Dne st 13. 12. 2023 21:05 uživatel <stefan11111@shitposting.expert> napsal:

> On 2023-12-13 19:58, Vít Smolík wrote:
> > Dne st 13. 12. 2023 20:45 uživatel <stefan11111@shitposting.expert>
> > napsal:
> >
> >> On 2023-12-13 19:35, Vít Smolík wrote:
> >> > Dne st 13. 12. 2023 20:30 uživatel <stefan11111@shitposting.expert>
> >> > napsal:
> >> >
> >> >> On 2023-12-13 19:21, Vít Smolík wrote:
> >> >> > st 13. 12. 2023 v 19:51 odesílatel <stefan11111@shitposting.expert
> >
> >> >> > napsal:
> >> >> >>
> >> >> >> On 2023-12-13 18:46, stefan11111@shitposting.expert wrote:
> >> >> >> > On 2023-12-13 16:23, Vít Smolík wrote:
> >> >> >> >> st 13. 12. 2023 v 16:58 odesílatel
> <stefan11111@shitposting.expert
> >> >
> >> >> >> >> napsal:
> >> >> >> >>>
> >> >> >> >>> On 2023-12-13 14:55, Vít Smolík wrote:
> >> >> >> >>> > st 13. 12. 2023 v 9:28 odesílatel
> >> <stefan11111@shitposting.expert
> >> >> >
> >> >> >> >>> > napsal:
> >> >> >> >>> >>
> >> >> >> >>> >> On 2023-12-13 05:34, Vít Smolík wrote:
> >> >> >> >>> >> > okay, then dont worry about this.
> >> >> >> >>> >> > chceck the xorg log it should be in /var/log/Xorg.<some
> >> >> number>.log.
> >> >> >> >>> >> > also check if both the nvidia and intel drivers are
> loaded
> >> >> correctly.
> >> >> >> >>> >> >
> >> >> >> >>> >> > May the Force be with you,
> >> >> >> >>> >> > Vít Smolík.
> >> >> >> >>> >> >
> >> >> >> >>> >>
> >> >> >> >>> >> I added the Xorg.0.log from optimus as an attachment.
> >> >> >> >>> > okay, i checked and i saw these lines:
> >> >> >> >>> >
> >> >> >> >>> >> [ 32496.682] (**) modeset(1): claimed PCI slot 0@0:2:0
> >> >> >> >>> >> [ 32496.682] (II) modeset(1): using default device
> >> >> >> >>> >> [ 32496.682] (EE) Screen 1 deleted because of no matching
> >> config
> >> >> >> >>> >> section.
> >> >> >> >>> >> [ 32496.682] (II) UnloadModule: "modesetting"
> >> >> >> >>> >
> >> >> >> >>> > i think the third line from this citation may be the
> concern,
> >> make
> >> >> >> >>> > sure you installed the proprietary nvidia drivers, and
> disabled
> >> >> >> >>> > nouveau (pretty sure you already did that)
> >> >> >> >>> > could you send your xorg.conf? it seems to me that the
> config
> >> that
> >> >> >> >>> > nvidia-xconfig made is faulty.
> >> >> >> >>> >
> >> >> >> >>> > --
> >> >> >> >>> > May the Force be with you,
> >> >> >> >>> > Vít Smolík.
> >> >> >> >>> I added my xorg.conf as an attachment
> >> >> >> >> okay, try adding this line right after the "Device" line in the
> >> >> >> >> "Screen" section:
> >> >> >> >>
> >> >> >> >> GPUDevice         "InactiveDevice1"
> >> >> >> >>
> >> >> >> >> The config should then look like this:
> >> >> >> >>
> >> >> >> >>> Section "Screen"
> >> >> >> >>>     Identifier     "Screen0"
> >> >> >> >>>     Device         "Device0"
> >> >> >> >>>     GPUDevice         "InactiveDevice1"
> >> >> >> >>>     Monitor        "Monitor0"
> >> >> >> >>>     DefaultDepth    24
> >> >> >> >>>     Option         "AllowEmptyInitialConfiguration" "True"
> >> >> >> >>>     SubSection     "Display"
> >> >> >> >>>         Depth       24
> >> >> >> >>>     EndSubSection
> >> >> >> >>> EndSection
> >> >> >> >> (i don't know how the formating will look in this email, but
> the
> >> >> >> >> "GPUDevice" line will be indented the same as the "Device"
> line)
> >> >> >> >>
> >> >> >> >> after that, save the config file and start X
> >> >> >> > Doing this did have an effect, but not the desired effect.
> >> >> >> > I still don't see xorg's display on the laptop screen, but if I
> >> >> >> > connect an hdmi cable to the laptop, I get output on an external
> >> >> >> > monitor.
> >> >> >> Good news, proton works.
> >> >> >> I don't get sound with proton though, but that is a known issues
> with
> >> >> >> steam's runtime that can be fixed.
> >> >> >> Thanks for helping me so far. Maybe I can even get the display to
> >> work
> >> >> >> on the laptop's screen.
> >> >> >>
> >> >> > i think the fix for your problem will be adding the second monitor
> to
> >> >> > the xorg.conf, you only have 1 monitor configured.
> >> >> > would you mind sending me your original xorg config if you still
> have
> >> >> > it?
> >> >> >
> >> >>
> >> >> The xorg config I sent is the only one I had on this laptop.
> >> >> Before trying this, I didn't have an xorg config on this laptop.
> >> >>
> >> >> > also try running xrandr (after starting X), then see all of the
> >> >> > outputs and add something like this to your X config
> >> >> >>
> >> >> >> Section "Monitor"
> >> >> >>     Identifier     "THE THING XRANDR OUTPUTS"
> >> >> >>     Option         "DPMS"
> >> >> >> EndSection
> >> >> >
> >> >> > the xrandr output should look something like this:
> >> >> >> Screen 0: minimum 320 x 200, current 3200 x 1080, maximum 8192 x
> 8192
> >> >> >> VGA-1 disconnected (normal left inverted right x axis y axis)
> >> >> >> HDMI-1 connected primary 1920x1080+0+0 (normal left inverted
> right x
> >> >> >> axis y axis) 531mm x 299mm
> >> >> >>    1920x1080     59.93 +  60.00*   50.00    59.94
> >> >> >>    1920x1080i    60.00    50.00    59.94
> >> >> >>    1680x1050     59.88
> >> >> >> …
> >> >> >
> >> >> > if you can't figure it out, send the output, i will help you write
> the
> >> >> > config ;D
> >> >> This is the output of xrandr:
> >> >>
> >> >> $ xrandr
> >> >> Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
> >> >> HDMI-0 connected primary 1920x1080+0+0 (normal left inverted right x
> >> >> axis y axis) 698mm x 392mm
> >> >>     1920x1080     60.00*+  60.00    59.94    50.00
> >> >>     1680x1050     59.95
> >> >>     1600x900      60.00
> >> >>     1440x900      59.89
> >> >>     1440x576      50.00
> >> >>     1400x1050     59.98
> >> >>     1280x1024     60.02
> >> >>     1280x800      59.81
> >> >>     1280x720      60.00    59.96    50.00
> >> >>     1024x768      60.00
> >> >>     800x600       60.32    56.25
> >> >>     720x576       50.00
> >> >>     720x480       59.94
> >> >>     640x480       59.94
> >> >>
> >> > add this to your config:
> >> >
> >> > Section "Monitor"
> >> >    Identifier "HDMI-0"
> >> >    Option "DPMS"
> >> > EndSection
> >> >
> >> > Make sure the indentation is correct, see the rest of the config file,
> >> > and
> >> > indent the same as in the other sections.
> >> >
> >> > if it doesn't work, in the next email, include your xorg.conf and the
> >> > xorg
> >> > log
> >> >
> >> >
> >> > May the Force be with you,
> >> > Vít Smolík.
> >>
> >> Tried it, didn't work.
> >> I added the config file and the log as attachments.
> >>
> > Added the modified config as an attachment, i configured another screen
> > section at the bottom of the config, its identifier is "Screen1", also
> > added it to the server layout on top of the config.
> >
> > rename your old xorg.conf and download this, then restart X, and report
> > if
> > it was successfull :)
> >
> > May the Force be with you,
> > Vít Smolík.
>
> Still no luck.
>
could you send your "xrandr" output? (you need to start X to run it) and
your X log?

>