* [gentoo-user] Problems with KDE & Flash after moving to dual adapter
@ 2011-08-31 23:23 Mark Knecht
2011-09-02 16:21 ` [gentoo-user] " Mark Knecht
0 siblings, 1 reply; 2+ messages in thread
From: Mark Knecht @ 2011-08-31 23:23 UTC (permalink / raw
To: Gentoo User
Hi,
I'm wondering what experience (and hopefully guidance) others can
provide to hopefully fix these new problems on my compute server.
Thanks in advance.
OK, yesterday I added a second NVidia adapter to my machine and
used nvidia-settings to create a new xorg.conf file. (Both new and old
are shown at the end) The new setup came up easily and I now have 3
monitors. Here's the setup:
GTX 465 port 0 -> GPU-0 + DFP-0
GTX 465 port 1 -> GPU-0 + DFP-2
8400GS port 0 -> GPU-1 + CRT-1
To get this working I had to enable the xinerama use flag as well
as enable Xinerama in xorg.conf.
Some simple tests of functionality:
1) glxgears is functional on all 3 displays but only draws actual
graphics on the two GTX465 monitors. It draws a black window on the
8400GS. It is my understanding that this is expected.
2) Both Virtualbox and VMWare VM's work fine on all 3 monitors. If the
VMs are running Windows then Flash, Java & Silverlight seem to work
fine on any display. I can play NetFlix movies and run other Windows
apps from within the VMs without any major problems so far.
Problems:
1) Adobe flash within Linux is not working at some websites, such as:
http://www.jigsawdoku.com/
For this page the flash game area is just gray. Flash does however
seem to work on other sites like Adobe's web site so possibly this is
more an issue with that page but I've seen a couple of others so far
that do the same thing.
2) Two KDE features that I like quite a lot are not working at all:
a) F8 - display all desktops doesn't work. With the original 2
monitors the feature worked fine.
b) The upper left corner 'display all apps' feature is not working.
I've been Googling around without any luck in terms of finding
things to try in terms of fixing this, or even discovering that maybe
these things simply don't work with two adapters. Maybe there are some
accelerations or features I need to enable that nvidia-settings don't
do for me? I don't know.
Note that in the older 2 monitor configuration I was using Twinview
which treats the two monitors as a single large monitor.
Thanks in advance for any ideas about how to get this working at its best.
Cheers,
Mark
[New 3 monitor xorg.conf]
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 275.09.07
(buildmeister@swio-display-x86-rhel47-03.nvidia.com) Wed Jun 8
14:38:19 PDT 2011
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
Screen 2 "Screen2" RightOf "Screen1"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "1"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from data in "/etc/conf.d/gpm"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor1"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 75.0
VertRefresh 56.0 - 61.0
Option "DPMS"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 75.0
VertRefresh 56.0 - 61.0
Option "DPMS"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor2"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 465"
BusID "PCI:2:0:0"
Screen 1
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 465"
BusID "PCI:2:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Device2"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8400GS"
BusID "PCI:4:0:0"
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "DFP-2: 1920x1080 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "DFP-0: 1920x1080 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen2"
Device "Device2"
Monitor "Monitor2"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "1280x1024 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
[Previous 2 monitor xorg.conf]
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 270.18
(buildmeister@swio-display-x86-rhel47-08.nvidia.com) Tue Jan 18
22:06:28 PST 2011
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from data in "/etc/conf.d/gpm"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "TwinView"
Option "MetaModes" "1920x1080,1920x1080; 1920x1080"
Option "TwinViewOrientation" "RightOf"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
^ permalink raw reply [flat|nested] 2+ messages in thread
* [gentoo-user] Re: Problems with KDE & Flash after moving to dual adapter
2011-08-31 23:23 [gentoo-user] Problems with KDE & Flash after moving to dual adapter Mark Knecht
@ 2011-09-02 16:21 ` Mark Knecht
0 siblings, 0 replies; 2+ messages in thread
From: Mark Knecht @ 2011-09-02 16:21 UTC (permalink / raw
To: Gentoo User
Anyone?
Thanks,
Mark
On Wed, Aug 31, 2011 at 4:23 PM, Mark Knecht <markknecht@gmail.com> wrote:
> Hi,
> I'm wondering what experience (and hopefully guidance) others can
> provide to hopefully fix these new problems on my compute server.
> Thanks in advance.
>
> OK, yesterday I added a second NVidia adapter to my machine and
> used nvidia-settings to create a new xorg.conf file. (Both new and old
> are shown at the end) The new setup came up easily and I now have 3
> monitors. Here's the setup:
>
> GTX 465 port 0 -> GPU-0 + DFP-0
> GTX 465 port 1 -> GPU-0 + DFP-2
>
> 8400GS port 0 -> GPU-1 + CRT-1
>
> To get this working I had to enable the xinerama use flag as well
> as enable Xinerama in xorg.conf.
>
> Some simple tests of functionality:
>
> 1) glxgears is functional on all 3 displays but only draws actual
> graphics on the two GTX465 monitors. It draws a black window on the
> 8400GS. It is my understanding that this is expected.
>
> 2) Both Virtualbox and VMWare VM's work fine on all 3 monitors. If the
> VMs are running Windows then Flash, Java & Silverlight seem to work
> fine on any display. I can play NetFlix movies and run other Windows
> apps from within the VMs without any major problems so far.
>
> Problems:
>
> 1) Adobe flash within Linux is not working at some websites, such as:
>
> http://www.jigsawdoku.com/
>
> For this page the flash game area is just gray. Flash does however
> seem to work on other sites like Adobe's web site so possibly this is
> more an issue with that page but I've seen a couple of others so far
> that do the same thing.
>
>
> 2) Two KDE features that I like quite a lot are not working at all:
>
> a) F8 - display all desktops doesn't work. With the original 2
> monitors the feature worked fine.
>
> b) The upper left corner 'display all apps' feature is not working.
>
> I've been Googling around without any luck in terms of finding
> things to try in terms of fixing this, or even discovering that maybe
> these things simply don't work with two adapters. Maybe there are some
> accelerations or features I need to enable that nvidia-settings don't
> do for me? I don't know.
>
> Note that in the older 2 monitor configuration I was using Twinview
> which treats the two monitors as a single large monitor.
>
> Thanks in advance for any ideas about how to get this working at its best.
>
> Cheers,
> Mark
>
>
> [New 3 monitor xorg.conf]
>
> # nvidia-settings: X configuration file generated by nvidia-settings
> # nvidia-settings: version 275.09.07
> (buildmeister@swio-display-x86-rhel47-03.nvidia.com) Wed Jun 8
> 14:38:19 PDT 2011
>
> Section "ServerLayout"
> Identifier "Layout0"
> Screen 0 "Screen0" 0 0
> Screen 1 "Screen1" RightOf "Screen0"
> Screen 2 "Screen2" RightOf "Screen1"
> InputDevice "Keyboard0" "CoreKeyboard"
> InputDevice "Mouse0" "CorePointer"
> Option "Xinerama" "1"
> EndSection
>
> Section "Files"
> EndSection
>
> Section "InputDevice"
> # generated from data in "/etc/conf.d/gpm"
> Identifier "Mouse0"
> Driver "mouse"
> Option "Protocol"
> Option "Device" "/dev/input/mice"
> Option "Emulate3Buttons" "no"
> Option "ZAxisMapping" "4 5"
> EndSection
>
> Section "InputDevice"
> # generated from default
> Identifier "Keyboard0"
> Driver "kbd"
> EndSection
>
> Section "Monitor"
> # HorizSync source: edid, VertRefresh source: edid
> Identifier "Monitor1"
> VendorName "Unknown"
> ModelName "Samsung SyncMaster"
> HorizSync 30.0 - 75.0
> VertRefresh 56.0 - 61.0
> Option "DPMS"
> EndSection
>
> Section "Monitor"
> # HorizSync source: edid, VertRefresh source: edid
> Identifier "Monitor0"
> VendorName "Unknown"
> ModelName "Samsung SyncMaster"
> HorizSync 30.0 - 75.0
> VertRefresh 56.0 - 61.0
> Option "DPMS"
> EndSection
>
> Section "Monitor"
> # HorizSync source: edid, VertRefresh source: edid
> Identifier "Monitor2"
> VendorName "Unknown"
> ModelName "Samsung SyncMaster"
> HorizSync 30.0 - 81.0
> VertRefresh 56.0 - 75.0
> Option "DPMS"
> EndSection
>
> Section "Device"
> Identifier "Device1"
> Driver "nvidia"
> VendorName "NVIDIA Corporation"
> BoardName "GeForce GTX 465"
> BusID "PCI:2:0:0"
> Screen 1
> EndSection
>
> Section "Device"
> Identifier "Device0"
> Driver "nvidia"
> VendorName "NVIDIA Corporation"
> BoardName "GeForce GTX 465"
> BusID "PCI:2:0:0"
> Screen 0
> EndSection
>
> Section "Device"
> Identifier "Device2"
> Driver "nvidia"
> VendorName "NVIDIA Corporation"
> BoardName "GeForce 8400GS"
> BusID "PCI:4:0:0"
> EndSection
>
> Section "Screen"
> Identifier "Screen1"
> Device "Device1"
> Monitor "Monitor1"
> DefaultDepth 24
> Option "TwinView" "0"
> Option "metamodes" "DFP-2: 1920x1080 +0+0"
> SubSection "Display"
> Depth 24
> EndSubSection
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> Device "Device0"
> Monitor "Monitor0"
> DefaultDepth 24
> Option "TwinView" "0"
> Option "metamodes" "DFP-0: 1920x1080 +0+0"
> SubSection "Display"
> Depth 24
> EndSubSection
> EndSection
>
> Section "Screen"
> Identifier "Screen2"
> Device "Device2"
> Monitor "Monitor2"
> DefaultDepth 24
> Option "TwinView" "0"
> Option "metamodes" "1280x1024 +0+0"
> SubSection "Display"
> Depth 24
> EndSubSection
> EndSection
>
>
>
> [Previous 2 monitor xorg.conf]
>
> # nvidia-xconfig: X configuration file generated by nvidia-xconfig
> # nvidia-xconfig: version 270.18
> (buildmeister@swio-display-x86-rhel47-08.nvidia.com) Tue Jan 18
> 22:06:28 PST 2011
>
> Section "ServerLayout"
> Identifier "Layout0"
> Screen 0 "Screen0"
> InputDevice "Keyboard0" "CoreKeyboard"
> InputDevice "Mouse0" "CorePointer"
> EndSection
>
> Section "Files"
> EndSection
>
> Section "InputDevice"
> # generated from data in "/etc/conf.d/gpm"
> Identifier "Mouse0"
> Driver "mouse"
> Option "Protocol"
> Option "Device" "/dev/input/mice"
> Option "Emulate3Buttons" "no"
> Option "ZAxisMapping" "4 5"
> EndSection
>
> Section "InputDevice"
> # generated from default
> Identifier "Keyboard0"
> Driver "kbd"
> EndSection
>
> Section "Monitor"
> Identifier "Monitor0"
> VendorName "Unknown"
> ModelName "Unknown"
> HorizSync 28.0 - 33.0
> VertRefresh 43.0 - 72.0
> Option "DPMS"
> EndSection
>
> Section "Device"
> Identifier "Device0"
> Driver "nvidia"
> VendorName "NVIDIA Corporation"
> Option "TwinView"
> Option "MetaModes" "1920x1080,1920x1080; 1920x1080"
> Option "TwinViewOrientation" "RightOf"
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> Device "Device0"
> Monitor "Monitor0"
> DefaultDepth 24
> SubSection "Display"
> Depth 24
> EndSubSection
> EndSection
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2011-09-02 16:31 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-08-31 23:23 [gentoo-user] Problems with KDE & Flash after moving to dual adapter Mark Knecht
2011-09-02 16:21 ` [gentoo-user] " Mark Knecht
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox