* [gentoo-user] wicd
@ 2011-12-25 18:01 Michael Mol
2011-12-26 10:19 ` Fernando Antunes
0 siblings, 1 reply; 3+ messages in thread
From: Michael Mol @ 2011-12-25 18:01 UTC (permalink / raw
To: gentoo-user
So, after having plenty of trouble working on getting Gentoo set up to
work with my new laptop, I'm finally able to run 'iwlist wlan0 scan'
and see the 15 or so cells in immediate area.
Rather than going straight wpa_supplicant or using NetworkManager on
this machine, I thought I'd give wicd a try. Trouble is, wicd, for
whatever reason, isn't seeing any any of the cells. If I run "wicd-cli
--wireless -l", I get a list's headers, but no observed networks. If I
run "wicd-cli --wireless -S", I get no output at all.
The page on gentoo-wiki.com for wicd[1] talks about a few
configuration files for manual configuration, but those aren't present
on the filesystem, and there are no manpages for them.
[1] http://en.gentoo-wiki.com/wiki/Wicd#Manual_Configuration
--
:wq
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [gentoo-user] wicd
2011-12-25 18:01 [gentoo-user] wicd Michael Mol
@ 2011-12-26 10:19 ` Fernando Antunes
2011-12-26 10:20 ` Fernando Antunes
0 siblings, 1 reply; 3+ messages in thread
From: Fernando Antunes @ 2011-12-26 10:19 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 1053 bytes --]
On Sun, Dec 25, 2011 at 4:01 PM, Michael Mol <mikemol@gmail.com> wrote:
> So, after having plenty of trouble working on getting Gentoo set up to
> work with my new laptop, I'm finally able to run 'iwlist wlan0 scan'
> and see the 15 or so cells in immediate area.
>
> Rather than going straight wpa_supplicant or using NetworkManager on
> this machine, I thought I'd give wicd a try. Trouble is, wicd, for
> whatever reason, isn't seeing any any of the cells. If I run "wicd-cli
> --wireless -l", I get a list's headers, but no observed networks. If I
> run "wicd-cli --wireless -S", I get no output at all.
>
> The page on gentoo-wiki.com for wicd[1] talks about a few
> configuration files for manual configuration, but those aren't present
> on the filesystem, and there are no manpages for them.
>
>
> [1] http://en.gentoo-wiki.com/wiki/Wicd#Manual_Configuration
> --
>
As far I can remeber, I just removed net.ethX from /etc/init.d and ran
rc-confg add wicd boot.
Inside wicd preference I set wlan0 and eth0 as my network interfaces.
:wq
>
>
[-- Attachment #2: Type: text/html, Size: 1812 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [gentoo-user] wicd
2011-12-26 10:19 ` Fernando Antunes
@ 2011-12-26 10:20 ` Fernando Antunes
0 siblings, 0 replies; 3+ messages in thread
From: Fernando Antunes @ 2011-12-26 10:20 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 1790 bytes --]
On Mon, Dec 26, 2011 at 8:19 AM, Fernando Antunes <fs.antunes@gmail.com>wrote:
>
>
> On Sun, Dec 25, 2011 at 4:01 PM, Michael Mol <mikemol@gmail.com> wrote:
>
>> So, after having plenty of trouble working on getting Gentoo set up to
>> work with my new laptop, I'm finally able to run 'iwlist wlan0 scan'
>> and see the 15 or so cells in immediate area.
>>
>> Rather than going straight wpa_supplicant or using NetworkManager on
>> this machine, I thought I'd give wicd a try. Trouble is, wicd, for
>> whatever reason, isn't seeing any any of the cells. If I run "wicd-cli
>> --wireless -l", I get a list's headers, but no observed networks. If I
>> run "wicd-cli --wireless -S", I get no output at all.
>>
>> The page on gentoo-wiki.com for wicd[1] talks about a few
>> configuration files for manual configuration, but those aren't present
>> on the filesystem, and there are no manpages for them.
>>
>> [1] http://en.gentoo-wiki.com/wiki/Wicd#Manual_Configuration
>> --
>>
>
> As far I can remeber, I just removed net.ethX from /etc/init.d and ran
> rc-confg add wicd boot.
>
> Inside wicd preference I set wlan0 and eth0 as my network interfaces.
>
> My emerge packages that came with wicd :
Calculating dependencies... done!
[ebuild N ] dev-libs/libnl-1.1-r2 USE="-doc" 283 kB
[ebuild N ] dev-python/notify-python-0.1.1-r1 210 kB
[ebuild N ] dev-python/dbus-python-0.83.2 USE="-doc -examples -test"
528 kB
[ebuild N ] net-wireless/wpa_supplicant-0.7.3-r2 USE="dbus gnutls
readline ssl -debug -eap-sim -fasteap -madwifi (-ps3) -qt4 -wimax -wps"
1,600 kB
[ebuild N ] dev-python/urwid-0.9.9.1 USE="-examples" 233 kB
[ebuild N ] x11-misc/ktsuss-1.4 273 kB
[ebuild N ] net-misc/wicd-1.7.0 USE="X gtk libnotify ncurses nls
pm-utils (-i
>
> :wq
>>
>>
>
[-- Attachment #2: Type: text/html, Size: 3031 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2011-12-26 10:22 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-12-25 18:01 [gentoo-user] wicd Michael Mol
2011-12-26 10:19 ` Fernando Antunes
2011-12-26 10:20 ` Fernando Antunes
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox