* [gentoo-user] OT - Need help getting MythTV to work with new(er) kernel
@ 2006-03-13 19:38 Michael Sullivan
0 siblings, 0 replies; 3+ messages in thread
From: Michael Sullivan @ 2006-03-13 19:38 UTC (permalink / raw
To: gentoo-user
I had MythTV working perfectly with linux-2.6.14-gentoo-r5. I've tried
to upgrade to linux-2.6.15-gentoo-r1 using genkernel and basing the
newer kernel's configuration off of the older one. I've booted with the
new kernel, remerged ivtv and rebooted again with the new kernel, but
still I cannot watch LiveTV in mythfrontend. Here's the output of
mythbackend.log:
camille ~ # cat /var/log/mythtv/mythbackend.log
Starting up as the master server.
It is current (I stopped mythbackend, deleted the old mythbackend.log,
restarted syslog-ng and then mythbackend.) When I start mythfrontend
and ask to watch LiveTV, all I see is the blank screen. Here is the
output of running mythfrontend from my terminal:
michael@camille ~ $ mythfrontend
2006-03-13 13:30:34.209 New DB connection, total: 1
Total desktop width=1024, height=768, numscreens=1
2006-03-13 13:30:34.229 Using screen 0, 1024x768 at 0,0
2006-03-13 13:30:34.249 mythfrontend version: 0.18.1.20050510-1
www.mythtv.org
2006-03-13 13:30:34.250 Enabled verbose msgs : important general
2006-03-13 13:30:34.526 Switching to square mode (G.A.N.T.)
mythtv: could not connect to socket
mythtv: No such file or directory
lirc_init failed for mythtv, see preceding messages
2006-03-13 13:30:34.952 Joystick disabled.
2006-03-13 13:30:35.069 Registering Internal as a media playback plugin.
2006-03-13 13:30:40.671 New DB connection, total: 2
2006-03-13 13:30:40.710 Connecting to backend server: 192.168.1.3:6543
(try 1 of 5)
2006-03-13 13:30:40.733 Using protocol version 15
2006-03-13 13:30:40.890 Using protocol version 15
2006-03-13 13:30:46.209 taking too long to be allowed to read..
2006-03-13 13:30:51.213 taking too long to be allowed to read..
2006-03-13 13:31:00.218 Waited 4 seconds for data to become available,
waiting again...
2006-03-13 13:31:04.222 Waited 4 seconds for data to become available,
waiting again...
2006-03-13 13:31:08.226 Waited 4 seconds for data to become available,
waiting again...
2006-03-13 13:31:12.230 Waited 4 seconds for data to become available,
waiting again...
2006-03-13 13:31:16.234 Waited 4 seconds for data to become available,
waiting again...
2006-03-13 13:31:20.238 Waited 4 seconds for data to become available,
waiting again...
2006-03-13 13:31:24.242 Waited 4 seconds for data to become available,
waiting again...
2006-03-13 13:31:28.246 Waited 4 seconds for data to become available,
waiting again...
2006-03-13 13:31:28.247 Waited 14 seconds for data to become available,
aborting
Couldn't read file: rbuf://192.168.1.3:6543/mnt/store//ringbuf1.nuv
2006-03-13 13:31:28.303 Changing from None to WatchingLiveTV
2006-03-13 13:31:28.303 Decoder not alive, and trying to play..
2006-03-13 13:31:48.307 ReadStringList timeout (quick).
Remote encoder not responding.
2006-03-13 13:31:48.323 Changing from None to None
2006-03-13 13:31:58.483 ReadStringList timeout (quick).
2006-03-13 13:31:58.483 RemoteFile::Read(): No response from control
socket.
2006-03-13 13:31:58.483 RemoteFile::Read() failed in
RingBuffer::safe_read().
2006-03-13 13:31:58.495 WriteStringList: Bad socket
2006-03-13 13:31:58.495 ReadStringList: Bad socket
2006-03-13 13:31:58.495 Remote file timeout.
I see there:
mythtv: could not connect to socket
mythtv: No such file or directory
But mythbackend IS running; from another teminal tab I issue this:
camille ~ # ps ax | grep 'mythbackend'
12762 ? Ss 0:00 /usr/bin/mythbackend --verbose none
--logfile /var/log/mythtv/mythbackend.log
12766 ? S 0:00 /usr/bin/mythbackend --verbose none
--logfile /var/log/mythtv/mythbackend.log
12767 ? S 0:00 /usr/bin/mythbackend --verbose none
--logfile /var/log/mythtv/mythbackend.log
12769 ? S 0:00 /usr/bin/mythbackend --verbose none
--logfile /var/log/mythtv/mythbackend.log
12770 ? S 0:00 /usr/bin/mythbackend --verbose none
--logfile /var/log/mythtv/mythbackend.log
12771 ? S 0:00 /usr/bin/mythbackend --verbose none
--logfile /var/log/mythtv/mythbackend.log
12772 ? S 0:00 /usr/bin/mythbackend --verbose none
--logfile /var/log/mythtv/mythbackend.log
12773 ? S 0:00 /usr/bin/mythbackend --verbose none
--logfile /var/log/mythtv/mythbackend.log
12774 ? S 0:00 /usr/bin/mythbackend --verbose none
--logfile /var/log/mythtv/mythbackend.log
12775 ? S 0:00 /usr/bin/mythbackend --verbose none
--logfile /var/log/mythtv/mythbackend.log
12776 ? S 0:00 /usr/bin/mythbackend --verbose none
--logfile /var/log/mythtv/mythbackend.log
12777 ? S 0:00 /usr/bin/mythbackend --verbose none
--logfile /var/log/mythtv/mythbackend.log
12792 ? S 0:00 /usr/bin/mythbackend --verbose none
--logfile /var/log/mythtv/mythbackend.log
12793 ? S 0:00 /usr/bin/mythbackend --verbose none
--logfile /var/log/mythtv/mythbackend.log
12821 pts/1 S+ 0:00 grep mythbackend
camille ~ #
I would post the new kernel config, but since it's based off the old
kernel config, and the old one worked, I don't see the necessity. I
will post it if it would be helpful. Why is this not working? Have I
forgotten something?
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: [gentoo-user] OT - Need help getting MythTV to work with new(er) kernel
@ 2006-03-14 8:03 Rik van de Bovenkamp
2006-03-14 17:04 ` Michael Sullivan
0 siblings, 1 reply; 3+ messages in thread
From: Rik van de Bovenkamp @ 2006-03-14 8:03 UTC (permalink / raw
To: gentoo-user
Hi,
If you check dmesg, is everything OK loading ivtv?
You should see the ivtv messages between two ======== lines.
Using diff to compare the dmesg output for different kernels has led me to getting things to work.
When you do a ivtv-tune -f xxx.xx to set frequency.
After that cat /dev/video0 > test.mpg and you playback test.mpg is that OK (or you do mplayer /dev/video0)
-----Original Message-----
From: Michael Sullivan [mailto:michael@espersunited.com]
Sent: Monday, March 13, 2006 7:39 PM
To: gentoo-user
Subject: [gentoo-user] OT - Need help getting MythTV to work with new(er) kernel
I had MythTV working perfectly with linux-2.6.14-gentoo-r5. I've tried
to upgrade to linux-2.6.15-gentoo-r1 using genkernel and basing the
newer kernel's configuration off of the older one. I've booted with the
new kernel, remerged ivtv and rebooted again with the new kernel, but
still I cannot watch LiveTV in mythfrontend. Here's the output of
mythbackend.log:
camille ~ # cat /var/log/mythtv/mythbackend.log
Starting up as the master server.
It is current (I stopped mythbackend, deleted the old mythbackend.log,
restarted syslog-ng and then mythbackend.) When I start mythfrontend
and ask to watch LiveTV, all I see is the blank screen. Here is the
output of running mythfrontend from my terminal:
michael@camille ~ $ mythfrontend
2006-03-13 13:30:34.209 New DB connection, total: 1
Total desktop width=1024, height=768, numscreens=1
2006-03-13 13:30:34.229 Using screen 0, 1024x768 at 0,0
2006-03-13 13:30:34.249 mythfrontend version: 0.18.1.20050510-1
www.mythtv.org
2006-03-13 13:30:34.250 Enabled verbose msgs : important general
2006-03-13 13:30:34.526 Switching to square mode (G.A.N.T.)
mythtv: could not connect to socket
mythtv: No such file or directory
lirc_init failed for mythtv, see preceding messages
2006-03-13 13:30:34.952 Joystick disabled.
2006-03-13 13:30:35.069 Registering Internal as a media playback plugin.
2006-03-13 13:30:40.671 New DB connection, total: 2
2006-03-13 13:30:40.710 Connecting to backend server: 192.168.1.3:6543
(try 1 of 5)
2006-03-13 13:30:40.733 Using protocol version 15
2006-03-13 13:30:40.890 Using protocol version 15
2006-03-13 13:30:46.209 taking too long to be allowed to read..
2006-03-13 13:30:51.213 taking too long to be allowed to read..
2006-03-13 13:31:00.218 Waited 4 seconds for data to become available,
waiting again...
2006-03-13 13:31:04.222 Waited 4 seconds for data to become available,
waiting again...
2006-03-13 13:31:08.226 Waited 4 seconds for data to become available,
waiting again...
2006-03-13 13:31:12.230 Waited 4 seconds for data to become available,
waiting again...
2006-03-13 13:31:16.234 Waited 4 seconds for data to become available,
waiting again...
2006-03-13 13:31:20.238 Waited 4 seconds for data to become available,
waiting again...
2006-03-13 13:31:24.242 Waited 4 seconds for data to become available,
waiting again...
2006-03-13 13:31:28.246 Waited 4 seconds for data to become available,
waiting again...
2006-03-13 13:31:28.247 Waited 14 seconds for data to become available,
aborting
Couldn't read file: rbuf://192.168.1.3:6543/mnt/store//ringbuf1.nuv
2006-03-13 13:31:28.303 Changing from None to WatchingLiveTV
2006-03-13 13:31:28.303 Decoder not alive, and trying to play..
2006-03-13 13:31:48.307 ReadStringList timeout (quick).
Remote encoder not responding.
2006-03-13 13:31:48.323 Changing from None to None
2006-03-13 13:31:58.483 ReadStringList timeout (quick).
2006-03-13 13:31:58.483 RemoteFile::Read(): No response from control
socket.
2006-03-13 13:31:58.483 RemoteFile::Read() failed in
RingBuffer::safe_read().
2006-03-13 13:31:58.495 WriteStringList: Bad socket
2006-03-13 13:31:58.495 ReadStringList: Bad socket
2006-03-13 13:31:58.495 Remote file timeout.
I see there:
mythtv: could not connect to socket
mythtv: No such file or directory
But mythbackend IS running; from another teminal tab I issue this:
camille ~ # ps ax | grep 'mythbackend'
12762 ? Ss 0:00 /usr/bin/mythbackend --verbose none
--logfile /var/log/mythtv/mythbackend.log
12766 ? S 0:00 /usr/bin/mythbackend --verbose none
--logfile /var/log/mythtv/mythbackend.log
12767 ? S 0:00 /usr/bin/mythbackend --verbose none
--logfile /var/log/mythtv/mythbackend.log
12769 ? S 0:00 /usr/bin/mythbackend --verbose none
--logfile /var/log/mythtv/mythbackend.log
12770 ? S 0:00 /usr/bin/mythbackend --verbose none
--logfile /var/log/mythtv/mythbackend.log
12771 ? S 0:00 /usr/bin/mythbackend --verbose none
--logfile /var/log/mythtv/mythbackend.log
12772 ? S 0:00 /usr/bin/mythbackend --verbose none
--logfile /var/log/mythtv/mythbackend.log
12773 ? S 0:00 /usr/bin/mythbackend --verbose none
--logfile /var/log/mythtv/mythbackend.log
12774 ? S 0:00 /usr/bin/mythbackend --verbose none
--logfile /var/log/mythtv/mythbackend.log
12775 ? S 0:00 /usr/bin/mythbackend --verbose none
--logfile /var/log/mythtv/mythbackend.log
12776 ? S 0:00 /usr/bin/mythbackend --verbose none
--logfile /var/log/mythtv/mythbackend.log
12777 ? S 0:00 /usr/bin/mythbackend --verbose none
--logfile /var/log/mythtv/mythbackend.log
12792 ? S 0:00 /usr/bin/mythbackend --verbose none
--logfile /var/log/mythtv/mythbackend.log
12793 ? S 0:00 /usr/bin/mythbackend --verbose none
--logfile /var/log/mythtv/mythbackend.log
12821 pts/1 S+ 0:00 grep mythbackend
camille ~ #
I would post the new kernel config, but since it's based off the old
kernel config, and the old one worked, I don't see the necessity. I
will post it if it would be helpful. Why is this not working? Have I
forgotten something?
--
gentoo-user@gentoo.org mailing list
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 268.2.2/280 - Release Date: 3/13/2006
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: [gentoo-user] OT - Need help getting MythTV to work with new(er) kernel
2006-03-14 8:03 [gentoo-user] OT - Need help getting MythTV to work with new(er) kernel Rik van de Bovenkamp
@ 2006-03-14 17:04 ` Michael Sullivan
0 siblings, 0 replies; 3+ messages in thread
From: Michael Sullivan @ 2006-03-14 17:04 UTC (permalink / raw
To: gentoo-user
On Tue, 2006-03-14 at 09:03 +0100, Rik van de Bovenkamp wrote:
> Hi,
>
> If you check dmesg, is everything OK loading ivtv?
> You should see the ivtv messages between two ======== lines.
> Using diff to compare the dmesg output for different kernels has led me to getting things to work.
I booted with my old kernel and copied the ivtv stuff from dmesg into a
file. Here it is:
michael@camille ~ $ cat ivtv-2.6.14-r5
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.4.2 (tagged release) loading
ivtv: Linux version: 2.6.14-gentoo-r5 SMP 486 gcc-3.4
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected WinTV PVR 250 card (cx23416 based)
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 21 (level, low) -> IRQ 22
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
tveeprom: ivtv version
tveeprom: Hauppauge: model = 32552, rev = C168, serial# = 8059944
tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio processor = MSP4448 (type = 1b)
tveeprom: decoder processor = SAA7115 (type = 13)
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
saa7115 0-0021: ivtv driver
saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21]
msp3400 0-0040: ivtv driver
msp3400 0-0040: chip=MSP4448G-A2 +nicam +simple +simpler +radio
mode=simpler
ivtv0: i2c attach to card #0 ok [client=MSP4448G-A2, addr=40]
msp3400 0-0040: msp34xxg daemon started
tda9887 0-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB
total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB
total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
total)
ivtv0: Create encoder radio stream
tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #0
ivtv0: Initialized WinTV PVR 250, card #0
ivtv: ==================== END INIT IVTV ====================
michael@camille ~ $
Then I booted with the new kernel and did the same thing. Here it is:
michael@camille ~ $ cat ivtv-2.6.15-r1
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.4.2 (tagged release) loading
ivtv: Linux version: 2.6.15-gentoo-r1 SMP 486 gcc-3.4
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected WinTV PVR 250 card (cx23416 based)
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 21 (level, low) -> IRQ 22
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
tveeprom 0-0050: Hauppauge model 32552, rev C168, serial# 8059944
tveeprom 0-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47)
tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 0-0050: audio processor is MSP4448 (idx 27)
tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
tveeprom 0-0050: has radio, has no IR remote
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
ivtv0: Failed to load module saa7115
ivtv0 warning: i2c client addr: 0x21 not found for command 0x8004646b!
msp3400 0-0040: chip=MSP4448G-A2 +nicam +simple +simpler +radio
mode=simpler
ivtv0: i2c attach to card #0 ok [client=MSP4448G-A2, addr=40]
msp3400 0-0040: msp34xxg daemon started
tda9887 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB
total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB
total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
total)
ivtv0: Create encoder radio stream
tuner 0-0061: type set to 47 (LG NTSC (TAPE series))
ivtv0 warning: i2c client addr: 0x21 not found for command 0x40085618!
ivtv0 warning: i2c client addr: 0x21 not found for command 0xc0045627!
ivtv0 warning: i2c client addr: 0x21 not found for command 0x40085618!
ivtv0 warning: i2c client addr: 0x21 not found for command 0x40045613!
ivtv0 warning: i2c client addr: 0x21 not found for command 0x40045612!
ivtv0: Initialized WinTV PVR 250, card #0
ivtv: ==================== END INIT IVTV ====================
michael@camille ~ $
And here's the diff:
michael@camille ~ $ diff ivtv-2.6.14-r5 ivtv-2.6.15-r1
3c3
< ivtv: Linux version: 2.6.14-gentoo-r5 SMP 486 gcc-3.4
---
> ivtv: Linux version: 2.6.15-gentoo-r1 SMP 486 gcc-3.4
10,15d9
< tveeprom: ivtv version
< tveeprom: Hauppauge: model = 32552, rev = C168, serial# = 8059944
< tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47)
< tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
< tveeprom: audio processor = MSP4448 (type = 1b)
< tveeprom: decoder processor = SAA7115 (type = 13)
17c11,17
< tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
---
> tveeprom 0-0050: Hauppauge model 32552, rev C168, serial# 8059944
> tveeprom 0-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47)
> tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
> tveeprom 0-0050: audio processor is MSP4448 (idx 27)
> tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
> tveeprom 0-0050: has radio, has no IR remote
> tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
19,22c19,20
< saa7115 0-0021: ivtv driver
< saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
< ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21]
< msp3400 0-0040: ivtv driver
---
> ivtv0: Failed to load module saa7115
> ivtv0 warning: i2c client addr: 0x21 not found for command 0x8004646b!
26c24
< tda9887 0-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0)
---
> tda9887 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
35c33,38
< tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #0
---
> tuner 0-0061: type set to 47 (LG NTSC (TAPE series))
> ivtv0 warning: i2c client addr: 0x21 not found for command 0x40085618!
> ivtv0 warning: i2c client addr: 0x21 not found for command 0xc0045627!
> ivtv0 warning: i2c client addr: 0x21 not found for command 0x40085618!
> ivtv0 warning: i2c client addr: 0x21 not found for command 0x40045613!
> ivtv0 warning: i2c client addr: 0x21 not found for command 0x40045612!
michael@camille ~ $
As you can see, there was a failure to load module saa7115 and several
warnings about client addresses not being found, among other things. I
have no idea why these things are happening or how to fix them...
> When you do a ivtv-tune -f xxx.xx to set frequency.
camille ~ # ivtv-tune -f xxx.xx
/dev/video0: 0.000 MHz (Signal Detected)
> After that cat /dev/video0 > test.mpg and you playback test.mpg is that OK (or you do mplayer /dev/video0)
camille ~ # cat /dev/video0 > test.mpg
camille ~ # ls -lh test.mpg
-rw-r--r-- 1 root root 0 Mar 14 11:03 test.mpg
Nothing. What should I do now?
>
>
>
> -----Original Message-----
> From: Michael Sullivan [mailto:michael@espersunited.com]
> Sent: Monday, March 13, 2006 7:39 PM
> To: gentoo-user
> Subject: [gentoo-user] OT - Need help getting MythTV to work with new(er) kernel
>
> I had MythTV working perfectly with linux-2.6.14-gentoo-r5. I've tried
> to upgrade to linux-2.6.15-gentoo-r1 using genkernel and basing the
> newer kernel's configuration off of the older one. I've booted with the
> new kernel, remerged ivtv and rebooted again with the new kernel, but
> still I cannot watch LiveTV in mythfrontend. Here's the output of
> mythbackend.log:
>
> camille ~ # cat /var/log/mythtv/mythbackend.log
> Starting up as the master server.
>
> It is current (I stopped mythbackend, deleted the old mythbackend.log,
> restarted syslog-ng and then mythbackend.) When I start mythfrontend
> and ask to watch LiveTV, all I see is the blank screen. Here is the
> output of running mythfrontend from my terminal:
>
> michael@camille ~ $ mythfrontend
> 2006-03-13 13:30:34.209 New DB connection, total: 1
> Total desktop width=1024, height=768, numscreens=1
> 2006-03-13 13:30:34.229 Using screen 0, 1024x768 at 0,0
> 2006-03-13 13:30:34.249 mythfrontend version: 0.18.1.20050510-1
> www.mythtv.org
> 2006-03-13 13:30:34.250 Enabled verbose msgs : important general
> 2006-03-13 13:30:34.526 Switching to square mode (G.A.N.T.)
> mythtv: could not connect to socket
> mythtv: No such file or directory
> lirc_init failed for mythtv, see preceding messages
> 2006-03-13 13:30:34.952 Joystick disabled.
> 2006-03-13 13:30:35.069 Registering Internal as a media playback plugin.
> 2006-03-13 13:30:40.671 New DB connection, total: 2
> 2006-03-13 13:30:40.710 Connecting to backend server: 192.168.1.3:6543
> (try 1 of 5)
> 2006-03-13 13:30:40.733 Using protocol version 15
> 2006-03-13 13:30:40.890 Using protocol version 15
> 2006-03-13 13:30:46.209 taking too long to be allowed to read..
> 2006-03-13 13:30:51.213 taking too long to be allowed to read..
> 2006-03-13 13:31:00.218 Waited 4 seconds for data to become available,
> waiting again...
> 2006-03-13 13:31:04.222 Waited 4 seconds for data to become available,
> waiting again...
> 2006-03-13 13:31:08.226 Waited 4 seconds for data to become available,
> waiting again...
> 2006-03-13 13:31:12.230 Waited 4 seconds for data to become available,
> waiting again...
> 2006-03-13 13:31:16.234 Waited 4 seconds for data to become available,
> waiting again...
> 2006-03-13 13:31:20.238 Waited 4 seconds for data to become available,
> waiting again...
> 2006-03-13 13:31:24.242 Waited 4 seconds for data to become available,
> waiting again...
> 2006-03-13 13:31:28.246 Waited 4 seconds for data to become available,
> waiting again...
> 2006-03-13 13:31:28.247 Waited 14 seconds for data to become available,
> aborting
> Couldn't read file: rbuf://192.168.1.3:6543/mnt/store//ringbuf1.nuv
> 2006-03-13 13:31:28.303 Changing from None to WatchingLiveTV
> 2006-03-13 13:31:28.303 Decoder not alive, and trying to play..
> 2006-03-13 13:31:48.307 ReadStringList timeout (quick).
> Remote encoder not responding.
> 2006-03-13 13:31:48.323 Changing from None to None
> 2006-03-13 13:31:58.483 ReadStringList timeout (quick).
> 2006-03-13 13:31:58.483 RemoteFile::Read(): No response from control
> socket.
> 2006-03-13 13:31:58.483 RemoteFile::Read() failed in
> RingBuffer::safe_read().
> 2006-03-13 13:31:58.495 WriteStringList: Bad socket
> 2006-03-13 13:31:58.495 ReadStringList: Bad socket
> 2006-03-13 13:31:58.495 Remote file timeout.
>
>
>
> I see there:
>
> mythtv: could not connect to socket
> mythtv: No such file or directory
>
> But mythbackend IS running; from another teminal tab I issue this:
>
> camille ~ # ps ax | grep 'mythbackend'
> 12762 ? Ss 0:00 /usr/bin/mythbackend --verbose none
> --logfile /var/log/mythtv/mythbackend.log
> 12766 ? S 0:00 /usr/bin/mythbackend --verbose none
> --logfile /var/log/mythtv/mythbackend.log
> 12767 ? S 0:00 /usr/bin/mythbackend --verbose none
> --logfile /var/log/mythtv/mythbackend.log
> 12769 ? S 0:00 /usr/bin/mythbackend --verbose none
> --logfile /var/log/mythtv/mythbackend.log
> 12770 ? S 0:00 /usr/bin/mythbackend --verbose none
> --logfile /var/log/mythtv/mythbackend.log
> 12771 ? S 0:00 /usr/bin/mythbackend --verbose none
> --logfile /var/log/mythtv/mythbackend.log
> 12772 ? S 0:00 /usr/bin/mythbackend --verbose none
> --logfile /var/log/mythtv/mythbackend.log
> 12773 ? S 0:00 /usr/bin/mythbackend --verbose none
> --logfile /var/log/mythtv/mythbackend.log
> 12774 ? S 0:00 /usr/bin/mythbackend --verbose none
> --logfile /var/log/mythtv/mythbackend.log
> 12775 ? S 0:00 /usr/bin/mythbackend --verbose none
> --logfile /var/log/mythtv/mythbackend.log
> 12776 ? S 0:00 /usr/bin/mythbackend --verbose none
> --logfile /var/log/mythtv/mythbackend.log
> 12777 ? S 0:00 /usr/bin/mythbackend --verbose none
> --logfile /var/log/mythtv/mythbackend.log
> 12792 ? S 0:00 /usr/bin/mythbackend --verbose none
> --logfile /var/log/mythtv/mythbackend.log
> 12793 ? S 0:00 /usr/bin/mythbackend --verbose none
> --logfile /var/log/mythtv/mythbackend.log
> 12821 pts/1 S+ 0:00 grep mythbackend
> camille ~ #
>
> I would post the new kernel config, but since it's based off the old
> kernel config, and the old one worked, I don't see the necessity. I
> will post it if it would be helpful. Why is this not working? Have I
> forgotten something?
>
>
>
> --
> gentoo-user@gentoo.org mailing list
>
> --
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.1.375 / Virus Database: 268.2.2/280 - Release Date: 3/13/2006
>
>
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2006-03-14 17:11 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-03-14 8:03 [gentoo-user] OT - Need help getting MythTV to work with new(er) kernel Rik van de Bovenkamp
2006-03-14 17:04 ` Michael Sullivan
-- strict thread matches above, loose matches on Subject: below --
2006-03-13 19:38 Michael Sullivan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox