P.S.: here is the output of "lspci -k" 00:00.0 Host bridge: Intel Corporation ValleyView SSA-CUnit (rev 0c) Subsystem: Biostar Microtech Int'l Corp Device 1111 00:02.0 VGA compatible controller: Intel Corporation ValleyView Gen7 (rev 0c) Subsystem: Biostar Microtech Int'l Corp Device 1111 Kernel driver in use: i915 00:13.0 IDE interface: Intel Corporation ValleyView 4-Port SATA Storage Controller (rev 0c) Subsystem: Biostar Microtech Int'l Corp Device 521d Kernel driver in use: ata_piix 00:14.0 USB controller: Intel Corporation ValleyView USB xHCI Host Controller (rev 0c) Subsystem: Biostar Microtech Int'l Corp Device 6403 Kernel driver in use: xhci_hcd 00:1a.0 Encryption controller: Intel Corporation ValleyView SEC (rev 0c) Subsystem: Biostar Microtech Int'l Corp Device 310e 00:1b.0 Audio device: Intel Corporation ValleyView High Definition Audio Controller (rev 0c) Subsystem: Biostar Microtech Int'l Corp Device 821e Kernel modules: snd_hda_intel 00:1c.0 PCI bridge: Intel Corporation ValleyView PCI Express Root Port (rev 0c) Kernel driver in use: pcieport 00:1c.1 PCI bridge: Intel Corporation ValleyView PCI Express Root Port (rev 0c) Kernel driver in use: pcieport 00:1c.2 PCI bridge: Intel Corporation ValleyView PCI Express Root Port (rev 0c) Kernel driver in use: pcieport 00:1c.3 PCI bridge: Intel Corporation ValleyView PCI Express Root Port (rev 0c) Kernel driver in use: pcieport 00:1f.0 ISA bridge: Intel Corporation ValleyView Power Control Unit (rev 0c) Subsystem: Biostar Microtech Int'l Corp Device 310e 00:1f.3 SMBus: Intel Corporation ValleyView SMBus Controller (rev 0c) Subsystem: Biostar Microtech Int'l Corp Device 310e Kernel modules: i2c_i801 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c) Subsystem: Device 1c6c:0123 Kernel driver in use: r8169 Thanks again, Francisco 2014-06-11 8:28 GMT-03:00 Francisco Ares : > Hi, > > I am trying to install Gentoo on a x64 system with such processor, that, > as far as I could understand, is like to have the chipset embedded, so the > buses to video, pci express, usb, etc, comes out of the processor chip. > > The kernel from the 3.10 series were not able to correctly handle this > processor, at least the video driver (not sure about the rest), but the new > stable one, "gento-sources-3.12.21-r1" is OK, now I have the framebuffer > splash. > > But no X11 for now. I have added "~amd64" keywords to > "x11-drivers/xf86-video-intel", but, for now, only a black screen, with no > clue on the log file "/var/log/Xorg.0.log" (which is the latest). > > On "/etc/portage/make.conf", I have the line: > > VIDEO_CARDS="intel i915 i965 modesetting" > > Did I miss something? > > Thanks. > Francisco >