From: stefan11111@shitposting.expert
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] Wine problems
Date: Tue, 19 Dec 2023 10:27:14 +0000 [thread overview]
Message-ID: <c4437fe9d9ba4fad69f87387330fb4e7@shitposting.expert> (raw)
In-Reply-To: <1c43989d8da10a5f19a74136defb1bb5@shitposting.expert>
On 2023-12-13 19:29, stefan11111@shitposting.expert wrote:
> On 2023-12-13 19:21, Vít Smolík wrote:
>> st 13. 12. 2023 v 19:51 odesílatel <stefan11111@shitposting.expert>
>> napsal:
>>>
>>> On 2023-12-13 18:46, stefan11111@shitposting.expert wrote:
>>> > On 2023-12-13 16:23, Vít Smolík wrote:
>>> >> st 13. 12. 2023 v 16:58 odesílatel <stefan11111@shitposting.expert>
>>> >> napsal:
>>> >>>
>>> >>> On 2023-12-13 14:55, Vít Smolík wrote:
>>> >>> > st 13. 12. 2023 v 9:28 odesílatel <stefan11111@shitposting.expert>
>>> >>> > napsal:
>>> >>> >>
>>> >>> >> On 2023-12-13 05:34, Vít Smolík wrote:
>>> >>> >> > okay, then dont worry about this.
>>> >>> >> > chceck the xorg log it should be in /var/log/Xorg.<some number>.log.
>>> >>> >> > also check if both the nvidia and intel drivers are loaded correctly.
>>> >>> >> >
>>> >>> >> > May the Force be with you,
>>> >>> >> > Vít Smolík.
>>> >>> >> >
>>> >>> >>
>>> >>> >> I added the Xorg.0.log from optimus as an attachment.
>>> >>> > okay, i checked and i saw these lines:
>>> >>> >
>>> >>> >> [ 32496.682] (**) modeset(1): claimed PCI slot 0@0:2:0
>>> >>> >> [ 32496.682] (II) modeset(1): using default device
>>> >>> >> [ 32496.682] (EE) Screen 1 deleted because of no matching config
>>> >>> >> section.
>>> >>> >> [ 32496.682] (II) UnloadModule: "modesetting"
>>> >>> >
>>> >>> > i think the third line from this citation may be the concern, make
>>> >>> > sure you installed the proprietary nvidia drivers, and disabled
>>> >>> > nouveau (pretty sure you already did that)
>>> >>> > could you send your xorg.conf? it seems to me that the config that
>>> >>> > nvidia-xconfig made is faulty.
>>> >>> >
>>> >>> > --
>>> >>> > May the Force be with you,
>>> >>> > Vít Smolík.
>>> >>> I added my xorg.conf as an attachment
>>> >> okay, try adding this line right after the "Device" line in the
>>> >> "Screen" section:
>>> >>
>>> >> GPUDevice "InactiveDevice1"
>>> >>
>>> >> The config should then look like this:
>>> >>
>>> >>> Section "Screen"
>>> >>> Identifier "Screen0"
>>> >>> Device "Device0"
>>> >>> GPUDevice "InactiveDevice1"
>>> >>> Monitor "Monitor0"
>>> >>> DefaultDepth 24
>>> >>> Option "AllowEmptyInitialConfiguration" "True"
>>> >>> SubSection "Display"
>>> >>> Depth 24
>>> >>> EndSubSection
>>> >>> EndSection
>>> >> (i don't know how the formating will look in this email, but the
>>> >> "GPUDevice" line will be indented the same as the "Device" line)
>>> >>
>>> >> after that, save the config file and start X
>>> > Doing this did have an effect, but not the desired effect.
>>> > I still don't see xorg's display on the laptop screen, but if I
>>> > connect an hdmi cable to the laptop, I get output on an external
>>> > monitor.
>>> Good news, proton works.
>>> I don't get sound with proton though, but that is a known issues with
>>> steam's runtime that can be fixed.
>>> Thanks for helping me so far. Maybe I can even get the display to
>>> work
>>> on the laptop's screen.
>>>
>> i think the fix for your problem will be adding the second monitor to
>> the xorg.conf, you only have 1 monitor configured.
>> would you mind sending me your original xorg config if you still have
>> it?
>>
>
> The xorg config I sent is the only one I had on this laptop.
> Before trying this, I didn't have an xorg config on this laptop.
>
>> also try running xrandr (after starting X), then see all of the
>> outputs and add something like this to your X config
>>>
>>> Section "Monitor"
>>> Identifier "THE THING XRANDR OUTPUTS"
>>> Option "DPMS"
>>> EndSection
>>
>> the xrandr output should look something like this:
>>> Screen 0: minimum 320 x 200, current 3200 x 1080, maximum 8192 x 8192
>>> VGA-1 disconnected (normal left inverted right x axis y axis)
>>> HDMI-1 connected primary 1920x1080+0+0 (normal left inverted right x
>>> axis y axis) 531mm x 299mm
>>> 1920x1080 59.93 + 60.00* 50.00 59.94
>>> 1920x1080i 60.00 50.00 59.94
>>> 1680x1050 59.88
>>> …
>>
>> if you can't figure it out, send the output, i will help you write the
>> config ;D
> This is the output of xrandr:
>
> $ xrandr
> Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
> HDMI-0 connected primary 1920x1080+0+0 (normal left inverted right x
> axis y axis) 698mm x 392mm
> 1920x1080 60.00*+ 60.00 59.94 50.00
> 1680x1050 59.95
> 1600x900 60.00
> 1440x900 59.89
> 1440x576 50.00
> 1400x1050 59.98
> 1280x1024 60.02
> 1280x800 59.81
> 1280x720 60.00 59.96 50.00
> 1024x768 60.00
> 800x600 60.32 56.25
> 720x576 50.00
> 720x480 59.94
> 640x480 59.94
Decided to give this one more shot.
I ran xrandr one again, this time with no xorg.conf.
This is the output, it seems different from last time:
$ xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 16384 x 16384
eDP-1 connected primary 1920x1080+0+0 (normal left inverted right x axis
y axis) 344mm x 193mm
1920x1080 144.00*+ 60.01 60.02 59.97 59.96 59.93
1680x1050 59.95 59.88
1400x1050 74.76 59.98
1600x900 59.99 59.94 59.95 59.82
1280x1024 85.02 75.02 60.02
1400x900 59.96 59.88
1280x960 85.00 60.00
1440x810 60.00 59.97
1368x768 59.88 59.85
1280x800 59.99 59.97 59.81 59.91
1152x864 75.00
1280x720 60.00 59.99 59.86 59.74
1024x768 85.00 75.05 60.04 85.00 75.03 70.07
60.00
1024x768i 86.96
960x720 85.00 75.00 60.00
928x696 75.00 60.05
896x672 75.05 60.01
1024x576 59.95 59.96 59.90 59.82
960x600 59.93 60.00
832x624 74.55
960x540 59.96 59.99 59.63 59.82
800x600 85.00 75.00 70.00 65.00 60.00 85.14
72.19 75.00 60.32 56.25
840x525 60.01 59.88
864x486 59.92 59.57
700x525 74.76 59.98
800x450 59.95 59.82
640x512 85.02 75.02 60.02
700x450 59.96 59.88
640x480 85.09 60.00 85.01 72.81 75.00 59.94
720x405 59.51 58.99
720x400 85.04
684x384 59.88 59.85
640x400 59.88 59.98 85.08
576x432 75.00
640x360 59.86 59.83 59.84 59.32
640x350 85.08
512x384 85.00 75.03 70.07 60.00
512x384i 87.06
512x288 60.00 59.92
416x312 74.66
480x270 59.63 59.82
400x300 85.27 72.19 75.12 60.32 56.34
432x243 59.92 59.57
320x240 85.18 72.81 75.00 60.05
360x202 59.51 59.13
360x200 85.04
320x200 85.27
320x180 59.84 59.32
320x175 85.27
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
next prev parent reply other threads:[~2023-12-19 10:27 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-11 18:31 [gentoo-user] Wine problems stefan11111
2023-12-11 19:01 ` stefan11111
2023-12-11 19:30 ` netfab
2023-12-11 20:01 ` stefan11111
2023-12-12 5:47 ` Vít Smolík
2023-12-12 14:46 ` Vít Smolík
2023-12-12 19:09 ` stefan11111
2023-12-12 19:15 ` Vít Smolík
2023-12-12 20:30 ` stefan11111
2023-12-12 20:49 ` Vít Smolík
2023-12-12 21:16 ` stefan11111
2023-12-12 21:22 ` Vít Smolík
2023-12-12 21:55 ` stefan11111
2023-12-12 22:08 ` Vít Smolík
2023-12-12 22:25 ` stefan11111
2023-12-12 22:49 ` Vít Smolík
2023-12-12 22:54 ` stefan11111
2023-12-12 22:59 ` Vít Smolík
2023-12-12 23:31 ` stefan11111
2023-12-13 5:34 ` Vít Smolík
2023-12-13 8:27 ` stefan11111
2023-12-13 14:55 ` Vít Smolík
2023-12-13 15:57 ` stefan11111
2023-12-13 16:23 ` Vít Smolík
2023-12-13 18:46 ` stefan11111
2023-12-13 18:50 ` stefan11111
2023-12-13 19:21 ` Vít Smolík
2023-12-13 19:26 ` Vít Smolík
2023-12-13 19:29 ` stefan11111
2023-12-13 19:35 ` Vít Smolík
2023-12-13 19:44 ` stefan11111
2023-12-13 19:58 ` Vít Smolík
2023-12-13 20:05 ` stefan11111
2023-12-13 20:13 ` Vít Smolík
2023-12-13 20:25 ` stefan11111
2023-12-13 20:32 ` Vít Smolík
2023-12-13 22:19 ` stefan11111
2023-12-14 9:31 ` Vít Smolík
2023-12-14 13:49 ` Vít Smolík
2023-12-19 10:27 ` stefan11111 [this message]
2024-01-23 14:54 ` stefan11111
2023-12-12 22:42 ` stefan11111
2023-12-12 22:44 ` Vít Smolík
2023-12-12 22:10 ` Jack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c4437fe9d9ba4fad69f87387330fb4e7@shitposting.expert \
--to=stefan11111@shitposting.expert \
--cc=gentoo-user@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox