ducky wrote:
> Hello,
>
> My xscreensaver failed to build. Not sure what's wrong. I've tried
> versions starting from 5.05.
>
> [ebuild N ] x11-misc/xscreensaver-5.07 USE="jpeg opengl pam suid
> xinerama -new-login" 0 kB
>
> I tried to disable each options, it didn't help much.
>
> It failed at econf.
>
> ...
> config.status: creating driver/XScreenSaver.ad
> config.status: creating config.h
> config.status: executing default-1 commands
> config.status: executing po/stamp-it commands
> config.status: error: po/Makefile.in.in was not created by intltoolize.
> ...
> ...
> *
> * ERROR: x11-misc/xscreensaver-5.07 failed.
> * Call stack:
> * ebuild.sh, line 49: Called src_compile
> * environment, line 2950: Called econf
> '--with-x-app-defaults=/usr/share/X11/app-defaults'
> '--with-hackdir=/usr/lib/misc/xscreensaver'
> '--with-configdir=/usr/share/xscreensaver/config'
> '--x-libraries=/usr/lib' '--x-includes=/usr/include' '--with-dpms-ext'
> '--with-xf86vmode-ext' '--with-xf86gamma-ext' '--with-randr-ext'
> '--with-proc-interrupts' '--with-xpm' '--with-xshm-ext'
> '--with-xdbe-ext' '--enable-locking' '--without-kerberos'
> '--without-gle' '--with-gtk' '--with-pixbuf' '--with-setuid-hacks'
> '--without-login-manager' '--with-xinerama-ext' '--with-pam'
> '--without-gl' '--with-jpeg'
> * ebuild.sh, line 525: Called die
> * The specific snippet of code:
> * die "econf failed"
> * The die message:
> * econf failed
> *
> * If you need support, post the topmost build error, and the call
> stack if relevant.
> * A complete build log is located at
> '/var/tmp/portage/x11-misc/xscreensaver-5.07/temp/build.log'.
> * The ebuild environment file is located at
> '/var/tmp/portage/x11-misc/xscreensaver-5.07/temp/environment'.
> *
>
> Any idea?
>
> Thanks,
I'd try posting the full log, not the snippets you think are relevant.
[-- Attachment #2: Type: text/html, Size: 2134 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [gentoo-user] xscreensaver compilation failed
2008-11-03 8:10 ` Jeremy McSpadden
@ 2008-11-03 8:17 ` Ducky
2008-11-03 8:17 ` Ducky
2008-11-03 8:21 ` Jeremy McSpadden
0 siblings, 2 replies; 9+ messages in thread
From: Ducky @ 2008-11-03 8:17 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 2052 bytes --]
I'm sorry. I've now attached the build.log.
On Mon, Nov 3, 2008 at 4:10 PM, Jeremy McSpadden <deface@uberpenguin.net> wrote:
> On Mon, 2008-11-03 at 16:01 +0800, Ducky wrote:
>
> Hello,
>
> My xscreensaver failed to build. Not sure what's wrong. I've tried
> versions starting from 5.05.
>
> [ebuild N ] x11-misc/xscreensaver-5.07 USE="jpeg opengl pam suid
> xinerama -new-login" 0 kB
>
> I tried to disable each options, it didn't help much.
>
> It failed at econf.
>
> ...
> config.status: creating driver/XScreenSaver.ad
> config.status: creating config.h
> config.status: executing default-1 commands
> config.status: executing po/stamp-it commands
> config.status: error: po/Makefile.in.in was not created by intltoolize.
> ...
> ...
> *
> * ERROR: x11-misc/xscreensaver-5.07 failed.
> * Call stack:
> * ebuild.sh, line 49: Called src_compile
> * environment, line 2950: Called econf
> '--with-x-app-defaults=/usr/share/X11/app-defaults'
> '--with-hackdir=/usr/lib/misc/xscreensaver'
> '--with-configdir=/usr/share/xscreensaver/config'
> '--x-libraries=/usr/lib' '--x-includes=/usr/include' '--with-dpms-ext'
> '--with-xf86vmode-ext' '--with-xf86gamma-ext' '--with-randr-ext'
> '--with-proc-interrupts' '--with-xpm' '--with-xshm-ext'
> '--with-xdbe-ext' '--enable-locking' '--without-kerberos'
> '--without-gle' '--with-gtk' '--with-pixbuf' '--with-setuid-hacks'
> '--without-login-manager' '--with-xinerama-ext' '--with-pam'
> '--without-gl' '--with-jpeg'
> * ebuild.sh, line 525: Called die
> * The specific snippet of code:
> * die "econf failed"
> * The die message:
> * econf failed
> *
> * If you need support, post the topmost build error, and the call
> stack if relevant.
> * A complete build log is located at
> '/var/tmp/portage/x11-misc/xscreensaver-5.07/temp/build.log'.
> * The ebuild environment file is located at
> '/var/tmp/portage/x11-misc/xscreensaver-5.07/temp/environment'.
> *
>
> Any idea?
>
> Thanks,
>
> I'd try posting the full log, not the snippets you think are relevant.
>
>
>
--
./D
[-- Attachment #2: environment --]
[-- Type: application/octet-stream, Size: 114652 bytes --]
ALSA_CARDS=
ALSA_PCM_PLUGINS='adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol'
APACHE2_MODULES='actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias'
ARCH=x86
AT_GNUCONF_UPDATE=no
AT_M4DIR=
CBUILD=i686-pc-linux-gnu
CDEFINE_default=__unix__
CFLAGS='-O2 -march=prescott -fomit-frame-pointer -pipe'
CFLAGS_default=
CHOST=i686-pc-linux-gnu
CHOST_default=i686-pc-linux-gnu
CLASSPATH=.
CROSSCOMPILE_OPTS=
CTARGET_default=i686-pc-linux-gnu
CVS_RSH=ssh
CXXFLAGS='-O2 -march=prescott -fomit-frame-pointer -pipe'
DEFAULT_ABI=default
DEPEND=$'x11-libs/libXmu\n\tx11-libs/libXxf86vm\n\tx11-libs/libXrandr\n\tx11-libs/libXxf86misc\n\tx11-libs/libXt\n\tx11-libs/libX11\n\tx11-libs/libXext\n\tx11-apps/xwininfo\n\tx11-apps/appres\n\tmedia-libs/netpbm\n\t>=dev-libs/libxml2-2.5\n\t>=x11-libs/gtk+-2\n\t>=gnome-base/libglade-1.99\n\tpam? ( virtual/pam )\n\tjpeg? ( media-libs/jpeg )\n\topengl? ( virtual/opengl )\n\txinerama? ( x11-libs/libXinerama )\n\tnew-login? ( gnome-base/gdm )\n\tx11-proto/xf86vidmodeproto\n\tx11-proto/xextproto\n\tx11-proto/scrnsaverproto\n\tx11-proto/recordproto\n\tx11-proto/xf86miscproto\n\tsys-devel/bc\n\tdev-util/pkgconfig\n\tsys-devel/gettext\n\tdev-util/intltool\n\txinerama? ( x11-proto/xineramaproto ) =sys-devel/automake-1.10*\n\t>=sys-devel/autoconf-2.61\n\tsys-devel/libtool'
DESCRIPTION='A modular screen saver and locker for the X Window System'
DESTTREE=/usr
DIROPTIONS=-m0755
EAPI=0
ELIBC=glibc
ELIBTOOL_VERSION=2.0.2
ELT_APPLIED_PATCHES=
ELT_LTMAIN_SH=
ELT_PATCH_DIR=/usr/portage/eclass/ELT-patches
EPATCH_EXCLUDE=
EPATCH_FORCE=no
EPATCH_MULTI_MSG='Applying various patches (bugfixes/updates) ...'
EPATCH_OPTS='-g0 -E --no-backup-if-mismatch'
EPATCH_SINGLE_MSG=
EPATCH_SOURCE=/var/tmp/portage/x11-misc/xscreensaver-5.07/work/patch
EPATCH_SUFFIX=patch.bz2
EXEOPTIONS=-m0755
FEATURES='distcc distlocks parallel-fetch preserve-libs protect-owned sandbox sfperms strict unmerge-orphans userfetch userpriv usersandbox'
FLTK_DOCDIR=/usr/share/doc/fltk-1.1.7-r3/html
GCC_SPECS=
GDK_USE_XFT=1
HOMEPAGE=http://www.jwz.org/xscreensaver
INHERITED='toolchain-funcs portability flag-o-matic multilib libtool autotools pam eutils'
INPUT_DEVICES='keyboard mouse evdev'
INSDESTTREE=
INSOPTIONS=-m0644
IUSE='jpeg new-login opengl pam suid xinerama '
KDEDIRS=/usr:/usr/local:/usr/kde/3.5
KERNEL=linux
KERNEL_ABI=default
KEYWORDS='~alpha ~amd64 ~arm ~hppa ~ia64 ~mips ~ppc ~ppc64 ~sh ~sparc ~x86 ~x86-fbsd'
KV=2.6.27-gentoo-r1
LCD_DEVICES='bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text'
LDFLAGS=-Wl,-O1
LDFLAGS_default=
LIBDIR_default=lib
LIBOPTIONS=-m0644
LICENSE=BSD
MAIL=/var/mail/minn
MAKEOPTS=-j3
MULTILIB_ABIS=default
OPENGL_PROFILE=xorg-x11
PDEPEND=' '
PKG_CONFIG_PATH=/usr/qt/3/lib/pkgconfig
PORTAGE_COMPRESS_EXCLUDE_SUFFIXES='css gif htm[l]? jp[e]?g js pdf png'
PORTAGE_NICENESS=3
PRELINK_PATH_MASK=/usr/lib/klibc
PROFILE_ONLY_VARIABLES='ARCH ELIBC KERNEL USERLAND'
PROPERTIES=
PROVIDE=
QMAKESPEC=linux-g++
QTDIR=/usr/qt/3
RDEPEND=$'x11-libs/libXmu\n\tx11-libs/libXxf86vm\n\tx11-libs/libXrandr\n\tx11-libs/libXxf86misc\n\tx11-libs/libXt\n\tx11-libs/libX11\n\tx11-libs/libXext\n\tx11-apps/xwininfo\n\tx11-apps/appres\n\tmedia-libs/netpbm\n\t>=dev-libs/libxml2-2.5\n\t>=x11-libs/gtk+-2\n\t>=gnome-base/libglade-1.99\n\tpam? ( virtual/pam )\n\tjpeg? ( media-libs/jpeg )\n\topengl? ( virtual/opengl )\n\txinerama? ( x11-libs/libXinerama )\n\tnew-login? ( gnome-base/gdm ) '
RESTRICT=
S=/var/tmp/portage/x11-misc/xscreensaver-5.07/work/xscreensaver-5.07
SANDBOX_DENY=/etc/ld.so.preload
SANDBOX_PREDICT=:/dev/console:/dev/random:/proc/self/maps:/usr/lib/python2.0/:/usr/lib/python2.1/:/usr/lib/python2.2/:/usr/lib/python2.3/:/usr/lib/python2.4/:/usr/lib/python2.5/:/usr/lib/python3.0/:/var/db/aliases.db:/var/db/ethers.db:/var/db/group.db:/var/db/hosts.db:/var/db/netgroup.db:/var/db/netmasks.db:/var/db/networks.db:/var/db/passwd.db:/var/db/protocols.db:/var/db/rpc.db:/var/db/services.db:/var/tmp/portage/x11-misc/xscreensaver-5.07/homedir/.:
SANDBOX_READ=:/:/dev/shm:/dev/stdin:/var/tmp:
SANDBOX_WRITE=:/dev/console:/dev/fd:/dev/null:/dev/pts/:/dev/pty:/dev/shm:/dev/shm/ngpt:/dev/stderr:/dev/stdout:/dev/tts:/dev/tty:/dev/vc/:/dev/zero:/proc/self/fd:/tmp:/tmp/:/usr/lib/cf:/usr/lib/conftest:/usr/lib32/cf:/usr/lib32/conftest:/usr/lib64/cf:/usr/lib64/conftest:/usr/tmp/cf:/usr/tmp/conftest:/var/log/scrollkeeper.log:/var/tmp:/var/tmp/:/var/tmp/portage/x11-misc/xscreensaver-5.07/homedir/.bash_history:/var/tmp/portage/x11-misc/xscreensaver-5.07/homedir/.gconfd/lock:
SANE_CONFIG_DIR=/etc/sane.d
SLOT=0
SRC_URI=http://www.jwz.org/xscreensaver/xscreensaver-5.07.tar.gz
SUDO_COMMAND=/bin/bash
SUDO_GID=1006
SUDO_UID=1000
SUDO_USER=minn
USE='elibc_glibc jpeg kernel_linux pam suid userland_GNU x86 xinerama'
USERLAND=GNU
USERNAME=root
VIDEO_CARDS=
WANT_AUTOCONF=2.5
WANT_AUTOMAKE=1.10
WINDOWID=46137351
XDG_DATA_DIRS=/usr/share:/usr/local/share:/usr/kde/3.5/share
_=PKG_INSTALL_MASK
_E_DOCDESTTREE_=
_E_EXEDESTTREE_=
___ECLASS_RECUR_MULTILIB=yes
___ECLASS_RECUR_TOOLCHAIN_FUNCS=yes
conf=xscreensaver-5.07-r0
repository=gentoo
ELT_find_ltmain_sh ()
{
local x=;
local dirlist=;
for x in $(find "${S}" -name 'ltmain.sh');
do
dirlist="${dirlist} ${x%/*}";
done;
echo "${dirlist}"
}
ELT_libtool_version ()
{
local ltmain_sh=$1;
local version=;
version=$(eval $(grep -e '^[[:space:]]*VERSION=' "${ltmain_sh}"); echo "${VERSION}");
[[ -z ${version} ]] && version="0";
echo "${version}"
}
ELT_try_and_apply_patch ()
{
local ret=0;
local file=$1;
local patch=$2;
if patch -p0 --dry-run "${file}" "${patch}" >&"${T}/elibtool.log"; then
einfo " Applying $(basename "$(dirname "${patch}")")-${patch##*/}.patch ...";
patch -p0 -g0 --no-backup-if-mismatch "${file}" "${patch}" >&"${T}/elibtool.log";
ret=$?;
export ELT_APPLIED_PATCHES="${ELT_APPLIED_PATCHES} ${patch##*/}";
else
ret=1;
fi;
return "${ret}"
}
ELT_walk_patches ()
{
local x=;
local y=;
local ret=1;
local file=$1;
local patch_set=$2;
local patch_dir=;
local rem_int_dep=$3;
if [[ -n ${patch_set} ]]; then
if [[ -d ${ELT_PATCH_DIR}/${patch_set} ]]; then
patch_dir="${ELT_PATCH_DIR}/${patch_set}";
else
return "${ret}";
fi;
for x in $(ls -d "${patch_dir}"/* 2> /dev/null | grep -v 'CVS' | sort -r);
do
if [[ -n ${x} && -f ${x} ]]; then
if [[ -n ${rem_int_dep} ]]; then
sed -e "s|@REM_INT_DEP@|${rem_int_dep}|g" ${x} > "${T}/$$.rem_int_deps.patch";
x="${T}/$$.rem_int_deps.patch";
fi;
if ELT_try_and_apply_patch "${file}" "${x}"; then
ret=0;
break;
fi;
fi;
done;
fi;
return "${ret}"
}
VER_major ()
{
[[ -z $1 ]] && return 1;
local VER=$@;
echo "${VER%%[^[:digit:]]*}"
}
VER_micro ()
{
[[ -z $1 ]] && return 1;
local VER=$@;
VER=${VER#*.*.};
echo "${VER%%[^[:digit:]]*}"
}
VER_minor ()
{
[[ -z $1 ]] && return 1;
local VER=$@;
VER=${VER#*.};
echo "${VER%%[^[:digit:]]*}"
}
VER_to_int ()
{
[[ -z $1 ]] && return 1;
local VER_MAJOR=$(VER_major "$1");
local VER_MINOR=$(VER_minor "$1");
local VER_MICRO=$(VER_micro "$1");
local VER_int=$(( VER_MAJOR * 65536 + VER_MINOR * 256 + VER_MICRO ));
if [[ ${VER_int} -ge 65536 ]]; then
echo "${VER_int}";
return 0;
fi;
echo 1;
return 1
}
_cdrom_locate_file_on_cd ()
{
local mline="";
local showedmsg=0 showjolietmsg=0;
while [[ -z ${CDROM_ROOT} ]]; do
local i=0;
local -a cdset=(${*//:/ });
if [[ -n ${CDROM_SET} ]]; then
cdset=(${cdset[${CDROM_SET}]});
fi;
while [[ -n ${cdset[${i}]} ]]; do
local dir=$(dirname ${cdset[${i}]});
local file=$(basename ${cdset[${i}]});
local point= node= fs= foo=;
while read point node fs foo; do
[[ " cd9660 iso9660 udf " != *" ${fs} "* ]] && ! [[ ${fs} == "subfs" && ",${opts}," == *",fs=cdfss,"* ]] && continue;
point=${point//\040/ };
[[ ! -d ${point}/${dir} ]] && continue;
[[ -z $(find "${point}/${dir}" -maxdepth 1 -iname "${file}") ]] && continue;
export CDROM_ROOT=${point};
export CDROM_SET=${i};
export CDROM_MATCH=${cdset[${i}]};
return;
done <<< "$(get_mounts)";
((++i));
done;
echo;
if [[ ${showedmsg} -eq 0 ]]; then
if [[ ${CDROM_TOTAL_CDS} -eq 1 ]]; then
if [[ -z ${CDROM_NAME} ]]; then
einfo "Please insert+mount the cdrom for ${PN} now !";
else
einfo "Please insert+mount the ${CDROM_NAME} cdrom now !";
fi;
else
if [[ -z ${CDROM_NAME_1} ]]; then
einfo "Please insert+mount cd #${CDROM_CURRENT_CD} for ${PN} now !";
else
local var="CDROM_NAME_${CDROM_CURRENT_CD}";
einfo "Please insert+mount the ${!var} cdrom now !";
fi;
fi;
showedmsg=1;
fi;
einfo "Press return to scan for the cd again";
einfo "or hit CTRL+C to abort the emerge.";
echo;
if [[ ${showjolietmsg} -eq 0 ]]; then
showjolietmsg=1;
else
ewarn "If you are having trouble with the detection";
ewarn "of your CD, it is possible that you do not have";
ewarn "Joliet support enabled in your kernel. Please";
ewarn "check that CONFIG_JOLIET is enabled in your kernel.";
ebeep 5;
fi;
read || die "something is screwed with your system";
done
}
_elibtoolize ()
{
local opts;
[[ -n $(autotools_check_macro AC_PROG_LIBTOOL AM_PROG_LIBTOOL LT_INIT) ]] || return 0;
[[ -f GNUmakefile.am || -f Makefile.am ]] && opts="--automake";
[[ "${USERLAND}" == "Darwin" ]] && LIBTOOLIZE="glibtoolize";
autotools_run_tool ${LIBTOOLIZE:-libtoolize} "$@" ${opts};
eaclocal
}
_epatch_assert ()
{
local _pipestatus=${PIPESTATUS[*]};
[[ ${_pipestatus// /} -eq 0 ]]
}
_epatch_draw_line ()
{
[[ -z $1 ]] && set "$(printf "%65s" '')";
echo "${1//?/=}"
}
_filter-hardened ()
{
local f;
for f in "$@";
do
case "${f}" in
-fPIC | -fpic | -fPIE | -fpie | -Wl,pie | -pie)
gcc-specs-pie || continue;
is-flagq -nopie || append-flags -nopie
;;
-fstack-protector)
gcc-specs-ssp || continue;
is-flagq -fno-stack-protector || append-flags -fno-stack-protector
;;
-fstack-protector-all)
gcc-specs-ssp-to-all || continue;
is-flagq -fno-stack-protector-all || append-flags -fno-stack-protector-all
;;
esac;
done
}
_filter-var ()
{
local f x VAR VAL;
declare -a new;
VAR=$1;
shift;
eval VAL=\${${VAR}};
for f in ${VAL};
do
for x in "$@";
do
[[ ${f} == ${x} ]] && continue 2;
done;
eval new\[\${\#new\[@]}]=\${f};
done;
eval export ${VAR}=\${new\[*]}
}
_gcc-install-dir ()
{
echo "$(LC_ALL=C $(tc-getCC) -print-search-dirs 2> /dev/null | awk '$1=="install:" {print $2}')"
}
_gcc-specs-directive_raw ()
{
local cc=$(tc-getCC);
local specfiles=$(LC_ALL=C ${cc} -v 2>&1 | awk '$1=="Reading" {print $NF}');
${cc} -dumpspecs 2> /dev/null | cat - ${specfiles} | awk -v directive=$1 'BEGIN { pspec=""; spec=""; outside=1 }
$1=="*"directive":" { pspec=spec; spec=""; outside=0; next }
outside || NF==0 || ( substr($1,1,1)=="*" && substr($1,length($1),1)==":" ) { outside=1; next }
spec=="" && substr($0,1,1)=="+" { spec=pspec " " substr($0,2); next }
{ spec=spec $0 }
END { print spec }';
return 0
}
_gcc-specs-exists ()
{
[[ -f $(_gcc-install-dir)/$1 ]]
}
_is_flagq ()
{
local x;
for x in ${!1};
do
[[ ${x} == $2 ]] && return 0;
done;
return 1
}
append-cppflags ()
{
[[ -z $* ]] && return 0;
export CPPFLAGS="${CPPFLAGS} $*";
return 0
}
append-fflags ()
{
[[ -z $* ]] && return 0;
export FFLAGS="${FFLAGS} $*";
export FCFLAGS="${FCFLAGS} $*";
return 0
}
append-flags ()
{
[[ -z $* ]] && return 0;
export CFLAGS="${CFLAGS} $*";
export CXXFLAGS="${CXXFLAGS} $*";
export FFLAGS="${FFLAGS} $*";
export FCFLAGS="${FCFLAGS} $*";
return 0
}
append-ldflags ()
{
[[ -z $* ]] && return 0;
local flag;
for flag in "$@";
do
[[ ${flag} == -l* ]] && ewarn "Appending a library link instruction (${flag}); libraries to link to should not be passed through LDFLAGS";
done;
export LDFLAGS="${LDFLAGS} $*";
return 0
}
append-lfs-flags ()
{
[[ -n $@ ]] && die "append-lfs-flags takes no arguments";
append-cppflags -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE
}
autotools_check_macro ()
{
[[ -f configure.ac || -f configure.in ]] || return 0;
local macro;
for macro in "$@";
do
WANT_AUTOCONF="2.5" autoconf --trace="${macro}" 2> /dev/null;
done;
return 0
}
autotools_get_auxdir ()
{
local auxdir_scan_out;
auxdir_scan_out=$(autotools_check_macro "AC_CONFIG_AUX_DIR");
[[ -n ${auxdir_scan_out} ]] || return 0;
echo ${auxdir_scan_out} | gawk '($0 !~ /^[[:space:]]*(#|dnl)/) {
if (match($0, /AC_CONFIG_AUX_DIR:(.*)$/, res))
print res[1]
}' | uniq;
return 0
}
autotools_get_subdirs ()
{
local subdirs_scan_out;
subdirs_scan_out=$(autotools_check_macro "AC_CONFIG_SUBDIRS");
[[ -n ${subdirs_scan_out} ]] || return 0;
echo "${subdirs_scan_out}" | gawk '($0 !~ /^[[:space:]]*(#|dnl)/) {
if (match($0, /AC_CONFIG_SUBDIRS:(.*)$/, res))
print res[1]
}' | uniq;
return 0
}
autotools_run_tool ()
{
if [[ ${EBUILD_PHASE} != "unpack" && ${EBUILD_PHASE} != "prepare" ]]; then
ewarn "QA Warning: running $1 in ${EBUILD_PHASE} phase";
fi;
local STDERR_TARGET="${T}/$$.out";
local ris;
printf "***** $1 *****\n***** $*\n\n" > "${STDERR_TARGET%/*}/$1-${STDERR_TARGET##*/}";
ebegin "Running $@";
"$@" >> "${STDERR_TARGET%/*}/$1-${STDERR_TARGET##*/}" 2>&1;
ris=$?;
eend ${ris};
if [[ ${ris} != 0 && ${NO_FAIL} != 1 ]]; then
echo;
eerror "Failed Running $1 !";
eerror;
eerror "Include in your bugreport the contents of:";
eerror;
eerror " ${STDERR_TARGET%/*}/$1-${STDERR_TARGET##*/}";
echo;
die "Failed Running $1 !";
fi
}
bindnow-flags ()
{
ewarn "QA: stop using the bindnow-flags function ... simply drop it from your ebuild" 1>&2;
case $($(tc-getLD) -v 2>&1 </dev/null) in
*GNU* | *'with BFD'*)
echo "-Wl,-z,now"
;;
*Apple*)
echo "-bind_at_load"
;;
*)
case $($(tc-getLD) -V 2>&1 </dev/null) in
*Solaris*)
echo "-Wl,-z,now"
;;
esac
;;
esac
}
built_with_use ()
{
local hidden="no";
if [[ $1 == "--hidden" ]]; then
hidden="yes";
shift;
fi;
local missing_action="die";
if [[ $1 == "--missing" ]]; then
missing_action=$2;
shift;
shift;
case ${missing_action} in
true | false | die)
;;
*)
die "unknown action '${missing_action}'"
;;
esac;
fi;
local opt=$1;
[[ ${opt:0:1} = "-" ]] && shift || opt="-a";
local PKG=$(best_version $1);
[[ -z ${PKG} ]] && die "Unable to resolve $1 to an installed package";
shift;
local USEFILE=${ROOT}/var/db/pkg/${PKG}/USE;
local IUSEFILE=${ROOT}/var/db/pkg/${PKG}/IUSE;
if [[ ! -e ${USEFILE} ]] || [[ ! -e ${IUSEFILE} && ${hidden} == "no" ]]; then
case ${missing_action} in
true)
return 0
;;
false)
return 1
;;
die)
die "Unable to determine what USE flags $PKG was built with"
;;
esac;
fi;
if [[ ${hidden} == "no" ]]; then
local IUSE_BUILT=($(<"${IUSEFILE}"));
local expand;
for expand in $(echo ${USE_EXPAND} | tr '[:upper:]' '[:lower:]');
do
if [[ $1 == ${expand}_* ]]; then
expand="";
break;
fi;
done;
if [[ -n ${expand} ]]; then
if ! has $1 ${IUSE_BUILT[@]#[-+]}; then
case ${missing_action} in
true)
return 0
;;
false)
return 1
;;
die)
die "$PKG does not actually support the $1 USE flag!"
;;
esac;
fi;
fi;
fi;
local USE_BUILT=$(<${USEFILE});
while [[ $# -gt 0 ]]; do
if [[ ${opt} = "-o" ]]; then
has $1 ${USE_BUILT} && return 0;
else
has $1 ${USE_BUILT} || return 1;
fi;
shift;
done;
[[ ${opt} = "-a" ]]
}
cdrom_get_cds ()
{
local cdcnt=0;
local f=;
for f in "$@";
do
((++cdcnt));
export CDROM_CHECK_${cdcnt}="$f";
done;
export CDROM_TOTAL_CDS=${cdcnt};
export CDROM_CURRENT_CD=1;
if [[ -n ${CD_ROOT}${CD_ROOT_1} ]]; then
local var=;
cdcnt=0;
while [[ ${cdcnt} -lt ${CDROM_TOTAL_CDS} ]]; do
((++cdcnt));
var="CD_ROOT_${cdcnt}";
[[ -z ${!var} ]] && var="CD_ROOT";
if [[ -z ${!var} ]]; then
eerror "You must either use just the CD_ROOT";
eerror "or specify ALL the CD_ROOT_X variables.";
eerror "In this case, you will need ${CDROM_TOTAL_CDS} CD_ROOT_X variables.";
die "could not locate CD_ROOT_${cdcnt}";
fi;
done;
export CDROM_ROOT=${CD_ROOT_1:-${CD_ROOT}};
einfo "Found CD #${CDROM_CURRENT_CD} root at ${CDROM_ROOT}";
export CDROM_SET=-1;
for f in ${CDROM_CHECK_1//:/ };
do
((++CDROM_SET));
[[ -e ${CD_ROOT}/${f} ]] && break;
done;
export CDROM_MATCH=${f};
return;
fi;
if [[ ${CDROM_TOTAL_CDS} -eq 1 ]]; then
einfo "This ebuild will need the ${CDROM_NAME:-cdrom for ${PN}}";
echo;
einfo "If you do not have the CD, but have the data files";
einfo "mounted somewhere on your filesystem, just export";
einfo "the variable CD_ROOT so that it points to the";
einfo "directory containing the files.";
echo;
einfo "For example:";
einfo "export CD_ROOT=/mnt/cdrom";
echo;
else
if [[ -n ${CDROM_NAME_SET} ]]; then
cdcnt=0;
while [[ ${cdcnt} -lt ${CDROM_TOTAL_CDS} ]]; do
((++cdcnt));
export CDROM_NAME_${cdcnt}="${CDROM_NAME_SET[$((${cdcnt}-1))]}";
done;
fi;
einfo "This package will need access to ${CDROM_TOTAL_CDS} cds.";
cdcnt=0;
while [[ ${cdcnt} -lt ${CDROM_TOTAL_CDS} ]]; do
((++cdcnt));
var="CDROM_NAME_${cdcnt}";
[[ ! -z ${!var} ]] && einfo " CD ${cdcnt}: ${!var}";
done;
echo;
einfo "If you do not have the CDs, but have the data files";
einfo "mounted somewhere on your filesystem, just export";
einfo "the following variables so they point to the right place:";
einfon "";
cdcnt=0;
while [[ ${cdcnt} -lt ${CDROM_TOTAL_CDS} ]]; do
((++cdcnt));
echo -n " CD_ROOT_${cdcnt}";
done;
echo;
einfo "Or, if you have all the files in the same place, or";
einfo "you only have one cdrom, you can export CD_ROOT";
einfo "and that place will be used as the same data source";
einfo "for all the CDs.";
echo;
einfo "For example:";
einfo "export CD_ROOT_1=/mnt/cdrom";
echo;
fi;
export CDROM_SET="";
export CDROM_CURRENT_CD=0;
cdrom_load_next_cd
}
cdrom_load_next_cd ()
{
local var;
((++CDROM_CURRENT_CD));
unset CDROM_ROOT;
var=CD_ROOT_${CDROM_CURRENT_CD};
[[ -z ${!var} ]] && var="CD_ROOT";
if [[ -z ${!var} ]]; then
var="CDROM_CHECK_${CDROM_CURRENT_CD}";
_cdrom_locate_file_on_cd ${!var};
else
export CDROM_ROOT=${!var};
fi;
einfo "Found CD #${CDROM_CURRENT_CD} root at ${CDROM_ROOT}"
}
check_license ()
{
local lic=$1;
if [ -z "${lic}" ]; then
lic="${PORTDIR}/licenses/${LICENSE}";
else
if [ -e "${PORTDIR}/licenses/${lic}" ]; then
lic="${PORTDIR}/licenses/${lic}";
else
if [ -e "${PWD}/${lic}" ]; then
lic="${PWD}/${lic}";
else
if [ -e "${lic}" ]; then
lic="${lic}";
fi;
fi;
fi;
fi;
[ ! -f "${lic}" ] && die "Could not find requested license ${lic}";
local l="`basename ${lic}`";
local shopts=$-;
local alic;
set -o noglob;
for alic in ${ACCEPT_LICENSE};
do
if [[ ${alic} == ${l} ]]; then
set +o noglob;
set -${shopts};
return 0;
fi;
done;
set +o noglob;
set -$shopts;
local licmsg=$(emktemp);
cat > ${licmsg} <<-EOF
**********************************************************
The following license outlines the terms of use of this
package. You MUST accept this license for installation to
continue. When you are done viewing, hit 'q'. If you
CTRL+C out of this, the install will not run!
**********************************************************
EOF
cat ${lic} >> ${licmsg};
${PAGER:-less} ${licmsg} || die "Could not execute pager (${PAGER}) to accept ${lic}";
einfon "Do you accept the terms of this license (${l})? [yes/no] ";
read alic;
case ${alic} in
yes | Yes | y | Y)
return 0
;;
*)
echo;
echo;
echo;
eerror "You MUST accept the license to continue! Exiting!";
die "Failed to accept license"
;;
esac
}
cleanpamd ()
{
while [[ -n $1 ]]; do
if ! has_version sys-libs/pam; then
sed -i -e '/pam_shells\|pam_console/s:^:#:' "${D}/etc/pam.d/$1";
fi;
shift;
done
}
create_ml_includes ()
{
local dest=$1;
shift;
local basedirs=$(create_ml_includes-listdirs "$@");
create_ml_includes-makedestdirs ${dest} ${basedirs};
local file;
for file in $(create_ml_includes-allfiles ${basedirs});
do
( echo "/* Autogenerated by create_ml_includes() in multilib.eclass */";
local dir;
for dir in ${basedirs};
do
if [[ -f ${D}/${dir}/${file} ]]; then
echo "";
local sym=$(create_ml_includes-sym_for_dir ${dir} "$@");
if [[ ${sym/=} != "${sym}" ]]; then
echo "#if ${sym}";
else
if [[ ${sym::1} == "!" ]]; then
echo "#ifndef ${sym:1}";
else
echo "#ifdef ${sym}";
fi;
fi;
echo "# include <$(create_ml_includes-absolute ${dir}/${file})>";
echo "#endif /* ${sym} */";
fi;
done ) > "${D}/${dest}/${file}";
done
}
create_ml_includes-absolute ()
{
local dst="$(create_ml_includes-tidy_path $1)";
dst=(${dst//\// });
local i;
for ((i=0; i<${#dst[*]}; i++))
do
[ "${dst[i]}" == "include" ] && break;
done;
local strip_upto=$i;
for ((i=strip_upto+1; i<${#dst[*]}-1; i++))
do
echo -n ${dst[i]}/;
done;
echo -n ${dst[i]}
}
create_ml_includes-allfiles ()
{
local basedir file;
for basedir in "$@";
do
for file in $(find "${D}"/${basedir} -type f);
do
echo ${file/${D}\/${basedir}\//};
done;
done | sort | uniq
}
create_ml_includes-listdirs ()
{
local dirs;
local data;
for data in "$@";
do
dirs="${dirs} ${data/*:/}";
done;
echo ${dirs:1}
}
create_ml_includes-makedestdirs ()
{
local dest=$1;
shift;
local basedirs=$@;
dodir ${dest};
local basedir;
for basedir in ${basedirs};
do
local dir;
for dir in $(find ${D}/${basedir} -type d);
do
dodir ${dest}/${dir/${D}\/${basedir}/};
done;
done
}
create_ml_includes-sym_for_dir ()
{
local dir=$1;
shift;
local data;
for data in "$@";
do
if [[ ${data} == *:${dir} ]]; then
echo ${data/:*/};
return 0;
fi;
done;
echo "Shouldn't be here -- create_ml_includes-sym_for_dir $1 $@";
exit 1
}
create_ml_includes-tidy_path ()
{
local removed=$1;
if [ -n "${removed}" ]; then
while [ "${removed}" != "${removed/\/\//\/}" ]; do
removed=${removed/\/\//\/};
done;
while [ "${removed}" != "${removed//\/.\//\/}" ]; do
removed=${removed//\/.\//\/};
done;
[ "${removed##*/}" = "." ] && removed=${removed%/*};
while [ "${removed}" != "${removed//\/..\/}" ]; do
local p1="${removed%%\/..\/*}";
local p2="${removed#*\/..\/}";
removed="${p1%\/*}/${p2}";
done;
[ "${removed##*/}" = ".." ] && removed=${removed%/*/*};
[ "${removed##*/}" = "" ] && removed=${removed%/*};
echo ${removed};
fi
}
darwintoolize ()
{
ewarn "darwintoolize() is deprecated, please just use elibtoolize()!";
elibtoolize
}
dlopen_lib ()
{
if [[ ${ELIBC} != *BSD ]]; then
echo "-ldl";
fi
}
doicon ()
{
( local i j ret;
insinto /usr/share/pixmaps;
for i in "$@";
do
if [[ -f ${i} ]]; then
doins "${i}";
((ret+=$?));
else
if [[ -d ${i} ]]; then
for j in "${i}"/*.png;
do
doins "${j}";
((ret+=$?));
done;
else
((++ret));
fi;
fi;
done;
exit ${ret} )
}
domenu ()
{
( local i j ret=0;
insinto /usr/share/applications;
for i in "$@";
do
if [[ -f ${i} ]]; then
doins "${i}";
((ret+=$?));
else
if [[ -d ${i} ]]; then
for j in "${i}"/*.desktop;
do
doins "${j}";
((ret+=$?));
done;
else
((++ret));
fi;
fi;
done;
exit ${ret} )
}
dopamd ()
{
[[ -z $1 ]] && die "dopamd requires at least one argument";
if hasq pam ${IUSE} && ! use pam; then
return 0;
fi;
( insinto /etc/pam.d;
insopts -m 0644;
doins "$@" ) || die "failed to install $@";
cleanpamd "$@"
}
dopammod ()
{
[[ -z $1 ]] && die "dopammod requires at least one argument";
if hasq pam ${IUSE} && ! use pam; then
return 0;
fi;
exeinto $(getpam_mod_dir);
doexe "$@" || die "failed to install $@"
}
dopamsecurity ()
{
[[ $# -lt 2 ]] && die "dopamsecurity requires at least two arguments";
if hasq pam ${IUSE} && ! use pam; then
return 0;
fi;
( insinto /etc/security/$1;
insopts -m 0644;
doins "${@:2}" ) || die "failed to install ${@:2}"
}
eaclocal ()
{
local aclocal_opts;
local amflags_file;
for amflags_file in GNUmakefile.am Makefile.am GNUmakefile.in Makefile.in;
do
[[ -e ${amflags_file} ]] || continue;
aclocal_opts=$(sed -n '/^ACLOCAL_AMFLAGS[[:space:]]*=/s:[^=]*=::p' ${amflags_file});
eval aclocal_opts=\"${aclocal_opts}\";
break;
done;
if [[ -n ${AT_M4DIR} ]]; then
for x in ${AT_M4DIR};
do
case "${x}" in
"-I")
;;
*)
[[ ! -d ${x} ]] && ewarn "eaclocal: '${x}' does not exist";
aclocal_opts="${aclocal_opts} -I ${x}"
;;
esac;
done;
fi;
[[ ! -f aclocal.m4 || -n $(grep -e 'generated.*by aclocal' aclocal.m4) ]] && autotools_run_tool aclocal "$@" ${aclocal_opts}
}
eautoconf ()
{
if [[ ! -f configure.ac && ! -f configure.in ]]; then
echo;
eerror "No configure.{ac,in} present in '$(pwd | sed -e 's:.*/::')'!";
echo;
die "No configure.{ac,in} present!";
fi;
autotools_run_tool autoconf "$@"
}
eautoheader ()
{
[[ -n $(autotools_check_macro "AC_CONFIG_HEADERS") ]] || return 0;
NO_FAIL=1 autotools_run_tool autoheader "$@"
}
eautomake ()
{
local extra_opts;
local makefile_name;
if [[ -f GNUmakefile.am ]]; then
makefile_name="GNUmakefile";
else
if [[ -f Makefile.am ]]; then
makefile_name="Makefile";
else
return 0;
fi;
fi;
if [[ -z ${FROM_EAUTORECONF} && -f ${makefile_name}.in ]]; then
local used_automake;
local installed_automake;
installed_automake=$(automake --version | head -n 1 | sed -e 's:.*(GNU automake) ::');
used_automake=$(head -n 1 < ${makefile_name}.in | sed -e 's:.*by automake \(.*\) from .*:\1:');
if [[ ${installed_automake} != ${used_automake} ]]; then
einfo "Automake used for the package (${used_automake}) differs from";
einfo "the installed version (${installed_automake}).";
eautoreconf;
return 0;
fi;
fi;
[[ -f INSTALL && -f AUTHORS && -f ChangeLog && -f NEWS ]] || extra_opts="${extra_opts} --foreign";
autotools_run_tool automake --add-missing --copy ${extra_opts} "$@"
}
eautoreconf ()
{
local pwd=$(pwd) x auxdir;
if [[ -z ${AT_NO_RECURSIVE} ]]; then
for x in $(autotools_get_subdirs);
do
if [[ -d ${x} ]]; then
cd "${x}";
AT_NOELIBTOOLIZE="yes" eautoreconf;
cd "${pwd}";
fi;
done;
fi;
auxdir=$(autotools_get_auxdir);
einfo "Running eautoreconf in '$(pwd)' ...";
[[ -n ${auxdir} ]] && mkdir -p ${auxdir};
eaclocal;
if ${LIBTOOLIZE:-libtoolize} -n --install >&/dev/null; then
_elibtoolize --copy --force --install;
else
_elibtoolize --copy --force;
fi;
eautoconf;
eautoheader;
FROM_EAUTORECONF="yes" eautomake ${AM_OPTS};
[[ ${AT_NOELIBTOOLIZE} == "yes" ]] && return 0;
elibtoolize;
return 0
}
ebeep ()
{
local n;
if [[ -z ${EBEEP_IGNORE} ]]; then
for ((n=1 ; n <= ${1:-5} ; n++))
do
echo -ne "\a";
sleep 0.1 >&/dev/null;
sleep 0,1 >&/dev/null;
echo -ne "\a";
sleep 1;
done;
fi
}
ecvs_clean ()
{
[[ -z $* ]] && set -- .;
find "$@" -type d -name 'CVS' -prune -print0 | xargs -0 rm -rf;
find "$@" -type f -name '.cvs*' -print0 | xargs -0 rm -rf
}
edos2unix ()
{
echo "$@" | xargs sed -i 's/\r$//'
}
egetent ()
{
case ${CHOST} in
*-darwin*)
case "$2" in
*[!0-9]*)
nidump $1 . | awk -F":" "{ if (\$1 ~ /^$2$/) {print \$0;exit;} }"
;;
*)
nidump $1 . | awk -F":" "{ if (\$3 == $2) {print \$0;exit;} }"
;;
esac
;;
*-freebsd* | *-dragonfly*)
local opts action="user";
[[ $1 == "passwd" ]] || action="group";
if [[ $2 == [[:digit:]]* ]]; then
[[ ${action} == "user" ]] && opts="-u" || opts="-g";
fi;
pw show ${action} ${opts} "$2" -q
;;
*-netbsd* | *-openbsd*)
grep "$2:\*:" /etc/$1
;;
*)
type -p nscd >&/dev/null && nscd -i "$1";
getent "$1" "$2"
;;
esac
}
egethome ()
{
ent=$(egetent passwd $1);
case ${CHOST} in
*-darwin* | *-freebsd* | *-dragonfly*)
echo ${ent} | cut -d: -f9
;;
*)
echo ${ent} | cut -d: -f6
;;
esac
}
egetshell ()
{
ent=$(egetent passwd "$1");
case ${CHOST} in
*-darwin* | *-freebsd* | *-dragonfly*)
echo ${ent} | cut -d: -f10
;;
*)
echo ${ent} cut -d: -f7
;;
esac
}
elibtoolize ()
{
local x=;
local y=;
local do_portage="no";
local do_reversedeps="no";
local do_only_patches="no";
local do_uclibc="yes";
local deptoremove=;
local my_dirlist=;
local elt_patches="install-sh ltmain portage relink max_cmd_len sed test tmp";
local start_dir=${PWD};
my_dirlist=$(ELT_find_ltmain_sh);
for x in "$@";
do
case "${x}" in
"--portage")
do_portage="yes"
;;
"--reverse-deps")
do_reversedeps="yes";
elt_patches="${elt_patches} fix-relink"
;;
"--patch-only")
do_only_patches="yes"
;;
"^--remove-internal-dep="*)
deptoremove=$(echo "${x}" | sed -e 's|--remove-internal-dep=||');
[[ -n ${deptoremove} ]] && elt_patches="${elt_patches} rem-int-dep"
;;
"--shallow")
if [[ -f ${S}/ltmain.sh ]]; then
my_dirlist=${S};
else
my_dirlist=;
fi
;;
"--no-uclibc")
do_uclibc="no"
;;
*)
eerror "Invalid elibtoolize option: ${x}";
die "elibtoolize called with ${x} ??"
;;
esac;
done;
[[ ${do_uclibc} == "yes" ]] && elt_patches="${elt_patches} uclibc-conf uclibc-ltconf";
[[ ${CHOST} == *"-freebsd"* ]] && elt_patches="${elt_patches} fbsd-conf fbsd-ltconf";
[[ ${CHOST} == *"-darwin"* ]] && elt_patches="${elt_patches} darwin-ltconf darwin-ltmain";
for x in ${my_dirlist};
do
local tmp=$(echo "${x}" | sed -e "s|${WORKDIR}||");
export ELT_APPLIED_PATCHES=;
export ELT_LTMAIN_SH="${x}/ltmain.sh";
[[ -f ${x}/.elibtoolized ]] && continue;
cd ${x};
einfo "Running elibtoolize in: $(echo "/${tmp}" | sed -e 's|//|/|g; s|^/||')";
for y in ${elt_patches};
do
local ret=0;
case "${y}" in
"portage")
if [[ -z $(grep 'We do not want portage' "${x}/ltmain.sh") ]]; then
ELT_walk_patches "${x}/ltmain.sh" "${y}";
ret=$?;
fi
;;
"rem-int-dep")
ELT_walk_patches "${x}/ltmain.sh" "${y}" "${deptoremove}";
ret=$?
;;
"fix-relink")
if [[ -n $(grep 'inst_prefix_dir' "${x}/ltmain.sh") ]]; then
ELT_walk_patches "${x}/ltmain.sh" "${y}";
ret=$?;
fi
;;
"max_cmd_len")
if [[ -n $(grep 'max_cmd_len' "${x}/ltmain.sh") ]]; then
ELT_walk_patches "${x}/ltmain.sh" "${y}";
ret=$?;
fi
;;
"uclibc-conf")
if [[ -e ${x}/configure && -n $(grep 'Transform linux' "${x}/configure") ]]; then
ELT_walk_patches "${x}/configure" "${y}";
ret=$?;
else
if [[ ! -e ${x}/configure && -e ${x}/../configure && -n $(grep 'Transform linux' "${x}/../configure") ]]; then
ELT_walk_patches "${x}/../configure" "${y}";
ret=$?;
fi;
fi
;;
"uclibc-ltconf")
if [[ -s ${x}/ltconfig ]]; then
ELT_walk_patches "${x}/ltconfig" "${y}";
ret=$?;
fi
;;
"fbsd-conf")
if [[ -e ${x}/configure && -n $(grep 'version_type=freebsd-' "${x}/configure") ]]; then
ELT_walk_patches "${x}/configure" "${y}";
ret=$?;
else
if [[ ! -e ${x}/configure && -e ${x}/../configure && -n $(grep 'version_type=freebsd-' "${x}/../configure") ]]; then
ELT_walk_patches "${x}/../configure" "${y}";
ret=$?;
fi;
fi
;;
"fbsd-ltconf")
if [[ -s ${x}/ltconfig ]]; then
ELT_walk_patches "${x}/ltconfig" "${y}";
ret=$?;
fi
;;
"darwin-ltconf")
if [[ -s ${x}/ltconfig ]]; then
ELT_walk_patches "${x}/ltconfig" "${y}";
ret=$?;
fi
;;
"install-sh")
ELT_walk_patches "${x}/install-sh" "${y}";
ret=$?
;;
*)
ELT_walk_patches "${x}/ltmain.sh" "${y}";
ret=$?
;;
esac;
if [[ ${ret} -ne 0 ]]; then
case ${y} in
"relink")
local version=$(ELT_libtool_version "${x}/ltmain.sh");
if [[ -z $(grep 'inst_prefix_dir' "${x}/ltmain.sh") && $(VER_to_int "${version}") -ge $(VER_to_int "1.4.0") ]]; then
ewarn " Could not apply relink.patch!";
fi
;;
"portage")
if [[ ${do_portage} == "yes" ]]; then
if [[ -z $(grep 'We do not want portage' "${x}/ltmain.sh") ]]; then
echo;
eerror "Portage patch requested, but failed to apply!";
eerror "Please bug azarah or vapier to add proper patch.";
die "Portage patch requested, but failed to apply!";
fi;
else
if [[ -n $(grep 'We do not want portage' "${x}/ltmain.sh") ]]; then
:;
else
local version=$( eval $(grep -e '^[[:space:]]*VERSION=' "${x}/ltmain.sh"); echo "${VERSION}");
echo;
eerror "Portage patch failed to apply (ltmain.sh version ${version})!";
eerror "Please bug azarah or vapier to add proper patch.";
die "Portage patch failed to apply!";
fi;
ELT_APPLIED_PATCHES="portage";
fi
;;
"uclibc-"*)
[[ ${CHOST} == *"-uclibc" ]] && ewarn " uClibc patch set '${y}' failed to apply!"
;;
"fbsd-"*)
if [[ ${CHOST} == *"-freebsd"* ]]; then
if [[ -z $(grep 'Handle Gentoo/FreeBSD as it was Linux' "${x}/configure" "${x}/../configure" 2>/dev/null) ]]; then
eerror " FreeBSD patch set '${y}' failed to apply!";
die "FreeBSD patch set '${y}' failed to apply!";
fi;
fi
;;
"darwin-"*)
[[ ${CHOST} == *"-darwin"* ]] && ewarn " Darwin patch set '${y}' failed to apply!"
;;
esac;
fi;
done;
if [[ -z ${ELT_APPLIED_PATCHES} ]]; then
if [[ ${do_portage} == "no" && ${do_reversedeps} == "no" && ${do_only_patches} == "no" && ${deptoremove} == "" ]]; then
ewarn "Cannot apply any patches, please file a bug about this";
die;
fi;
fi;
[[ -f ${x}/libtool ]] && rm -f "${x}/libtool";
>> "${x}/.elibtoolized";
done;
cd "${start_dir}"
}
emktemp ()
{
local exe="touch";
[[ $1 == -d ]] && exe="mkdir" && shift;
local topdir=$1;
if [[ -z ${topdir} ]]; then
[[ -z ${T} ]] && topdir="/tmp" || topdir=${T};
fi;
if ! type -P mktemp > /dev/null; then
local tmp=/;
while [[ -e ${tmp} ]]; do
tmp=${topdir}/tmp.${RANDOM}.${RANDOM}.${RANDOM};
done;
${exe} "${tmp}" || ${exe} -p "${tmp}";
echo "${tmp}";
else
if [[ ${exe} == "touch" ]]; then
TMPDIR="${topdir}" mktemp -t tmp.XXXXXXXXXX;
else
TMPDIR="${topdir}" mktemp -dt tmp.XXXXXXXXXX;
fi;
fi
}
enewgroup ()
{
case ${EBUILD_PHASE} in
unpack | compile | test | install)
eerror "'enewgroup()' called from '${EBUILD_PHASE}()' which is not a pkg_* function.";
eerror "Package fails at QA and at life. Please file a bug.";
die "Bad package! enewgroup is only for use in pkg_* functions!"
;;
esac;
local egroup="$1";
shift;
if [ -z "${egroup}" ]; then
eerror "No group specified !";
die "Cannot call enewgroup without a group";
fi;
if [[ -n $(egetent group "${egroup}") ]]; then
return 0;
fi;
einfo "Adding group '${egroup}' to your system ...";
local opts=;
local egid="$1";
shift;
if [ ! -z "${egid}" ]; then
if [ "${egid}" -gt 0 ]; then
if [ -z "`egetent group ${egid}`" ]; then
if [[ "${CHOST}" == *-darwin* ]]; then
opts="${opts} ${egid}";
else
opts="${opts} -g ${egid}";
fi;
else
egid="next available; requested gid taken";
fi;
else
eerror "Groupid given but is not greater than 0 !";
die "${egid} is not a valid GID";
fi;
else
egid="next available";
fi;
einfo " - Groupid: ${egid}";
local eextra="$@";
opts="${opts} ${eextra}";
local oldsandbox="${SANDBOX_ON}";
export SANDBOX_ON="0";
case ${CHOST} in
*-darwin*)
if [ ! -z "${eextra}" ]; then
einfo "Extra options are not supported on Darwin/OS X yet";
einfo "Please report the ebuild along with the info below";
einfo "eextra: ${eextra}";
die "Required function missing";
fi;
case ${egid} in
*[!0-9]*)
for ((egid = 101; egid <= 999; egid++))
do
[[ -z $(egetent group ${egid}) ]] && break;
done
;;
esac;
dscl . create /groups/${egroup} gid ${egid};
dscl . create /groups/${egroup} passwd '*'
;;
*-freebsd* | *-dragonfly*)
case ${egid} in
*[!0-9]*)
for ((egid = 101; egid <= 999; egid++))
do
[[ -z $(egetent group ${egid}) ]] && break;
done
;;
esac;
pw groupadd ${egroup} -g ${egid} || die "enewgroup failed"
;;
*-netbsd*)
case ${egid} in
*[!0-9]*)
for ((egid = 101; egid <= 999; egid++))
do
[[ -z $(egetent group ${egid}) ]] && break;
done
;;
esac;
groupadd -g ${egid} ${egroup} || die "enewgroup failed"
;;
*)
groupadd ${opts} ${egroup} || die "enewgroup failed"
;;
esac;
export SANDBOX_ON="${oldsandbox}"
}
enewuser ()
{
case ${EBUILD_PHASE} in
unpack | compile | test | install)
eerror "'enewuser()' called from '${EBUILD_PHASE}()' which is not a pkg_* function.";
eerror "Package fails at QA and at life. Please file a bug.";
die "Bad package! enewuser is only for use in pkg_* functions!"
;;
esac;
local euser=$1;
shift;
if [[ -z ${euser} ]]; then
eerror "No username specified !";
die "Cannot call enewuser without a username";
fi;
if [[ -n $(egetent passwd "${euser}") ]]; then
return 0;
fi;
einfo "Adding user '${euser}' to your system ...";
local opts=;
local euid=$1;
shift;
if [[ -n ${euid} && ${euid} != -1 ]]; then
if [[ ${euid} -gt 0 ]]; then
if [[ -n $(egetent passwd ${euid}) ]]; then
euid="next";
fi;
else
eerror "Userid given but is not greater than 0 !";
die "${euid} is not a valid UID";
fi;
else
euid="next";
fi;
if [[ ${euid} == "next" ]]; then
for ((euid = 101; euid <= 999; euid++))
do
[[ -z $(egetent passwd ${euid}) ]] && break;
done;
fi;
opts="${opts} -u ${euid}";
einfo " - Userid: ${euid}";
local eshell=$1;
shift;
if [[ ! -z ${eshell} ]] && [[ ${eshell} != "-1" ]]; then
if [[ ! -e ${ROOT}${eshell} ]]; then
eerror "A shell was specified but it does not exist !";
die "${eshell} does not exist in ${ROOT}";
fi;
if [[ ${eshell} == */false || ${eshell} == */nologin ]]; then
eerror "Do not specify ${eshell} yourself, use -1";
die "Pass '-1' as the shell parameter";
fi;
else
for shell in /sbin/nologin /usr/sbin/nologin /bin/false /usr/bin/false /dev/null;
do
[[ -x ${ROOT}${shell} ]] && break;
done;
if [[ ${shell} == "/dev/null" ]]; then
eerror "Unable to identify the shell to use, proceeding with userland default.";
case ${USERLAND} in
GNU)
shell="/bin/false"
;;
BSD)
shell="/sbin/nologin"
;;
Darwin)
shell="/usr/sbin/nologin"
;;
*)
die "Unable to identify the default shell for userland ${USERLAND}"
;;
esac;
fi;
eshell=${shell};
fi;
einfo " - Shell: ${eshell}";
opts="${opts} -s ${eshell}";
local ehome=$1;
shift;
if [[ -z ${ehome} ]] || [[ ${ehome} == "-1" ]]; then
ehome="/dev/null";
fi;
einfo " - Home: ${ehome}";
opts="${opts} -d ${ehome}";
local egroups=$1;
shift;
if [[ ! -z ${egroups} ]]; then
local oldifs=${IFS};
local defgroup="" exgroups="";
export IFS=",";
for g in ${egroups};
do
export IFS=${oldifs};
if [[ -z $(egetent group "${g}") ]]; then
eerror "You must add group ${g} to the system first";
die "${g} is not a valid GID";
fi;
if [[ -z ${defgroup} ]]; then
defgroup=${g};
else
exgroups="${exgroups},${g}";
fi;
export IFS=",";
done;
export IFS=${oldifs};
opts="${opts} -g ${defgroup}";
if [[ ! -z ${exgroups} ]]; then
opts="${opts} -G ${exgroups:1}";
fi;
else
egroups="(none)";
fi;
einfo " - Groups: ${egroups}";
local oldsandbox=${SANDBOX_ON};
export SANDBOX_ON="0";
case ${CHOST} in
*-darwin*)
if [[ -z $@ ]]; then
dscl . create /users/${euser} uid ${euid};
dscl . create /users/${euser} shell ${eshell};
dscl . create /users/${euser} home ${ehome};
dscl . create /users/${euser} realname "added by portage for ${PN}";
local oldifs=${IFS};
export IFS=",";
for g in ${egroups};
do
dscl . merge /groups/${g} users ${euser};
done;
export IFS=${oldifs};
else
einfo "Extra options are not supported on Darwin yet";
einfo "Please report the ebuild along with the info below";
einfo "eextra: $@";
die "Required function missing";
fi
;;
*-freebsd* | *-dragonfly*)
if [[ -z $@ ]]; then
pw useradd ${euser} ${opts} -c "added by portage for ${PN}" die "enewuser failed";
else
einfo " - Extra: $@";
pw useradd ${euser} ${opts} "$@" || die "enewuser failed";
fi
;;
*-netbsd*)
if [[ -z $@ ]]; then
useradd ${opts} ${euser} || die "enewuser failed";
else
einfo " - Extra: $@";
useradd ${opts} ${euser} "$@" || die "enewuser failed";
fi
;;
*-openbsd*)
if [[ -z $@ ]]; then
useradd -u ${euid} -s ${eshell} -d ${ehome} -c "Added by portage for ${PN}" -g ${egroups} ${euser} || die "enewuser failed";
else
einfo " - Extra: $@";
useradd -u ${euid} -s ${eshell} -d ${ehome} -c "Added by portage for ${PN}" -g ${egroups} ${euser} "$@" || die "enewuser failed";
fi
;;
*)
if [[ -z $@ ]]; then
useradd ${opts} ${euser} -c "added by portage for ${PN}" || die "enewuser failed";
else
einfo " - Extra: $@";
useradd ${opts} ${euser} "$@" || die "enewuser failed";
fi
;;
esac;
if [[ ! -e ${ROOT}/${ehome} ]]; then
einfo " - Creating ${ehome} in ${ROOT}";
mkdir -p "${ROOT}/${ehome}";
chown ${euser} "${ROOT}/${ehome}";
chmod 755 "${ROOT}/${ehome}";
fi;
export SANDBOX_ON=${oldsandbox}
}
epatch ()
{
function _epatch_draw_line ()
{
[[ -z $1 ]] && set "$(printf "%65s" '')";
echo "${1//?/=}"
};
function _epatch_assert ()
{
local _pipestatus=${PIPESTATUS[*]};
[[ ${_pipestatus// /} -eq 0 ]]
};
local PIPE_CMD="";
local STDERR_TARGET="${T}/$$.out";
local PATCH_TARGET="${T}/$$.patch";
local PATCH_SUFFIX="";
local SINGLE_PATCH="no";
local x="";
unset P4CONFIG P4PORT P4USER;
if [ "$#" -gt 1 ]; then
local m="";
for m in "$@";
do
epatch "${m}";
done;
return 0;
fi;
if [ -n "$1" -a -f "$1" ]; then
SINGLE_PATCH="yes";
local EPATCH_SOURCE="$1";
local EPATCH_SUFFIX="${1##*\.}";
else
if [ -n "$1" -a -d "$1" ]; then
if [ "${EPATCH_FORCE}" = "yes" ] && [ -z "${EPATCH_SUFFIX}" ]; then
local EPATCH_SOURCE="$1/*";
else
local EPATCH_SOURCE="$1/*.${EPATCH_SUFFIX}";
fi;
else
if [[ ! -d ${EPATCH_SOURCE} ]] || [[ -n $1 ]]; then
if [ -n "$1" -a "${EPATCH_SOURCE}" = "${WORKDIR}/patch" ]; then
EPATCH_SOURCE="$1";
fi;
echo;
eerror "Cannot find \$EPATCH_SOURCE! Value for \$EPATCH_SOURCE is:";
eerror;
eerror " ${EPATCH_SOURCE}";
eerror " ( ${EPATCH_SOURCE##*/} )";
echo;
die "Cannot find \$EPATCH_SOURCE!";
fi;
local EPATCH_SOURCE="${EPATCH_SOURCE}/*.${EPATCH_SUFFIX}";
fi;
fi;
case ${EPATCH_SUFFIX##*\.} in
lzma)
PIPE_CMD="lzma -dc";
PATCH_SUFFIX="lzma"
;;
bz2)
PIPE_CMD="bzip2 -dc";
PATCH_SUFFIX="bz2"
;;
gz | Z | z)
PIPE_CMD="gzip -dc";
PATCH_SUFFIX="gz"
;;
ZIP | zip)
PIPE_CMD="unzip -p";
PATCH_SUFFIX="zip"
;;
*)
PIPE_CMD="cat";
PATCH_SUFFIX="patch"
;;
esac;
if [ "${SINGLE_PATCH}" = "no" ]; then
einfo "${EPATCH_MULTI_MSG}";
fi;
for x in ${EPATCH_SOURCE};
do
if [ -f ${x} ] && ( [ "${SINGLE_PATCH}" = "yes" -o "${x/_all_}" != "${x}" -o "${x/_${ARCH}_}" != "${x}" ] || [ "${EPATCH_FORCE}" = "yes" ] ); then
local count=0;
local popts="${EPATCH_OPTS}";
local patchname=${x##*/};
if [ -n "${EPATCH_EXCLUDE}" ]; then
if [ "${EPATCH_EXCLUDE/${patchname}}" != "${EPATCH_EXCLUDE}" ]; then
continue;
fi;
fi;
if [ "${SINGLE_PATCH}" = "yes" ]; then
if [ -n "${EPATCH_SINGLE_MSG}" ]; then
einfo "${EPATCH_SINGLE_MSG}";
else
einfo "Applying ${patchname} ...";
fi;
else
einfo " ${patchname} ...";
fi;
echo "***** ${patchname} *****" > ${STDERR_TARGET%/*}/${patchname}-${STDERR_TARGET##*/};
echo >> ${STDERR_TARGET%/*}/${patchname}-${STDERR_TARGET##*/};
if [[ ${PATCH_SUFFIX} != "patch" ]]; then
echo -n "PIPE_COMMAND: " >> ${STDERR_TARGET%/*}/${patchname}-${STDERR_TARGET##*/};
echo "${PIPE_CMD} ${x} > ${PATCH_TARGET}" >> ${STDERR_TARGET%/*}/${patchname}-${STDERR_TARGET##*/};
if ! ( ${PIPE_CMD} ${x} > ${PATCH_TARGET} ) >> ${STDERR_TARGET%/*}/${patchname}-${STDERR_TARGET##*/} 2>&1; then
echo;
eerror "Could not extract patch!";
count=5;
break;
fi;
else
PATCH_TARGET="${x}";
fi;
local abs_paths=$(egrep -n '^[-+]{3} /' "${PATCH_TARGET}" | awk '$2 != "/dev/null" { print }');
if [[ -n ${abs_paths} ]]; then
count=1;
echo "NOTE: skipping -p0 due to absolute paths in patch:" >> ${STDERR_TARGET%/*}/${patchname}-${STDERR_TARGET##*/};
echo "${abs_paths}" >> ${STDERR_TARGET%/*}/${patchname}-${STDERR_TARGET##*/};
fi;
while [ "${count}" -lt 5 ]; do
_epatch_draw_line "***** ${patchname} *****" >> ${STDERR_TARGET%/*}/${patchname}-${STDERR_TARGET##*/};
echo >> ${STDERR_TARGET%/*}/${patchname}-${STDERR_TARGET##*/};
echo -n "PATCH COMMAND: " >> ${STDERR_TARGET%/*}/${patchname}-${STDERR_TARGET##*/};
echo "patch -p${count} ${popts} < ${PATCH_TARGET}" >> ${STDERR_TARGET%/*}/${patchname}-${STDERR_TARGET##*/};
echo >> ${STDERR_TARGET%/*}/${patchname}-${STDERR_TARGET##*/};
_epatch_draw_line "***** ${patchname} *****" >> ${STDERR_TARGET%/*}/${patchname}-${STDERR_TARGET##*/};
if ( cat ${PATCH_TARGET} | patch -p${count} ${popts} --dry-run -f;
_epatch_assert ) >> ${STDERR_TARGET%/*}/${patchname}-${STDERR_TARGET##*/} 2>&1; then
_epatch_draw_line "***** ${patchname} *****" > ${STDERR_TARGET%/*}/${patchname}-${STDERR_TARGET##*/}.real;
echo >> ${STDERR_TARGET%/*}/${patchname}-${STDERR_TARGET##*/}.real;
echo "ACTUALLY APPLYING ${patchname} ..." >> ${STDERR_TARGET%/*}/${patchname}-${STDERR_TARGET##*/}.real;
echo >> ${STDERR_TARGET%/*}/${patchname}-${STDERR_TARGET##*/}.real;
_epatch_draw_line "***** ${patchname} *****" >> ${STDERR_TARGET%/*}/${patchname}-${STDERR_TARGET##*/}.real;
cat ${PATCH_TARGET} | patch -p${count} ${popts} >> ${STDERR_TARGET%/*}/${patchname}-${STDERR_TARGET##*/}.real 2>&1;
_epatch_assert;
if [ "$?" -ne 0 ]; then
cat ${STDERR_TARGET%/*}/${patchname}-${STDERR_TARGET##*/}.real >> ${STDERR_TARGET%/*}/${patchname}-${STDERR_TARGET##*/};
echo;
eerror "A dry-run of patch command succeeded, but actually";
eerror "applying the patch failed!";
count=5;
fi;
rm -f ${STDERR_TARGET%/*}/${patchname}-${STDERR_TARGET##*/}.real;
break;
fi;
count=$((count + 1));
done;
if [ "${PATCH_SUFFIX}" != "patch" ]; then
rm -f ${PATCH_TARGET};
fi;
if [ "${count}" -eq 5 ]; then
echo;
eerror "Failed Patch: ${patchname} !";
eerror " ( ${PATCH_TARGET} )";
eerror;
eerror "Include in your bugreport the contents of:";
eerror;
eerror " ${STDERR_TARGET%/*}/${patchname}-${STDERR_TARGET##*/}";
echo;
die "Failed Patch: ${patchname}!";
fi;
rm -f ${STDERR_TARGET%/*}/${patchname}-${STDERR_TARGET##*/};
eend 0;
fi;
done;
if [ "${SINGLE_PATCH}" = "no" ]; then
einfo "Done with patching";
fi
}
epause ()
{
[[ -z ${EPAUSE_IGNORE} ]] && sleep ${1:-5}
}
epunt_cxx ()
{
local dir=$1;
[[ -z ${dir} ]] && dir=${S};
ebegin "Removing useless C++ checks";
local f;
find "${dir}" -name configure | while read f; do
patch --no-backup-if-mismatch -p0 "${f}" "${PORTDIR}/eclass/ELT-patches/nocxx/nocxx.patch" > /dev/null;
done;
eend 0
}
esvn_clean ()
{
[[ -z $* ]] && set -- .;
find "$@" -type d -name '.svn' -prune -print0 | xargs -0 rm -rf
}
filter-flags ()
{
_filter-hardened "$@";
_filter-var CFLAGS "$@";
_filter-var CPPFLAGS "$@";
_filter-var CXXFLAGS "$@";
_filter-var FFLAGS "$@";
_filter-var FCFLAGS "$@";
return 0
}
filter-ldflags ()
{
_filter-var LDFLAGS "$@";
return 0
}
filter-lfs-flags ()
{
[[ -n $@ ]] && die "filter-lfs-flags takes no arguments";
filter-flags -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE
}
filter-mfpmath ()
{
local orig_mfpmath new_math prune_math;
orig_mfpmath=$(get-flag -mfpmath);
new_math=$(get-flag mfpmath);
new_math=" ${new_math//,/ } ";
prune_math="";
for prune_math in "$@";
do
new_math=${new_math/ ${prune_math} / };
done;
new_math=$(echo ${new_math});
new_math=${new_math// /,};
if [[ -z ${new_math} ]]; then
filter-flags ${orig_mfpmath};
else
replace-flags ${orig_mfpmath} -mfpmath=${new_math};
fi;
return 0
}
find_unpackable_file ()
{
local src=$1;
if [[ -z ${src} ]]; then
src=${DISTDIR}/${A};
else
if [[ -e ${DISTDIR}/${src} ]]; then
src=${DISTDIR}/${src};
else
if [[ -e ${PWD}/${src} ]]; then
src=${PWD}/${src};
else
if [[ -e ${src} ]]; then
src=${src};
fi;
fi;
fi;
fi;
[[ ! -e ${src} ]] && return 1;
echo "${src}"
}
gcc-fullversion ()
{
$(tc-getCC "$@") -dumpversion
}
gcc-major-version ()
{
gcc-version "$@" | cut -f1 -d.
}
gcc-micro-version ()
{
gcc-fullversion "$@" | cut -f3 -d. | cut -f1 -d-
}
gcc-minor-version ()
{
gcc-version "$@" | cut -f2 -d.
}
gcc-specs-directive ()
{
local directive subdname subdirective;
directive="$(_gcc-specs-directive_raw $1)";
while [[ ${directive} == *%\(*\)* ]]; do
subdname=${directive/*%\(};
subdname=${subdname/\)*};
subdirective="$(_gcc-specs-directive_raw ${subdname})";
directive="${directive//\%(${subdname})/${subdirective}}";
done;
echo "${directive}";
return 0
}
gcc-specs-now ()
{
local directive;
directive=$(gcc-specs-directive link_command);
return $([[ ${directive/\{!nonow:} != ${directive} ]])
}
gcc-specs-pie ()
{
local directive;
directive=$(gcc-specs-directive cc1);
return $([[ ${directive/\{!nopie:} != ${directive} ]])
}
gcc-specs-relro ()
{
local directive;
directive=$(gcc-specs-directive link_command);
return $([[ ${directive/\{!norelro:} != ${directive} ]])
}
gcc-specs-ssp ()
{
local directive;
directive=$(gcc-specs-directive cc1);
return $([[ ${directive/\{!fno-stack-protector:} != ${directive} ]])
}
gcc-specs-ssp-to-all ()
{
local directive;
directive=$(gcc-specs-directive cc1);
return $([[ ${directive/\{!fno-stack-protector-all:} != ${directive} ]])
}
gcc-version ()
{
gcc-fullversion "$@" | cut -f1,2 -d.
}
gen_usr_ldscript ()
{
local lib libdir=$(get_libdir) output_format="";
dodir /usr/${libdir};
output_format=$($(tc-getCC) ${CFLAGS} ${LDFLAGS} -Wl,--verbose 2>&1 | sed -n 's/^OUTPUT_FORMAT("\([^"]*\)",.*/\1/p');
[[ -n ${output_format} ]] && output_format="OUTPUT_FORMAT ( ${output_format} )";
for lib in "$@";
do
if [[ ${USERLAND} == "Darwin" ]]; then
ewarn "Not creating fake dynamic library for $lib on Darwin;";
ewarn "making a symlink instead.";
dosym "/${libdir}/${lib}" "/usr/${libdir}/${lib}";
else
cat > "${D}/usr/${libdir}/${lib}" <<-END_LDSCRIPT
/* GNU ld script
Since Gentoo has critical dynamic libraries
in /lib, and the static versions in /usr/lib,
we need to have a "fake" dynamic lib in /usr/lib,
otherwise we run into linking problems.
See bug http://bugs.gentoo.org/4411 for more info.
*/
${output_format}
GROUP ( /${libdir}/${lib} )
END_LDSCRIPT
fi
fperms a+x "/usr/${libdir}/${lib}" || die "could not change perms on ${lib}";
done
}
get-flag ()
{
local f findflag="$1";
for f in ${CFLAGS} ${CXXFLAGS} ${FFLAGS} ${FCFLAGS};
do
if [ "${f/${findflag}}" != "${f}" ]; then
printf "%s\n" "${f/-${findflag}=}";
return 0;
fi;
done;
return 1
}
get_abi_ASFLAGS ()
{
get_abi_var ASFLAGS "$@"
}
get_abi_CDEFINE ()
{
get_abi_var CDEFINE "$@"
}
get_abi_CFLAGS ()
{
get_abi_var CFLAGS "$@"
}
get_abi_CHOST ()
{
get_abi_var CHOST "$@"
}
get_abi_CTARGET ()
{
get_abi_var CTARGET "$@"
}
get_abi_FAKE_TARGETS ()
{
get_abi_var FAKE_TARGETS "$@"
}
get_abi_LDFLAGS ()
{
get_abi_var LDFLAGS "$@"
}
get_abi_LIBDIR ()
{
get_abi_var LIBDIR "$@"
}
get_abi_var ()
{
local flag=$1;
local abi;
if [ $# -gt 1 ]; then
abi=${2};
else
if [ -n "${ABI}" ]; then
abi=${ABI};
else
if [ -n "${DEFAULT_ABI}" ]; then
abi=${DEFAULT_ABI};
else
abi="default";
fi;
fi;
fi;
local var="${flag}_${abi}";
echo ${!var}
}
get_all_abis ()
{
local order="";
if [[ -z ${MULTILIB_ABIS} ]]; then
echo "default";
return 0;
fi;
for x in ${MULTILIB_ABIS};
do
if [[ ${x} != ${DEFAULT_ABI} ]]; then
order="${order:+${order} }${x}";
fi;
done;
order="${order:+${order} }${DEFAULT_ABI}";
echo ${order};
return 0
}
get_all_libdirs ()
{
local libdirs="lib";
local abi;
local dir;
for abi in ${MULTILIB_ABIS};
do
[ "$(get_abi_LIBDIR ${abi})" != "lib" ] && libdirs="${libdirs} $(get_abi_LIBDIR ${abi})";
done;
echo "${libdirs}"
}
get_bmake ()
{
if [[ ${USERLAND} == *BSD ]]; then
echo make;
else
if [[ ${USERLAND} == "Darwin" ]]; then
echo bsdmake;
else
echo pmake;
fi;
fi
}
get_install_abis ()
{
local order="";
if [[ -z ${MULTILIB_ABIS} ]]; then
echo "default";
return 0;
fi;
if [[ ${EMULTILIB_PKG} == "true" ]]; then
for x in ${MULTILIB_ABIS};
do
if [[ ${x} != "${DEFAULT_ABI}" ]]; then
hasq ${x} ${ABI_DENY} || ordera="${ordera} ${x}";
fi;
done;
hasq ${DEFAULT_ABI} ${ABI_DENY} || order="${ordera} ${DEFAULT_ABI}";
if [[ -n ${ABI_ALLOW} ]]; then
local ordera="";
for x in ${order};
do
if hasq ${x} ${ABI_ALLOW}; then
ordera="${ordera} ${x}";
fi;
done;
order=${ordera};
fi;
else
order=${DEFAULT_ABI};
fi;
if [[ -z ${order} ]]; then
die "The ABI list is empty. Are you using a proper multilib profile? Perhaps your USE flags or MULTILIB_ABIS are too restrictive for this package.";
fi;
echo ${order};
return 0
}
get_libdir ()
{
local CONF_LIBDIR;
if [ -n "${CONF_LIBDIR_OVERRIDE}" ]; then
echo ${CONF_LIBDIR_OVERRIDE};
else
get_abi_LIBDIR;
fi
}
get_libdir_override ()
{
if has_multilib_profile; then
eerror "get_libdir_override called, but it shouldn't be needed with the new multilib approach. Please file a bug at http://bugs.gentoo.org and assign it to eradicator@gentoo.org";
exit 1;
fi;
CONF_LIBDIR="$1";
CONF_LIBDIR_OVERRIDE="$1";
LIBDIR_default="$1"
}
get_libname ()
{
local libname;
local ver=$1;
case ${CHOST} in
mingw* | *-mingw*)
libname="dll"
;;
*-darwin*)
libname="dylib"
;;
*)
libname="so"
;;
esac;
if [[ -z $* ]]; then
echo ".${libname}";
else
for ver in "$@";
do
case ${CHOST} in
*-darwin*)
echo ".${ver}.${libname}"
;;
*)
echo ".${libname}.${ver}"
;;
esac;
done;
fi
}
get_ml_incdir ()
{
local dir=/usr/include;
if [[ $# -gt 0 ]]; then
incdir=$1;
shift;
fi;
if [[ -z "${MULTILIB_ABIS}" ]]; then
echo ${incdir};
return 0;
fi;
local abi=${ABI-${DEFAULT_ABI}};
if [[ $# -gt 0 ]]; then
abi=$1;
shift;
fi;
if [[ -d "${dir}/gentoo-multilib/${abi}" ]]; then
echo ${dir}/gentoo-multilib/${abi};
else
echo ${dir};
fi
}
get_mounts ()
{
local point= node= fs= opts= foo=;
if [[ $(uname -s) == "Linux" ]]; then
while read node point fs opts foo; do
echo "${point} ${node} ${fs} ${opts}";
done < /proc/mounts;
return;
fi;
local IFS=' ';
LC_ALL=C mount -p | while read node point fs foo; do
opts=${fs#* };
fs=${fs%% *};
echo "${point// /\040} ${node// /\040} ${fs%% *} ${opts// /\040}";
done
}
get_multilibdir ()
{
if has_multilib_profile; then
eerror "get_multilibdir called, but it shouldn't be needed with the new multilib approach. Please file a bug at http://bugs.gentoo.org and assign it to eradicator@gentoo.org";
exit 1;
fi;
echo ${CONF_MULTILIBDIR:=lib32}
}
getpam_mod_dir ()
{
if has_version sys-libs/pam || has_version sys-libs/openpam; then
PAM_MOD_DIR=/$(get_libdir)/security;
else
PAM_MOD_DIR=/$(get_libdir)/security;
fi;
echo ${PAM_MOD_DIR}
}
has_hardened ()
{
ewarn "has_hardened: deprecated, please use gcc-specs-{relro,now}()!" 1>&2;
test_version_info Hardened && return 0;
[[ -f ${GCC_SPECS} && ${GCC_SPECS} != ${GCC_SPECS/hardened/} ]]
}
has_m32 ()
{
[ "$(tc-arch)" = "amd64" ] && has_multilib_profile && return 0;
local temp=$(emktemp);
echo "int main() { return(0); }" > "${temp}".c;
MY_CC=$(tc-getCC);
${MY_CC/ .*/} -m32 -o "$(emktemp)" "${temp}".c > /dev/null 2>&1;
local ret=$?;
rm -f "${temp}".c;
[[ ${ret} != 1 ]] && return 0;
return 1
}
has_m64 ()
{
local temp="$(emktemp)";
echo "int main() { return(0); }" > "${temp}".c;
MY_CC=$(tc-getCC);
${MY_CC/ .*/} -m64 -o "$(emktemp)" "${temp}".c > /dev/null 2>&1;
local ret=$?;
rm -f "${temp}".c;
[[ ${ret} != 1 ]] && return 0;
return 1
}
has_multilib_profile ()
{
[ -n "${MULTILIB_ABIS}" -a "${MULTILIB_ABIS}" != "${MULTILIB_ABIS/ /}" ]
}
has_pic ()
{
ewarn "has_pic: deprecated, please use gcc-specs-pie()!" 1>&2;
[[ ${CFLAGS/-fPIC} != ${CFLAGS} || ${CFLAGS/-fpic} != ${CFLAGS} ]] || gcc-specs-pie
}
has_pie ()
{
ewarn "has_pie: deprecated, please use gcc-specs-pie()!" 1>&2;
[[ ${CFLAGS/-fPIE} != ${CFLAGS} || ${CFLAGS/-fpie} != ${CFLAGS} ]] || gcc-specs-pie
}
has_ssp ()
{
ewarn "has_ssp: deprecated, please use gcc-specs-ssp()!" 1>&2;
[[ ${CFLAGS/-fstack-protector} != ${CFLAGS} || -n $(echo | $(tc-getCC) ${CFLAGS} -E -dM - | grep __SSP__) ]] || gcc-specs-ssp
}
has_ssp_all ()
{
ewarn "has_ssp_all: deprecated, please use gcc-specs-ssp()!" 1>&2;
[[ ${CFLAGS/-fstack-protector-all} != ${CFLAGS} || -n $(echo | $(tc-getCC) ${CFLAGS} -E -dM - | grep __SSP_ALL__) ]] || gcc-specs-ssp-all
}
is-flag ()
{
is-flagq "$@" && echo true
}
is-flagq ()
{
[[ -n $2 ]] && die "Usage: is-flag <flag>";
_is_flagq CFLAGS $1 || _is_flagq CXXFLAGS $1 || _is_flagq FFLAGS $1 || _is_flagq FCFLAGS $1
}
is-ldflag ()
{
is-ldflagq "$@" && echo true
}
is-ldflagq ()
{
[[ -n $2 ]] && die "Usage: is-ldflag <flag>";
_is_flagq LDFLAGS $1
}
is-login-disabled ()
{
shell=$(egetshell "$1");
case ${shell} in
/bin/false | /usr/bin/false | /sbin/nologin | /usr/sbin/nologin)
return 0
;;
*)
return 1
;;
esac
}
is_final_abi ()
{
has_multilib_profile || return 0;
local ALL_ABIS=$(get_install_abis);
local LAST_ABI=${ALL_ABIS/* /};
[[ ${LAST_ABI} == ${ABI} ]]
}
make_desktop_entry ()
{
[[ -z $1 ]] && eerror "make_desktop_entry: You must specify the executable" && return 1;
local exec=${1};
local name=${2:-${PN}};
local icon=${3:-${PN}};
local type=${4};
local path=${5};
if [[ -z ${type} ]]; then
local catmaj=${CATEGORY%%-*};
local catmin=${CATEGORY##*-};
case ${catmaj} in
app)
case ${catmin} in
accessibility)
type=Accessibility
;;
admin)
type=System
;;
antivirus)
type=System
;;
arch)
type=Archiving
;;
backup)
type=Archiving
;;
cdr)
type=DiscBurning
;;
dicts)
type=Dictionary
;;
doc)
type=Documentation
;;
editors)
type=TextEditor
;;
emacs)
type=TextEditor
;;
emulation)
type=Emulator
;;
laptop)
type=HardwareSettings
;;
office)
type=Office
;;
pda)
type=PDA
;;
vim)
type=TextEditor
;;
xemacs)
type=TextEditor
;;
*)
type=
;;
esac
;;
dev)
type="Development"
;;
games)
case ${catmin} in
action | fps)
type=ActionGame
;;
arcade)
type=ArcadeGame
;;
board)
type=BoardGame
;;
emulation)
type=Emulator
;;
kids)
type=KidsGame
;;
puzzle)
type=LogicGame
;;
roguelike)
type=RolePlaying
;;
rpg)
type=RolePlaying
;;
simulation)
type=Simulation
;;
sports)
type=SportsGame
;;
strategy)
type=StrategyGame
;;
*)
type=
;;
esac;
type="Game;${type}"
;;
gnome)
type="Gnome;GTK"
;;
kde)
type="KDE;Qt"
;;
mail)
type="Network;Email"
;;
media)
case ${catmin} in
gfx)
type=Graphics
;;
radio)
type=Tuner
;;
sound)
type=Audio
;;
tv)
type=TV
;;
video)
type=Video
;;
*)
type=
;;
esac;
type="AudioVideo;${type}"
;;
net)
case ${catmin} in
dialup)
type=Dialup
;;
ftp)
type=FileTransfer
;;
im)
type=InstantMessaging
;;
irc)
type=IRCClient
;;
mail)
type=Email
;;
news)
type=News
;;
nntp)
type=News
;;
p2p)
type=FileTransfer
;;
*)
type=
;;
esac;
type="Network;${type}"
;;
sci)
case ${catmin} in
astro*)
type=Astronomy
;;
bio*)
type=Biology
;;
calc*)
type=Calculator
;;
chem*)
type=Chemistry
;;
elec*)
type=Electronics
;;
geo*)
type=Geology
;;
math*)
type=Math
;;
physics)
type=Physics
;;
visual*)
type=DataVisualization
;;
*)
type=
;;
esac;
type="Science;${type}"
;;
sys)
type="System"
;;
www)
case ${catmin} in
client)
type=WebBrowser
;;
*)
type=
;;
esac;
type="Network"
;;
*)
type=
;;
esac;
fi;
if [ "${SLOT}" == "0" ]; then
local desktop_name="${PN}";
else
local desktop_name="${PN}-${SLOT}";
fi;
local desktop="${T}/$(echo ${exec} | sed 's:[[:space:]/:]:_:g')-${desktop_name}.desktop";
cat > "${desktop}" <<-EOF
[Desktop Entry]
Version=1.0
Name=${name}
Type=Application
Comment=${DESCRIPTION}
Exec=${exec}
TryExec=${exec%% *}
Icon=${icon}
Categories=${type};
EOF
[[ -n ${path} ]] && echo "Path=${path}" >> "${desktop}";
( insinto /usr/share/applications;
doins "${desktop}" )
}
make_session_desktop ()
{
[[ -z $1 ]] && eerror "make_session_desktop: You must specify the title" && return 1;
[[ -z $2 ]] && eerror "make_session_desktop: You must specify the command" && return 1;
local title=$1;
local command=$2;
local desktop=${T}/${wm}.desktop;
cat > "${desktop}" <<-EOF
[Desktop Entry]
Name=${title}
Comment=This session logs you into ${title}
Exec=${command}
TryExec=${command}
Type=Application
EOF
( insinto /usr/share/xsessions;
doins "${desktop}" )
}
make_wrapper ()
{
local wrapper=$1 bin=$2 chdir=$3 libdir=$4 path=$5;
local tmpwrapper=$(emktemp);
cat > "${tmpwrapper}" <<EOF
#!/bin/sh
cd "${chdir:-.}"
if [ -n "${libdir}" ] ; then
if [ "\${LD_LIBRARY_PATH+set}" = "set" ] ; then
export LD_LIBRARY_PATH="\${LD_LIBRARY_PATH}:${libdir}"
else
export LD_LIBRARY_PATH="${libdir}"
fi
fi
exec ${bin} "\$@"
EOF
chmod go+rx "${tmpwrapper}";
if [[ -n ${path} ]]; then
( exeinto "${path}";
newexe "${tmpwrapper}" "${wrapper}" ) || die;
else
newbin "${tmpwrapper}" "${wrapper}" || die;
fi
}
multilib_env ()
{
local CTARGET=${1:-${CTARGET}};
case ${CTARGET} in
x86_64*)
export CFLAGS_x86=${CFLAGS_x86--m32};
export CHOST_x86=${CTARGET/x86_64/i686};
export CTARGET_x86=${CHOST_x86};
export CDEFINE_x86="__i386__";
export LIBDIR_x86="lib";
export CFLAGS_amd64=${CFLAGS_amd64--m64};
export CHOST_amd64=${CTARGET};
export CTARGET_amd64=${CHOST_amd64};
export CDEFINE_amd64="__x86_64__";
export LIBDIR_amd64="lib64";
export MULTILIB_ABIS="amd64 x86";
export DEFAULT_ABI="amd64"
;;
mips64*)
export CFLAGS_o32=${CFLAGS_o32--mabi=32};
export CHOST_o32=${CTARGET/mips64/mips};
export CTARGET_o32=${CHOST_o32};
export CDEFINE_o32="_MIPS_SIM == _ABIO32";
export LIBDIR_o32="lib";
export CFLAGS_n32=${CFLAGS_n32--mabi=n32};
export CHOST_n32=${CTARGET};
export CTARGET_n32=${CHOST_n32};
export CDEFINE_n32="_MIPS_SIM == _ABIN32";
export LIBDIR_n32="lib32";
export CFLAGS_n64=${CFLAGS_n64--mabi=64};
export CHOST_n64=${CTARGET};
export CTARGET_n64=${CHOST_n64};
export CDEFINE_n64="_MIPS_SIM == _ABI64";
export LIBDIR_n64="lib64";
export MULTILIB_ABIS="n64 n32 o32";
export DEFAULT_ABI="n32"
;;
powerpc64*)
export CFLAGS_ppc=${CFLAGS_ppc--m32};
export CHOST_ppc=${CTARGET/powerpc64/powerpc};
export CTARGET_ppc=${CHOST_ppc};
export CDEFINE_ppc="!__powerpc64__";
export LIBDIR_ppc="lib";
export CFLAGS_ppc64=${CFLAGS_ppc64--m64};
export CHOST_ppc64=${CTARGET};
export CTARGET_ppc64=${CHOST_ppc64};
export CDEFINE_ppc64="__powerpc64__";
export LIBDIR_ppc64="lib64";
export MULTILIB_ABIS="ppc64 ppc";
export DEFAULT_ABI="ppc64"
;;
s390x*)
export CFLAGS_s390=${CFLAGS_s390--m31};
export CHOST_s390=${CTARGET/s390x/s390};
export CTARGET_s390=${CHOST_s390};
export CDEFINE_s390="!__s390x__";
export LIBDIR_s390="lib";
export CFLAGS_s390x=${CFLAGS_s390x--m64};
export CHOST_s390x=${CTARGET};
export CTARGET_s390x=${CHOST_s390x};
export CDEFINE_s390x="__s390x__";
export LIBDIR_s390x="lib64";
export MULTILIB_ABIS="s390x s390";
export DEFAULT_ABI="s390x"
;;
sparc*)
export CFLAGS_sparc32=${CFLAGS_sparc32};
export CHOST_sparc32=${CTARGET/sparc64/sparc};
export CTARGET_sparc32=${CHOST_sparc32};
export CDEFINE_sparc32="!__arch64__";
export LIBDIR_sparc32="lib";
export CFLAGS_sparc64=${CFLAGS_sparc64--m64};
export CHOST_sparc64=${CTARGET};
export CTARGET_sparc64=${CHOST_sparc64};
export CDEFINE_sparc64="__arch64__";
export LIBDIR_sparc64="lib64";
export MULTILIB_ABIS="${MULTILIB_ABIS-sparc64 sparc32}";
export DEFAULT_ABI="${DEFAULT_ABI-sparc64}"
;;
*)
export MULTILIB_ABIS="default";
export DEFAULT_ABI="default"
;;
esac
}
multilib_toolchain_setup ()
{
export ABI=$1;
if has_version app-admin/eselect-compiler; then
export LD="ld $(get_abi_LDFLAGS $1)";
export AS="as $(get_abi_ASFLAGS $1)";
export CHOST=$(get_abi_CHOST $1);
export CBUILD=$(get_abi_CHOST $1);
else
tc-export CC;
fi
}
newicon ()
{
( insinto /usr/share/pixmaps;
newins "$@" )
}
newmenu ()
{
( insinto /usr/share/applications;
newins "$@" )
}
newpamd ()
{
[[ $# -ne 2 ]] && die "newpamd requires two arguments";
if hasq pam ${IUSE} && ! use pam; then
return 0;
fi;
( insinto /etc/pam.d;
insopts -m 0644;
newins "$1" "$2" ) || die "failed to install $1 as $2";
cleanpamd $2
}
newpammod ()
{
[[ $# -ne 2 ]] && die "newpammod requires two arguements";
if hasq pam ${IUSE} && ! use pam; then
return 0;
fi;
exeinto $(getpam_mod_dir);
newexe "$1" "$2" || die "failed to install $1 as $2"
}
newpamsecurity ()
{
[[ $# -ne 3 ]] && die "newpamsecurity requires three arguments";
if hasq pam ${IUSE} && ! use pam; then
return 0;
fi;
( insinto /etc/security/$1;
insopts -m 0644;
newins "$2" "$3" ) || die "failed to install $2 as $3"
}
number_abis ()
{
get_install_abis | wc -w
}
pam_epam_expand ()
{
sed -n -e 's|#%EPAM-\([[:alpha:]-]\+\):\([-+<>=/.![:alnum:]]\+\)%#.*|\1 \2|p' "$@" | sort -u | while read condition parameter; do
disable="yes";
case "$condition" in
If-Has)
message="This can be used only if you have ${parameter} installed";
has_version "$parameter" && disable="no"
;;
Use-Flag)
message="This can be used only if you enabled the ${parameter} USE flag";
use "$parameter" && disable="no"
;;
*)
eerror "Unknown EPAM condition '${condition}' ('${parameter}')";
die "Unknown EPAM condition '${condition}' ('${parameter}')"
;;
esac;
if [ "${disable}" = "yes" ]; then
sed -i -e "/#%EPAM-${condition}:${parameter/\//\\/}%#/d" "$@";
else
sed -i -e "s|#%EPAM-${condition}:${parameter}%#||" "$@";
fi;
done
}
pamd_mimic ()
{
[[ $# -lt 3 ]] && die "pamd_mimic requires at least three argments";
if hasq pam ${IUSE} && ! use pam; then
return 0;
fi;
dodir /etc/pam.d;
pamdfile=${D}/etc/pam.d/$2;
echo -e "# File autogenerated by pamd_mimic in pam eclass\n\n" >> $pamdfile;
originalstack=$1;
authlevels="auth account password session";
if has_version '<sys-libs/pam-0.78'; then
mimic="\trequired\t\tpam_stack.so service=${originalstack}";
else
mimic="\tinclude\t\t${originalstack}";
fi;
shift;
shift;
while [[ -n $1 ]]; do
hasq $1 ${authlevels} || die "unknown level type";
echo -e "$1${mimic}" >> ${pamdfile};
shift;
done
}
pamd_mimic_system ()
{
[[ $# -lt 2 ]] && die "pamd_mimic_system requires at least two argments";
pamd_mimic system-auth "$@"
}
pkg_nofetch ()
{
_eapi0_pkg_nofetch "$@"
}
prep_ml_includes ()
{
if [[ $(number_abis) -gt 1 ]]; then
local dir;
local dirs;
local base;
if [[ $# -eq 0 ]]; then
dirs=/usr/include;
else
dirs="$@";
fi;
for dir in ${dirs};
do
base=${T}/gentoo-multilib/${dir}/gentoo-multilib;
mkdir -p "${base}";
[[ -d ${base}/${ABI} ]] && rm -rf "${base}/${ABI}";
mv "${D}/${dir}" "${base}/${ABI}";
done;
if is_final_abi; then
base=${T}/gentoo-multilib;
pushd "${base}";
find . | tar -c -T - -f - | tar -x --no-same-owner -f - -C ${D};
popd;
set --;
for dir in ${dirs};
do
set -- "$@" "${dir}";
local abi;
for abi in $(get_install_abis);
do
set -- "$@" "$(get_abi_CDEFINE ${abi}):${dir}/gentoo-multilib/${abi}";
done;
create_ml_includes "$@";
done;
fi;
fi
}
preserve_old_lib ()
{
if [[ ${EBUILD_PHASE} != "preinst" ]]; then
eerror "preserve_old_lib() must be called from pkg_preinst() only";
die "Invalid preserve_old_lib() usage";
fi;
[[ -z $1 ]] && die "Usage: preserve_old_lib <library to preserve> [more libraries to preserve]";
has preserve-libs ${FEATURES} && return 0;
local lib dir;
for lib in "$@";
do
[[ -e ${ROOT}/${lib} ]] || continue;
dir=${lib%/*};
dodir ${dir} || die "dodir ${dir} failed";
cp "${ROOT}"/${lib} "${D}"/${lib} || die "cp ${lib} failed";
touch "${D}"/${lib};
done
}
preserve_old_lib_notify ()
{
if [[ ${EBUILD_PHASE} != "postinst" ]]; then
eerror "preserve_old_lib_notify() must be called from pkg_postinst() only";
die "Invalid preserve_old_lib_notify() usage";
fi;
has preserve-libs ${FEATURES} && return 0;
local lib notice=0;
for lib in "$@";
do
[[ -e ${ROOT}/${lib} ]] || continue;
if [[ ${notice} -eq 0 ]]; then
notice=1;
ewarn "Old versions of installed libraries were detected on your system.";
ewarn "In order to avoid breaking packages that depend on these old libs,";
ewarn "the libraries are not being removed. You need to run revdep-rebuild";
ewarn "in order to remove these old dependencies. If you do not have this";
ewarn "helper program, simply emerge the 'gentoolkit' package.";
ewarn;
fi;
ewarn " # revdep-rebuild --library ${lib##*/}";
done;
if [[ ${notice} -eq 1 ]]; then
ewarn;
ewarn "Once you've finished running revdep-rebuild, it should be safe to";
ewarn "delete the old libraries. Here is a copy & paste for the lazy:";
for lib in "$@";
do
ewarn " # rm '${lib}'";
done;
fi
}
raw-ldflags ()
{
local x input="$@";
[[ -z ${input} ]] && input=${LDFLAGS};
set --;
for x in ${input};
do
x=${x#-Wl,};
set -- "$@" ${x//,/ };
done;
echo "$@"
}
replace-cpu-flags ()
{
local newcpu="$#";
newcpu="${!newcpu}";
while [ $# -gt 1 ]; do
replace-flags "-march=${1}" "-march=${newcpu}";
replace-flags "-mcpu=${1}" "-mcpu=${newcpu}";
replace-flags "-mtune=${1}" "-mtune=${newcpu}";
shift;
done;
return 0
}
replace-flags ()
{
[[ $# != 2 ]] && echo && eerror "Usage: replace-flags <old flag> <new flag>" && die "replace-flags takes 2 arguments, not $#";
local f fset;
declare -a new_CFLAGS new_CXXFLAGS new_FFLAGS new_FCFLAGS;
for fset in CFLAGS CXXFLAGS FFLAGS FCFLAGS;
do
for f in ${!fset};
do
[[ ${f} == ${1} ]] && f=${2};
eval new_${fset}\[\${\#new_${fset}\[@]}]=\${f};
done;
eval export ${fset}=\${new_${fset}\[*]};
done;
return 0
}
replace-sparc64-flags ()
{
local SPARC64_CPUS="ultrasparc3 ultrasparc v9";
if [ "${CFLAGS/mtune}" != "${CFLAGS}" ]; then
for x in ${SPARC64_CPUS};
do
CFLAGS="${CFLAGS/-mcpu=${x}/-mcpu=v8}";
done;
else
for x in ${SPARC64_CPUS};
do
CFLAGS="${CFLAGS/-mcpu=${x}/-mcpu=v8 -mtune=${x}}";
done;
fi;
if [ "${CXXFLAGS/mtune}" != "${CXXFLAGS}" ]; then
for x in ${SPARC64_CPUS};
do
CXXFLAGS="${CXXFLAGS/-mcpu=${x}/-mcpu=v8}";
done;
else
for x in ${SPARC64_CPUS};
do
CXXFLAGS="${CXXFLAGS/-mcpu=${x}/-mcpu=v8 -mtune=${x}}";
done;
fi;
export CFLAGS CXXFLAGS
}
seq ()
{
local p=$(type -P seq);
case $# in
1)
min=1 max=$1 step=1
;;
2)
min=$1 max=$2 step=1
;;
3)
min=$1 max=$3 step=$2
;;
*)
die "seq called with wrong number of arguments"
;;
esac;
if [[ -z ${p} ]]; then
local reps;
if [[ ${step} != 0 ]]; then
reps=$(( ($max-$min) / $step +1 ));
else
reps=0;
fi;
jot $reps $min $max $step;
else
"${p}" $min $step $max;
fi
}
setup-allowed-flags ()
{
if [[ -z ${ALLOWED_FLAGS} ]]; then
export ALLOWED_FLAGS="-pipe";
export ALLOWED_FLAGS="${ALLOWED_FLAGS} -O -O0 -O1 -O2 -mcpu -march -mtune";
export ALLOWED_FLAGS="${ALLOWED_FLAGS} -fstack-protector -fstack-protector-all";
export ALLOWED_FLAGS="${ALLOWED_FLAGS} -fbounds-checking";
export ALLOWED_FLAGS="${ALLOWED_FLAGS} -fno-PIE -fno-pie -fno-unit-at-a-time";
export ALLOWED_FLAGS="${ALLOWED_FLAGS} -g -g[0-9] -ggdb -ggdb[0-9] -gstabs -gstabs+";
export ALLOWED_FLAGS="${ALLOWED_FLAGS} -fno-ident";
export ALLOWED_FLAGS="${ALLOWED_FLAGS} -W* -w";
fi;
ALLOWED_FLAGS="${ALLOWED_FLAGS} -fno-stack-protector -fno-stack-protector-all -fno-strict-aliasing -fno-bounds-checking";
ALLOWED_FLAGS="${ALLOWED_FLAGS} -mregparm -mno-app-regs -mapp-regs -mno-mmx -mno-sse -mno-sse2 -mno-sse3 -mno-3dnow -mips1 -mips2 -mips3 -mips4 -mips32 -mips64 -mips16 -msoft-float -mno-soft-float -mhard-float -mno-hard-float -mfpu -mieee -mieee-with-inexact -mschedule -mtls-direct-seg-refs -mno-tls-direct-seg-refs -mflat -mno-flat -mno-faster-structs -mfaster-structs -m32 -m64 -mabi -mlittle-endian -mbig-endian -EL -EB -fPIC -mlive-g0 -mcmodel -mstack-bias -mno-stack-bias -msecure-plt -D*";
export UNSTABLE_FLAGS="-Os -O3 -freorder-blocks";
return 0
}
src_compile ()
{
if use ppc || use ppc64; then
filter-flags -mabi=altivec;
filter-flags -maltivec;
append-flags -U__VEC__;
fi;
unset BC_ENV_ARGS;
econf --with-x-app-defaults=/usr/share/X11/app-defaults --with-hackdir=/usr/$(get_libdir)/misc/${PN} --with-configdir=/usr/share/${PN}/config --x-libraries=/usr/$(get_libdir) --x-includes=/usr/include --with-dpms-ext --with-xf86vmode-ext --with-xf86gamma-ext --with-randr-ext --with-proc-interrupts --with-xpm --with-xshm-ext --with-xdbe-ext --enable-locking --without-kerberos --without-gle --with-gtk --with-pixbuf $(use_with suid setuid-hacks) $(use_with new-login login-manager) $(use_with xinerama xinerama-ext) $(use_with pam) $(use_with opengl gl) $(use_with jpeg);
emake -j1 || die "emake failed."
}
src_install ()
{
emake install_prefix="${D}" install || die "emake install failed.";
dodoc README{,.hacking};
use pam && fperms 755 /usr/bin/${PN};
pamd_mimic_system ${PN} auth;
rm -f "${D}"/usr/share/${PN}/config/{electricsheep,fireflies}.xml;
dodir /usr/share/man/man6x;
mv "${D}"/usr/share/man/man6/worm.6 "${D}"/usr/share/man/man6x/worm.6x
}
src_test ()
{
_eapi0_src_test "$@"
}
src_unpack ()
{
unpack ${A};
cd "${S}";
EPATCH_SUFFIX="patch" epatch "${FILESDIR}"/${PV};
eautoreconf
}
strip-flags ()
{
local x y flag NEW_CFLAGS NEW_CXXFLAGS NEW_FFLAGS NEW_FCFLAGS;
setup-allowed-flags;
local NEW_CFLAGS="";
local NEW_CXXFLAGS="";
local NEW_FFLAGS="";
local NEW_FCFLAGS="";
if has ~$(tc-arch) ${ACCEPT_KEYWORDS}; then
ALLOWED_FLAGS="${ALLOWED_FLAGS} ${UNSTABLE_FLAGS}";
fi;
set -f;
for x in ${CFLAGS};
do
for y in ${ALLOWED_FLAGS};
do
flag=${x%%=*};
if [ "${flag%%${y}}" = "" ]; then
NEW_CFLAGS="${NEW_CFLAGS} ${x}";
break;
fi;
done;
done;
for x in ${CXXFLAGS};
do
for y in ${ALLOWED_FLAGS};
do
flag=${x%%=*};
if [ "${flag%%${y}}" = "" ]; then
NEW_CXXFLAGS="${NEW_CXXFLAGS} ${x}";
break;
fi;
done;
done;
for x in ${FFLAGS};
do
for y in ${ALLOWED_FLAGS};
do
flag=${x%%=*};
if [ "${flag%%${y}}" = "" ]; then
NEW_FFLAGS="${NEW_FFLAGS} ${x}";
break;
fi;
done;
done;
for x in ${FCFLAGS};
do
for y in ${ALLOWED_FLAGS};
do
flag=${x%%=*};
if [ "${flag%%${y}}" = "" ]; then
NEW_FCFLAGS="${NEW_FCFLAGS} ${x}";
break;
fi;
done;
done;
if [ "${CFLAGS/-O}" != "${CFLAGS}" -a "${NEW_CFLAGS/-O}" = "${NEW_CFLAGS}" ]; then
NEW_CFLAGS="${NEW_CFLAGS} -O2";
fi;
if [ "${CXXFLAGS/-O}" != "${CXXFLAGS}" -a "${NEW_CXXFLAGS/-O}" = "${NEW_CXXFLAGS}" ]; then
NEW_CXXFLAGS="${NEW_CXXFLAGS} -O2";
fi;
if [ "${FFLAGS/-O}" != "${FFLAGS}" -a "${NEW_FFLAGS/-O}" = "${NEW_FFLAGS}" ]; then
NEW_FFLAGS="${NEW_FFLAGS} -O2";
fi;
if [ "${FCFLAGS/-O}" != "${FCFLAGS}" -a "${NEW_FCFLAGS/-O}" = "${NEW_FCFLAGS}" ]; then
NEW_FCFLAGS="${NEW_FCFLAGS} -O2";
fi;
set +f;
export CFLAGS="${NEW_CFLAGS}";
export CXXFLAGS="${NEW_CXXFLAGS}";
export FFLAGS="${NEW_FFLAGS}";
export FCFLAGS="${NEW_FCFLAGS}";
return 0
}
strip-linguas ()
{
local ls newls nols;
if [[ $1 == "-i" ]] || [[ $1 == "-u" ]]; then
local op=$1;
shift;
ls=$(find "$1" -name '*.po' -exec basename {} .po \;);
shift;
local d f;
for d in "$@";
do
if [[ ${op} == "-u" ]]; then
newls=${ls};
else
newls="";
fi;
for f in $(find "$d" -name '*.po' -exec basename {} .po \;);
do
if [[ ${op} == "-i" ]]; then
hasq ${f} ${ls} && newls="${newls} ${f}";
else
hasq ${f} ${ls} || newls="${newls} ${f}";
fi;
done;
ls=${newls};
done;
else
ls="$@";
fi;
nols="";
newls="";
for f in ${LINGUAS};
do
if hasq ${f} ${ls}; then
newls="${newls} ${f}";
else
nols="${nols} ${f}";
fi;
done;
[[ -n ${nols} ]] && ewarn "Sorry, but ${PN} does not support the LINGUAs:" ${nols};
export LINGUAS=${newls:1}
}
strip-unsupported-flags ()
{
export CFLAGS=$(test-flags-CC ${CFLAGS});
export CXXFLAGS=$(test-flags-CXX ${CXXFLAGS});
export FFLAGS=$(test-flags-F77 ${FFLAGS});
export FCFLAGS=$(test-flags-FC ${FCFLAGS})
}
tc-arch ()
{
tc-ninja_magic_to_arch portage "$@"
}
tc-arch-kernel ()
{
tc-ninja_magic_to_arch kern "$@"
}
tc-endian ()
{
local host=$1;
[[ -z ${host} ]] && host=${CTARGET:-${CHOST}};
host=${host%%-*};
case ${host} in
alpha*)
echo big
;;
arm*b*)
echo big
;;
arm*)
echo little
;;
cris*)
echo little
;;
hppa*)
echo big
;;
i?86*)
echo little
;;
ia64*)
echo little
;;
m68*)
echo big
;;
mips*l*)
echo little
;;
mips*)
echo big
;;
powerpc*)
echo big
;;
s390*)
echo big
;;
sh*b*)
echo big
;;
sh*)
echo little
;;
sparc*)
echo big
;;
x86_64*)
echo little
;;
*)
echo wtf
;;
esac
}
tc-export ()
{
local var;
for var in "$@";
do
[[ $(type -t tc-get${var}) != "function" ]] && die "tc-export: invalid export variable '${var}'";
eval tc-get${var} > /dev/null;
done
}
tc-getAR ()
{
tc-getPROG AR ar "$@"
}
tc-getAS ()
{
tc-getPROG AS as "$@"
}
tc-getBUILD_CC ()
{
local v;
for v in CC_FOR_BUILD BUILD_CC HOSTCC;
do
if [[ -n ${!v} ]]; then
export BUILD_CC=${!v};
echo "${!v}";
return 0;
fi;
done;
local search=;
if [[ -n ${CBUILD} ]]; then
search=$(type -p ${CBUILD}-gcc);
search=${search##*/};
fi;
search=${search:-gcc};
export BUILD_CC=${search};
echo "${search}"
}
tc-getCC ()
{
tc-getPROG CC gcc "$@"
}
tc-getCPP ()
{
tc-getPROG CPP cpp "$@"
}
tc-getCXX ()
{
tc-getPROG CXX g++ "$@"
}
tc-getF77 ()
{
tc-getPROG F77 f77 "$@"
}
tc-getFC ()
{
tc-getPROG FC gfortran "$@"
}
tc-getGCJ ()
{
tc-getPROG GCJ gcj "$@"
}
tc-getLD ()
{
tc-getPROG LD ld "$@"
}
tc-getNM ()
{
tc-getPROG NM nm "$@"
}
tc-getPROG ()
{
local var=$1;
local prog=$2;
if [[ -n ${!var} ]]; then
echo "${!var}";
return 0;
fi;
local search=;
[[ -n $3 ]] && search=$(type -p "$3-${prog}");
[[ -z ${search} && -n ${CHOST} ]] && search=$(type -p "${CHOST}-${prog}");
[[ -n ${search} ]] && prog=${search##*/};
export ${var}=${prog};
echo "${!var}"
}
tc-getRANLIB ()
{
tc-getPROG RANLIB ranlib "$@"
}
tc-getSTRIP ()
{
tc-getPROG STRIP strip "$@"
}
tc-is-cross-compiler ()
{
return $([[ ${CBUILD:-${CHOST}} != ${CHOST} ]])
}
tc-is-softfloat ()
{
case ${CTARGET} in
bfin* | h8300*)
echo "only"
;;
*)
[[ ${CTARGET//_/-} == *-softfloat-* ]] && echo "yes" || echo "no"
;;
esac
}
tc-ninja_magic_to_arch ()
{
function ninj ()
{
[[ ${type} == "kern" ]] && echo $1 || echo $2
};
local type=$1;
local host=$2;
[[ -z ${host} ]] && host=${CTARGET:-${CHOST}};
case ${host} in
alpha*)
echo alpha
;;
arm*)
echo arm
;;
avr*)
ninj avr32 avr
;;
bfin*)
ninj blackfin bfin
;;
cris*)
echo cris
;;
hppa*)
ninj parisc hppa
;;
i?86*)
if [[ ${type} == "kern" ]] && [[ $(KV_to_int ${KV}) -lt $(KV_to_int 2.6.24) || ${host} == *freebsd* ]]; then
echo i386;
else
echo x86;
fi
;;
ia64*)
echo ia64
;;
m68*)
echo m68k
;;
mips*)
echo mips
;;
nios2*)
echo nios2
;;
nios*)
echo nios
;;
powerpc*)
if [[ $(KV_to_int ${KV}) -ge $(KV_to_int 2.6.16) ]] && [[ ${type} == "kern" ]]; then
echo powerpc;
else
if [[ $(KV_to_int ${KV}) -eq $(KV_to_int 2.6.15) ]] && [[ ${type} == "kern" ]]; then
if [[ ${host} == powerpc64* ]] || [[ ${PROFILE_ARCH} == "ppc64" ]]; then
echo powerpc;
else
echo ppc;
fi;
else
if [[ ${host} == powerpc64* ]]; then
echo ppc64;
else
if [[ ${PROFILE_ARCH} == "ppc64" ]]; then
ninj ppc64 ppc;
else
echo ppc;
fi;
fi;
fi;
fi
;;
s390*)
echo s390
;;
sh64*)
ninj sh64 sh
;;
sh*)
echo sh
;;
sparc64*)
ninj sparc64 sparc
;;
sparc*)
[[ ${PROFILE_ARCH} == "sparc64" ]] && ninj sparc64 sparc || echo sparc
;;
vax*)
echo vax
;;
x86_64*)
if [[ ${type} == "kern" ]] && [[ $(KV_to_int ${KV}) -ge $(KV_to_int 2.6.24) ]]; then
echo x86;
else
ninj x86_64 amd64;
fi
;;
*)
echo unknown
;;
esac
}
test-flag-CC ()
{
test-flag-PROG "CC" "$1"
}
test-flag-CXX ()
{
test-flag-PROG "CXX" "$1"
}
test-flag-F77 ()
{
test-flag-PROG "F77" "$1"
}
test-flag-FC ()
{
test-flag-PROG "FC" "$1"
}
test-flag-PROG ()
{
local comp=$1;
local flags="$2";
[[ -z ${comp} || -z ${flags} ]] && return 1;
local PROG=$(tc-get${comp});
${PROG} ${flags} -S -o /dev/null -xc /dev/null > /dev/null 2>&1
}
test-flags ()
{
test-flags-CC "$@"
}
test-flags-CC ()
{
test-flags-PROG "CC" "$@"
}
test-flags-CXX ()
{
test-flags-PROG "CXX" "$@"
}
test-flags-F77 ()
{
test-flags-PROG "F77" "$@"
}
test-flags-FC ()
{
test-flags-PROG "FC" "$@"
}
test-flags-PROG ()
{
local comp=$1;
local flags;
local x;
shift;
[[ -z ${comp} ]] && return 1;
x="";
for x in "$@";
do
test-flag-${comp} "${x}" && flags="${flags}${flags:+ }${x}";
done;
echo "${flags}";
[[ -n ${flags} ]]
}
test_flag ()
{
ewarn "test_flag: deprecated, please use test-flags()!" 1>&2;
test-flags-CC "$@"
}
test_version_info ()
{
if [[ $($(tc-getCC) --version 2>&1) == *$1* ]]; then
return 0;
else
return 1;
fi
}
treecopy ()
{
dest=${!#};
files_count=$#;
while (( $# > 1 )); do
dirstruct=$(dirname "$1");
mkdir -p "${dest}/${dirstruct}";
cp -pPR "$1" "${dest}/${dirstruct}";
shift;
done
}
uclibctoolize ()
{
ewarn "uclibctoolize() is deprecated, please just use elibtoolize()!";
elibtoolize
}
unpack_makeself ()
{
local src_input=${1:-${A}};
local src=$(find_unpackable_file "${src_input}");
local skip=$2;
local exe=$3;
[[ -z ${src} ]] && die "Could not locate source for '${src_input}'";
local shrtsrc=$(basename "${src}");
echo ">>> Unpacking ${shrtsrc} to ${PWD}";
if [[ -z ${skip} ]]; then
local ver=$(grep -a '#.*Makeself' "${src}" | awk '{print $NF}');
local skip=0;
exe=tail;
case ${ver} in
1.5.* | 1.6.0-nv)
skip=$(grep -a ^skip= "${src}" | cut -d= -f2)
;;
2.0 | 2.0.1)
skip=$(grep -a ^' 'tail "${src}" | awk '{print $2}' | cut -b2-)
;;
2.1.1)
skip=$(grep -a ^offset= "${src}" | awk '{print $2}' | cut -b2-);
let skip="skip + 1"
;;
2.1.2)
skip=$(grep -a ^offset= "${src}" | awk '{print $3}' | head -n 1);
let skip="skip + 1"
;;
2.1.3)
skip=`grep -a ^offset= "${src}" | awk '{print $3}'`;
let skip="skip + 1"
;;
2.1.4 | 2.1.5)
skip=$(grep -a offset=.*head.*wc "${src}" | awk '{print $3}' | head -n 1);
skip=$(head -n ${skip} "${src}" | wc -c);
exe="dd"
;;
*)
eerror "I'm sorry, but I was unable to support the Makeself file.";
eerror "The version I detected was '${ver}'.";
eerror "Please file a bug about the file ${shrtsrc} at";
eerror "http://bugs.gentoo.org/ so that support can be added.";
die "makeself version '${ver}' not supported"
;;
esac;
debug-print "Detected Makeself version ${ver} ... using ${skip} as offset";
fi;
case ${exe} in
tail)
exe="tail -n +${skip} '${src}'"
;;
dd)
exe="dd ibs=${skip} skip=1 obs=1024 conv=sync if='${src}'"
;;
*)
die "makeself cant handle exe '${exe}'"
;;
esac;
local tmpfile=$(emktemp);
eval ${exe} 2> /dev/null | head -c 512 > "${tmpfile}";
local filetype=$(file -b "${tmpfile}");
case ${filetype} in
*tar\ archive*)
eval ${exe} | tar --no-same-owner -xf -
;;
bzip2*)
eval ${exe} | bzip2 -dc | tar --no-same-owner -xf -
;;
gzip*)
eval ${exe} | tar --no-same-owner -xzf -
;;
compress*)
eval ${exe} | gunzip | tar --no-same-owner -xf -
;;
*)
eerror "Unknown filetype \"${filetype}\" ?";
false
;;
esac;
_pipestatus="${PIPESTATUS[*]}";
[[ "${_pipestatus// /}" -eq 0 ]] || die "failure unpacking (${filetype}) makeself ${shrtsrc} ('${ver}' +${skip})"
}
unpack_pdv ()
{
local src=$(find_unpackable_file "$1");
local sizeoff_t=$2;
[[ -z ${src} ]] && die "Could not locate source for '$1'";
[[ -z ${sizeoff_t} ]] && die "No idea what off_t size was used for this pdv :(";
local shrtsrc=$(basename "${src}");
echo ">>> Unpacking ${shrtsrc} to ${PWD}";
local metaskip=$(tail -c ${sizeoff_t} "${src}" | hexdump -e \"%i\");
local tailskip=$(tail -c $((${sizeoff_t}*2)) "${src}" | head -c ${sizeoff_t} | hexdump -e \"%i\");
local metafile=$(emktemp);
tail -c +$((${metaskip}+1)) "${src}" > "${metafile}";
local datafile=$(tail -c +$((${metaskip}+1)) "${src}" | strings | head -n 1);
datafile=$(basename "${datafile}");
local tmpfile=$(emktemp);
tail -c +$((${tailskip}+1)) ${src} 2> /dev/null | head -c 512 > ${tmpfile};
local iscompressed=$(file -b "${tmpfile}");
if [[ ${iscompressed:0:8} == "compress" ]]; then
iscompressed=1;
mv ${tmpfile}{,.Z};
gunzip ${tmpfile};
else
iscompressed=0;
fi;
local istar=$(file -b "${tmpfile}");
if [[ ${istar:0:9} == "POSIX tar" ]]; then
istar=1;
else
istar=0;
fi;
if [ ${iscompressed} -eq 1 ]; then
if [ ${istar} -eq 1 ]; then
tail -c +$((${tailskip}+1)) ${src} 2> /dev/null | head -c $((${metaskip}-${tailskip})) | tar -xzf -;
else
tail -c +$((${tailskip}+1)) ${src} 2> /dev/null | head -c $((${metaskip}-${tailskip})) | gzip -dc > ${datafile};
fi;
else
if [ ${istar} -eq 1 ]; then
tail -c +$((${tailskip}+1)) ${src} 2> /dev/null | head -c $((${metaskip}-${tailskip})) | tar --no-same-owner -xf -;
else
tail -c +$((${tailskip}+1)) ${src} 2> /dev/null | head -c $((${metaskip}-${tailskip})) > ${datafile};
fi;
fi;
true
}
validate_desktop_entries ()
{
if [[ -x /usr/bin/desktop-file-validate ]]; then
einfo "Checking desktop entry validity";
local directories="";
for d in /usr/share/applications $@;
do
[[ -d ${D}${d} ]] && directories="${directories} ${D}${d}";
done;
if [[ -n ${directories} ]]; then
for FILE in $(find ${directories} -name "*\.desktop" -not -path '*.hidden*' | sort -u 2>/dev/null);
do
local temp=$(desktop-file-validate ${FILE} | grep -v "warning:" | sed -e "s|error: ||" -e "s|${FILE}:|--|g" );
[[ -n $temp ]] && elog ${temp/--/${FILE/${D}/}:};
done;
fi;
echo "";
else
einfo "Passing desktop entry validity check. Install dev-util/desktop-file-utils, if you want to help to improve Gentoo.";
fi
}
declare -x ALSA_CARDS=""
declare -x ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol"
declare -x APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias"
declare -x ARCH="x86"
declare -x CBUILD="i686-pc-linux-gnu"
declare -x CDEFINE_default="__unix__"
declare -x CFLAGS="-O2 -march=prescott -fomit-frame-pointer -pipe"
declare -x CFLAGS_default=""
declare -x CHOST="i686-pc-linux-gnu"
declare -x CHOST_default="i686-pc-linux-gnu"
declare -x CLASSPATH="."
declare -x CROSSCOMPILE_OPTS=""
declare -x CTARGET_default="i686-pc-linux-gnu"
declare -x CVS_RSH="ssh"
declare -x CXXFLAGS="-O2 -march=prescott -fomit-frame-pointer -pipe"
declare -x DEFAULT_ABI="default"
declare -x DESTTREE="/usr"
declare -x DIROPTIONS="-m0755"
declare -x EAPI="0"
declare -x ELIBC="glibc"
declare -x EXEOPTIONS="-m0755"
declare -x FEATURES="distcc distlocks parallel-fetch preserve-libs protect-owned sandbox sfperms strict unmerge-orphans userfetch userpriv usersandbox"
declare -x FLTK_DOCDIR="/usr/share/doc/fltk-1.1.7-r3/html"
declare -x GCC_SPECS=""
declare -x GDK_USE_XFT="1"
declare -x INHERITED="toolchain-funcs portability flag-o-matic multilib libtool autotools pam eutils"
declare -x INPUT_DEVICES="keyboard mouse evdev"
declare -x INSDESTTREE=""
declare -x INSOPTIONS="-m0644"
declare -x KDEDIRS="/usr:/usr/local:/usr/kde/3.5"
declare -x KERNEL="linux"
declare -x KERNEL_ABI="default"
declare -x KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~mips ~ppc ~ppc64 ~sh ~sparc ~x86 ~x86-fbsd"
declare -x KV="2.6.27-gentoo-r1"
declare -x LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text"
declare -x LDFLAGS="-Wl,-O1"
declare -x LDFLAGS_default=""
declare -x LIBDIR_default="lib"
declare -x LIBOPTIONS="-m0644"
declare -x LICENSE="BSD"
declare -x MAIL="/var/mail/minn"
declare -x MAKEOPTS="-j3"
declare -x MULTILIB_ABIS="default"
declare -x OPENGL_PROFILE="xorg-x11"
declare -x PKG_CONFIG_PATH="/usr/qt/3/lib/pkgconfig"
declare -x PORTAGE_COMPRESS_EXCLUDE_SUFFIXES="css gif htm[l]? jp[e]?g js pdf png"
declare -x PORTAGE_NICENESS="3"
declare -x PRELINK_PATH_MASK="/usr/lib/klibc"
declare -x PROFILE_ONLY_VARIABLES="ARCH ELIBC KERNEL USERLAND"
declare -x PROPERTIES=""
declare -x PROVIDE=""
declare -x QMAKESPEC="linux-g++"
declare -x QTDIR="/usr/qt/3"
declare -x RESTRICT=""
declare -x S="/var/tmp/portage/x11-misc/xscreensaver-5.07/work/xscreensaver-5.07"
declare -x SANDBOX_DENY="/etc/ld.so.preload"
declare -x SANDBOX_PREDICT=":/dev/console:/dev/random:/proc/self/maps:/usr/lib/python2.0/:/usr/lib/python2.1/:/usr/lib/python2.2/:/usr/lib/python2.3/:/usr/lib/python2.4/:/usr/lib/python2.5/:/usr/lib/python3.0/:/var/db/aliases.db:/var/db/ethers.db:/var/db/group.db:/var/db/hosts.db:/var/db/netgroup.db:/var/db/netmasks.db:/var/db/networks.db:/var/db/passwd.db:/var/db/protocols.db:/var/db/rpc.db:/var/db/services.db:/var/tmp/portage/x11-misc/xscreensaver-5.07/homedir/.:"
declare -x SANDBOX_READ=":/:/dev/shm:/dev/stdin:/var/tmp:"
declare -x SANDBOX_WRITE=":/dev/console:/dev/fd:/dev/null:/dev/pts/:/dev/pty:/dev/shm:/dev/shm/ngpt:/dev/stderr:/dev/stdout:/dev/tts:/dev/tty:/dev/vc/:/dev/zero:/proc/self/fd:/tmp:/tmp/:/usr/lib/cf:/usr/lib/conftest:/usr/lib32/cf:/usr/lib32/conftest:/usr/lib64/cf:/usr/lib64/conftest:/usr/tmp/cf:/usr/tmp/conftest:/var/log/scrollkeeper.log:/var/tmp:/var/tmp/:/var/tmp/portage/x11-misc/xscreensaver-5.07/homedir/.bash_history:/var/tmp/portage/x11-misc/xscreensaver-5.07/homedir/.gconfd/lock:"
declare -x SANE_CONFIG_DIR="/etc/sane.d"
declare -x SLOT="0"
declare -x SUDO_COMMAND="/bin/bash"
declare -x SUDO_GID="1006"
declare -x SUDO_UID="1000"
declare -x SUDO_USER="minn"
declare -x USE="elibc_glibc jpeg kernel_linux pam suid userland_GNU x86 xinerama"
declare -x USERLAND="GNU"
declare -x USERNAME="root"
declare -x VIDEO_CARDS=""
declare -x WANT_AUTOCONF="2.5"
declare -x WANT_AUTOMAKE="1.10"
declare -x WINDOWID="46137351"
declare -x XDG_DATA_DIRS="/usr/share:/usr/local/share:/usr/kde/3.5/share"
declare -x _E_DOCDESTTREE_=""
declare -x _E_EXEDESTTREE_=""
declare -x repository="gentoo"
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [gentoo-user] xscreensaver compilation failed
2008-11-03 8:17 ` Ducky
@ 2008-11-03 8:17 ` Ducky
2008-11-03 8:22 ` Ducky
2008-11-03 8:21 ` Jeremy McSpadden
1 sibling, 1 reply; 9+ messages in thread
From: Ducky @ 2008-11-03 8:17 UTC (permalink / raw
To: gentoo-user
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [gentoo-user] xscreensaver compilation failed
2008-11-03 8:17 ` Ducky
2008-11-03 8:17 ` Ducky
@ 2008-11-03 8:21 ` Jeremy McSpadden
2008-11-03 8:35 ` Ducky
1 sibling, 1 reply; 9+ messages in thread
From: Jeremy McSpadden @ 2008-11-03 8:21 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 2303 bytes --]
On Mon, 2008-11-03 at 16:17 +0800, Ducky wrote:
> I'm sorry. I've now attached the build.log.
>
>
>
> On Mon, Nov 3, 2008 at 4:10 PM, Jeremy McSpadden <deface@uberpenguin.net> wrote:
> > On Mon, 2008-11-03 at 16:01 +0800, Ducky wrote:
> >
> > Hello,
> >
> > My xscreensaver failed to build. Not sure what's wrong. I've tried
> > versions starting from 5.05.
> >
> > [ebuild N ] x11-misc/xscreensaver-5.07 USE="jpeg opengl pam suid
> > xinerama -new-login" 0 kB
> >
> > I tried to disable each options, it didn't help much.
> >
> > It failed at econf.
> >
> > ...
> > config.status: creating driver/XScreenSaver.ad
> > config.status: creating config.h
> > config.status: executing default-1 commands
> > config.status: executing po/stamp-it commands
> > config.status: error: po/Makefile.in.in was not created by intltoolize.
> > ...
> > ...
> > *
> > * ERROR: x11-misc/xscreensaver-5.07 failed.
> > * Call stack:
> > * ebuild.sh, line 49: Called src_compile
> > * environment, line 2950: Called econf
> > '--with-x-app-defaults=/usr/share/X11/app-defaults'
> > '--with-hackdir=/usr/lib/misc/xscreensaver'
> > '--with-configdir=/usr/share/xscreensaver/config'
> > '--x-libraries=/usr/lib' '--x-includes=/usr/include' '--with-dpms-ext'
> > '--with-xf86vmode-ext' '--with-xf86gamma-ext' '--with-randr-ext'
> > '--with-proc-interrupts' '--with-xpm' '--with-xshm-ext'
> > '--with-xdbe-ext' '--enable-locking' '--without-kerberos'
> > '--without-gle' '--with-gtk' '--with-pixbuf' '--with-setuid-hacks'
> > '--without-login-manager' '--with-xinerama-ext' '--with-pam'
> > '--without-gl' '--with-jpeg'
> > * ebuild.sh, line 525: Called die
> > * The specific snippet of code:
> > * die "econf failed"
> > * The die message:
> > * econf failed
> > *
> > * If you need support, post the topmost build error, and the call
> > stack if relevant.
> > * A complete build log is located at
> > '/var/tmp/portage/x11-misc/xscreensaver-5.07/temp/build.log'.
> > * The ebuild environment file is located at
> > '/var/tmp/portage/x11-misc/xscreensaver-5.07/temp/environment'.
> > *
> >
> > Any idea?
> >
> > Thanks,
> >
> > I'd try posting the full log, not the snippets you think are relevant.
> >
> >
> >
>
>
>
That looks like an env, not a build log.
Jeremy McSpadden
UberPenguin.net
[-- Attachment #2: Type: text/html, Size: 2789 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [gentoo-user] xscreensaver compilation failed
2008-11-03 8:17 ` Ducky
@ 2008-11-03 8:22 ` Ducky
0 siblings, 0 replies; 9+ messages in thread
From: Ducky @ 2008-11-03 8:22 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 1 bytes --]
[-- Attachment #2: build.log --]
[-- Type: application/octet-stream, Size: 13724 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [gentoo-user] xscreensaver compilation failed
2008-11-03 8:21 ` Jeremy McSpadden
@ 2008-11-03 8:35 ` Ducky
2008-11-03 8:40 ` Jeremy McSpadden
0 siblings, 1 reply; 9+ messages in thread
From: Ducky @ 2008-11-03 8:35 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 44 bytes --]
I've just attached build.log again.
Thanks
[-- Attachment #2: build.log --]
[-- Type: application/octet-stream, Size: 13724 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [gentoo-user] xscreensaver compilation failed
2008-11-03 8:35 ` Ducky
@ 2008-11-03 8:40 ` Jeremy McSpadden
2008-11-03 8:54 ` Ducky
0 siblings, 1 reply; 9+ messages in thread
From: Jeremy McSpadden @ 2008-11-03 8:40 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 239 bytes --]
On Mon, 2008-11-03 at 16:35 +0800, Ducky wrote:
> I've just attached build.log again.
>
> Thanks
http://bugs.gentoo.org/show_bug.cgi?format=multiple&id=240958
Looks like the bug has already been filed.
Jeremy McSpadden
UberPenguin.net
[-- Attachment #2: Type: text/html, Size: 694 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [gentoo-user] xscreensaver compilation failed
2008-11-03 8:40 ` Jeremy McSpadden
@ 2008-11-03 8:54 ` Ducky
0 siblings, 0 replies; 9+ messages in thread
From: Ducky @ 2008-11-03 8:54 UTC (permalink / raw
To: gentoo-user
Hi Jeremy,
Thanks for the bug id... I was able to compile it after intltool was
downgraded..
Cheers!
On Mon, Nov 3, 2008 at 4:40 PM, Jeremy McSpadden <deface@uberpenguin.net> wrote:
> On Mon, 2008-11-03 at 16:35 +0800, Ducky wrote:
>
> I've just attached build.log again.
>
> Thanks
>
> http://bugs.gentoo.org/show_bug.cgi?format=multiple&id=240958
> Looks like the bug has already been filed.
>
> Jeremy McSpadden
> UberPenguin.net
--
./D
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2008-11-03 8:54 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-11-03 8:01 [gentoo-user] xscreensaver compilation failed Ducky
2008-11-03 8:10 ` Jeremy McSpadden
2008-11-03 8:17 ` Ducky
2008-11-03 8:17 ` Ducky
2008-11-03 8:22 ` Ducky
2008-11-03 8:21 ` Jeremy McSpadden
2008-11-03 8:35 ` Ducky
2008-11-03 8:40 ` Jeremy McSpadden
2008-11-03 8:54 ` Ducky
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox