From: Willie <matthews.willie@gmail.com>
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] Unexpected Power Loss!
Date: Tue, 13 Nov 2012 19:07:55 -0800 [thread overview]
Message-ID: <CADwZqivad3QgiXPZya_rmjsprA-re3bM_+izYM2kJ4z28WMqSQ@mail.gmail.com> (raw)
In-Reply-To: <1352861498.10571.67.camel@troll>
[-- Attachment #1: Type: text/plain, Size: 4085 bytes --]
I will try monitoring the temp tomorrow. It will take me rebuilding the
kernel, I know that I left everything for monitoring hardware out. As for
the thermal compound. That was all changed yesterday.
On Tue, Nov 13, 2012 at 6:51 PM, Bill Kenworthy <billk@iinet.net.au> wrote:
> There is a thermal safety setting in the kernel somewhere ... it used to
> do this to me when a cpu heatsink came adrift ... but the cpu had to get
> quite hot to trigger it (was on an Intel core2) so it was ok until it
> tried to do real work ... instant off.
>
> Try monitoring the temperature. Also, cpu thermal compound/tape can
> lose its effectiveness on older PC's as well as the usual dust puppies
> blocking cooling etc. Also, depending on how it is setup, Linux might
> be running just enough hotter than windows to trigger it.
>
> BillK
>
>
>
> On Tue, 2012-11-13 at 18:33 -0800, Willie wrote:
> > I think you might be on to something. Here in Vegas it gets to be
> > about 50 at night and I like to have my window open. That is when it
> > turns off the most. I have been using this computer for years with
> > Windows and Ubuntu Linux and this is the first time it has started to
> > happen. Do you know of any setting in Gentoo that I would need to
> > change for this?
> >
> > On Tue, Nov 13, 2012 at 5:10 PM, Dale <rdalek1967@gmail.com> wrote:
> > Willie wrote:
> >
> > > Hey Everyone,
> > >
> > >
> > > I have been dealing with this problem for awhile now. It
> > > seems that whenever I am in Linux my computer will just turn
> > > off. Not shutdown like I did "shutdown -r now". Just
> > > completely off out of the blue at random times. I have been
> > > reading the logs but there is nothing helpful at all. It is
> > > never the same thing on the logs when it does just shutdown.
> > > Sometime I can boot up and it will go off when it says
> > > "Waiting for udev events to finish" or something like that.
> > >
> > >
> > > I haven't done any major upgrades in awhile, there is really
> > > nothing different. I installed Windows last night to see if
> > > it is a hardware thing but nope it stays on. I also tried
> > > reinstalling Gentoo on a couple of occasions on another Hard
> > > Drive but it just shutdown while I was getting it done.
> > >
> > >
> > > Any help is greatly appreciated. I really don't want to be
> > > in Windows after I spent all that time customizing my XFCE4
> > > desktop.
> > >
> > >
> > > --
> > >
> > > Willie Matthews
> > > matthews.willie@gmail.com
> > >
> >
> >
> > Do you have a setting somewhere that when a fan gets below a
> > certain speed it shuts down thinking the fan has failed? I
> > know on mine I have to turn that feature off, especially in
> > the winter. Sometimes my fans only turn at a couple hundred
> > rpms. The mobo sometimes thinks the fan has failed. It seems
> > to vary by brand as to what it does when this happens but I
> > suspect something in Linux not the BIOS itself.
> >
> > Since winders works, which is odd unto itself lol, then it has
> > to be some setting in Linux. I wouldn't think it would be the
> > kernel since it usually locks up instead of cutting off. Do
> > you have lm-sensors installed? I think it has the ability to
> > do this sort of thing. That would be IF this is causing the
> > problem to begin with. ;-)
> >
> > I'm sure you will get lots of ideas on this one tho. There
> > can be a lot of causes.
> >
> > Dale
> >
> > :-) :-)
> > --
> > I am only responsible for what I said ... Not for what you
> understood or how you interpreted my words!
> >
> >
> >
> >
> > --
> >
> > Willie Matthews
> > matthews.willie@gmail.com
>
>
>
>
--
Willie Matthews
matthews.willie@gmail.com
[-- Attachment #2: Type: text/html, Size: 5276 bytes --]
next prev parent reply other threads:[~2012-11-14 3:10 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-14 0:42 [gentoo-user] Unexpected Power Loss! Willie
2012-11-14 0:46 ` Andrew Hoffman
2012-11-14 2:25 ` Willie
2012-11-14 0:57 ` Bruce Hill
2012-11-14 2:26 ` Willie
2012-11-14 2:58 ` Willie
2012-11-14 1:10 ` Dale
2012-11-14 1:28 ` Sascha Cunz
2012-11-14 2:11 ` Dale
2012-11-14 2:28 ` Willie
2012-11-14 2:33 ` Willie
2012-11-14 2:51 ` Bill Kenworthy
2012-11-14 3:07 ` Willie [this message]
2012-11-14 3:25 ` Dale
2012-11-14 9:22 ` Neil Bothwick
2012-11-14 3:38 ` Andrew Lowe
2012-11-14 3:51 ` Willie
2012-11-14 4:37 ` Dale
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CADwZqivad3QgiXPZya_rmjsprA-re3bM_+izYM2kJ4z28WMqSQ@mail.gmail.com \
--to=matthews.willie@gmail.com \
--cc=gentoo-user@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox