Re: [gentoo-user] cannot print after changing CUPS printer

["Sarpy Sam" <sarpy.sam@gmail.com>]

On 6/28/06, Michael [Plouj] Ploujnikov <ploujj@gmail.com> wrote:
> On 6/28/06, Mick <michaelkintzios@gmail.com> wrote:
> > Did you by any chance change your /etc/cups/cupsd.conf file settings
> > from the default?
>
> I think this is all I changed:
> --- /etc/cups/cupsd.conf        (revision 367)
> +++ /etc/cups/cupsd.conf        (revision 413)
> @@ -533,7 +533,7 @@
>   #BrowseAddress x.y.255.255
>   #BrowseAddress x.255.255.255
>   #BrowseAddress 255.255.255.255
> -#BrowseAddress @LOCAL
> +BrowseAddress @LOCAL
>   #BrowseAddress @IF(name)
>
>  #
> @@ -768,6 +768,7 @@
>  Order Deny,Allow
>  Deny From All
>  Allow From 127.0.0.1
> +Allow From 10.1.1.*
>  </Location>
>
>  #<Location /classes>
>
>
> > How is your pdfprint connected to the PC?
>
> please ignore pdfprint for the sake of this thread. I am only
> concerned with the other printer -  gray-deskjet: parallel:/dev/lp0
>
> > If they are both connected via your parallel port, have you configured it
> > correctly in your kernel?
>
> There is only one parallel port printer attached to my system, that is
> the printer in question here:
> gray-deskjet: parallel:/dev/lp0
> Yes, I compiled the kernel properly. That is how other machines on my
> LAN can print to this printer, and I can print a test page using CUPS
> web interface.
>
> > Sorry for stating the obvious but the error
> > seems to point to an incorrect route (path) to the printer.  have you
> > tried via USB?
>
> This printer does not have a USB connection, unfortunately.
> The printer model is HP 710c, for your information.
> --
> gentoo-user@gentoo.org mailing list
>
>
I'm sorry if I have missed it but have you looked in your cups error
log for any messages.  Also set your log level to debug and restart
cups to get more detailed messages.

Sam
-- 
gentoo-user@gentoo.org mailing list