public inbox for gentoo-user@lists.gentoo.org
 help / color / mirror / Atom feed
From: <mad.scientist.at.large@tutanota.com>
To: <gentoo-user@lists.gentoo.org>
Subject: Re: [gentoo-user] init id c5 response too fast disabled for 5 min
Date: Sun, 31 Dec 2017 08:44:51 +0100 (CET)	[thread overview]
Message-ID: <L1fWwVt--3-0@tutanota.com> (raw)
In-Reply-To: <9772164b-4c4e-7a5a-b377-6132c4d88755@sys-concept.com>

[-- Attachment #1: Type: text/plain, Size: 4220 bytes --]

likely dying soon, or if you are lucky a key sector went out, if not the drive may be getting worse with every rotation.  If the drive is badly corrupted fsck can damage what is left.   definately DO NOT run fsck without knowing if the hardware has serious problems, also if part of it won't read don't try to long, drive electronics retrain themselves to some extent, trying to recover lost data can cause it to misadjust itself and work worse.  at least it's spinning, it's when the motor electronics suddendly die that you have real problems.  hopefully it's not a samsung drive (they have a classic tendency to die this way, i.e. spindle motor electronics die so platters don't spin).

again however it could be the drive data/power cable.  anything else happen to it recently, i.e. new hardware added or swapped out?  is it an ata or a sata drive?  old/new drive/system?   hopefully it doesn't live near the heat vent......  if it's hotter than normal in the room it could be heat.  low humidity can also cause strange static related problems but they usually happen when you touch or stop touching the keyboard/mouse.  

if it's dry, definately humidify before working on the machine, worse case you can boil a couple of gallons of water on the stove to humidify it temporarily.   under dry conditions i've lost a mother board just from touching the power switch, in a room without carpeting, i was not happy.   also when doing electronics, try not to wear synthetics or other materials known for static (wool is way bad, as are things like silk, if it doesn't get wet easily (won't soak up water) it probably isn't static friendly).

mad.scientist.at.large (a good madscientist)
--
God bless the rich, the greedy and the corrupt politicians they have put into office.   God bless them for helping me do the right thing by giving the rich my little pile of cash.  After all, the rich know what to do with money.


31. Dec 2017 00:28 by thelma@sys-concept.com:


> I boot-strap the system from CD and run:
> fsck /dev/sda5
>
> got bunch of errors eg.:
> Directories count wrong for group #1567 (1, counted=0).
> Fix? yes
>
> Free inodes count wrong for group #1568 (8073, counted=8192).
> Fix? yes
>
> Directories count wrong for group #1568 (1, counted=0).
> Fix? yes
>
> Free inodes count wrong for group #1569 (8103, counted=8192).
> Fix? yes
>
> Directories count wrong for group #1569 (7, counted=0).
> Fix? yes
>
> Now when try to run it again I get:
> fsck /dev/sda5
> Segmentation fault
>
> Is this partition/drive gone?
>
> Joseph
> On 12/31/2017 12:22 AM, > mad.scientist.at.large@tutanota.com>  wrote:
>> that would most likely be a failing/failed hard drive or a bad connection/cable.  I'd suggest carefully checking the cable and then boot off a cd and back up anything you care about on the drive, you might check the SMART status of the drive.  In any case back it up first, worry about understanding it/finding the bug later.  Once everything is backed up you can run the drives self test routines.    Back it up before you do anything else, the next time it mounts may be the last (i've used a lot of very old drives from tivo's that were thrown out, you may or may not get it to mount again and may or may not be able to recover your' data).
>>
>> good luck.
>>
>> mad.scientist.at.large (a good madscientist)
>> --
>> God bless the rich, the greedy and the corrupt politicians they have put into office.   God bless them for helping me do the right thing by giving the rich my little pile of cash.  After all, the rich know what to do with money.
>>
>>
>> 30. Dec 2017 23:32 by >> thelma@sys-concept.com>> :
>>
>>
>>> I'm getting a strange error trying to boot my system.
>>>
>>> init id c5 response too fast disabled for 5 min
>>>
>>> the error appears right after when it to start mysql at boot.
>>> In addition when the system starts I see:
>>>
>>> ata4.00 failed command read DMA
>>>
>>> It is hart to post any information as I can not even boot the system.  I
>>> just took a video trying to see if I can read any relevant information.
>>> Though, I can boot strap the system via CD
>>>
>>> -- 
>>> Joseph

[-- Attachment #2: Type: text/html, Size: 4988 bytes --]

  reply	other threads:[~2017-12-31  7:45 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-12-31  6:32 [gentoo-user] init id c5 response too fast disabled for 5 min thelma
2017-12-31  7:22 ` mad.scientist.at.large
2017-12-31  7:28   ` thelma
2017-12-31  7:44     ` mad.scientist.at.large [this message]
     [not found]     ` <<9772164b-4c4e-7a5a-b377-6132c4d88755@sys-concept.com>
     [not found]       ` <L1fWwVt--3-0@tutanota.com-L1fX2Vc----0>
2017-12-31  7:52         ` mad.scientist.at.large
2017-12-31  8:26           ` thelma
2017-12-31 12:18     ` mad.scientist.at.large

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=L1fWwVt--3-0@tutanota.com \
    --to=mad.scientist.at.large@tutanota.com \
    --cc=gentoo-user@lists.gentoo.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox