Re: [gentoo-user] high packet loss

["Devon Miller" <devon.c.miller@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 1257 bytes --]

I had something like this a while back, it turned out it was the dsl modem
was picking up RF interference from a dimmer switch.
If the light was full on or full off it was fine, but anywhere in between
and it dropped packets like crazy. I added a choke on the lamp's power line
and it's been fine since. YMMV.

dcm

On 7/27/06, Eray Aslan <eray.aslan@caf.com.tr> wrote:
>
> Hello,
>
> I wanted to change the router/firewall at a small office lan to hardened
> gentoo.  The machine in question sits between a consumer grade adsl modem
> and 3 different networks (so a total of 4 eth cards on the server).
>
> However, there is a high packet loss (25-50%) between server and adsl
> modem.  cat /proc/net/dev reveals high error count on the receive side of
> the eth card connected to modem (transmit side has no errors).  I changed
> the eth card and the network cable but the problem stays the same.
>
> The same eth card and cable works without any errors with a FC3 server.  I
> am beginning to think that the errors are because of a faulty (on my part)
> sofware config.
>
> I am out of ideas to try.  Any pointers to possible causes of high packet
> loss are highly appreciated.
>
> Thank you
> --
> Eray
>
> --
> gentoo-user@gentoo.org mailing list
>
>

[-- Attachment #2: Type: text/html, Size: 1671 bytes --]