* [gentoo-user] newish vbox gentoo guest crashes from startx
@ 2016-12-07 15:34 Harry Putnam
2016-12-07 15:48 ` Alan McKinnon
0 siblings, 1 reply; 8+ messages in thread
From: Harry Putnam @ 2016-12-07 15:34 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 718 bytes --]
Setup:
gentoo 32bit vbox guest on win 10 64bit host
Installed xorg-server, lxde Meta pkgs and deps
(along with many other pkgs ... to many to list
here but included at the end)
uname -a:
Linux g0 4.8.8-gentoo #2 Fri Nov 18 20:16:14 EST 2016 i686 Intel(R)
Xeon(R) CPU X5450 @ 3.00GHz GenuineIntel GNU/Linux
Theoretically the install should be ready now to run X and lxde.
However, when I run `startlxde' nothing whatsoever happens. At least
not at the command line or visibly. Prompt just returns lamely.
However, if I run startx. The vm crashes clear to power off or
sometimes just becomes inoperable with these error messages showing.
(Note: nothing can be clicked moved or etc at this point)
[-- Attachment #2: vbox crash --]
[-- Type: image/png, Size: 30991 bytes --]
[-- Attachment #3: Type: text/plain, Size: 71275 bytes --]
I'm having trouble figuring out where to start to get a handle on
this.
This is not my first time installing gentoo in a vbox vm... I've done
several over time and two just of late. Although the installs were
not trouble free, I had none of this sort of trouble.
Posting /var/log/Xorg.0.log which shows several modules not loading.
vesa and fbdev... but checking my kernel compile I see both were
selected for. Other parts I'm not sure what they might mean.
Also included below is last 175 lines of a debug.log I have setup in
rsyslog.
I can't tell how many lines to include so just a shot in the dark.
There are a number of lines about Vbox not recognizing symbols
And finally a full listing of everthing that has been installed. Which
runs to 650+ lines. So massive amount of data... which seems
.. unavoidable. I've labeled each between these:
------- ------- ---=--- ------- -------
LABEL
------- ------- ---=--- ------- -------
Labels are:
Xorg.0.log
tail_of_debug.log
installed_pkgs_list.txt
Hopefull will make jumping around a bit easier if anyone even gets
that far.
------- ------- ---=--- ------- -------
Xorg.0.log
------- ------- ---=--- ------- -------
[ 1215.250]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 1215.262] X Protocol Version 11, Revision 0
[ 1215.266] Build Operating System: Linux 4.8.8-gentoo i686 Gentoo
[ 1215.268] Current Operating System: Linux g0 4.8.8-gentoo #2 Fri Nov 18 20:16:14 EST 2016 i686
[ 1215.268] Kernel command line: root=/dev/sda3 vga=0x31b video=vesfb:mtrr:3,ywrap
[ 1215.272] Build Date: 06 December 2016 09:05:57PM
[ 1215.274]
[ 1215.277] Current version of pixman: 0.34.0
[ 1215.287] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1215.287] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1215.295] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 7 10:07:52 2016
[ 1215.348] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1215.350] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 1215.371] (==) No Layout section. Using the first Screen section.
[ 1215.371] (==) No screen section available. Using defaults.
[ 1215.371] (**) |-->Screen "Default Screen Section" (0)
[ 1215.371] (**) | |-->Monitor "<default monitor>"
[ 1215.372] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1215.372] (==) Automatically adding devices
[ 1215.372] (==) Automatically enabling devices
[ 1215.372] (==) Automatically adding GPU devices
[ 1215.373] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 1215.385] (WW) The directory "/usr/share/fonts/misc/" does not exist.
[ 1215.385] Entry deleted from font path.
[ 1215.385] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 1215.385] Entry deleted from font path.
[ 1215.385] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1215.385] Entry deleted from font path.
[ 1215.385] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 1215.385] Entry deleted from font path.
[ 1215.385] (WW) The directory "/usr/share/fonts/100dpi/" does not exist.
[ 1215.385] Entry deleted from font path.
[ 1215.385] (WW) The directory "/usr/share/fonts/75dpi/" does not exist.
[ 1215.385] Entry deleted from font path.
[ 1215.385] (==) FontPath set to:
[ 1215.385] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1215.385] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1215.386] (II) Loader magic: 0x8282620
[ 1215.386] (II) Module ABI versions:
[ 1215.386] X.Org ANSI C Emulation: 0.4
[ 1215.386] X.Org Video Driver: 20.0
[ 1215.386] X.Org XInput driver : 22.1
[ 1215.386] X.Org Server Extension : 9.0
[ 1215.390] (--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ 0xe0000000/33554432, BIOS @ 0x????????/131072
[ 1215.390] (II) LoadModule: "glx"
[ 1215.432] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1215.522] (II) Module glx: vendor="X.Org Foundation"
[ 1215.522] compiled for 1.18.4, module version = 1.0.0
[ 1215.522] ABI class: X.Org Server Extension, version 9.0
[ 1215.522] (==) AIGLX enabled
[ 1215.522] (==) Matched vboxvideo as autoconfigured driver 0
[ 1215.522] (==) Matched modesetting as autoconfigured driver 1
[ 1215.522] (==) Matched fbdev as autoconfigured driver 2
[ 1215.522] (==) Matched vesa as autoconfigured driver 3
[ 1215.522] (==) Assigned the driver to the xf86ConfigLayout
[ 1215.522] (II) LoadModule: "vboxvideo"
[ 1215.522] (II) Loading /usr/lib/xorg/modules/drivers/vboxvideo_drv.so
[ 1215.553] (II) Module vboxvideo: vendor="Oracle Corporation"
[ 1215.553] compiled for 1.18.0, module version = 1.0.1
[ 1215.553] Module class: X.Org Video Driver
[ 1215.553] ABI class: X.Org Video Driver, version 20.0
[ 1215.553] (**) Load address of symbol "VBOXVIDEO" is 0xb771e060
[ 1215.554] (II) LoadModule: "modesetting"
[ 1215.554] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 1215.569] (II) Module modesetting: vendor="X.Org Foundation"
[ 1215.569] compiled for 1.18.4, module version = 1.18.4
[ 1215.569] Module class: X.Org Video Driver
[ 1215.569] ABI class: X.Org Video Driver, version 20.0
[ 1215.569] (II) LoadModule: "fbdev"
[ 1215.570] (WW) Warning, couldn't open module fbdev
[ 1215.570] (II) UnloadModule: "fbdev"
[ 1215.570] (II) Unloading fbdev
[ 1215.570] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 1215.570] (II) LoadModule: "vesa"
[ 1215.570] (WW) Warning, couldn't open module vesa
[ 1215.570] (II) UnloadModule: "vesa"
[ 1215.570] (II) Unloading vesa
[ 1215.570] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 1215.570] (II) VBoxVideo: guest driver for VirtualBox: vbox
[ 1215.570] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 1215.571] (--) using VT number 7
[ 1215.580] (WW) Falling back to old probe method for modesetting
[ 1215.580] (EE) open /dev/dri/card0: No such file or directory
[ 1215.580] (II) VBoxVideo(0): VirtualBox guest additions video driver version 5.1.10r112026
[ 1215.580] (II) Loading sub module "ramdac"
[ 1215.580] (II) LoadModule: "ramdac"
[ 1215.580] (II) Module "ramdac" already built-in
[ 1215.580] (II) Loading sub module "fb"
[ 1215.580] (II) LoadModule: "fb"
[ 1215.580] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1215.586] (II) Module fb: vendor="X.Org Foundation"
[ 1215.586] compiled for 1.18.4, module version = 1.0.0
[ 1215.586] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1215.586] (II) Loading sub module "shadowfb"
[ 1215.586] (II) LoadModule: "shadowfb"
[ 1215.586] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 1215.601] (II) Module shadowfb: vendor="X.Org Foundation"
[ 1215.601] compiled for 1.18.4, module version = 1.0.0
[ 1215.601] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1215.601] (II) Loading sub module "vgahw"
[ 1215.601] (II) LoadModule: "vgahw"
[ 1215.601] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 1215.604] (II) Module vgahw: vendor="X.Org Foundation"
[ 1215.604] compiled for 1.18.4, module version = 0.1.0
[ 1215.604] ABI class: X.Org Video Driver, version 20.0
[ 1215.604] (II) VBoxVideo(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 1215.604] (==) VBoxVideo(0): Depth 24, (--) framebuffer bpp 32
[ 1215.604] (--) VBoxVideo(0): Virtual size is 32766x32766 (pitch 32766)
[ 1215.604] (**) VBoxVideo(0): Built-in mode "800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz
[ 1215.604] (II) VBoxVideo(0): Modeline "800x600"x0.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz b)
[ 1215.604] (**) VBoxVideo(0): Built-in mode "800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz
[ 1215.604] (II) VBoxVideo(0): Modeline "800x600"x0.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz b)
[ 1215.604] (II) VBoxVideo(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[ 1215.604] (==) VBoxVideo(0): RGB weight 888
[ 1215.604] (==) VBoxVideo(0): Default visual is TrueColor
[ 1215.604] (==) VBoxVideo(0): Using gamma correction (1.0, 1.0, 1.0)
[ 1215.604] (==) VBoxVideo(0): DPI set to (96, 96)
[ 1215.605] (II) UnloadModule: "modesetting"
[ 1215.605] (II) Unloading modesetting
[ 1215.605] (--) Depth 24 pixmap format is 32 bpp
[ 1215.613] (II) VBoxVideo(0): Requested monitor count: 1
[ 1215.613] (II) VBoxVideo(0): Output VGA-0 has no monitor section
[ 1215.613] (II) VBoxVideo(0): Output VGA-0 has no monitor section
[ 1215.613] (II) VBoxVideo(0): EDID for output VGA-0
[ 1215.613] (II) VBoxVideo(0): Manufacturer: VBX Model: 0 Serial#: 39322400
[ 1215.613] (II) VBoxVideo(0): Year: 1990 Week: 1
[ 1215.613] (II) VBoxVideo(0): EDID Version: 1.3
[ 1215.613] (II) VBoxVideo(0): Digital Display Input
[ 1215.613] (II) VBoxVideo(0): Indeterminate output size
[ 1215.613] (II) VBoxVideo(0): Gamma: 2.20
[ 1215.613] (II) VBoxVideo(0): DPMS capabilities: StandBy Suspend Off
[ 1215.614] (II) VBoxVideo(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 1215.614] (II) VBoxVideo(0): Default color space is primary color space
[ 1215.614] (II) VBoxVideo(0): First detailed timing is preferred mode
[ 1215.614] (II) VBoxVideo(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 1215.614] (II) VBoxVideo(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 1215.614] (II) VBoxVideo(0): Manufacturer's mask: 0
[ 1215.614] (II) VBoxVideo(0): Supported detailed timing:
[ 1215.614] (II) VBoxVideo(0): clock: 29.3 MHz Image Size: 0 x 0 mm
[ 1215.614] (II) VBoxVideo(0): h_active: 800 h_sync: 802 h_sync_end 804 h_blank_end 806 h_border: 0
[ 1215.614] (II) VBoxVideo(0): v_active: 600 v_sync: 602 v_sync_end 604 v_blanking: 606 v_border: 0
[ 1215.614] (II) VBoxVideo(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz, PixClock max 1005 MHz
[ 1215.614] (II) VBoxVideo(0): Monitor name: VBOX monitor
[ 1215.614] (II) VBoxVideo(0): EDID (in hex):
[ 1215.614] (II) VBoxVideo(0): 00ffffffffffff005858000020035802
[ 1215.614] (II) VBoxVideo(0): 0100010380000078eeee91a3544c9926
[ 1215.614] (II) VBoxVideo(0): 0f505400000001010101010101010101
[ 1215.614] (II) VBoxVideo(0): 010101010101720b2006305806200202
[ 1215.614] (II) VBoxVideo(0): 2200000000000000000000fd0000c800
[ 1215.614] (II) VBoxVideo(0): c864000a202020202020000000fc0056
[ 1215.615] (II) VBoxVideo(0): 424f58206d6f6e69746f720a00000010
[ 1215.615] (II) VBoxVideo(0): 000a2020202020202020202020200071
[ 1215.615] (II) VBoxVideo(0): Printing probed modes for output VGA-0
[ 1215.615] (II) VBoxVideo(0): Modeline "800x600"x60.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz Pb)
[ 1215.615] (II) VBoxVideo(0): Modeline "2560x1600"x60.0 247.26 2560 2562 2564 2566 1600 1602 1604 1606 (96.4 kHz b)
[ 1215.615] (II) VBoxVideo(0): Modeline "2560x1440"x60.0 222.63 2560 2562 2564 2566 1440 1442 1444 1446 (86.8 kHz b)
[ 1215.615] (II) VBoxVideo(0): Modeline "2048x1536"x60.0 190.04 2048 2050 2052 2054 1536 1538 1540 1542 (92.5 kHz b)
[ 1215.615] (II) VBoxVideo(0): Modeline "1920x1600"x60.0 185.59 1920 1922 1924 1926 1600 1602 1604 1606 (96.4 kHz b)
[ 1215.615] (II) VBoxVideo(0): Modeline "1920x1080"x60.0 125.50 1920 1922 1924 1926 1080 1082 1084 1086 (65.2 kHz b)
[ 1215.615] (II) VBoxVideo(0): Modeline "1600x1200"x60.0 116.21 1600 1602 1604 1606 1200 1202 1204 1206 (72.4 kHz b)
[ 1215.615] (II) VBoxVideo(0): Modeline "1680x1050"x60.0 106.82 1680 1682 1684 1686 1050 1052 1054 1056 (63.4 kHz b)
[ 1215.615] (II) VBoxVideo(0): Modeline "1400x1050"x60.0 89.08 1400 1402 1404 1406 1050 1052 1054 1056 (63.4 kHz b)
[ 1215.615] (II) VBoxVideo(0): Modeline "1280x1024"x60.0 79.47 1280 1282 1284 1286 1024 1026 1028 1030 (61.8 kHz b)
[ 1215.615] (II) VBoxVideo(0): Modeline "1024x768"x60.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz b)
[ 1215.615] (II) VBoxVideo(0): Modeline "800x600"x60.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz b)
[ 1215.615] (II) VBoxVideo(0): Modeline "640x480"x60.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz b)
[ 1215.615] (II) VBoxVideo(0): Output VGA-0 connected
[ 1215.615] (II) VBoxVideo(0): Using exact sizes for initial modes
[ 1215.615] (II) VBoxVideo(0): Output VGA-0 using initial mode 800x600 +0+0
[ 1215.615] (II) VBoxVideo(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 1215.615] (II) VBoxVideo(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1215.619] (==) VBoxVideo(0): DPMS enabled
[ 1215.620] (--) RandR disabled
[ 1215.622] (II) AIGLX: Screen 0 is not DRI2 capable
[ 1215.622] (EE) AIGLX: reverting to software rendering
[ 1216.314] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 1216.315] (II) AIGLX: Loaded and initialized swrast
[ 1216.315] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 1216.315] (II) VBoxVideo(0): Setting screen physical size to 211 x 158
[ 1216.555] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 1216.555] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1216.555] (II) LoadModule: "evdev"
[ 1216.555] (WW) Warning, couldn't open module evdev
[ 1216.556] (II) UnloadModule: "evdev"
[ 1216.556] (II) Unloading evdev
[ 1216.556] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 1216.556] (EE) No input driver matching `evdev'
[ 1216.556] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 1216.556] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 1216.556] (II) LoadModule: "evdev"
[ 1216.556] (WW) Warning, couldn't open module evdev
[ 1216.557] (II) UnloadModule: "evdev"
[ 1216.557] (II) Unloading evdev
[ 1216.557] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 1216.557] (EE) No input driver matching `evdev'
[ 1216.558] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 1216.558] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 1216.558] (II) LoadModule: "evdev"
[ 1216.558] (WW) Warning, couldn't open module evdev
[ 1216.558] (II) UnloadModule: "evdev"
[ 1216.558] (II) Unloading evdev
[ 1216.558] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 1216.558] (EE) No input driver matching `evdev'
[ 1216.559] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/event5)
[ 1216.559] (**) VirtualBox mouse integration: Applying InputClass "evdev pointer catchall"
[ 1216.559] (II) LoadModule: "evdev"
[ 1216.559] (WW) Warning, couldn't open module evdev
[ 1216.559] (II) UnloadModule: "evdev"
[ 1216.559] (II) Unloading evdev
[ 1216.559] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 1216.559] (EE) No input driver matching `evdev'
[ 1216.560] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 1216.560] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 1216.560] (II) LoadModule: "evdev"
[ 1216.560] (WW) Warning, couldn't open module evdev
[ 1216.560] (II) UnloadModule: "evdev"
[ 1216.560] (II) Unloading evdev
[ 1216.560] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 1216.560] (EE) No input driver matching `evdev'
[ 1216.560] (II) config/udev: Adding input device ImExPS/2 BYD TouchPad (/dev/input/event4)
[ 1216.561] (**) ImExPS/2 BYD TouchPad: Applying InputClass "evdev pointer catchall"
[ 1216.561] (II) LoadModule: "evdev"
[ 1216.561] (WW) Warning, couldn't open module evdev
[ 1216.561] (II) UnloadModule: "evdev"
[ 1216.561] (II) Unloading evdev
[ 1216.561] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 1216.561] (EE) No input driver matching `evdev'
[ 1216.561] (II) config/udev: Adding input device ImExPS/2 BYD TouchPad (/dev/input/mouse0)
[ 1216.562] (II) No input driver specified, ignoring this device.
[ 1216.562] (II) This device may have been added with another device file.
[ 1216.614] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 1216.614] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync.
[ 1216.614] (II) VBoxVideo(0): Using hsync ranges from config file
[ 1216.614] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 1216.614] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 1216.614] (II) VBoxVideo(0): Modeline "800x600"x0.0 29.30 800 802 804 806 600 602 604 606 -hsync -vsync (36.4 kHz eP)
[ 1218.847] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 1218.847] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync.
[ 1218.847] (II) VBoxVideo(0): Using hsync ranges from config file
[ 1218.847] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 1218.847] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 1218.847] (II) VBoxVideo(0): Modeline "800x600"x0.0 29.30 800 802 804 806 600 602 604 606 -hsync -vsync (36.4 kHz eP)
[ 1219.124] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 1219.124] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync.
[ 1219.124] (II) VBoxVideo(0): Using hsync ranges from config file
[ 1219.124] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 1219.124] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 1219.124] (II) VBoxVideo(0): Modeline "800x600"x0.0 29.30 800 802 804 806 600 602 604 606 -hsync -vsync (36.4 kHz eP)
------- ------- ---=--- ------- -------
tail_of_debug.log
------- ------- ---=--- ------- -------
Dec 7 10:09:10 g0 kernel: [ 2.119048] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
Dec 7 10:09:10 g0 kernel: [ 2.192015] scsi host0: ahci
Dec 7 10:09:10 g0 kernel: [ 2.260155] scsi host1: ahci
Dec 7 10:09:10 g0 kernel: [ 2.261016] scsi host2: ahci
Dec 7 10:09:10 g0 kernel: [ 2.261016] scsi host3: ahci
Dec 7 10:09:10 g0 kernel: [ 2.261016] scsi host4: ahci
Dec 7 10:09:10 g0 kernel: [ 2.262016] ata1: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 11
Dec 7 10:09:10 g0 kernel: [ 2.262016] ata2: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806180 irq 11
Dec 7 10:09:10 g0 kernel: [ 2.262016] ata3: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806200 irq 11
Dec 7 10:09:10 g0 kernel: [ 2.262016] ata4: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806280 irq 11
Dec 7 10:09:10 g0 kernel: [ 2.262016] ata5: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806300 irq 11
Dec 7 10:09:10 g0 kernel: [ 2.262016] ata_piix 0000:00:01.1: version 2.13
Dec 7 10:09:10 g0 kernel: [ 2.376015] scsi host5: ata_piix
Dec 7 10:09:10 g0 kernel: [ 2.376015] scsi host6: ata_piix
Dec 7 10:09:10 g0 kernel: [ 2.377015] ata6: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
Dec 7 10:09:10 g0 kernel: [ 2.377015] ata7: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
Dec 7 10:09:10 g0 kernel: [ 2.377015] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
Dec 7 10:09:10 g0 kernel: [ 2.377015] e1000: Copyright (c) 1999-2006 Intel Corporation.
Dec 7 10:09:10 g0 kernel: [ 2.454016] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
Dec 7 10:09:10 g0 kernel: [ 2.454016] PCI: setting IRQ 10 as level-triggered
Dec 7 10:09:10 g0 kernel: [ 2.670053] ata7.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
Dec 7 10:09:10 g0 kernel: [ 2.757016] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 7 10:09:10 g0 kernel: [ 2.863055] ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
Dec 7 10:09:10 g0 kernel: [ 2.867205] ata1.00: 142606336 sectors, multi 128: LBA48 NCQ (depth 31/32)
Dec 7 10:09:10 g0 kernel: [ 2.898196] ata1.00: configured for UDMA/133
Dec 7 10:09:10 g0 kernel: [ 2.904103] ata7.00: configured for UDMA/33
Dec 7 10:09:10 g0 kernel: [ 3.178048] scsi 0:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
Dec 7 10:09:10 g0 kernel: [ 3.257016] sd 0:0:0:0: [sda] 142606336 512-byte logical blocks: (73.0 GB/68.0 GiB)
Dec 7 10:09:10 g0 kernel: [ 3.267016] sd 0:0:0:0: Attached scsi generic sg0 type 0
Dec 7 10:09:10 g0 kernel: [ 3.342050] sd 0:0:0:0: [sda] Write Protect is off
Dec 7 10:09:10 g0 kernel: [ 3.345202] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Dec 7 10:09:10 g0 kernel: [ 3.352015] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 7 10:09:10 g0 kernel: [ 3.602016] sda: sda1 sda2 sda3
Dec 7 10:09:10 g0 kernel: [ 3.636104] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:3a:d4:fe
Dec 7 10:09:10 g0 kernel: [ 3.647175] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
Dec 7 10:09:10 g0 kernel: [ 3.683107] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 7 10:09:10 g0 kernel: [ 3.687166] ata2.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
Dec 7 10:09:10 g0 kernel: [ 3.688115] ata2.00: 132120576 sectors, multi 128: LBA48 NCQ (depth 31/32)
Dec 7 10:09:10 g0 kernel: [ 3.719200] ata2.00: configured for UDMA/133
Dec 7 10:09:10 g0 kernel: [ 3.726093] scsi 1:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
Dec 7 10:09:10 g0 kernel: [ 3.728164] sd 1:0:0:0: [sdb] 132120576 512-byte logical blocks: (67.6 GB/63.0 GiB)
Dec 7 10:09:10 g0 kernel: [ 3.731157] sd 1:0:0:0: [sdb] Write Protect is off
Dec 7 10:09:10 g0 kernel: [ 3.732107] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Dec 7 10:09:10 g0 kernel: [ 3.737223] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Dec 7 10:09:10 g0 kernel: [ 3.771101] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 7 10:09:10 g0 kernel: [ 3.776142] sd 1:0:0:0: Attached scsi generic sg1 type 0
Dec 7 10:09:10 g0 kernel: [ 3.807212] sdb: sdb1
Dec 7 10:09:10 g0 kernel: [ 3.813093] sd 1:0:0:0: [sdb] Attached SCSI disk
Dec 7 10:09:10 g0 kernel: [ 3.816147] sd 0:0:0:0: [sda] Attached SCSI disk
Dec 7 10:09:10 g0 kernel: [ 3.846016] serio: i8042 KBD port at 0x60,0x64 irq 1
Dec 7 10:09:10 g0 kernel: [ 3.850241] serio: i8042 AUX port at 0x60,0x64 irq 12
Dec 7 10:09:10 g0 kernel: [ 3.855099] mousedev: PS/2 mouse device common for all mice
Dec 7 10:09:10 g0 kernel: [ 3.906151] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
Dec 7 10:09:10 g0 kernel: [ 3.941133] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
Dec 7 10:09:10 g0 kernel: [ 3.945168] hidraw: raw HID events driver (C) Jiri Kosina
Dec 7 10:09:10 g0 kernel: [ 3.948159] Initializing XFRM netlink socket
Dec 7 10:09:10 g0 kernel: [ 3.950236] NET: Registered protocol family 17
Dec 7 10:09:10 g0 kernel: [ 3.958172] Key type dns_resolver registered
Dec 7 10:09:10 g0 kernel: [ 3.963174] microcode: sig=0x10676, pf=0x40, revision=0x60b
Dec 7 10:09:10 g0 kernel: [ 3.995174] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Dec 7 10:09:10 g0 kernel: [ 4.047192] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Dec 7 10:09:10 g0 kernel: [ 4.099203] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 7 10:09:10 g0 kernel: [ 4.103198] ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
Dec 7 10:09:10 g0 kernel: [ 4.104152] ata3.00: 83886080 sectors, multi 128: LBA48 NCQ (depth 31/32)
Dec 7 10:09:10 g0 kernel: [ 4.109160] ata3.00: configured for UDMA/133
Dec 7 10:09:10 g0 kernel: [ 4.114016] scsi 2:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
Dec 7 10:09:10 g0 kernel: [ 4.123081] sd 2:0:0:0: [sdc] 83886080 512-byte logical blocks: (42.9 GB/40.0 GiB)
Dec 7 10:09:10 g0 kernel: [ 4.128129] sd 2:0:0:0: Attached scsi generic sg2 type 0
Dec 7 10:09:10 g0 kernel: [ 4.129092] sd 2:0:0:0: [sdc] Write Protect is off
Dec 7 10:09:10 g0 kernel: [ 4.131053] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Dec 7 10:09:10 g0 kernel: [ 4.134126] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 7 10:09:10 g0 kernel: [ 4.164225] sdc: sdc1
Dec 7 10:09:10 g0 kernel: [ 4.171074] sd 2:0:0:0: [sdc] Attached SCSI disk
Dec 7 10:09:10 g0 kernel: [ 4.347015] input: ImExPS/2 BYD TouchPad as /devices/platform/i8042/serio1/input/input5
Dec 7 10:09:10 g0 kernel: [ 4.449721] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 7 10:09:10 g0 kernel: [ 4.454186] ata4.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
Dec 7 10:09:10 g0 kernel: [ 4.456237] ata4.00: 209715200 sectors, multi 128: LBA48 NCQ (depth 31/32)
Dec 7 10:09:10 g0 kernel: [ 4.462085] ata4.00: configured for UDMA/133
Dec 7 10:09:10 g0 kernel: [ 4.465079] scsi 3:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
Dec 7 10:09:10 g0 kernel: [ 4.467168] sd 3:0:0:0: [sdd] 209715200 512-byte logical blocks: (107 GB/100 GiB)
Dec 7 10:09:10 g0 kernel: [ 4.476175] sd 3:0:0:0: Attached scsi generic sg3 type 0
Dec 7 10:09:10 g0 kernel: [ 4.481101] sd 3:0:0:0: [sdd] Write Protect is off
Dec 7 10:09:10 g0 kernel: [ 4.482011] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
Dec 7 10:09:10 g0 kernel: [ 4.483220] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 7 10:09:10 g0 kernel: [ 4.498168] sdd: sdd1
Dec 7 10:09:10 g0 kernel: [ 4.503090] sd 3:0:0:0: [sdd] Attached SCSI disk
Dec 7 10:09:10 g0 kernel: [ 4.616016] random: crng init done
Dec 7 10:09:10 g0 kernel: [ 4.827552] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 7 10:09:10 g0 kernel: [ 4.834037] ata5.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
Dec 7 10:09:10 g0 kernel: [ 4.834050] ata5.00: 83886080 sectors, multi 128: LBA48 NCQ (depth 31/32)
Dec 7 10:09:10 g0 kernel: [ 4.840078] ata5.00: configured for UDMA/133
Dec 7 10:09:10 g0 kernel: [ 4.842102] scsi 4:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
Dec 7 10:09:10 g0 kernel: [ 4.844191] sd 4:0:0:0: [sde] 83886080 512-byte logical blocks: (42.9 GB/40.0 GiB)
Dec 7 10:09:10 g0 kernel: [ 4.853130] sd 4:0:0:0: Attached scsi generic sg4 type 0
Dec 7 10:09:10 g0 kernel: [ 4.858165] sd 4:0:0:0: [sde] Write Protect is off
Dec 7 10:09:10 g0 kernel: [ 4.859111] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
Dec 7 10:09:10 g0 kernel: [ 4.861184] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 7 10:09:10 g0 kernel: [ 4.868016] scsi 6:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
Dec 7 10:09:10 g0 kernel: [ 4.875204] sde: sde1
Dec 7 10:09:10 g0 kernel: [ 4.884085] sr 6:0:0:0: [sr0] scsi3-mmc drive: 32x/32x xa/form2 tray
Dec 7 10:09:10 g0 kernel: [ 4.886264] cdrom: Uniform CD-ROM driver Revision: 3.20
Dec 7 10:09:10 g0 kernel: [ 4.891132] sd 4:0:0:0: [sde] Attached SCSI disk
Dec 7 10:09:10 g0 kernel: [ 4.899171] sr 6:0:0:0: Attached scsi CD-ROM sr0
Dec 7 10:09:10 g0 kernel: [ 4.923180] sr 6:0:0:0: Attached scsi generic sg5 type 5
Dec 7 10:09:10 g0 kernel: [ 5.025624] EXT4-fs (sda3): couldn't mount as ext3 due to feature incompatibilities
Dec 7 10:09:10 g0 kernel: [ 5.063968] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
Dec 7 10:09:10 g0 kernel: [ 5.067208] EXT4-fs (sda3): write access will be enabled during recovery
Dec 7 10:09:10 g0 kernel: [ 5.393053] EXT4-fs (sda3): recovery complete
Dec 7 10:09:10 g0 kernel: [ 5.402044] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
Dec 7 10:09:10 g0 kernel: [ 5.402044] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
Dec 7 10:09:10 g0 kernel: [ 5.428649] devtmpfs: mounted
Dec 7 10:09:10 g0 kernel: [ 5.439016] Freeing unused kernel memory: 356K (c1743000 - c179c000)
Dec 7 10:09:10 g0 kernel: [ 5.451088] Write protecting the kernel text: 5400k
Dec 7 10:09:10 g0 kernel: [ 5.459112] Write protecting the kernel read-only data: 1716k
Dec 7 10:09:10 g0 kernel: [ 13.621061] vboxguest: loading out-of-tree module taints kernel.
Dec 7 10:09:10 g0 kernel: [ 13.760016] e1000 0000:00:03.0 enp0s3: renamed from eth0
Dec 7 10:09:10 g0 kernel: [ 13.910016] ACPI: No IRQ available for PCI Interrupt Link [LNKD]. Try pci=noacpi or acpi=off
Dec 7 10:09:10 g0 kernel: [ 13.910016] vboxguest 0000:00:04.0: PCI INT A: no GSI
Dec 7 10:09:10 g0 kernel: [ 13.959148] vgdrvHeartbeatInit: Setting up heartbeat to trigger every 2000 milliseconds
Dec 7 10:09:10 g0 kernel: [ 15.167016] input: Unspecified device as /devices/pci0000:00/0000:00:04.0/input/input6
Dec 7 10:09:10 g0 kernel: [ 15.169058] vboxguest: misc device minor 58, IRQ 9, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
Dec 7 10:09:10 g0 kernel: [ 15.170016] vboxguest: Successfully loaded version 5.1.10 (interface 0x00010004)
Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_mmap (err 0)
Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_global_release (err 0)
Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_pool_unpopulate (err 0)
Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_manager_func (err 0)
Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_global_init (err 0)
Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_device_release (err 0)
Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_kunmap (err 0)
Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_del_sub_from_lru (err 0)
Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_device_init (err 0)
Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_init_mm (err 0)
Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_dma_acc_size (err 0)
Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_tt_init (err 0)
Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_kmap (err 0)
Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_add_to_lru (err 0)
Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_unref (err 0)
Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_mem_global_release (err 0)
Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_mem_global_init (err 0)
Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_default_lru_tail (err 0)
Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_default_swap_lru_tail (err 0)
Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_init (err 0)
Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_validate (err 0)
Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_move_memcpy (err 0)
Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_tt_fini (err 0)
Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_pool_populate (err 0)
Dec 7 10:09:10 g0 kernel: [ 17.155418] EXT4-fs (sda3): re-mounted. Opts: (null)
Dec 7 10:09:10 g0 kernel: [ 17.815016] Adding 2916348k swap on /dev/sda2. Priority:-1 extents:1 across:2916348k
Dec 7 10:09:10 g0 kernel: [ 18.071060] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
Dec 7 10:09:10 g0 kernel: [ 18.108282] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
Dec 7 10:09:10 g0 kernel: [ 18.166016] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
Dec 7 10:09:10 g0 kernel: [ 18.214179] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null)
Dec 7 10:09:11 g0 /usr/sbin/gpm[1066]: *** info [daemon/startup.c(136)]:
Dec 7 10:09:11 g0 /usr/sbin/gpm[1066]: Started gpm successfully. Entered daemon mode.
Dec 7 10:09:13 g0 kernel: [ 24.866181] e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
Dec 7 10:09:15 g0 sendmail[1316]: alias database /etc/mail/aliases rebuilt by root
Dec 7 10:09:15 g0 sendmail[1316]: /etc/mail/aliases: 23 aliases, longest 10 bytes, 244 bytes total
Dec 7 10:09:15 g0 sm-mta[1320]: starting daemon (8.15.2): SMTP+queueing@00:30:00
Dec 7 10:09:15 g0 sm-mta[1320]: started as: /usr/sbin/sendmail -bd -q30m -L sm-mta
Dec 7 10:09:15 g0 sm-cm[1323]: starting daemon (8.15.2): queueing@00:30:00
Dec 7 10:09:15 g0 sshd[1352]: Server listening on 0.0.0.0 port 22.
Dec 7 10:09:15 g0 cron[1377]: (CRON) STARTUP (V5.0)
Dec 7 10:09:16 g0 sm-mta[1320]: NOQUEUE: stopping daemon, reason=signal
Dec 7 10:09:19 g0 kernel: [ 30.613016] e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
Dec 7 10:09:20 g0 sendmail[1819]: alias database /etc/mail/aliases rebuilt by root
Dec 7 10:09:20 g0 sendmail[1819]: /etc/mail/aliases: 23 aliases, longest 10 bytes, 244 bytes total
Dec 7 10:09:20 g0 sm-mta[1829]: starting daemon (8.15.2): SMTP+queueing@00:30:00
Dec 7 10:09:20 g0 sm-mta[1829]: started as: /usr/sbin/sendmail -bd -q30m -L sm-mta
Dec 7 10:09:20 g0 sm-cm[1832]: starting daemon (8.15.2): queueing@00:30:00
Dec 7 10:09:30 g0 login[1849]: pam_unix(login:session): session opened for user harry by LOGIN(uid=0)
Dec 7 10:09:54 g0 sshd[1867]: Accepted keyboard-interactive/pam for harry from 192.168.1.20 port 62164 ssh2
Dec 7 10:09:54 g0 sshd[1867]: pam_unix(sshd:session): session opened for user harry by (uid=0)
Dec 7 10:10:01 g0 cron[1882]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons)
Dec 7 10:10:49 g0 sshd[1899]: Accepted keyboard-interactive/pam for root from 127.0.0.1 port 40842 ssh2
Dec 7 10:10:49 g0 sshd[1899]: pam_unix(sshd:session): session opened for user root by (uid=0)
------- ------- ---=--- ------- -------
installed_pkgs_list.txt
------- ------- ---=--- ------- -------
Wed Nov 16 18:12:43 2016 >>> app-eselect/eselect-vi-1.1.7-r1
Wed Nov 16 18:12:56 2016 >>> app-eselect/eselect-ctags-1.18
Wed Nov 16 18:13:50 2016 >>> dev-util/ctags-5.8
Wed Nov 16 18:15:36 2016 >>> app-editors/vim-core-7.4.769
Wed Nov 16 18:18:26 2016 >>> app-editors/vim-7.4.769
Wed Nov 16 18:18:43 2016 >>> app-vim/gentoo-syntax-20160530
Wed Nov 16 18:29:44 2016 >>> app-shells/push-1.6
Wed Nov 16 18:30:15 2016 >>> app-portage/portage-utils-0.62
Wed Nov 16 18:34:49 2016 >>> app-portage/eix-0.31.7-r1
Wed Nov 16 18:53:22 2016 >>> sys-kernel/linux-headers-4.8
Wed Nov 16 19:29:02 2016 >>> sys-libs/glibc-2.23-r3
Wed Nov 16 19:31:13 2016 >>> dev-libs/expat-2.2.0-r1
Wed Nov 16 19:31:32 2016 >>> sys-devel/gnuconfig-20161104
Wed Nov 16 19:32:56 2016 >>> sys-libs/gdbm-1.12
Wed Nov 16 19:33:16 2016 >>> sys-apps/gentoo-functions-0.11
Wed Nov 16 19:33:51 2016 >>> sys-apps/debianutils-4.8
Wed Nov 16 19:34:35 2016 >>> net-libs/libmnl-1.0.4
Wed Nov 16 19:37:09 2016 >>> dev-libs/lzo-2.09
Wed Nov 16 19:38:19 2016 >>> dev-libs/libbsd-0.8.3
Wed Nov 16 19:38:39 2016 >>> sys-apps/baselayout-2.3
Wed Nov 16 19:43:42 2016 >>> sys-apps/busybox-1.25.1
Wed Nov 16 19:44:44 2016 >>> sys-libs/libseccomp-2.3.1
Wed Nov 16 19:44:57 2016 >>> app-shells/quoter-2.0_p2
Wed Nov 16 19:45:12 2016 >>> app-shells/push-1.11
Wed Nov 16 19:46:20 2016 >>> dev-util/re2c-0.16
Wed Nov 16 19:46:37 2016 >>> sys-apps/install-xattr-0.5-r1
Wed Nov 16 19:46:54 2016 >>> dev-libs/gobject-introspection-common-1.50.0
Wed Nov 16 19:48:08 2016 >>> media-libs/libpng-1.6.26
Wed Nov 16 19:49:38 2016 >>> sys-apps/file-5.29
Wed Nov 16 19:50:06 2016 >>> sys-libs/timezone-data-2016i
Wed Nov 16 19:50:27 2016 >>> sys-devel/gcc-config-1.8-r1
Wed Nov 16 19:50:51 2016 >>> net-misc/iputils-20151218
Wed Nov 16 19:51:32 2016 >>> sys-apps/net-tools-1.60_p20161110235919
Wed Nov 16 19:51:51 2016 >>> dev-libs/vala-common-0.34.2
Wed Nov 16 19:57:45 2016 >>> dev-libs/gmp-6.1.1
Wed Nov 16 19:58:22 2016 >>> app-arch/zip-3.0-r3
Wed Nov 16 20:02:19 2016 >>> dev-libs/mpfr-3.1.5
Wed Nov 16 20:04:21 2016 >>> dev-libs/mpc-1.0.3
Wed Nov 16 20:11:32 2016 >>> sys-apps/coreutils-8.25
Wed Nov 16 20:12:00 2016 >>> app-portage/portage-utils-0.63
Wed Nov 16 20:12:38 2016 >>> dev-lang/python-exec-2.4.4
Wed Nov 16 20:14:30 2016 >>> net-misc/rsync-3.1.2
Wed Nov 16 20:16:31 2016 >>> net-firewall/iptables-1.6.0-r1
Wed Nov 16 20:19:22 2016 >>> dev-libs/libpipeline-1.4.1
Wed Nov 16 20:20:50 2016 >>> sys-apps/kmod-23
Wed Nov 16 20:21:21 2016 >>> app-misc/pax-utils-1.1.7
Wed Nov 16 20:23:26 2016 >>> sys-apps/sandbox-2.11-r3
Wed Nov 16 20:23:57 2016 >>> sys-libs/libcap-2.25
Wed Nov 16 20:24:26 2016 >>> sys-apps/man-pages-4.08
Wed Nov 16 20:24:46 2016 >>> app-eselect/eselect-python-20160516
Wed Nov 16 20:24:59 2016 >>> virtual/udev-217
Wed Nov 16 20:25:17 2016 >>> sys-fs/udev-init-scripts-32
Wed Nov 16 20:25:34 2016 >>> app-eselect/eselect-opengl-1.3.1-r4
Wed Nov 16 20:26:00 2016 >>> net-misc/netifrc-0.5.1
Wed Nov 16 20:26:16 2016 >>> virtual/libudev-232
Wed Nov 16 20:26:29 2016 >>> app-eselect/eselect-mesa-0.0.10
Wed Nov 16 20:28:24 2016 >>> app-text/docbook-xsl-stylesheets-1.79.1-r1
Wed Nov 16 20:28:41 2016 >>> app-text/build-docbook-catalog-1.21
Wed Nov 16 20:28:57 2016 >>> app-text/docbook-xml-dtd-4.2-r2
Wed Nov 16 20:29:14 2016 >>> app-text/docbook-xml-dtd-4.4-r2
Wed Nov 16 20:29:30 2016 >>> app-admin/perl-cleaner-2.22
Wed Nov 16 20:29:45 2016 >>> app-eselect/eselect-vi-1.1.9
Wed Nov 16 20:30:29 2016 >>> x11-proto/xproto-7.0.31
Wed Nov 16 20:32:30 2016 >>> sys-apps/sed-4.2.2
Wed Nov 16 20:32:54 2016 >>> x11-themes/hicolor-icon-theme-0.15
Wed Nov 16 20:33:20 2016 >>> app-admin/eselect-1.4.7
Wed Nov 16 20:34:20 2016 >>> x11-misc/shared-mime-info-1.7
Wed Nov 16 20:35:00 2016 >>> x11-proto/xextproto-7.3.0
Wed Nov 16 20:39:30 2016 >>> dev-libs/libxml2-2.9.4
Wed Nov 16 20:40:56 2016 >>> media-libs/freetype-2.7-r2
Wed Nov 16 20:57:28 2016 >>> sys-devel/binutils-2.27
Wed Nov 16 20:58:40 2016 >>> sys-devel/make-4.2.1
Wed Nov 16 21:07:57 2016 >>> sys-libs/db-6.0.35
Wed Nov 16 21:17:59 2016 >>> dev-lang/perl-5.24.0-r2
Wed Nov 16 21:18:20 2016 >>> sys-apps/hwids-20161103
Wed Nov 16 21:18:33 2016 >>> virtual/perl-ExtUtils-MakeMaker-7.100.100_rc
Wed Nov 16 21:18:45 2016 >>> virtual/perl-Test-Harness-3.360.0
Wed Nov 16 21:18:58 2016 >>> virtual/perl-Data-Dumper-2.160.0
Wed Nov 16 21:19:10 2016 >>> virtual/perl-File-Spec-3.630.0
Wed Nov 16 21:19:23 2016 >>> virtual/perl-CPAN-Meta-YAML-0.18.0
Wed Nov 16 21:19:36 2016 >>> virtual/perl-Parse-CPAN-Meta-1.441.700
Wed Nov 16 21:19:58 2016 >>> dev-perl/Text-CharWidth-0.40.0-r1
Wed Nov 16 21:20:21 2016 >>> perl-core/File-Temp-0.230.400-r1
Wed Nov 16 21:20:49 2016 >>> dev-perl/XML-Parser-2.440.0
Wed Nov 16 21:21:51 2016 >>> dev-lang/nasm-2.12.01
Wed Nov 16 21:22:03 2016 >>> virtual/perl-version-0.991.600
Wed Nov 16 21:22:14 2016 >>> virtual/perl-podlators-4.70.0
Wed Nov 16 21:22:26 2016 >>> virtual/perl-Perl-OSType-1.9.0
Wed Nov 16 21:22:39 2016 >>> virtual/perl-Module-Metadata-1.0.31
Wed Nov 16 21:22:51 2016 >>> virtual/perl-Getopt-Long-2.480.0
Wed Nov 16 21:23:04 2016 >>> virtual/perl-ExtUtils-ParseXS-3.310.0
Wed Nov 16 21:23:16 2016 >>> virtual/perl-ExtUtils-CBuilder-0.280.225
Wed Nov 16 21:25:33 2016 >>> media-libs/libjpeg-turbo-1.5.1
Wed Nov 16 21:25:55 2016 >>> dev-perl/Text-WrapI18N-0.60.0-r1
Wed Nov 16 21:26:39 2016 >>> dev-perl/Text-Unidecode-1.270.0
Wed Nov 16 21:27:03 2016 >>> dev-perl/TermReadKey-2.330.0
Wed Nov 16 21:27:25 2016 >>> dev-perl/Unicode-EastAsianWidth-1.330.0-r1
Wed Nov 16 21:28:00 2016 >>> dev-perl/libintl-perl-1.240.0-r2
Wed Nov 16 21:28:12 2016 >>> virtual/perl-CPAN-Meta-2.150.5
Wed Nov 16 21:28:26 2016 >>> virtual/jpeg-0-r2
Wed Nov 16 21:28:48 2016 >>> dev-perl/Module-Build-0.421.800
Wed Nov 16 21:29:07 2016 >>> dev-perl/SGMLSpm-1.1-r1
Wed Nov 16 21:29:38 2016 >>> sys-devel/autoconf-2.69-r2
Wed Nov 16 21:31:22 2016 >>> app-editors/vim-core-8.0.0005-r1
Wed Nov 16 21:32:01 2016 >>> x11-proto/inputproto-2.3.2
Wed Nov 16 21:35:49 2016 >>> sys-libs/pam-1.3.0
Wed Nov 16 21:36:23 2016 >>> x11-proto/renderproto-0.11.1-r1
Wed Nov 16 21:37:00 2016 >>> x11-libs/xtrans-1.3.5
Wed Nov 16 21:38:03 2016 >>> x11-libs/libICE-1.0.9
Wed Nov 16 21:38:59 2016 >>> x11-libs/libSM-1.2.2-r1
Thu Nov 17 00:07:23 2016 >>> sys-devel/gcc-5.4.0
Thu Nov 17 00:08:19 2016 >>> x11-libs/libXau-1.0.8
Thu Nov 17 00:09:04 2016 >>> dev-libs/libpthread-stubs-0.3-r1
Thu Nov 17 00:09:59 2016 >>> x11-libs/libXdmcp-1.1.2-r1
Thu Nov 17 00:10:39 2016 >>> x11-proto/kbproto-1.0.7
Thu Nov 17 00:11:11 2016 >>> x11-proto/xf86vidmodeproto-2.3.1-r1
Thu Nov 17 00:11:43 2016 >>> x11-proto/damageproto-1.2.1-r1
Thu Nov 17 00:16:01 2016 >>> app-arch/tar-1.29-r1
Thu Nov 17 00:21:08 2016 >>> sys-libs/binutils-libs-2.27
Thu Nov 17 00:23:05 2016 >>> x11-libs/pixman-0.34.0
Thu Nov 17 00:24:00 2016 >>> dev-libs/nspr-4.13.1
Thu Nov 17 00:24:27 2016 >>> x11-proto/xf86bigfontproto-1.2.0-r1
Thu Nov 17 00:26:10 2016 >>> sys-libs/e2fsprogs-libs-1.43.3
Thu Nov 17 00:29:26 2016 >>> sys-fs/e2fsprogs-1.43.3-r1
Thu Nov 17 00:32:21 2016 >>> app-arch/libarchive-3.2.2
Thu Nov 17 00:34:56 2016 >>> media-libs/tiff-4.0.6-r1
Thu Nov 17 00:36:13 2016 >>> x11-libs/libdrm-2.4.73
Thu Nov 17 00:37:06 2016 >>> x11-libs/libxshmfence-1.2
Thu Nov 17 00:39:08 2016 >>> dev-libs/nettle-3.3
Thu Nov 17 00:39:40 2016 >>> x11-proto/fixesproto-5.0-r1
Thu Nov 17 00:40:18 2016 >>> x11-proto/randrproto-1.5.0
Thu Nov 17 00:40:50 2016 >>> x11-proto/compositeproto-0.4.2-r1
Thu Nov 17 00:41:31 2016 >>> x11-proto/recordproto-1.14.2-r1
Thu Nov 17 00:43:33 2016 >>> sys-devel/libtool-2.4.6-r2
Thu Nov 17 00:44:15 2016 >>> sys-devel/automake-1.15-r2
Thu Nov 17 00:44:40 2016 >>> x11-misc/util-macros-1.19.0
Thu Nov 17 00:45:18 2016 >>> media-fonts/font-util-1.3.1
Thu Nov 17 00:46:16 2016 >>> dev-libs/libatomic_ops-7.4.2
Thu Nov 17 00:47:06 2016 >>> x11-libs/libfontenc-1.1.3
Thu Nov 17 00:47:44 2016 >>> x11-proto/dri3proto-1.0
Thu Nov 17 00:48:22 2016 >>> x11-proto/presentproto-1.0
Thu Nov 17 00:49:01 2016 >>> x11-proto/glproto-1.4.17-r1
Thu Nov 17 00:49:41 2016 >>> x11-proto/dri2proto-2.8-r1
Thu Nov 17 00:50:12 2016 >>> x11-proto/xf86driproto-2.1.1-r1
Thu Nov 17 00:54:16 2016 >>> net-misc/curl-7.51.0
Thu Nov 17 00:55:33 2016 >>> dev-libs/libuv-1.10.0
Thu Nov 17 00:56:12 2016 >>> x11-apps/mkfontscale-1.1.2
Thu Nov 17 00:57:31 2016 >>> dev-libs/boehm-gc-7.4.2
Thu Nov 17 00:58:11 2016 >>> x11-apps/mkfontdir-1.0.7
Thu Nov 17 00:58:41 2016 >>> media-fonts/encodings-1.0.4
Thu Nov 17 00:58:59 2016 >>> media-fonts/liberation-fonts-2.00.1-r2
Thu Nov 17 00:59:08 2016 >>> virtual/ttf-fonts-1
Thu Nov 17 01:01:32 2016 >>> media-libs/fontconfig-2.12.1
Thu Nov 17 01:01:43 2016 >>> app-eselect/eselect-fontconfig-1.1-r1
Thu Nov 17 01:02:09 2016 >>> dev-util/desktop-file-utils-0.23
Thu Nov 17 01:03:29 2016 >>> dev-libs/libcroco-0.6.11
Thu Nov 17 01:04:45 2016 >>> sys-devel/flex-2.6.1
Thu Nov 17 01:06:00 2016 >>> sys-apps/iproute2-4.8.0
Thu Nov 17 15:29:17 2016 >>> dev-libs/libxml2-2.9.4
Thu Nov 17 15:29:52 2016 >>> dev-perl/Locale-gettext-1.70.0
Thu Nov 17 15:31:04 2016 >>> sys-libs/readline-7.0-r1
Thu Nov 17 15:33:19 2016 >>> dev-libs/libpcre-8.39
Thu Nov 17 15:35:35 2016 >>> sys-apps/gawk-4.1.4
Thu Nov 17 15:36:12 2016 >>> app-portage/gentoolkit-0.3.2-r1
Thu Nov 17 15:37:34 2016 >>> sys-libs/gpm-1.20.7-r2
Thu Nov 17 15:49:18 2016 >>> sys-libs/ncurses-6.0-r1
Thu Nov 17 15:52:19 2016 >>> app-shells/bash-4.4_p5
Thu Nov 17 15:53:07 2016 >>> sys-apps/less-487
Thu Nov 17 15:54:57 2016 >>> sys-process/procps-3.3.12
Thu Nov 17 16:14:24 2016 >>> sys-devel/gettext-0.19.8.1
Thu Nov 17 16:15:06 2016 >>> app-portage/ufed-0.92
Thu Nov 17 16:22:38 2016 >>> sys-apps/util-linux-2.29
Thu Nov 17 16:23:34 2016 >>> sys-process/psmisc-22.21-r3
Thu Nov 17 16:27:12 2016 >>> sys-apps/texinfo-6.3
Thu Nov 17 16:27:48 2016 >>> app-text/po4a-0.45-r3
Thu Nov 17 16:29:00 2016 >>> sys-apps/openrc-0.22.4
Thu Nov 17 16:50:12 2016 >>> app-misc/screen-4.4.0
Thu Nov 17 16:51:25 2016 >>> sys-libs/readline-7.0-r1
Thu Nov 17 16:52:51 2016 >>> sys-libs/gpm-1.20.7-r2
Thu Nov 17 16:53:49 2016 >>> dev-util/cscope-15.8a-r1
Thu Nov 17 16:58:20 2016 >>> dev-libs/libxml2-2.9.4
Thu Nov 17 16:59:06 2016 >>> x11-proto/xcb-proto-1.12-r2
Thu Nov 17 17:02:07 2016 >>> x11-libs/libxcb-1.12-r2
Thu Nov 17 17:08:10 2016 >>> x11-libs/libX11-1.6.4
Thu Nov 17 17:09:45 2016 >>> x11-libs/libXt-1.1.5
Thu Nov 17 17:10:47 2016 >>> x11-libs/libXext-1.3.3
Thu Nov 17 17:11:58 2016 >>> x11-libs/libXmu-1.1.2
Thu Nov 17 17:14:57 2016 >>> app-editors/vim-8.0.0005
Thu Nov 17 17:15:38 2016 >>> x11-apps/xhost-1.0.7
Thu Nov 17 17:16:23 2016 >>> x11-apps/xauth-1.0.9-r2
Thu Nov 17 17:16:39 2016 >>> x11-misc/sux-1.0-r4
Thu Nov 17 17:16:56 2016 >>> app-portage/cfg-update-1.8.9
Thu Nov 17 20:07:13 2016 >>> sys-devel/autoconf-archive-2016.09.16
Thu Nov 17 20:07:54 2016 >>> sys-apps/tcp-wrappers-7.6.22-r1
Thu Nov 17 20:08:08 2016 >>> sys-process/cronbase-0.3.7-r6
Thu Nov 17 20:14:55 2016 >>> dev-libs/libunistring-0.9.6
Thu Nov 17 20:15:11 2016 >>> net-mail/mailbase-1.1
Thu Nov 17 20:16:32 2016 >>> dev-libs/libfastjson-0.99.4
Thu Nov 17 20:17:29 2016 >>> dev-libs/libestr-0.1.10
Thu Nov 17 20:17:51 2016 >>> sys-devel/autoconf-2.13
Thu Nov 17 20:25:18 2016 >>> dev-lang/python-3.4.5
Thu Nov 17 20:31:33 2016 >>> dev-lang/python-2.7.12
Thu Nov 17 20:32:32 2016 >>> x11-libs/libXrender-0.9.10
Thu Nov 17 20:33:28 2016 >>> x11-libs/libXfixes-5.0.3
Thu Nov 17 20:34:24 2016 >>> x11-libs/libXxf86vm-1.1.4
Thu Nov 17 20:35:54 2016 >>> dev-libs/boehm-gc-7.4.2
Thu Nov 17 20:36:45 2016 >>> dev-libs/liblogging-1.0.5
Thu Nov 17 20:38:20 2016 >>> sys-boot/grub-0.97-r17
Thu Nov 17 20:38:45 2016 >>> sys-process/vixie-cron-4.1-r14
Thu Nov 17 20:40:30 2016 >>> mail-mta/sendmail-8.14.9-r1
Thu Nov 17 20:41:55 2016 >>> x11-libs/libXi-1.7.8
Thu Nov 17 20:42:52 2016 >>> x11-libs/libXdamage-1.1.4-r1
Thu Nov 17 20:43:53 2016 >>> app-misc/ca-certificates-20160104.3.27.1-r2
Thu Nov 17 20:45:34 2016 >>> app-portage/pfl-2.4-r4
Thu Nov 17 20:47:12 2016 >>> dev-util/ninja-1.7.1
Thu Nov 17 20:51:45 2016 >>> net-dns/libidn-1.33
Thu Nov 17 20:53:02 2016 >>> dev-libs/libgpg-error-1.24
Thu Nov 17 20:53:34 2016 >>> sys-apps/help2man-1.47.4
Thu Nov 17 20:56:22 2016 >>> dev-libs/libtasn1-4.9-r1
Thu Nov 17 20:57:08 2016 >>> sys-devel/automake-1.14.1-r1
Thu Nov 17 20:58:17 2016 >>> sys-apps/portage-2.3.2
Thu Nov 17 20:58:50 2016 >>> dev-util/gdbus-codegen-2.50.2
Thu Nov 17 21:07:07 2016 >>> dev-libs/glib-2.50.2
Thu Nov 17 21:08:05 2016 >>> dev-util/pkgconfig-0.29.1
Thu Nov 17 21:12:01 2016 >>> dev-lang/spidermonkey-1.8.5-r6
Thu Nov 17 21:12:57 2016 >>> x11-libs/libXcomposite-0.4.4-r1
Thu Nov 17 21:13:55 2016 >>> x11-libs/libXrandr-1.5.1
Thu Nov 17 21:14:54 2016 >>> x11-libs/libXcursor-1.1.14
Thu Nov 17 21:15:50 2016 >>> x11-libs/libXtst-1.2.3
Thu Nov 17 21:16:51 2016 >>> x11-libs/libXft-2.3.2
Thu Nov 17 21:33:46 2016 >>> dev-util/cmake-3.7.0
Thu Nov 17 23:06:47 2016 >>> sys-devel/llvm-3.9.0-r1
Fri Nov 18 00:06:33 2016 >>> media-libs/mesa-13.0.1
Fri Nov 18 00:11:19 2016 >>> x11-libs/cairo-1.14.6
Fri Nov 18 00:13:52 2016 >>> dev-libs/gobject-introspection-1.50.0
Fri Nov 18 00:17:41 2016 >>> x11-libs/gdk-pixbuf-2.36.0
Fri Nov 18 00:19:17 2016 >>> dev-libs/atk-2.22.0
Fri Nov 18 00:20:43 2016 >>> media-libs/libepoxy-1.3.1
Fri Nov 18 00:21:44 2016 >>> dev-util/gtk-update-icon-cache-3.22.2
Fri Nov 18 00:22:34 2016 >>> media-gfx/graphite2-1.3.8
Fri Nov 18 00:24:34 2016 >>> media-libs/harfbuzz-1.3.3
Fri Nov 18 00:27:47 2016 >>> x11-libs/pango-1.40.3
Fri Nov 18 00:29:36 2016 >>> gnome-base/librsvg-2.40.16
Fri Nov 18 00:38:31 2016 >>> x11-themes/adwaita-icon-theme-3.22.0
Fri Nov 18 01:08:05 2016 >>> dev-scheme/guile-2.0.13
Fri Nov 18 01:11:48 2016 >>> sys-devel/autogen-5.18.12
Fri Nov 18 01:21:44 2016 >>> net-libs/gnutls-3.4.16
Fri Nov 18 01:23:20 2016 >>> www-client/w3m-0.5.3-r8
Fri Nov 18 01:23:32 2016 >>> virtual/w3m-0
Fri Nov 18 01:24:10 2016 >>> dev-python/setuptools-28.8.0
Fri Nov 18 01:24:42 2016 >>> dev-python/certifi-2016.9.26
Fri Nov 18 01:29:05 2016 >>> app-admin/rsyslog-8.22.0
Fri Nov 18 01:29:32 2016 >>> app-text/xmlto-0.0.28-r1
Fri Nov 18 01:33:04 2016 >>> sys-apps/dbus-1.10.12
Fri Nov 18 01:34:02 2016 >>> gnome-base/dconf-0.26.0-r1
Fri Nov 18 01:35:37 2016 >>> app-accessibility/at-spi2-core-2.22.0
Fri Nov 18 01:36:39 2016 >>> app-accessibility/at-spi2-atk-2.22.0
Fri Nov 18 01:57:28 2016 >>> x11-libs/gtk+-3.22.3
Fri Nov 18 02:00:08 2016 >>> sys-fs/eudev-3.2
Fri Nov 18 02:02:19 2016 >>> sys-auth/polkit-0.113-r1
Fri Nov 18 02:04:27 2016 >>> sys-auth/consolekit-1.1.0-r1
Fri Nov 18 02:05:22 2016 >>> gnome-extra/polkit-gnome-0.105-r1
Fri Nov 18 02:05:44 2016 >>> sys-auth/pambase-20150213
Fri Nov 18 03:19:12 2016 >>> sys-devel/bc-1.06.95-r2
Fri Nov 18 03:25:19 2016 >>> sys-kernel/gentoo-sources-4.8.8
Fri Nov 18 08:26:48 2016 >>> sys-apps/pciutils-3.5.2
Fri Nov 18 09:59:57 2016 >>> app-shells/ksh-93.20160110
Fri Nov 18 21:25:36 2016 >>> sys-libs/mtdev-1.1.5
Fri Nov 18 21:32:30 2016 >>> sys-power/iasl-20160729
Fri Nov 18 21:33:00 2016 >>> x11-base/xorg-drivers-1.18-r1
Fri Nov 18 21:33:32 2016 >>> virtual/linux-sources-1
Fri Nov 18 21:36:00 2016 >>> dev-lang/yasm-1.3.0
Fri Nov 18 21:46:51 2016 >>> dev-util/kbuild-0.1.9998_pre20131130-r1
Fri Nov 18 21:48:30 2016 >>> x11-proto/fontsproto-2.1.3
Fri Nov 18 21:50:19 2016 >>> x11-proto/scrnsaverproto-1.2.2-r1
Fri Nov 18 21:51:43 2016 >>> x11-proto/resourceproto-1.2.0
Fri Nov 18 21:53:11 2016 >>> x11-proto/xineramaproto-1.2.1-r1
Fri Nov 18 21:55:50 2016 >>> dev-libs/libevdev-1.5.4
Fri Nov 18 21:58:18 2016 >>> x11-libs/libxkbfile-1.0.9
Fri Nov 18 22:00:15 2016 >>> x11-apps/xkbcomp-1.3.1
Fri Nov 18 22:02:00 2016 >>> x11-apps/rgb-1.0.6
Fri Nov 18 22:03:08 2016 >>> x11-proto/xf86rushproto-1.1.2-r1
Fri Nov 18 22:04:51 2016 >>> x11-apps/iceauth-1.0.7
Fri Nov 18 22:08:43 2016 >>> x11-libs/libXfont-1.5.2
Fri Nov 18 22:10:24 2016 >>> x11-proto/xcmiscproto-1.2.2
Fri Nov 18 22:12:04 2016 >>> x11-proto/bigreqsproto-1.1.2
Fri Nov 18 22:13:35 2016 >>> x11-proto/xf86dgaproto-2.1-r2
Fri Nov 18 22:15:21 2016 >>> x11-proto/videoproto-2.3.3
Fri Nov 18 22:16:40 2016 >>> x11-misc/xbitmaps-1.1.1
Fri Nov 18 22:17:49 2016 >>> x11-proto/trapproto-3.4.3
Fri Nov 18 22:20:25 2016 >>> x11-libs/libpciaccess-0.13.4
Fri Nov 18 22:22:55 2016 >>> x11-misc/xkeyboard-config-2.19
Fri Nov 18 22:24:43 2016 >>> x11-apps/xrdb-1.1.0
Fri Nov 18 22:26:33 2016 >>> x11-apps/xinit-1.3.4-r1
Fri Nov 18 22:52:52 2016 >>> x11-base/xorg-server-1.18.4
Fri Nov 18 22:55:09 2016 >>> x11-drivers/xf86-input-mouse-1.9.1
Fri Nov 18 22:57:47 2016 >>> x11-drivers/xf86-input-evdev-2.10.4
Fri Nov 18 23:23:10 2016 >>> x11-drivers/xf86-video-virtualbox-5.1.8
Fri Nov 18 23:25:24 2016 >>> x11-drivers/xf86-input-keyboard-1.8.1
Sat Nov 19 01:09:30 2016 >>> virtual/mta-1
Sat Nov 19 01:12:07 2016 >>> app-editors/nano-2.7.1
Sat Nov 19 01:22:47 2016 >>> app-admin/sudo-1.8.18_p1
Sat Nov 19 02:33:57 2016 >>> sys-apps/sandbox-2.10-r2
Sat Nov 19 02:39:22 2016 >>> mail-client/mutt-1.7.1-r4
Sat Nov 19 03:20:00 2016 >>> x11-base/xorg-server-1.18.4
Sat Nov 19 07:27:30 2016 >>> dev-python/pyxattr-0.5.5
Sat Nov 19 07:37:41 2016 >>> dev-libs/libxml2-2.9.4
Sat Nov 19 07:59:51 2016 >>> sys-libs/readline-7.0_p1
Sat Nov 19 08:08:12 2016 >>> net-misc/wget-1.18
Sat Nov 19 08:14:31 2016 >>> sys-apps/grep-2.26
Sat Nov 19 08:21:29 2016 >>> sys-apps/diffutils-3.5
Sat Nov 19 08:27:07 2016 >>> app-portage/eix-0.32.1-r1
Sat Nov 19 08:28:48 2016 >>> sys-devel/automake-1.13.4-r1
Sat Nov 19 08:38:38 2016 >>> app-admin/rsyslog-8.23.0
Sat Nov 19 08:48:52 2016 >>> app-text/opensp-1.5.2-r4
Sat Nov 19 08:50:24 2016 >>> dev-python/pygments-2.1.3
Sat Nov 19 08:54:45 2016 >>> dev-python/docutils-0.12-r1
Sat Nov 19 08:57:44 2016 >>> dev-util/ctags-20161028
Sat Nov 19 09:00:33 2016 >>> x11-libs/libXpm-3.5.11
Sat Nov 19 09:03:46 2016 >>> x11-libs/libXaw-1.0.13
Sat Nov 19 09:14:03 2016 >>> sys-apps/groff-1.22.3
Sat Nov 19 09:16:32 2016 >>> x11-drivers/xf86-input-keyboard-1.9.0
Sat Nov 19 09:19:04 2016 >>> x11-drivers/xf86-input-mouse-1.9.2
Sat Nov 19 09:26:07 2016 >>> sys-apps/shadow-4.2.1-r2
Sat Nov 19 09:35:18 2016 >>> net-misc/openssh-7.3_p1-r7
Sat Nov 19 10:12:26 2016 >>> sys-apps/portage-2.3.2
Sat Nov 19 10:22:01 2016 >>> www-client/lynx-2.8.9_pre9
Sat Nov 19 10:42:30 2016 >>> media-libs/libogg-1.3.2
Sat Nov 19 10:44:27 2016 >>> dev-libs/libyaml-0.1.7
Sat Nov 19 10:46:51 2016 >>> media-libs/giflib-5.1.4
Sat Nov 19 10:47:37 2016 >>> app-text/docbook-dsssl-stylesheets-1.79
Sat Nov 19 10:48:21 2016 >>> app-dicts/myspell-en-20160901
Sat Nov 19 10:48:59 2016 >>> app-text/docbook-sgml-dtd-3.0-r3
Sat Nov 19 10:49:45 2016 >>> sys-apps/paxctl-0.9
Sat Nov 19 10:53:26 2016 >>> dev-util/ragel-6.9
Sat Nov 19 10:57:32 2016 >>> dev-lang/orc-0.4.26-r1
Sat Nov 19 10:57:59 2016 >>> app-eselect/eselect-ruby-20151229
Sat Nov 19 10:59:00 2016 >>> app-eselect/eselect-lib-bin-symlink-0.1.1
Sat Nov 19 10:59:27 2016 >>> app-eselect/eselect-notify-send-0.1
Sat Nov 19 11:03:12 2016 >>> dev-db/sqlite-3.15.1
Sat Nov 19 11:04:17 2016 >>> dev-util/itstool-2.0.2
Sat Nov 19 11:09:28 2016 >>> app-text/hunspell-1.4.2
Sat Nov 19 11:10:47 2016 >>> app-text/iso-codes-3.70
Sat Nov 19 11:13:09 2016 >>> sys-apps/mlocate-0.26-r1
Sat Nov 19 11:13:31 2016 >>> virtual/awk-1
Sat Nov 19 11:15:00 2016 >>> dev-libs/hyphen-2.8.8
Sat Nov 19 11:15:43 2016 >>> virtual/opengl-7.0-r1
Sat Nov 19 11:20:07 2016 >>> media-libs/glu-9.0.0-r1
Sat Nov 19 11:20:49 2016 >>> virtual/glu-9.0-r1
Sat Nov 19 11:35:19 2016 >>> dev-libs/icu-58.1-r1
Sat Nov 19 11:38:43 2016 >>> app-text/enchant-1.6.0
Sat Nov 19 11:41:15 2016 >>> x11-libs/libXv-1.0.11
Sat Nov 19 11:44:38 2016 >>> media-libs/libvorbis-1.3.5
Sat Nov 19 11:51:39 2016 >>> app-crypt/p11-kit-0.23.2
Sat Nov 19 11:54:01 2016 >>> media-libs/freeglut-3.0.0
Sat Nov 19 11:55:34 2016 >>> gnome-extra/yelp-xsl-3.20.1
Sat Nov 19 11:57:16 2016 >>> net-libs/libproxy-0.4.13-r1
Sat Nov 19 12:07:01 2016 >>> dev-lang/vala-0.34.2
Sat Nov 19 12:11:57 2016 >>> media-libs/harfbuzz-1.3.3
Sat Nov 19 12:25:13 2016 >>> media-libs/gstreamer-1.8.3
Sat Nov 19 12:31:30 2016 >>> media-libs/libwebp-0.5.1
Sat Nov 19 12:33:41 2016 >>> gnome-base/gsettings-desktop-schemas-3.22.0
Sat Nov 19 12:34:55 2016 >>> app-text/yelp-tools-3.18.0
Sat Nov 19 12:38:17 2016 >>> net-libs/glib-networking-2.50.0
Sat Nov 19 12:58:22 2016 >>> x11-themes/gnome-themes-standard-3.22.2
Sat Nov 19 13:05:21 2016 >>> net-libs/libsoup-2.56.0
Sat Nov 19 13:20:44 2016 >>> media-libs/gst-plugins-base-1.8.3-r1
Sat Nov 19 13:37:37 2016 >>> dev-lang/ruby-2.1.10
Sat Nov 19 13:54:08 2016 >>> dev-lang/ruby-2.0.0_p648
Sat Nov 19 13:56:00 2016 >>> dev-ruby/rubygems-2.6.8
Sat Nov 19 13:56:57 2016 >>> virtual/rubygems-11
Sat Nov 19 13:58:16 2016 >>> dev-ruby/rake-11.3.0
Sat Nov 19 13:59:43 2016 >>> dev-ruby/json-2.0.2
Sat Nov 19 14:01:06 2016 >>> dev-ruby/racc-1.4.14
Sat Nov 19 14:02:31 2016 >>> dev-ruby/json-1.8.3
Sat Nov 19 14:04:26 2016 >>> dev-ruby/rdoc-4.3.0
Sat Nov 19 14:06:29 2016 >>> x11-libs/libnotify-0.7.7
Sat Nov 19 14:08:53 2016 >>> x11-misc/notification-daemon-3.20.0
Sat Nov 19 14:09:19 2016 >>> virtual/notification-daemon-0
Sat Nov 19 14:10:03 2016 >>> app-text/docbook-xml-dtd-4.3-r1
Sat Nov 19 14:27:17 2016 >>> app-crypt/gcr-3.20.0
Sat Nov 19 14:48:35 2016 >>> media-libs/gst-plugins-bad-1.8.3
Sat Nov 19 14:52:43 2016 >>> dev-libs/json-glib-1.2.2
Sat Nov 19 14:54:57 2016 >>> dev-libs/libgudev-230-r1
Sat Nov 19 14:55:41 2016 >>> virtual/libgudev-230
Sat Nov 19 14:59:02 2016 >>> dev-util/gtk-doc-1.25-r1
Sat Nov 19 15:02:12 2016 >>> net-libs/libmbim-1.14.0
Sat Nov 19 15:06:29 2016 >>> net-libs/libqmi-1.16.2
Sat Nov 19 15:30:56 2016 >>> x11-libs/gtk+-2.24.31-r1
Sat Nov 19 15:32:54 2016 >>> x11-themes/gtk-engines-adwaita-3.20.2
Sat Nov 19 15:43:41 2016 >>> net-misc/modemmanager-1.6.2
Sat Nov 19 15:49:11 2016 >>> app-misc/geoclue-2.4.4
Sat Nov 19 21:51:31 2016 >>> dev-qt/qtchooser-0_p20151008
Sat Nov 19 21:53:52 2016 >>> dev-libs/npth-1.2
Sat Nov 19 21:57:19 2016 >>> media-libs/lcms-2.8
Sat Nov 19 22:00:43 2016 >>> media-libs/libmng-2.0.3
Sat Nov 19 22:03:19 2016 >>> dev-libs/libassuan-2.4.3
Sat Nov 19 22:05:54 2016 >>> dev-libs/libksba-1.3.5-r1
Sat Nov 19 22:06:21 2016 >>> virtual/perl-Digest-SHA-5.950.0-r1
Sat Nov 19 22:06:49 2016 >>> virtual/perl-Digest-MD5-2.540.0-r1
Sat Nov 19 22:07:16 2016 >>> virtual/perl-MIME-Base64-3.150.0-r1
Sat Nov 19 22:07:43 2016 >>> virtual/perl-libnet-3.80.0
Sat Nov 19 22:09:04 2016 >>> dev-perl/Net-SSLeay-1.720.0-r1
Sat Nov 19 22:10:00 2016 >>> dev-perl/Digest-HMAC-1.30.0-r1
Sat Nov 19 22:10:45 2016 >>> perl-core/Scalar-List-Utils-1.460.0
Sat Nov 19 22:11:13 2016 >>> virtual/perl-Scalar-List-Utils-1.460.0
Sat Nov 19 22:12:24 2016 >>> dev-perl/Authen-SASL-2.160.0-r1
Sat Nov 19 22:13:18 2016 >>> dev-perl/Error-0.170.240
Sat Nov 19 22:14:12 2016 >>> dev-perl/IO-Socket-SSL-2.24.0
Sat Nov 19 22:15:03 2016 >>> dev-perl/Net-SMTP-SSL-1.30.0
Sat Nov 19 22:15:29 2016 >>> app-eselect/eselect-qtgraphicssystem-1.1.1
Sat Nov 19 22:15:54 2016 >>> app-eselect/eselect-pinentry-0.7
Sat Nov 19 22:17:53 2016 >>> dev-vcs/mercurial-4.0
Sat Nov 19 22:19:11 2016 >>> dev-python/six-1.10.0
Sat Nov 19 22:20:31 2016 >>> dev-python/pyasn1-0.1.9
Sat Nov 19 22:21:48 2016 >>> dev-python/idna-2.1
Sat Nov 19 22:22:54 2016 >>> dev-python/enum34-1.1.6
Sat Nov 19 22:24:05 2016 >>> dev-python/ply-3.9
Sat Nov 19 22:37:15 2016 >>> dev-python/numpy-1.11.2-r1
Sat Nov 19 22:38:17 2016 >>> dev-python/ipaddress-1.0.17
Sat Nov 19 22:39:31 2016 >>> dev-python/pycparser-2.17
Sat Nov 19 22:40:19 2016 >>> virtual/python-ipaddress-1.0
Sat Nov 19 22:41:46 2016 >>> dev-python/cffi-1.8.3
Sat Nov 19 22:44:31 2016 >>> dev-python/cryptography-1.5.3-r1
Sat Nov 19 22:45:45 2016 >>> dev-python/paramiko-2.0.2
Sat Nov 19 22:48:19 2016 >>> dev-vcs/bzr-2.6.0
Sat Nov 19 22:51:26 2016 >>> x11-libs/xpyb-1.3.1-r3
Sat Nov 19 22:55:51 2016 >>> dev-python/pygobject-2.28.6-r55
Sat Nov 19 22:57:31 2016 >>> dev-python/pycairo-1.10.0-r5
Sat Nov 19 23:01:33 2016 >>> x11-libs/gtksourceview-2.10.5-r3
Sat Nov 19 23:06:16 2016 >>> gnome-base/libglade-2.6.4-r2
Sat Nov 19 23:12:41 2016 >>> dev-python/pygtk-2.24.0-r4
Sat Nov 19 23:15:23 2016 >>> dev-python/pygtksourceview-2.10.1-r1
Sat Nov 19 23:51:06 2016 >>> dev-qt/qtcore-4.8.7-r2
Sat Nov 19 23:53:38 2016 >>> dev-qt/qttranslations-4.8.7
Sun Nov 20 00:14:07 2016 >>> dev-qt/qtscript-4.8.7
Sun Nov 20 00:59:30 2016 >>> dev-qt/qtgui-4.8.7
Sun Nov 20 01:11:22 2016 >>> dev-qt/qtsql-4.8.7-r1
Sun Nov 20 01:33:02 2016 >>> dev-qt/qt3support-4.8.7
Sun Nov 20 01:35:53 2016 >>> app-crypt/pinentry-0.9.7-r1
Sun Nov 20 01:38:22 2016 >>> dev-libs/libusb-1.0.21
Sun Nov 20 01:39:10 2016 >>> virtual/libusb-1-r2
Sun Nov 20 01:41:03 2016 >>> dev-libs/libusb-compat-0.1.5-r3
Sun Nov 20 01:41:49 2016 >>> virtual/libusb-0-r2
Sun Nov 20 07:31:06 2016 >>> dev-libs/pth-2.0.7-r3
Sun Nov 20 07:38:14 2016 >>> app-crypt/gnupg-2.0.28
Sun Nov 20 08:59:20 2016 >>> dev-libs/libgpg-error-1.25
Sun Nov 20 09:06:23 2016 >>> app-crypt/gnupg-2.1.16
Sun Nov 20 09:15:05 2016 >>> dev-vcs/git-2.11.0_rc2
Sun Nov 20 09:22:31 2016 >>> sys-kernel/gentoo-sources-4.8.9
Sun Nov 20 17:52:32 2016 >>> net-libs/webkit-gtk-2.4.11-r200
Sun Nov 20 17:53:48 2016 >>> www-client/vimb-2.11
Sun Nov 20 18:20:00 2016 >>> virtual/perl-Term-ANSIColor-4.40.0
Sun Nov 20 18:20:27 2016 >>> virtual/perl-IO-1.360.0
Sun Nov 20 18:20:58 2016 >>> virtual/perl-Memoize-1.30.0-r3
Sun Nov 20 18:21:25 2016 >>> virtual/perl-File-Path-2.120.100_rc
Sun Nov 20 18:22:08 2016 >>> dev-perl/YAML-1.190.0
Sun Nov 20 18:22:56 2016 >>> dev-perl/Log-Agent-1.1.0
Sun Nov 20 18:27:02 2016 >>> dev-perl/Class-MethodMaker-2.240.0
Sun Nov 20 18:27:59 2016 >>> dev-perl/Shell-EnvImporter-1.70.0-r2
Sun Nov 20 18:28:43 2016 >>> app-portage/g-cpan-0.16.9
Sun Nov 20 18:32:57 2016 >>> dev-perl/File-Which-1.90.0-r1
Sun Nov 20 19:51:18 2016 >>> sys-apps/lsb-release-1.4-r3
Sun Nov 20 19:51:47 2016 >>> app-eselect/eselect-cdparanoia-0.1
Sun Nov 20 19:53:09 2016 >>> lxde-base/lxmenu-data-0.1.5
Sun Nov 20 19:55:23 2016 >>> x11-libs/xcb-util-renderutil-0.3.9-r1
Sun Nov 20 19:57:53 2016 >>> x11-libs/libfm-extra-1.2.4
Sun Nov 20 20:00:08 2016 >>> x11-libs/libXinerama-1.1.3
Sun Nov 20 20:02:24 2016 >>> x11-libs/xcb-util-wm-0.4.1-r1
Sun Nov 20 20:04:35 2016 >>> x11-libs/xcb-util-keysyms-0.4.0
Sun Nov 20 20:06:15 2016 >>> x11-apps/xrandr-1.5.0
Sun Nov 20 20:08:41 2016 >>> media-libs/libexif-0.6.21-r1
Sun Nov 20 20:14:15 2016 >>> dev-libs/libcdio-0.94-r1
Sun Nov 20 20:16:22 2016 >>> x11-libs/libXres-1.0.7
Sun Nov 20 20:17:47 2016 >>> lxde-base/menu-cache-1.0.2
Sun Nov 20 20:19:34 2016 >>> x11-libs/gnome-pty-helper-0.40.2
Sun Nov 20 20:25:45 2016 >>> sys-apps/keyutils-1.5.9-r2
Sun Nov 20 20:29:27 2016 >>> dev-libs/libevent-2.1.5-r4
Sun Nov 20 20:31:53 2016 >>> net-libs/libnfsidmap-0.25-r1
Sun Nov 20 20:34:25 2016 >>> net-libs/libtirpc-1.0.1
Sun Nov 20 20:35:43 2016 >>> net-nds/rpcbind-0.2.3-r2
Sun Nov 20 20:41:14 2016 >>> net-fs/nfs-utils-1.3.4
Wed Nov 30 23:22:46 2016 >>> net-dns/bind-tools-9.11.0_p1
Wed Nov 30 23:44:08 2016 >>> dev-libs/npth-1.3
Wed Nov 30 23:45:15 2016 >>> sys-devel/bin86-0.16.21
Wed Nov 30 23:46:36 2016 >>> sys-libs/timezone-data-2016j
Wed Nov 30 23:47:38 2016 >>> dev-libs/vala-common-0.34.3
Thu Dec 1 00:01:22 2016 >>> sys-apps/coreutils-8.26
Thu Dec 1 00:02:17 2016 >>> app-portage/portage-utils-0.64
Thu Dec 1 00:21:36 2016 >>> dev-lang/perl-5.24.1_rc4
Thu Dec 1 00:22:06 2016 >>> virtual/perl-ExtUtils-MakeMaker-7.100.200_rc
Thu Dec 1 00:22:36 2016 >>> virtual/perl-Test-Harness-3.360.100_rc
Thu Dec 1 00:23:06 2016 >>> virtual/perl-File-Spec-3.630.100_rc
Thu Dec 1 00:23:36 2016 >>> virtual/perl-Data-Dumper-2.160.0-r1
Thu Dec 1 00:24:06 2016 >>> virtual/perl-CPAN-Meta-YAML-0.18.0-r1
Thu Dec 1 00:24:36 2016 >>> virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc
Thu Dec 1 00:25:05 2016 >>> virtual/perl-Digest-SHA-5.950.100_rc
Thu Dec 1 00:25:35 2016 >>> virtual/perl-Digest-MD5-2.540.0-r2
Thu Dec 1 00:26:05 2016 >>> virtual/perl-version-0.991.600-r1
Thu Dec 1 00:26:35 2016 >>> virtual/perl-podlators-4.70.0-r1
Thu Dec 1 00:27:05 2016 >>> virtual/perl-Text-ParseWords-3.300.0-r2
Thu Dec 1 00:27:35 2016 >>> virtual/perl-Perl-OSType-1.9.0-r1
Thu Dec 1 00:28:05 2016 >>> virtual/perl-Module-Metadata-1.0.31-r1
Thu Dec 1 00:28:35 2016 >>> virtual/perl-Getopt-Long-2.480.0-r1
Thu Dec 1 00:29:06 2016 >>> virtual/perl-ExtUtils-ParseXS-3.310.0-r1
Thu Dec 1 00:29:36 2016 >>> virtual/perl-ExtUtils-Manifest-1.700.0-r3
Thu Dec 1 00:30:06 2016 >>> virtual/perl-ExtUtils-Install-2.40.0-r2
Thu Dec 1 00:30:36 2016 >>> virtual/perl-ExtUtils-CBuilder-0.280.225-r1
Thu Dec 1 00:31:06 2016 >>> virtual/perl-JSON-PP-2.273.0.100_rc
Thu Dec 1 00:31:36 2016 >>> virtual/perl-MIME-Base64-3.150.0-r2
Thu Dec 1 00:32:06 2016 >>> virtual/perl-libnet-3.80.100_rc
Thu Dec 1 00:32:36 2016 >>> virtual/perl-Term-ANSIColor-4.40.0-r1
Thu Dec 1 00:33:06 2016 >>> virtual/perl-IO-1.360.100_rc
Thu Dec 1 00:33:36 2016 >>> virtual/perl-Memoize-1.30.100_rc
Thu Dec 1 00:34:07 2016 >>> virtual/perl-File-Path-2.120.100_rc-r1
Thu Dec 1 00:34:37 2016 >>> virtual/perl-File-Temp-0.230.400-r5
Thu Dec 1 00:35:07 2016 >>> virtual/perl-CPAN-Meta-2.150.5-r1
Thu Dec 1 00:35:37 2016 >>> virtual/perl-Scalar-List-Utils-1.460.0-r1
Thu Dec 1 00:36:27 2016 >>> dev-perl/IO-Socket-SSL-2.39.0
Thu Dec 1 00:42:20 2016 >>> media-libs/tiff-4.0.7
Thu Dec 1 00:46:29 2016 >>> app-editors/vim-core-8.0.0106
Thu Dec 1 00:51:55 2016 >>> mail-client/mutt-1.7.1-r5
Thu Dec 1 00:58:34 2016 >>> app-shells/bash-4.4_p5-r1
Thu Dec 1 01:04:56 2016 >>> sys-kernel/gentoo-sources-4.8.7
Thu Dec 1 01:06:28 2016 >>> dev-python/ipaddress-1.0.17-r1
Thu Dec 1 01:07:26 2016 >>> virtual/python-ipaddress-1.0-r1
Thu Dec 1 01:09:06 2016 >>> dev-python/cffi-1.9.1
Thu Dec 1 01:12:19 2016 >>> dev-python/cryptography-1.6
Thu Dec 1 03:25:01 2016 >>> media-libs/mesa-13.0.2
Thu Dec 1 03:43:01 2016 >>> dev-util/cmake-3.7.0-r1
Thu Dec 1 03:44:43 2016 >>> x11-apps/xrefresh-1.0.5
Thu Dec 1 03:46:57 2016 >>> media-gfx/graphite2-1.3.9
Thu Dec 1 03:52:40 2016 >>> app-editors/vim-8.0.0106
Thu Dec 1 04:01:07 2016 >>> sys-apps/dbus-1.10.14
Thu Dec 1 09:09:21 2016 >>> x11-libs/gtk+-3.22.4
Thu Dec 1 09:12:16 2016 >>> app-crypt/pinentry-1.0.0
Thu Dec 1 09:21:42 2016 >>> dev-vcs/git-2.11.0
Thu Dec 1 09:46:47 2016 >>> x11-drivers/xf86-video-virtualbox-5.1.10
Thu Dec 1 10:14:00 2016 >>> app-emulation/virtualbox-guest-additions-5.1.10
Thu Dec 1 10:23:01 2016 >>> net-misc/openssh-7.3_p1-r8
Sun Dec 4 08:54:34 2016 >>> net-libs/liblockfile-1.09
Sun Dec 4 08:55:33 2016 >>> app-emacs/emacs-common-gentoo-1.5
Sun Dec 4 08:56:03 2016 >>> app-eselect/eselect-emacs-1.18
Sun Dec 4 09:08:04 2016 >>> app-editors/emacs-25.1
Sun Dec 4 09:08:32 2016 >>> virtual/emacs-25
Sun Dec 4 09:12:28 2016 >>> dev-db/sqlite-3.15.2
Sun Dec 4 09:15:10 2016 >>> app-misc/ca-certificates-20161102.3.27.2-r2
Sun Dec 4 09:17:49 2016 >>> dev-vcs/mercurial-4.0.1
Sun Dec 4 09:36:42 2016 >>> dev-util/cmake-3.7.1
Sun Dec 4 13:39:46 2016 >>> mail-client/mailx-support-20060102-r2
Sun Dec 4 13:40:45 2016 >>> mail-client/mailx-8.1.2.20050715-r7
Mon Dec 5 22:23:55 2016 >>> mail-filter/procmail-3.22-r11
Tue Dec 6 09:23:18 2016 >>> virtual/cron-0-r1
Tue Dec 6 09:25:08 2016 >>> app-admin/logrotate-3.11.0
Tue Dec 6 12:27:48 2016 >>> dev-perl/Text-Unidecode-1.300.0
Tue Dec 6 12:31:09 2016 >>> x11-libs/libdrm-2.4.74
Tue Dec 6 12:35:25 2016 >>> dev-libs/libcdio-paranoia-0.93_p1-r1
Tue Dec 6 13:21:12 2016 >>> dev-scheme/guile-2.0.13-r1
Tue Dec 6 13:30:34 2016 >>> dev-lang/vala-0.34.3
Tue Dec 6 13:35:15 2016 >>> media-libs/harfbuzz-1.3.4
Tue Dec 6 13:37:57 2016 >>> dev-libs/libgee-0.6.8
Tue Dec 6 13:41:25 2016 >>> www-client/w3m-0.5.3-r9
Tue Dec 6 13:41:51 2016 >>> virtual/freedesktop-icon-theme-0-r1
Tue Dec 6 13:44:37 2016 >>> lxde-base/lxde-icon-theme-0.5.1
Tue Dec 6 13:46:20 2016 >>> lxde-base/lxinput-0.3.5
Tue Dec 6 13:48:31 2016 >>> media-gfx/gpicview-0.2.5
Tue Dec 6 13:50:20 2016 >>> lxde-base/lxtask-0.1.7
Tue Dec 6 13:51:59 2016 >>> lxde-base/lxrandr-0.3.1
Tue Dec 6 13:53:45 2016 >>> dev-libs/keybinder-0.3.1-r200
Tue Dec 6 13:59:25 2016 >>> x11-libs/vte-0.28.2-r207
Tue Dec 6 14:00:44 2016 >>> lxde-base/lxde-common-0.99.1
Tue Dec 6 14:02:31 2016 >>> lxde-base/lxterminal-0.2.0-r1
Tue Dec 6 14:04:50 2016 >>> x11-libs/xcb-util-0.4.0
Tue Dec 6 14:07:19 2016 >>> x11-libs/xcb-util-image-0.4.0
Tue Dec 6 14:10:19 2016 >>> x11-libs/xcb-util-cursor-0.1.3-r1
Tue Dec 6 14:12:28 2016 >>> x11-libs/startup-notification-0.12-r1
Tue Dec 6 14:16:37 2016 >>> x11-libs/libwnck-2.31.0
Tue Dec 6 14:17:04 2016 >>> virtual/eject-0
Tue Dec 6 14:19:10 2016 >>> dev-libs/libatasmart-0.19-r2
Tue Dec 6 14:20:21 2016 >>> sys-apps/gptfdisk-1.0.1
Tue Dec 6 14:29:38 2016 >>> sys-block/parted-3.2-r1
Tue Dec 6 14:34:50 2016 >>> x11-wm/openbox-3.6.1
Tue Dec 6 14:36:09 2016 >>> x11-misc/obconf-2.0.4
Tue Dec 6 14:38:56 2016 >>> sys-apps/portage-2.3.3
Tue Dec 6 14:41:47 2016 >>> dev-libs/dbus-glib-0.108
Tue Dec 6 14:43:31 2016 >>> lxde-base/lxappearance-0.6.2
Tue Dec 6 14:46:23 2016 >>> dev-libs/libunique-1.1.6-r2
Tue Dec 6 14:49:12 2016 >>> sys-power/upower-0.99.4
Tue Dec 6 14:55:10 2016 >>> sys-apps/shadow-4.4-r1
Tue Dec 6 14:58:30 2016 >>> lxde-base/lxsession-0.5.2
Tue Dec 6 15:07:40 2016 >>> sys-fs/udisks-2.1.8
Tue Dec 6 15:19:36 2016 >>> gnome-base/gvfs-1.30.2
Tue Dec 6 15:26:02 2016 >>> x11-libs/libfm-1.2.4
Tue Dec 6 15:30:07 2016 >>> lxde-base/lxpanel-0.8.2
Tue Dec 6 15:31:50 2016 >>> x11-misc/pcmanfm-1.2.4
Tue Dec 6 15:32:17 2016 >>> lxde-base/lxde-meta-0.5.5-r5
Tue Dec 6 19:38:01 2016 >>> app-text/poppler-data-0.4.7
Tue Dec 6 19:45:55 2016 >>> app-arch/cpio-2.12-r1
Tue Dec 6 19:46:31 2016 >>> app-arch/rpm2targz-9.0.0.5g
Tue Dec 6 19:48:19 2016 >>> media-libs/jbig2dec-0.13
Tue Dec 6 19:49:14 2016 >>> media-fonts/urw-fonts-2.4.9
Tue Dec 6 19:50:07 2016 >>> dev-perl/Net-CIDR-Lite-0.210.0
Tue Dec 6 19:50:51 2016 >>> dev-perl/Crypt-OpenSSL-Bignum-0.60.0
Tue Dec 6 19:51:33 2016 >>> dev-perl/Crypt-OpenSSL-Random-0.110.0
Tue Dec 6 19:52:34 2016 >>> dev-perl/TimeDate-2.300.0
Tue Dec 6 19:53:27 2016 >>> dev-perl/HTML-Tagset-3.200.0-r1
Tue Dec 6 19:53:54 2016 >>> virtual/perl-XSLoader-0.210.0-r1
Tue Dec 6 19:54:20 2016 >>> virtual/perl-Digest-1.170.100_rc
Tue Dec 6 19:54:47 2016 >>> virtual/perl-Time-Local-1.230.0-r4
Tue Dec 6 19:55:15 2016 >>> virtual/perl-parent-0.234.0-r1
Tue Dec 6 19:55:41 2016 >>> virtual/perl-Exporter-5.720.0-r2
Tue Dec 6 19:56:09 2016 >>> virtual/perl-DB_File-1.835.0-r2
Tue Dec 6 19:56:36 2016 >>> virtual/perl-Pod-Parser-1.630.0-r2
Tue Dec 6 19:57:03 2016 >>> virtual/perl-Time-HiRes-1.973.300-r1
Tue Dec 6 19:57:31 2016 >>> virtual/perl-IO-Zlib-1.100.0-r8
Tue Dec 6 19:57:57 2016 >>> virtual/perl-Archive-Tar-2.40.100_rc
Tue Dec 6 19:59:48 2016 >>> dev-perl/NetAddr-IP-4.78.0
Tue Dec 6 20:00:32 2016 >>> dev-perl/HTML-Parser-3.720.0
Tue Dec 6 20:01:27 2016 >>> dev-perl/Digest-SHA1-2.130.0-r1
Tue Dec 6 20:02:24 2016 >>> dev-perl/Net-Patricia-1.220.0
Tue Dec 6 20:03:16 2016 >>> dev-perl/HTTP-Date-6.20.0-r1
Tue Dec 6 20:04:17 2016 >>> dev-perl/MailTools-2.140.0
Tue Dec 6 20:05:14 2016 >>> dev-perl/Crypt-OpenSSL-RSA-0.280.0-r2
Tue Dec 6 20:06:17 2016 >>> dev-perl/Net-DNS-1.40.0
Tue Dec 6 20:07:20 2016 >>> dev-perl/Encode-Detect-1.10.0-r1
Tue Dec 6 20:08:19 2016 >>> dev-perl/Mail-DKIM-0.400.0
Tue Dec 6 20:09:12 2016 >>> dev-perl/Net-DNS-Resolver-Programmable-0.3.0-r1
Tue Dec 6 20:10:01 2016 >>> dev-perl/URI-1.710.0
Tue Dec 6 20:11:04 2016 >>> dev-perl/Mail-SPF-2.9.0-r1
Tue Dec 6 20:13:34 2016 >>> app-text/libpaper-1.1.24-r2
Tue Dec 6 20:16:48 2016 >>> dev-libs/geoip-1.6.9
Tue Dec 6 20:17:45 2016 >>> dev-perl/Geo-IP-1.500.0
Tue Dec 6 20:20:40 2016 >>> dev-libs/libevdev-1.5.5
Tue Dec 6 20:24:34 2016 >>> net-mail/fetchmail-6.3.26-r2
Tue Dec 6 20:25:16 2016 >>> app-text/docbook-xml-dtd-4.5-r1
Tue Dec 6 20:26:24 2016 >>> app-text/asciidoc-8.6.9-r3
Tue Dec 6 20:51:00 2016 >>> app-text/ghostscript-gpl-9.19
Tue Dec 6 21:03:21 2016 >>> app-doc/doxygen-1.8.12
Tue Dec 6 21:30:06 2016 >>> x11-base/xorg-server-1.18.4
Tue Dec 6 21:32:32 2016 >>> mail-filter/spamassassin-3.4.1-r8
Tue Dec 6 22:25:57 2016 >>> virtual/perl-Memoize-1.30.100_rc-r1
Tue Dec 6 22:26:35 2016 >>> virtual/perl-Digest-SHA-5.950.100_rc-r1
Tue Dec 6 22:27:05 2016 >>> virtual/perl-Digest-1.170.100_rc-r1
Tue Dec 6 22:27:35 2016 >>> virtual/perl-JSON-PP-2.273.0.100_rc-r1
Tue Dec 6 22:28:06 2016 >>> virtual/perl-Archive-Tar-2.40.100_rc-r1
Tue Dec 6 22:28:54 2016 >>> dev-perl/YAML-1.200.0
Tue Dec 6 22:34:23 2016 >>> mail-client/mutt-1.7.2
Tue Dec 6 22:41:18 2016 >>> x11-wm/openbox-3.6.1
Tue Dec 6 22:44:05 2016 >>> lxde-base/lxdm-0.5.3
Tue Dec 6 22:47:33 2016 >>> lxde-base/lxsession-0.5.2
Tue Dec 6 22:51:36 2016 >>> lxde-base/lxpanel-0.8.2
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [gentoo-user] newish vbox gentoo guest crashes from startx
2016-12-07 15:34 [gentoo-user] newish vbox gentoo guest crashes from startx Harry Putnam
@ 2016-12-07 15:48 ` Alan McKinnon
2016-12-08 0:26 ` [gentoo-user] " Harry Putnam
0 siblings, 1 reply; 8+ messages in thread
From: Alan McKinnon @ 2016-12-07 15:48 UTC (permalink / raw
To: gentoo-user
On 07/12/2016 17:34, Harry Putnam wrote:
> Setup:
>
> gentoo 32bit vbox guest on win 10 64bit host
> Installed xorg-server, lxde Meta pkgs and deps
> (along with many other pkgs ... to many to list
> here but included at the end)
>
> uname -a:
> Linux g0 4.8.8-gentoo #2 Fri Nov 18 20:16:14 EST 2016 i686 Intel(R)
> Xeon(R) CPU X5450 @ 3.00GHz GenuineIntel GNU/Linux
>
> Theoretically the install should be ready now to run X and lxde.
> However, when I run `startlxde' nothing whatsoever happens. At least
> not at the command line or visibly. Prompt just returns lamely.
>
> However, if I run startx. The vm crashes clear to power off or
> sometimes just becomes inoperable with these error messages showing.
> (Note: nothing can be clicked moved or etc at this point)
Your first problem seems to be you don't have any input or output
devices. Please post
- eix xorg-server
- values of INPUT_DEVICES and VIDEO_CARDS from make.conf
- confirm that you built the kernel with evdev and the kernel module is
loaded
There's a decent X11 install page on the gentoo wiki, did you follow it?
Installing on vbox is not too different from installing on metal except
you don't use the video driver for the physical card, you use the vbox
one (it's virtualized).
Lastly, why a 32 bit guest on a 64 bit host? There's little benefit from
doing that, and amd64 is far better supported in general than x86_64.
Plus you just create more work for the host.
Alan
>
>
>
>
> I'm having trouble figuring out where to start to get a handle on
> this.
>
> This is not my first time installing gentoo in a vbox vm... I've done
> several over time and two just of late. Although the installs were
> not trouble free, I had none of this sort of trouble.
>
> Posting /var/log/Xorg.0.log which shows several modules not loading.
> vesa and fbdev... but checking my kernel compile I see both were
> selected for. Other parts I'm not sure what they might mean.
>
> Also included below is last 175 lines of a debug.log I have setup in
> rsyslog.
>
> I can't tell how many lines to include so just a shot in the dark.
> There are a number of lines about Vbox not recognizing symbols
>
> And finally a full listing of everthing that has been installed. Which
> runs to 650+ lines. So massive amount of data... which seems
> .. unavoidable. I've labeled each between these:
> ------- ------- ---=--- ------- -------
> LABEL
> ------- ------- ---=--- ------- -------
>
> Labels are:
>
> Xorg.0.log
> tail_of_debug.log
> installed_pkgs_list.txt
>
> Hopefull will make jumping around a bit easier if anyone even gets
> that far.
>
> ------- ------- ---=--- ------- -------
> Xorg.0.log
> ------- ------- ---=--- ------- -------
> [ 1215.250]
> X.Org X Server 1.18.4
> Release Date: 2016-07-19
> [ 1215.262] X Protocol Version 11, Revision 0
> [ 1215.266] Build Operating System: Linux 4.8.8-gentoo i686 Gentoo
> [ 1215.268] Current Operating System: Linux g0 4.8.8-gentoo #2 Fri Nov 18 20:16:14 EST 2016 i686
> [ 1215.268] Kernel command line: root=/dev/sda3 vga=0x31b video=vesfb:mtrr:3,ywrap
> [ 1215.272] Build Date: 06 December 2016 09:05:57PM
> [ 1215.274]
> [ 1215.277] Current version of pixman: 0.34.0
> [ 1215.287] Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> [ 1215.287] Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> [ 1215.295] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 7 10:07:52 2016
> [ 1215.348] (==) Using config directory: "/etc/X11/xorg.conf.d"
> [ 1215.350] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
> [ 1215.371] (==) No Layout section. Using the first Screen section.
> [ 1215.371] (==) No screen section available. Using defaults.
> [ 1215.371] (**) |-->Screen "Default Screen Section" (0)
> [ 1215.371] (**) | |-->Monitor "<default monitor>"
> [ 1215.372] (==) No monitor specified for screen "Default Screen Section".
> Using a default monitor configuration.
> [ 1215.372] (==) Automatically adding devices
> [ 1215.372] (==) Automatically enabling devices
> [ 1215.372] (==) Automatically adding GPU devices
> [ 1215.373] (==) Max clients allowed: 256, resource mask: 0x1fffff
> [ 1215.385] (WW) The directory "/usr/share/fonts/misc/" does not exist.
> [ 1215.385] Entry deleted from font path.
> [ 1215.385] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
> [ 1215.385] Entry deleted from font path.
> [ 1215.385] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
> [ 1215.385] Entry deleted from font path.
> [ 1215.385] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
> [ 1215.385] Entry deleted from font path.
> [ 1215.385] (WW) The directory "/usr/share/fonts/100dpi/" does not exist.
> [ 1215.385] Entry deleted from font path.
> [ 1215.385] (WW) The directory "/usr/share/fonts/75dpi/" does not exist.
> [ 1215.385] Entry deleted from font path.
> [ 1215.385] (==) FontPath set to:
>
> [ 1215.385] (==) ModulePath set to "/usr/lib/xorg/modules"
> [ 1215.385] (II) The server relies on udev to provide the list of input devices.
> If no devices become available, reconfigure udev or disable AutoAddDevices.
> [ 1215.386] (II) Loader magic: 0x8282620
> [ 1215.386] (II) Module ABI versions:
> [ 1215.386] X.Org ANSI C Emulation: 0.4
> [ 1215.386] X.Org Video Driver: 20.0
> [ 1215.386] X.Org XInput driver : 22.1
> [ 1215.386] X.Org Server Extension : 9.0
> [ 1215.390] (--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ 0xe0000000/33554432, BIOS @ 0x????????/131072
> [ 1215.390] (II) LoadModule: "glx"
> [ 1215.432] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
> [ 1215.522] (II) Module glx: vendor="X.Org Foundation"
> [ 1215.522] compiled for 1.18.4, module version = 1.0.0
> [ 1215.522] ABI class: X.Org Server Extension, version 9.0
> [ 1215.522] (==) AIGLX enabled
> [ 1215.522] (==) Matched vboxvideo as autoconfigured driver 0
> [ 1215.522] (==) Matched modesetting as autoconfigured driver 1
> [ 1215.522] (==) Matched fbdev as autoconfigured driver 2
> [ 1215.522] (==) Matched vesa as autoconfigured driver 3
> [ 1215.522] (==) Assigned the driver to the xf86ConfigLayout
> [ 1215.522] (II) LoadModule: "vboxvideo"
> [ 1215.522] (II) Loading /usr/lib/xorg/modules/drivers/vboxvideo_drv.so
> [ 1215.553] (II) Module vboxvideo: vendor="Oracle Corporation"
> [ 1215.553] compiled for 1.18.0, module version = 1.0.1
> [ 1215.553] Module class: X.Org Video Driver
> [ 1215.553] ABI class: X.Org Video Driver, version 20.0
> [ 1215.553] (**) Load address of symbol "VBOXVIDEO" is 0xb771e060
> [ 1215.554] (II) LoadModule: "modesetting"
> [ 1215.554] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
> [ 1215.569] (II) Module modesetting: vendor="X.Org Foundation"
> [ 1215.569] compiled for 1.18.4, module version = 1.18.4
> [ 1215.569] Module class: X.Org Video Driver
> [ 1215.569] ABI class: X.Org Video Driver, version 20.0
> [ 1215.569] (II) LoadModule: "fbdev"
> [ 1215.570] (WW) Warning, couldn't open module fbdev
> [ 1215.570] (II) UnloadModule: "fbdev"
> [ 1215.570] (II) Unloading fbdev
> [ 1215.570] (EE) Failed to load module "fbdev" (module does not exist, 0)
> [ 1215.570] (II) LoadModule: "vesa"
> [ 1215.570] (WW) Warning, couldn't open module vesa
> [ 1215.570] (II) UnloadModule: "vesa"
> [ 1215.570] (II) Unloading vesa
> [ 1215.570] (EE) Failed to load module "vesa" (module does not exist, 0)
> [ 1215.570] (II) VBoxVideo: guest driver for VirtualBox: vbox
> [ 1215.570] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
> [ 1215.571] (--) using VT number 7
>
> [ 1215.580] (WW) Falling back to old probe method for modesetting
> [ 1215.580] (EE) open /dev/dri/card0: No such file or directory
> [ 1215.580] (II) VBoxVideo(0): VirtualBox guest additions video driver version 5.1.10r112026
> [ 1215.580] (II) Loading sub module "ramdac"
> [ 1215.580] (II) LoadModule: "ramdac"
> [ 1215.580] (II) Module "ramdac" already built-in
> [ 1215.580] (II) Loading sub module "fb"
> [ 1215.580] (II) LoadModule: "fb"
> [ 1215.580] (II) Loading /usr/lib/xorg/modules/libfb.so
> [ 1215.586] (II) Module fb: vendor="X.Org Foundation"
> [ 1215.586] compiled for 1.18.4, module version = 1.0.0
> [ 1215.586] ABI class: X.Org ANSI C Emulation, version 0.4
> [ 1215.586] (II) Loading sub module "shadowfb"
> [ 1215.586] (II) LoadModule: "shadowfb"
> [ 1215.586] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
> [ 1215.601] (II) Module shadowfb: vendor="X.Org Foundation"
> [ 1215.601] compiled for 1.18.4, module version = 1.0.0
> [ 1215.601] ABI class: X.Org ANSI C Emulation, version 0.4
> [ 1215.601] (II) Loading sub module "vgahw"
> [ 1215.601] (II) LoadModule: "vgahw"
> [ 1215.601] (II) Loading /usr/lib/xorg/modules/libvgahw.so
> [ 1215.604] (II) Module vgahw: vendor="X.Org Foundation"
> [ 1215.604] compiled for 1.18.4, module version = 0.1.0
> [ 1215.604] ABI class: X.Org Video Driver, version 20.0
> [ 1215.604] (II) VBoxVideo(0): Creating default Display subsection in Screen section
> "Default Screen Section" for depth/fbbpp 24/32
> [ 1215.604] (==) VBoxVideo(0): Depth 24, (--) framebuffer bpp 32
> [ 1215.604] (--) VBoxVideo(0): Virtual size is 32766x32766 (pitch 32766)
> [ 1215.604] (**) VBoxVideo(0): Built-in mode "800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz
> [ 1215.604] (II) VBoxVideo(0): Modeline "800x600"x0.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz b)
> [ 1215.604] (**) VBoxVideo(0): Built-in mode "800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz
> [ 1215.604] (II) VBoxVideo(0): Modeline "800x600"x0.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz b)
> [ 1215.604] (II) VBoxVideo(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
> [ 1215.604] (==) VBoxVideo(0): RGB weight 888
> [ 1215.604] (==) VBoxVideo(0): Default visual is TrueColor
> [ 1215.604] (==) VBoxVideo(0): Using gamma correction (1.0, 1.0, 1.0)
> [ 1215.604] (==) VBoxVideo(0): DPI set to (96, 96)
> [ 1215.605] (II) UnloadModule: "modesetting"
> [ 1215.605] (II) Unloading modesetting
> [ 1215.605] (--) Depth 24 pixmap format is 32 bpp
> [ 1215.613] (II) VBoxVideo(0): Requested monitor count: 1
> [ 1215.613] (II) VBoxVideo(0): Output VGA-0 has no monitor section
> [ 1215.613] (II) VBoxVideo(0): Output VGA-0 has no monitor section
> [ 1215.613] (II) VBoxVideo(0): EDID for output VGA-0
> [ 1215.613] (II) VBoxVideo(0): Manufacturer: VBX Model: 0 Serial#: 39322400
> [ 1215.613] (II) VBoxVideo(0): Year: 1990 Week: 1
> [ 1215.613] (II) VBoxVideo(0): EDID Version: 1.3
> [ 1215.613] (II) VBoxVideo(0): Digital Display Input
> [ 1215.613] (II) VBoxVideo(0): Indeterminate output size
> [ 1215.613] (II) VBoxVideo(0): Gamma: 2.20
> [ 1215.613] (II) VBoxVideo(0): DPMS capabilities: StandBy Suspend Off
> [ 1215.614] (II) VBoxVideo(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
> [ 1215.614] (II) VBoxVideo(0): Default color space is primary color space
> [ 1215.614] (II) VBoxVideo(0): First detailed timing is preferred mode
> [ 1215.614] (II) VBoxVideo(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
> [ 1215.614] (II) VBoxVideo(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
> [ 1215.614] (II) VBoxVideo(0): Manufacturer's mask: 0
> [ 1215.614] (II) VBoxVideo(0): Supported detailed timing:
> [ 1215.614] (II) VBoxVideo(0): clock: 29.3 MHz Image Size: 0 x 0 mm
> [ 1215.614] (II) VBoxVideo(0): h_active: 800 h_sync: 802 h_sync_end 804 h_blank_end 806 h_border: 0
> [ 1215.614] (II) VBoxVideo(0): v_active: 600 v_sync: 602 v_sync_end 604 v_blanking: 606 v_border: 0
> [ 1215.614] (II) VBoxVideo(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz, PixClock max 1005 MHz
> [ 1215.614] (II) VBoxVideo(0): Monitor name: VBOX monitor
> [ 1215.614] (II) VBoxVideo(0): EDID (in hex):
> [ 1215.614] (II) VBoxVideo(0): 00ffffffffffff005858000020035802
> [ 1215.614] (II) VBoxVideo(0): 0100010380000078eeee91a3544c9926
> [ 1215.614] (II) VBoxVideo(0): 0f505400000001010101010101010101
> [ 1215.614] (II) VBoxVideo(0): 010101010101720b2006305806200202
> [ 1215.614] (II) VBoxVideo(0): 2200000000000000000000fd0000c800
> [ 1215.614] (II) VBoxVideo(0): c864000a202020202020000000fc0056
> [ 1215.615] (II) VBoxVideo(0): 424f58206d6f6e69746f720a00000010
> [ 1215.615] (II) VBoxVideo(0): 000a2020202020202020202020200071
> [ 1215.615] (II) VBoxVideo(0): Printing probed modes for output VGA-0
> [ 1215.615] (II) VBoxVideo(0): Modeline "800x600"x60.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz Pb)
> [ 1215.615] (II) VBoxVideo(0): Modeline "2560x1600"x60.0 247.26 2560 2562 2564 2566 1600 1602 1604 1606 (96.4 kHz b)
> [ 1215.615] (II) VBoxVideo(0): Modeline "2560x1440"x60.0 222.63 2560 2562 2564 2566 1440 1442 1444 1446 (86.8 kHz b)
> [ 1215.615] (II) VBoxVideo(0): Modeline "2048x1536"x60.0 190.04 2048 2050 2052 2054 1536 1538 1540 1542 (92.5 kHz b)
> [ 1215.615] (II) VBoxVideo(0): Modeline "1920x1600"x60.0 185.59 1920 1922 1924 1926 1600 1602 1604 1606 (96.4 kHz b)
> [ 1215.615] (II) VBoxVideo(0): Modeline "1920x1080"x60.0 125.50 1920 1922 1924 1926 1080 1082 1084 1086 (65.2 kHz b)
> [ 1215.615] (II) VBoxVideo(0): Modeline "1600x1200"x60.0 116.21 1600 1602 1604 1606 1200 1202 1204 1206 (72.4 kHz b)
> [ 1215.615] (II) VBoxVideo(0): Modeline "1680x1050"x60.0 106.82 1680 1682 1684 1686 1050 1052 1054 1056 (63.4 kHz b)
> [ 1215.615] (II) VBoxVideo(0): Modeline "1400x1050"x60.0 89.08 1400 1402 1404 1406 1050 1052 1054 1056 (63.4 kHz b)
> [ 1215.615] (II) VBoxVideo(0): Modeline "1280x1024"x60.0 79.47 1280 1282 1284 1286 1024 1026 1028 1030 (61.8 kHz b)
> [ 1215.615] (II) VBoxVideo(0): Modeline "1024x768"x60.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz b)
> [ 1215.615] (II) VBoxVideo(0): Modeline "800x600"x60.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz b)
> [ 1215.615] (II) VBoxVideo(0): Modeline "640x480"x60.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz b)
> [ 1215.615] (II) VBoxVideo(0): Output VGA-0 connected
> [ 1215.615] (II) VBoxVideo(0): Using exact sizes for initial modes
> [ 1215.615] (II) VBoxVideo(0): Output VGA-0 using initial mode 800x600 +0+0
> [ 1215.615] (II) VBoxVideo(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
> [ 1215.615] (II) VBoxVideo(0): RandR 1.2 enabled, ignore the following RandR disabled message.
> [ 1215.619] (==) VBoxVideo(0): DPMS enabled
> [ 1215.620] (--) RandR disabled
> [ 1215.622] (II) AIGLX: Screen 0 is not DRI2 capable
> [ 1215.622] (EE) AIGLX: reverting to software rendering
> [ 1216.314] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
> [ 1216.315] (II) AIGLX: Loaded and initialized swrast
> [ 1216.315] (II) GLX: Initialized DRISWRAST GL provider for screen 0
> [ 1216.315] (II) VBoxVideo(0): Setting screen physical size to 211 x 158
> [ 1216.555] (II) config/udev: Adding input device Power Button (/dev/input/event0)
> [ 1216.555] (**) Power Button: Applying InputClass "evdev keyboard catchall"
> [ 1216.555] (II) LoadModule: "evdev"
> [ 1216.555] (WW) Warning, couldn't open module evdev
> [ 1216.556] (II) UnloadModule: "evdev"
> [ 1216.556] (II) Unloading evdev
> [ 1216.556] (EE) Failed to load module "evdev" (module does not exist, 0)
> [ 1216.556] (EE) No input driver matching `evdev'
> [ 1216.556] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
> [ 1216.556] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
> [ 1216.556] (II) LoadModule: "evdev"
> [ 1216.556] (WW) Warning, couldn't open module evdev
> [ 1216.557] (II) UnloadModule: "evdev"
> [ 1216.557] (II) Unloading evdev
> [ 1216.557] (EE) Failed to load module "evdev" (module does not exist, 0)
> [ 1216.557] (EE) No input driver matching `evdev'
> [ 1216.558] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
> [ 1216.558] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
> [ 1216.558] (II) LoadModule: "evdev"
> [ 1216.558] (WW) Warning, couldn't open module evdev
> [ 1216.558] (II) UnloadModule: "evdev"
> [ 1216.558] (II) Unloading evdev
> [ 1216.558] (EE) Failed to load module "evdev" (module does not exist, 0)
> [ 1216.558] (EE) No input driver matching `evdev'
> [ 1216.559] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/event5)
> [ 1216.559] (**) VirtualBox mouse integration: Applying InputClass "evdev pointer catchall"
> [ 1216.559] (II) LoadModule: "evdev"
> [ 1216.559] (WW) Warning, couldn't open module evdev
> [ 1216.559] (II) UnloadModule: "evdev"
> [ 1216.559] (II) Unloading evdev
> [ 1216.559] (EE) Failed to load module "evdev" (module does not exist, 0)
> [ 1216.559] (EE) No input driver matching `evdev'
> [ 1216.560] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
> [ 1216.560] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
> [ 1216.560] (II) LoadModule: "evdev"
> [ 1216.560] (WW) Warning, couldn't open module evdev
> [ 1216.560] (II) UnloadModule: "evdev"
> [ 1216.560] (II) Unloading evdev
> [ 1216.560] (EE) Failed to load module "evdev" (module does not exist, 0)
> [ 1216.560] (EE) No input driver matching `evdev'
> [ 1216.560] (II) config/udev: Adding input device ImExPS/2 BYD TouchPad (/dev/input/event4)
> [ 1216.561] (**) ImExPS/2 BYD TouchPad: Applying InputClass "evdev pointer catchall"
> [ 1216.561] (II) LoadModule: "evdev"
> [ 1216.561] (WW) Warning, couldn't open module evdev
> [ 1216.561] (II) UnloadModule: "evdev"
> [ 1216.561] (II) Unloading evdev
> [ 1216.561] (EE) Failed to load module "evdev" (module does not exist, 0)
> [ 1216.561] (EE) No input driver matching `evdev'
> [ 1216.561] (II) config/udev: Adding input device ImExPS/2 BYD TouchPad (/dev/input/mouse0)
> [ 1216.562] (II) No input driver specified, ignoring this device.
> [ 1216.562] (II) This device may have been added with another device file.
> [ 1216.614] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
> [ 1216.614] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync.
> [ 1216.614] (II) VBoxVideo(0): Using hsync ranges from config file
> [ 1216.614] (II) VBoxVideo(0): Using vrefresh ranges from config file
> [ 1216.614] (II) VBoxVideo(0): Printing DDC gathered Modelines:
> [ 1216.614] (II) VBoxVideo(0): Modeline "800x600"x0.0 29.30 800 802 804 806 600 602 604 606 -hsync -vsync (36.4 kHz eP)
> [ 1218.847] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
> [ 1218.847] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync.
> [ 1218.847] (II) VBoxVideo(0): Using hsync ranges from config file
> [ 1218.847] (II) VBoxVideo(0): Using vrefresh ranges from config file
> [ 1218.847] (II) VBoxVideo(0): Printing DDC gathered Modelines:
> [ 1218.847] (II) VBoxVideo(0): Modeline "800x600"x0.0 29.30 800 802 804 806 600 602 604 606 -hsync -vsync (36.4 kHz eP)
> [ 1219.124] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
> [ 1219.124] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync.
> [ 1219.124] (II) VBoxVideo(0): Using hsync ranges from config file
> [ 1219.124] (II) VBoxVideo(0): Using vrefresh ranges from config file
> [ 1219.124] (II) VBoxVideo(0): Printing DDC gathered Modelines:
> [ 1219.124] (II) VBoxVideo(0): Modeline "800x600"x0.0 29.30 800 802 804 806 600 602 604 606 -hsync -vsync (36.4 kHz eP)
>
> ------- ------- ---=--- ------- -------
> tail_of_debug.log
> ------- ------- ---=--- ------- -------
> Dec 7 10:09:10 g0 kernel: [ 2.119048] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
> Dec 7 10:09:10 g0 kernel: [ 2.192015] scsi host0: ahci
> Dec 7 10:09:10 g0 kernel: [ 2.260155] scsi host1: ahci
> Dec 7 10:09:10 g0 kernel: [ 2.261016] scsi host2: ahci
> Dec 7 10:09:10 g0 kernel: [ 2.261016] scsi host3: ahci
> Dec 7 10:09:10 g0 kernel: [ 2.261016] scsi host4: ahci
> Dec 7 10:09:10 g0 kernel: [ 2.262016] ata1: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 11
> Dec 7 10:09:10 g0 kernel: [ 2.262016] ata2: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806180 irq 11
> Dec 7 10:09:10 g0 kernel: [ 2.262016] ata3: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806200 irq 11
> Dec 7 10:09:10 g0 kernel: [ 2.262016] ata4: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806280 irq 11
> Dec 7 10:09:10 g0 kernel: [ 2.262016] ata5: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806300 irq 11
> Dec 7 10:09:10 g0 kernel: [ 2.262016] ata_piix 0000:00:01.1: version 2.13
> Dec 7 10:09:10 g0 kernel: [ 2.376015] scsi host5: ata_piix
> Dec 7 10:09:10 g0 kernel: [ 2.376015] scsi host6: ata_piix
> Dec 7 10:09:10 g0 kernel: [ 2.377015] ata6: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
> Dec 7 10:09:10 g0 kernel: [ 2.377015] ata7: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
> Dec 7 10:09:10 g0 kernel: [ 2.377015] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
> Dec 7 10:09:10 g0 kernel: [ 2.377015] e1000: Copyright (c) 1999-2006 Intel Corporation.
> Dec 7 10:09:10 g0 kernel: [ 2.454016] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
> Dec 7 10:09:10 g0 kernel: [ 2.454016] PCI: setting IRQ 10 as level-triggered
> Dec 7 10:09:10 g0 kernel: [ 2.670053] ata7.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
> Dec 7 10:09:10 g0 kernel: [ 2.757016] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> Dec 7 10:09:10 g0 kernel: [ 2.863055] ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
> Dec 7 10:09:10 g0 kernel: [ 2.867205] ata1.00: 142606336 sectors, multi 128: LBA48 NCQ (depth 31/32)
> Dec 7 10:09:10 g0 kernel: [ 2.898196] ata1.00: configured for UDMA/133
> Dec 7 10:09:10 g0 kernel: [ 2.904103] ata7.00: configured for UDMA/33
> Dec 7 10:09:10 g0 kernel: [ 3.178048] scsi 0:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
> Dec 7 10:09:10 g0 kernel: [ 3.257016] sd 0:0:0:0: [sda] 142606336 512-byte logical blocks: (73.0 GB/68.0 GiB)
> Dec 7 10:09:10 g0 kernel: [ 3.267016] sd 0:0:0:0: Attached scsi generic sg0 type 0
> Dec 7 10:09:10 g0 kernel: [ 3.342050] sd 0:0:0:0: [sda] Write Protect is off
> Dec 7 10:09:10 g0 kernel: [ 3.345202] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> Dec 7 10:09:10 g0 kernel: [ 3.352015] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> Dec 7 10:09:10 g0 kernel: [ 3.602016] sda: sda1 sda2 sda3
> Dec 7 10:09:10 g0 kernel: [ 3.636104] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:3a:d4:fe
> Dec 7 10:09:10 g0 kernel: [ 3.647175] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
> Dec 7 10:09:10 g0 kernel: [ 3.683107] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> Dec 7 10:09:10 g0 kernel: [ 3.687166] ata2.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
> Dec 7 10:09:10 g0 kernel: [ 3.688115] ata2.00: 132120576 sectors, multi 128: LBA48 NCQ (depth 31/32)
> Dec 7 10:09:10 g0 kernel: [ 3.719200] ata2.00: configured for UDMA/133
> Dec 7 10:09:10 g0 kernel: [ 3.726093] scsi 1:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
> Dec 7 10:09:10 g0 kernel: [ 3.728164] sd 1:0:0:0: [sdb] 132120576 512-byte logical blocks: (67.6 GB/63.0 GiB)
> Dec 7 10:09:10 g0 kernel: [ 3.731157] sd 1:0:0:0: [sdb] Write Protect is off
> Dec 7 10:09:10 g0 kernel: [ 3.732107] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> Dec 7 10:09:10 g0 kernel: [ 3.737223] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
> Dec 7 10:09:10 g0 kernel: [ 3.771101] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> Dec 7 10:09:10 g0 kernel: [ 3.776142] sd 1:0:0:0: Attached scsi generic sg1 type 0
> Dec 7 10:09:10 g0 kernel: [ 3.807212] sdb: sdb1
> Dec 7 10:09:10 g0 kernel: [ 3.813093] sd 1:0:0:0: [sdb] Attached SCSI disk
> Dec 7 10:09:10 g0 kernel: [ 3.816147] sd 0:0:0:0: [sda] Attached SCSI disk
> Dec 7 10:09:10 g0 kernel: [ 3.846016] serio: i8042 KBD port at 0x60,0x64 irq 1
> Dec 7 10:09:10 g0 kernel: [ 3.850241] serio: i8042 AUX port at 0x60,0x64 irq 12
> Dec 7 10:09:10 g0 kernel: [ 3.855099] mousedev: PS/2 mouse device common for all mice
> Dec 7 10:09:10 g0 kernel: [ 3.906151] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
> Dec 7 10:09:10 g0 kernel: [ 3.941133] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
> Dec 7 10:09:10 g0 kernel: [ 3.945168] hidraw: raw HID events driver (C) Jiri Kosina
> Dec 7 10:09:10 g0 kernel: [ 3.948159] Initializing XFRM netlink socket
> Dec 7 10:09:10 g0 kernel: [ 3.950236] NET: Registered protocol family 17
> Dec 7 10:09:10 g0 kernel: [ 3.958172] Key type dns_resolver registered
> Dec 7 10:09:10 g0 kernel: [ 3.963174] microcode: sig=0x10676, pf=0x40, revision=0x60b
> Dec 7 10:09:10 g0 kernel: [ 3.995174] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
> Dec 7 10:09:10 g0 kernel: [ 4.047192] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
> Dec 7 10:09:10 g0 kernel: [ 4.099203] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> Dec 7 10:09:10 g0 kernel: [ 4.103198] ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
> Dec 7 10:09:10 g0 kernel: [ 4.104152] ata3.00: 83886080 sectors, multi 128: LBA48 NCQ (depth 31/32)
> Dec 7 10:09:10 g0 kernel: [ 4.109160] ata3.00: configured for UDMA/133
> Dec 7 10:09:10 g0 kernel: [ 4.114016] scsi 2:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
> Dec 7 10:09:10 g0 kernel: [ 4.123081] sd 2:0:0:0: [sdc] 83886080 512-byte logical blocks: (42.9 GB/40.0 GiB)
> Dec 7 10:09:10 g0 kernel: [ 4.128129] sd 2:0:0:0: Attached scsi generic sg2 type 0
> Dec 7 10:09:10 g0 kernel: [ 4.129092] sd 2:0:0:0: [sdc] Write Protect is off
> Dec 7 10:09:10 g0 kernel: [ 4.131053] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> Dec 7 10:09:10 g0 kernel: [ 4.134126] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> Dec 7 10:09:10 g0 kernel: [ 4.164225] sdc: sdc1
> Dec 7 10:09:10 g0 kernel: [ 4.171074] sd 2:0:0:0: [sdc] Attached SCSI disk
> Dec 7 10:09:10 g0 kernel: [ 4.347015] input: ImExPS/2 BYD TouchPad as /devices/platform/i8042/serio1/input/input5
> Dec 7 10:09:10 g0 kernel: [ 4.449721] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> Dec 7 10:09:10 g0 kernel: [ 4.454186] ata4.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
> Dec 7 10:09:10 g0 kernel: [ 4.456237] ata4.00: 209715200 sectors, multi 128: LBA48 NCQ (depth 31/32)
> Dec 7 10:09:10 g0 kernel: [ 4.462085] ata4.00: configured for UDMA/133
> Dec 7 10:09:10 g0 kernel: [ 4.465079] scsi 3:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
> Dec 7 10:09:10 g0 kernel: [ 4.467168] sd 3:0:0:0: [sdd] 209715200 512-byte logical blocks: (107 GB/100 GiB)
> Dec 7 10:09:10 g0 kernel: [ 4.476175] sd 3:0:0:0: Attached scsi generic sg3 type 0
> Dec 7 10:09:10 g0 kernel: [ 4.481101] sd 3:0:0:0: [sdd] Write Protect is off
> Dec 7 10:09:10 g0 kernel: [ 4.482011] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
> Dec 7 10:09:10 g0 kernel: [ 4.483220] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> Dec 7 10:09:10 g0 kernel: [ 4.498168] sdd: sdd1
> Dec 7 10:09:10 g0 kernel: [ 4.503090] sd 3:0:0:0: [sdd] Attached SCSI disk
> Dec 7 10:09:10 g0 kernel: [ 4.616016] random: crng init done
> Dec 7 10:09:10 g0 kernel: [ 4.827552] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> Dec 7 10:09:10 g0 kernel: [ 4.834037] ata5.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
> Dec 7 10:09:10 g0 kernel: [ 4.834050] ata5.00: 83886080 sectors, multi 128: LBA48 NCQ (depth 31/32)
> Dec 7 10:09:10 g0 kernel: [ 4.840078] ata5.00: configured for UDMA/133
> Dec 7 10:09:10 g0 kernel: [ 4.842102] scsi 4:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
> Dec 7 10:09:10 g0 kernel: [ 4.844191] sd 4:0:0:0: [sde] 83886080 512-byte logical blocks: (42.9 GB/40.0 GiB)
> Dec 7 10:09:10 g0 kernel: [ 4.853130] sd 4:0:0:0: Attached scsi generic sg4 type 0
> Dec 7 10:09:10 g0 kernel: [ 4.858165] sd 4:0:0:0: [sde] Write Protect is off
> Dec 7 10:09:10 g0 kernel: [ 4.859111] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
> Dec 7 10:09:10 g0 kernel: [ 4.861184] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> Dec 7 10:09:10 g0 kernel: [ 4.868016] scsi 6:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
> Dec 7 10:09:10 g0 kernel: [ 4.875204] sde: sde1
> Dec 7 10:09:10 g0 kernel: [ 4.884085] sr 6:0:0:0: [sr0] scsi3-mmc drive: 32x/32x xa/form2 tray
> Dec 7 10:09:10 g0 kernel: [ 4.886264] cdrom: Uniform CD-ROM driver Revision: 3.20
> Dec 7 10:09:10 g0 kernel: [ 4.891132] sd 4:0:0:0: [sde] Attached SCSI disk
> Dec 7 10:09:10 g0 kernel: [ 4.899171] sr 6:0:0:0: Attached scsi CD-ROM sr0
> Dec 7 10:09:10 g0 kernel: [ 4.923180] sr 6:0:0:0: Attached scsi generic sg5 type 5
> Dec 7 10:09:10 g0 kernel: [ 5.025624] EXT4-fs (sda3): couldn't mount as ext3 due to feature incompatibilities
> Dec 7 10:09:10 g0 kernel: [ 5.063968] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
> Dec 7 10:09:10 g0 kernel: [ 5.067208] EXT4-fs (sda3): write access will be enabled during recovery
> Dec 7 10:09:10 g0 kernel: [ 5.393053] EXT4-fs (sda3): recovery complete
> Dec 7 10:09:10 g0 kernel: [ 5.402044] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
> Dec 7 10:09:10 g0 kernel: [ 5.402044] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
> Dec 7 10:09:10 g0 kernel: [ 5.428649] devtmpfs: mounted
> Dec 7 10:09:10 g0 kernel: [ 5.439016] Freeing unused kernel memory: 356K (c1743000 - c179c000)
> Dec 7 10:09:10 g0 kernel: [ 5.451088] Write protecting the kernel text: 5400k
> Dec 7 10:09:10 g0 kernel: [ 5.459112] Write protecting the kernel read-only data: 1716k
> Dec 7 10:09:10 g0 kernel: [ 13.621061] vboxguest: loading out-of-tree module taints kernel.
> Dec 7 10:09:10 g0 kernel: [ 13.760016] e1000 0000:00:03.0 enp0s3: renamed from eth0
> Dec 7 10:09:10 g0 kernel: [ 13.910016] ACPI: No IRQ available for PCI Interrupt Link [LNKD]. Try pci=noacpi or acpi=off
> Dec 7 10:09:10 g0 kernel: [ 13.910016] vboxguest 0000:00:04.0: PCI INT A: no GSI
> Dec 7 10:09:10 g0 kernel: [ 13.959148] vgdrvHeartbeatInit: Setting up heartbeat to trigger every 2000 milliseconds
> Dec 7 10:09:10 g0 kernel: [ 15.167016] input: Unspecified device as /devices/pci0000:00/0000:00:04.0/input/input6
> Dec 7 10:09:10 g0 kernel: [ 15.169058] vboxguest: misc device minor 58, IRQ 9, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
> Dec 7 10:09:10 g0 kernel: [ 15.170016] vboxguest: Successfully loaded version 5.1.10 (interface 0x00010004)
> Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_mmap (err 0)
> Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_global_release (err 0)
> Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_pool_unpopulate (err 0)
> Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_manager_func (err 0)
> Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_global_init (err 0)
> Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_device_release (err 0)
> Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_kunmap (err 0)
> Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_del_sub_from_lru (err 0)
> Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_device_init (err 0)
> Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_init_mm (err 0)
> Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_dma_acc_size (err 0)
> Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_tt_init (err 0)
> Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_kmap (err 0)
> Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_add_to_lru (err 0)
> Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_unref (err 0)
> Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_mem_global_release (err 0)
> Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_mem_global_init (err 0)
> Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_default_lru_tail (err 0)
> Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_default_swap_lru_tail (err 0)
> Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_init (err 0)
> Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_validate (err 0)
> Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_bo_move_memcpy (err 0)
> Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_tt_fini (err 0)
> Dec 7 10:09:10 g0 kernel: [ 15.186212] vboxvideo: Unknown symbol ttm_pool_populate (err 0)
> Dec 7 10:09:10 g0 kernel: [ 17.155418] EXT4-fs (sda3): re-mounted. Opts: (null)
> Dec 7 10:09:10 g0 kernel: [ 17.815016] Adding 2916348k swap on /dev/sda2. Priority:-1 extents:1 across:2916348k
> Dec 7 10:09:10 g0 kernel: [ 18.071060] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
> Dec 7 10:09:10 g0 kernel: [ 18.108282] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
> Dec 7 10:09:10 g0 kernel: [ 18.166016] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
> Dec 7 10:09:10 g0 kernel: [ 18.214179] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null)
> Dec 7 10:09:11 g0 /usr/sbin/gpm[1066]: *** info [daemon/startup.c(136)]:
> Dec 7 10:09:11 g0 /usr/sbin/gpm[1066]: Started gpm successfully. Entered daemon mode.
> Dec 7 10:09:13 g0 kernel: [ 24.866181] e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
> Dec 7 10:09:15 g0 sendmail[1316]: alias database /etc/mail/aliases rebuilt by root
> Dec 7 10:09:15 g0 sendmail[1316]: /etc/mail/aliases: 23 aliases, longest 10 bytes, 244 bytes total
> Dec 7 10:09:15 g0 sm-mta[1320]: starting daemon (8.15.2): SMTP+queueing@00:30:00
> Dec 7 10:09:15 g0 sm-mta[1320]: started as: /usr/sbin/sendmail -bd -q30m -L sm-mta
> Dec 7 10:09:15 g0 sm-cm[1323]: starting daemon (8.15.2): queueing@00:30:00
> Dec 7 10:09:15 g0 sshd[1352]: Server listening on 0.0.0.0 port 22.
> Dec 7 10:09:15 g0 cron[1377]: (CRON) STARTUP (V5.0)
> Dec 7 10:09:16 g0 sm-mta[1320]: NOQUEUE: stopping daemon, reason=signal
> Dec 7 10:09:19 g0 kernel: [ 30.613016] e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
> Dec 7 10:09:20 g0 sendmail[1819]: alias database /etc/mail/aliases rebuilt by root
> Dec 7 10:09:20 g0 sendmail[1819]: /etc/mail/aliases: 23 aliases, longest 10 bytes, 244 bytes total
> Dec 7 10:09:20 g0 sm-mta[1829]: starting daemon (8.15.2): SMTP+queueing@00:30:00
> Dec 7 10:09:20 g0 sm-mta[1829]: started as: /usr/sbin/sendmail -bd -q30m -L sm-mta
> Dec 7 10:09:20 g0 sm-cm[1832]: starting daemon (8.15.2): queueing@00:30:00
> Dec 7 10:09:30 g0 login[1849]: pam_unix(login:session): session opened for user harry by LOGIN(uid=0)
> Dec 7 10:09:54 g0 sshd[1867]: Accepted keyboard-interactive/pam for harry from 192.168.1.20 port 62164 ssh2
> Dec 7 10:09:54 g0 sshd[1867]: pam_unix(sshd:session): session opened for user harry by (uid=0)
> Dec 7 10:10:01 g0 cron[1882]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons)
> Dec 7 10:10:49 g0 sshd[1899]: Accepted keyboard-interactive/pam for root from 127.0.0.1 port 40842 ssh2
> Dec 7 10:10:49 g0 sshd[1899]: pam_unix(sshd:session): session opened for user root by (uid=0)
>
> ------- ------- ---=--- ------- -------
> installed_pkgs_list.txt
> ------- ------- ---=--- ------- -------
> Wed Nov 16 18:12:43 2016 >>> app-eselect/eselect-vi-1.1.7-r1
> Wed Nov 16 18:12:56 2016 >>> app-eselect/eselect-ctags-1.18
> Wed Nov 16 18:13:50 2016 >>> dev-util/ctags-5.8
> Wed Nov 16 18:15:36 2016 >>> app-editors/vim-core-7.4.769
> Wed Nov 16 18:18:26 2016 >>> app-editors/vim-7.4.769
> Wed Nov 16 18:18:43 2016 >>> app-vim/gentoo-syntax-20160530
> Wed Nov 16 18:29:44 2016 >>> app-shells/push-1.6
> Wed Nov 16 18:30:15 2016 >>> app-portage/portage-utils-0.62
> Wed Nov 16 18:34:49 2016 >>> app-portage/eix-0.31.7-r1
> Wed Nov 16 18:53:22 2016 >>> sys-kernel/linux-headers-4.8
> Wed Nov 16 19:29:02 2016 >>> sys-libs/glibc-2.23-r3
> Wed Nov 16 19:31:13 2016 >>> dev-libs/expat-2.2.0-r1
> Wed Nov 16 19:31:32 2016 >>> sys-devel/gnuconfig-20161104
> Wed Nov 16 19:32:56 2016 >>> sys-libs/gdbm-1.12
> Wed Nov 16 19:33:16 2016 >>> sys-apps/gentoo-functions-0.11
> Wed Nov 16 19:33:51 2016 >>> sys-apps/debianutils-4.8
> Wed Nov 16 19:34:35 2016 >>> net-libs/libmnl-1.0.4
> Wed Nov 16 19:37:09 2016 >>> dev-libs/lzo-2.09
> Wed Nov 16 19:38:19 2016 >>> dev-libs/libbsd-0.8.3
> Wed Nov 16 19:38:39 2016 >>> sys-apps/baselayout-2.3
> Wed Nov 16 19:43:42 2016 >>> sys-apps/busybox-1.25.1
> Wed Nov 16 19:44:44 2016 >>> sys-libs/libseccomp-2.3.1
> Wed Nov 16 19:44:57 2016 >>> app-shells/quoter-2.0_p2
> Wed Nov 16 19:45:12 2016 >>> app-shells/push-1.11
> Wed Nov 16 19:46:20 2016 >>> dev-util/re2c-0.16
> Wed Nov 16 19:46:37 2016 >>> sys-apps/install-xattr-0.5-r1
> Wed Nov 16 19:46:54 2016 >>> dev-libs/gobject-introspection-common-1.50.0
> Wed Nov 16 19:48:08 2016 >>> media-libs/libpng-1.6.26
> Wed Nov 16 19:49:38 2016 >>> sys-apps/file-5.29
> Wed Nov 16 19:50:06 2016 >>> sys-libs/timezone-data-2016i
> Wed Nov 16 19:50:27 2016 >>> sys-devel/gcc-config-1.8-r1
> Wed Nov 16 19:50:51 2016 >>> net-misc/iputils-20151218
> Wed Nov 16 19:51:32 2016 >>> sys-apps/net-tools-1.60_p20161110235919
> Wed Nov 16 19:51:51 2016 >>> dev-libs/vala-common-0.34.2
> Wed Nov 16 19:57:45 2016 >>> dev-libs/gmp-6.1.1
> Wed Nov 16 19:58:22 2016 >>> app-arch/zip-3.0-r3
> Wed Nov 16 20:02:19 2016 >>> dev-libs/mpfr-3.1.5
> Wed Nov 16 20:04:21 2016 >>> dev-libs/mpc-1.0.3
> Wed Nov 16 20:11:32 2016 >>> sys-apps/coreutils-8.25
> Wed Nov 16 20:12:00 2016 >>> app-portage/portage-utils-0.63
> Wed Nov 16 20:12:38 2016 >>> dev-lang/python-exec-2.4.4
> Wed Nov 16 20:14:30 2016 >>> net-misc/rsync-3.1.2
> Wed Nov 16 20:16:31 2016 >>> net-firewall/iptables-1.6.0-r1
> Wed Nov 16 20:19:22 2016 >>> dev-libs/libpipeline-1.4.1
> Wed Nov 16 20:20:50 2016 >>> sys-apps/kmod-23
> Wed Nov 16 20:21:21 2016 >>> app-misc/pax-utils-1.1.7
> Wed Nov 16 20:23:26 2016 >>> sys-apps/sandbox-2.11-r3
> Wed Nov 16 20:23:57 2016 >>> sys-libs/libcap-2.25
> Wed Nov 16 20:24:26 2016 >>> sys-apps/man-pages-4.08
> Wed Nov 16 20:24:46 2016 >>> app-eselect/eselect-python-20160516
> Wed Nov 16 20:24:59 2016 >>> virtual/udev-217
> Wed Nov 16 20:25:17 2016 >>> sys-fs/udev-init-scripts-32
> Wed Nov 16 20:25:34 2016 >>> app-eselect/eselect-opengl-1.3.1-r4
> Wed Nov 16 20:26:00 2016 >>> net-misc/netifrc-0.5.1
> Wed Nov 16 20:26:16 2016 >>> virtual/libudev-232
> Wed Nov 16 20:26:29 2016 >>> app-eselect/eselect-mesa-0.0.10
> Wed Nov 16 20:28:24 2016 >>> app-text/docbook-xsl-stylesheets-1.79.1-r1
> Wed Nov 16 20:28:41 2016 >>> app-text/build-docbook-catalog-1.21
> Wed Nov 16 20:28:57 2016 >>> app-text/docbook-xml-dtd-4.2-r2
> Wed Nov 16 20:29:14 2016 >>> app-text/docbook-xml-dtd-4.4-r2
> Wed Nov 16 20:29:30 2016 >>> app-admin/perl-cleaner-2.22
> Wed Nov 16 20:29:45 2016 >>> app-eselect/eselect-vi-1.1.9
> Wed Nov 16 20:30:29 2016 >>> x11-proto/xproto-7.0.31
> Wed Nov 16 20:32:30 2016 >>> sys-apps/sed-4.2.2
> Wed Nov 16 20:32:54 2016 >>> x11-themes/hicolor-icon-theme-0.15
> Wed Nov 16 20:33:20 2016 >>> app-admin/eselect-1.4.7
> Wed Nov 16 20:34:20 2016 >>> x11-misc/shared-mime-info-1.7
> Wed Nov 16 20:35:00 2016 >>> x11-proto/xextproto-7.3.0
> Wed Nov 16 20:39:30 2016 >>> dev-libs/libxml2-2.9.4
> Wed Nov 16 20:40:56 2016 >>> media-libs/freetype-2.7-r2
> Wed Nov 16 20:57:28 2016 >>> sys-devel/binutils-2.27
> Wed Nov 16 20:58:40 2016 >>> sys-devel/make-4.2.1
> Wed Nov 16 21:07:57 2016 >>> sys-libs/db-6.0.35
> Wed Nov 16 21:17:59 2016 >>> dev-lang/perl-5.24.0-r2
> Wed Nov 16 21:18:20 2016 >>> sys-apps/hwids-20161103
> Wed Nov 16 21:18:33 2016 >>> virtual/perl-ExtUtils-MakeMaker-7.100.100_rc
> Wed Nov 16 21:18:45 2016 >>> virtual/perl-Test-Harness-3.360.0
> Wed Nov 16 21:18:58 2016 >>> virtual/perl-Data-Dumper-2.160.0
> Wed Nov 16 21:19:10 2016 >>> virtual/perl-File-Spec-3.630.0
> Wed Nov 16 21:19:23 2016 >>> virtual/perl-CPAN-Meta-YAML-0.18.0
> Wed Nov 16 21:19:36 2016 >>> virtual/perl-Parse-CPAN-Meta-1.441.700
> Wed Nov 16 21:19:58 2016 >>> dev-perl/Text-CharWidth-0.40.0-r1
> Wed Nov 16 21:20:21 2016 >>> perl-core/File-Temp-0.230.400-r1
> Wed Nov 16 21:20:49 2016 >>> dev-perl/XML-Parser-2.440.0
> Wed Nov 16 21:21:51 2016 >>> dev-lang/nasm-2.12.01
> Wed Nov 16 21:22:03 2016 >>> virtual/perl-version-0.991.600
> Wed Nov 16 21:22:14 2016 >>> virtual/perl-podlators-4.70.0
> Wed Nov 16 21:22:26 2016 >>> virtual/perl-Perl-OSType-1.9.0
> Wed Nov 16 21:22:39 2016 >>> virtual/perl-Module-Metadata-1.0.31
> Wed Nov 16 21:22:51 2016 >>> virtual/perl-Getopt-Long-2.480.0
> Wed Nov 16 21:23:04 2016 >>> virtual/perl-ExtUtils-ParseXS-3.310.0
> Wed Nov 16 21:23:16 2016 >>> virtual/perl-ExtUtils-CBuilder-0.280.225
> Wed Nov 16 21:25:33 2016 >>> media-libs/libjpeg-turbo-1.5.1
> Wed Nov 16 21:25:55 2016 >>> dev-perl/Text-WrapI18N-0.60.0-r1
> Wed Nov 16 21:26:39 2016 >>> dev-perl/Text-Unidecode-1.270.0
> Wed Nov 16 21:27:03 2016 >>> dev-perl/TermReadKey-2.330.0
> Wed Nov 16 21:27:25 2016 >>> dev-perl/Unicode-EastAsianWidth-1.330.0-r1
> Wed Nov 16 21:28:00 2016 >>> dev-perl/libintl-perl-1.240.0-r2
> Wed Nov 16 21:28:12 2016 >>> virtual/perl-CPAN-Meta-2.150.5
> Wed Nov 16 21:28:26 2016 >>> virtual/jpeg-0-r2
> Wed Nov 16 21:28:48 2016 >>> dev-perl/Module-Build-0.421.800
> Wed Nov 16 21:29:07 2016 >>> dev-perl/SGMLSpm-1.1-r1
> Wed Nov 16 21:29:38 2016 >>> sys-devel/autoconf-2.69-r2
> Wed Nov 16 21:31:22 2016 >>> app-editors/vim-core-8.0.0005-r1
> Wed Nov 16 21:32:01 2016 >>> x11-proto/inputproto-2.3.2
> Wed Nov 16 21:35:49 2016 >>> sys-libs/pam-1.3.0
> Wed Nov 16 21:36:23 2016 >>> x11-proto/renderproto-0.11.1-r1
> Wed Nov 16 21:37:00 2016 >>> x11-libs/xtrans-1.3.5
> Wed Nov 16 21:38:03 2016 >>> x11-libs/libICE-1.0.9
> Wed Nov 16 21:38:59 2016 >>> x11-libs/libSM-1.2.2-r1
> Thu Nov 17 00:07:23 2016 >>> sys-devel/gcc-5.4.0
> Thu Nov 17 00:08:19 2016 >>> x11-libs/libXau-1.0.8
> Thu Nov 17 00:09:04 2016 >>> dev-libs/libpthread-stubs-0.3-r1
> Thu Nov 17 00:09:59 2016 >>> x11-libs/libXdmcp-1.1.2-r1
> Thu Nov 17 00:10:39 2016 >>> x11-proto/kbproto-1.0.7
> Thu Nov 17 00:11:11 2016 >>> x11-proto/xf86vidmodeproto-2.3.1-r1
> Thu Nov 17 00:11:43 2016 >>> x11-proto/damageproto-1.2.1-r1
> Thu Nov 17 00:16:01 2016 >>> app-arch/tar-1.29-r1
> Thu Nov 17 00:21:08 2016 >>> sys-libs/binutils-libs-2.27
> Thu Nov 17 00:23:05 2016 >>> x11-libs/pixman-0.34.0
> Thu Nov 17 00:24:00 2016 >>> dev-libs/nspr-4.13.1
> Thu Nov 17 00:24:27 2016 >>> x11-proto/xf86bigfontproto-1.2.0-r1
> Thu Nov 17 00:26:10 2016 >>> sys-libs/e2fsprogs-libs-1.43.3
> Thu Nov 17 00:29:26 2016 >>> sys-fs/e2fsprogs-1.43.3-r1
> Thu Nov 17 00:32:21 2016 >>> app-arch/libarchive-3.2.2
> Thu Nov 17 00:34:56 2016 >>> media-libs/tiff-4.0.6-r1
> Thu Nov 17 00:36:13 2016 >>> x11-libs/libdrm-2.4.73
> Thu Nov 17 00:37:06 2016 >>> x11-libs/libxshmfence-1.2
> Thu Nov 17 00:39:08 2016 >>> dev-libs/nettle-3.3
> Thu Nov 17 00:39:40 2016 >>> x11-proto/fixesproto-5.0-r1
> Thu Nov 17 00:40:18 2016 >>> x11-proto/randrproto-1.5.0
> Thu Nov 17 00:40:50 2016 >>> x11-proto/compositeproto-0.4.2-r1
> Thu Nov 17 00:41:31 2016 >>> x11-proto/recordproto-1.14.2-r1
> Thu Nov 17 00:43:33 2016 >>> sys-devel/libtool-2.4.6-r2
> Thu Nov 17 00:44:15 2016 >>> sys-devel/automake-1.15-r2
> Thu Nov 17 00:44:40 2016 >>> x11-misc/util-macros-1.19.0
> Thu Nov 17 00:45:18 2016 >>> media-fonts/font-util-1.3.1
> Thu Nov 17 00:46:16 2016 >>> dev-libs/libatomic_ops-7.4.2
> Thu Nov 17 00:47:06 2016 >>> x11-libs/libfontenc-1.1.3
> Thu Nov 17 00:47:44 2016 >>> x11-proto/dri3proto-1.0
> Thu Nov 17 00:48:22 2016 >>> x11-proto/presentproto-1.0
> Thu Nov 17 00:49:01 2016 >>> x11-proto/glproto-1.4.17-r1
> Thu Nov 17 00:49:41 2016 >>> x11-proto/dri2proto-2.8-r1
> Thu Nov 17 00:50:12 2016 >>> x11-proto/xf86driproto-2.1.1-r1
> Thu Nov 17 00:54:16 2016 >>> net-misc/curl-7.51.0
> Thu Nov 17 00:55:33 2016 >>> dev-libs/libuv-1.10.0
> Thu Nov 17 00:56:12 2016 >>> x11-apps/mkfontscale-1.1.2
> Thu Nov 17 00:57:31 2016 >>> dev-libs/boehm-gc-7.4.2
> Thu Nov 17 00:58:11 2016 >>> x11-apps/mkfontdir-1.0.7
> Thu Nov 17 00:58:41 2016 >>> media-fonts/encodings-1.0.4
> Thu Nov 17 00:58:59 2016 >>> media-fonts/liberation-fonts-2.00.1-r2
> Thu Nov 17 00:59:08 2016 >>> virtual/ttf-fonts-1
> Thu Nov 17 01:01:32 2016 >>> media-libs/fontconfig-2.12.1
> Thu Nov 17 01:01:43 2016 >>> app-eselect/eselect-fontconfig-1.1-r1
> Thu Nov 17 01:02:09 2016 >>> dev-util/desktop-file-utils-0.23
> Thu Nov 17 01:03:29 2016 >>> dev-libs/libcroco-0.6.11
> Thu Nov 17 01:04:45 2016 >>> sys-devel/flex-2.6.1
> Thu Nov 17 01:06:00 2016 >>> sys-apps/iproute2-4.8.0
> Thu Nov 17 15:29:17 2016 >>> dev-libs/libxml2-2.9.4
> Thu Nov 17 15:29:52 2016 >>> dev-perl/Locale-gettext-1.70.0
> Thu Nov 17 15:31:04 2016 >>> sys-libs/readline-7.0-r1
> Thu Nov 17 15:33:19 2016 >>> dev-libs/libpcre-8.39
> Thu Nov 17 15:35:35 2016 >>> sys-apps/gawk-4.1.4
> Thu Nov 17 15:36:12 2016 >>> app-portage/gentoolkit-0.3.2-r1
> Thu Nov 17 15:37:34 2016 >>> sys-libs/gpm-1.20.7-r2
> Thu Nov 17 15:49:18 2016 >>> sys-libs/ncurses-6.0-r1
> Thu Nov 17 15:52:19 2016 >>> app-shells/bash-4.4_p5
> Thu Nov 17 15:53:07 2016 >>> sys-apps/less-487
> Thu Nov 17 15:54:57 2016 >>> sys-process/procps-3.3.12
> Thu Nov 17 16:14:24 2016 >>> sys-devel/gettext-0.19.8.1
> Thu Nov 17 16:15:06 2016 >>> app-portage/ufed-0.92
> Thu Nov 17 16:22:38 2016 >>> sys-apps/util-linux-2.29
> Thu Nov 17 16:23:34 2016 >>> sys-process/psmisc-22.21-r3
> Thu Nov 17 16:27:12 2016 >>> sys-apps/texinfo-6.3
> Thu Nov 17 16:27:48 2016 >>> app-text/po4a-0.45-r3
> Thu Nov 17 16:29:00 2016 >>> sys-apps/openrc-0.22.4
> Thu Nov 17 16:50:12 2016 >>> app-misc/screen-4.4.0
> Thu Nov 17 16:51:25 2016 >>> sys-libs/readline-7.0-r1
> Thu Nov 17 16:52:51 2016 >>> sys-libs/gpm-1.20.7-r2
> Thu Nov 17 16:53:49 2016 >>> dev-util/cscope-15.8a-r1
> Thu Nov 17 16:58:20 2016 >>> dev-libs/libxml2-2.9.4
> Thu Nov 17 16:59:06 2016 >>> x11-proto/xcb-proto-1.12-r2
> Thu Nov 17 17:02:07 2016 >>> x11-libs/libxcb-1.12-r2
> Thu Nov 17 17:08:10 2016 >>> x11-libs/libX11-1.6.4
> Thu Nov 17 17:09:45 2016 >>> x11-libs/libXt-1.1.5
> Thu Nov 17 17:10:47 2016 >>> x11-libs/libXext-1.3.3
> Thu Nov 17 17:11:58 2016 >>> x11-libs/libXmu-1.1.2
> Thu Nov 17 17:14:57 2016 >>> app-editors/vim-8.0.0005
> Thu Nov 17 17:15:38 2016 >>> x11-apps/xhost-1.0.7
> Thu Nov 17 17:16:23 2016 >>> x11-apps/xauth-1.0.9-r2
> Thu Nov 17 17:16:39 2016 >>> x11-misc/sux-1.0-r4
> Thu Nov 17 17:16:56 2016 >>> app-portage/cfg-update-1.8.9
> Thu Nov 17 20:07:13 2016 >>> sys-devel/autoconf-archive-2016.09.16
> Thu Nov 17 20:07:54 2016 >>> sys-apps/tcp-wrappers-7.6.22-r1
> Thu Nov 17 20:08:08 2016 >>> sys-process/cronbase-0.3.7-r6
> Thu Nov 17 20:14:55 2016 >>> dev-libs/libunistring-0.9.6
> Thu Nov 17 20:15:11 2016 >>> net-mail/mailbase-1.1
> Thu Nov 17 20:16:32 2016 >>> dev-libs/libfastjson-0.99.4
> Thu Nov 17 20:17:29 2016 >>> dev-libs/libestr-0.1.10
> Thu Nov 17 20:17:51 2016 >>> sys-devel/autoconf-2.13
> Thu Nov 17 20:25:18 2016 >>> dev-lang/python-3.4.5
> Thu Nov 17 20:31:33 2016 >>> dev-lang/python-2.7.12
> Thu Nov 17 20:32:32 2016 >>> x11-libs/libXrender-0.9.10
> Thu Nov 17 20:33:28 2016 >>> x11-libs/libXfixes-5.0.3
> Thu Nov 17 20:34:24 2016 >>> x11-libs/libXxf86vm-1.1.4
> Thu Nov 17 20:35:54 2016 >>> dev-libs/boehm-gc-7.4.2
> Thu Nov 17 20:36:45 2016 >>> dev-libs/liblogging-1.0.5
> Thu Nov 17 20:38:20 2016 >>> sys-boot/grub-0.97-r17
> Thu Nov 17 20:38:45 2016 >>> sys-process/vixie-cron-4.1-r14
> Thu Nov 17 20:40:30 2016 >>> mail-mta/sendmail-8.14.9-r1
> Thu Nov 17 20:41:55 2016 >>> x11-libs/libXi-1.7.8
> Thu Nov 17 20:42:52 2016 >>> x11-libs/libXdamage-1.1.4-r1
> Thu Nov 17 20:43:53 2016 >>> app-misc/ca-certificates-20160104.3.27.1-r2
> Thu Nov 17 20:45:34 2016 >>> app-portage/pfl-2.4-r4
> Thu Nov 17 20:47:12 2016 >>> dev-util/ninja-1.7.1
> Thu Nov 17 20:51:45 2016 >>> net-dns/libidn-1.33
> Thu Nov 17 20:53:02 2016 >>> dev-libs/libgpg-error-1.24
> Thu Nov 17 20:53:34 2016 >>> sys-apps/help2man-1.47.4
> Thu Nov 17 20:56:22 2016 >>> dev-libs/libtasn1-4.9-r1
> Thu Nov 17 20:57:08 2016 >>> sys-devel/automake-1.14.1-r1
> Thu Nov 17 20:58:17 2016 >>> sys-apps/portage-2.3.2
> Thu Nov 17 20:58:50 2016 >>> dev-util/gdbus-codegen-2.50.2
> Thu Nov 17 21:07:07 2016 >>> dev-libs/glib-2.50.2
> Thu Nov 17 21:08:05 2016 >>> dev-util/pkgconfig-0.29.1
> Thu Nov 17 21:12:01 2016 >>> dev-lang/spidermonkey-1.8.5-r6
> Thu Nov 17 21:12:57 2016 >>> x11-libs/libXcomposite-0.4.4-r1
> Thu Nov 17 21:13:55 2016 >>> x11-libs/libXrandr-1.5.1
> Thu Nov 17 21:14:54 2016 >>> x11-libs/libXcursor-1.1.14
> Thu Nov 17 21:15:50 2016 >>> x11-libs/libXtst-1.2.3
> Thu Nov 17 21:16:51 2016 >>> x11-libs/libXft-2.3.2
> Thu Nov 17 21:33:46 2016 >>> dev-util/cmake-3.7.0
> Thu Nov 17 23:06:47 2016 >>> sys-devel/llvm-3.9.0-r1
> Fri Nov 18 00:06:33 2016 >>> media-libs/mesa-13.0.1
> Fri Nov 18 00:11:19 2016 >>> x11-libs/cairo-1.14.6
> Fri Nov 18 00:13:52 2016 >>> dev-libs/gobject-introspection-1.50.0
> Fri Nov 18 00:17:41 2016 >>> x11-libs/gdk-pixbuf-2.36.0
> Fri Nov 18 00:19:17 2016 >>> dev-libs/atk-2.22.0
> Fri Nov 18 00:20:43 2016 >>> media-libs/libepoxy-1.3.1
> Fri Nov 18 00:21:44 2016 >>> dev-util/gtk-update-icon-cache-3.22.2
> Fri Nov 18 00:22:34 2016 >>> media-gfx/graphite2-1.3.8
> Fri Nov 18 00:24:34 2016 >>> media-libs/harfbuzz-1.3.3
> Fri Nov 18 00:27:47 2016 >>> x11-libs/pango-1.40.3
> Fri Nov 18 00:29:36 2016 >>> gnome-base/librsvg-2.40.16
> Fri Nov 18 00:38:31 2016 >>> x11-themes/adwaita-icon-theme-3.22.0
> Fri Nov 18 01:08:05 2016 >>> dev-scheme/guile-2.0.13
> Fri Nov 18 01:11:48 2016 >>> sys-devel/autogen-5.18.12
> Fri Nov 18 01:21:44 2016 >>> net-libs/gnutls-3.4.16
> Fri Nov 18 01:23:20 2016 >>> www-client/w3m-0.5.3-r8
> Fri Nov 18 01:23:32 2016 >>> virtual/w3m-0
> Fri Nov 18 01:24:10 2016 >>> dev-python/setuptools-28.8.0
> Fri Nov 18 01:24:42 2016 >>> dev-python/certifi-2016.9.26
> Fri Nov 18 01:29:05 2016 >>> app-admin/rsyslog-8.22.0
> Fri Nov 18 01:29:32 2016 >>> app-text/xmlto-0.0.28-r1
> Fri Nov 18 01:33:04 2016 >>> sys-apps/dbus-1.10.12
> Fri Nov 18 01:34:02 2016 >>> gnome-base/dconf-0.26.0-r1
> Fri Nov 18 01:35:37 2016 >>> app-accessibility/at-spi2-core-2.22.0
> Fri Nov 18 01:36:39 2016 >>> app-accessibility/at-spi2-atk-2.22.0
> Fri Nov 18 01:57:28 2016 >>> x11-libs/gtk+-3.22.3
> Fri Nov 18 02:00:08 2016 >>> sys-fs/eudev-3.2
> Fri Nov 18 02:02:19 2016 >>> sys-auth/polkit-0.113-r1
> Fri Nov 18 02:04:27 2016 >>> sys-auth/consolekit-1.1.0-r1
> Fri Nov 18 02:05:22 2016 >>> gnome-extra/polkit-gnome-0.105-r1
> Fri Nov 18 02:05:44 2016 >>> sys-auth/pambase-20150213
> Fri Nov 18 03:19:12 2016 >>> sys-devel/bc-1.06.95-r2
> Fri Nov 18 03:25:19 2016 >>> sys-kernel/gentoo-sources-4.8.8
> Fri Nov 18 08:26:48 2016 >>> sys-apps/pciutils-3.5.2
> Fri Nov 18 09:59:57 2016 >>> app-shells/ksh-93.20160110
> Fri Nov 18 21:25:36 2016 >>> sys-libs/mtdev-1.1.5
> Fri Nov 18 21:32:30 2016 >>> sys-power/iasl-20160729
> Fri Nov 18 21:33:00 2016 >>> x11-base/xorg-drivers-1.18-r1
> Fri Nov 18 21:33:32 2016 >>> virtual/linux-sources-1
> Fri Nov 18 21:36:00 2016 >>> dev-lang/yasm-1.3.0
> Fri Nov 18 21:46:51 2016 >>> dev-util/kbuild-0.1.9998_pre20131130-r1
> Fri Nov 18 21:48:30 2016 >>> x11-proto/fontsproto-2.1.3
> Fri Nov 18 21:50:19 2016 >>> x11-proto/scrnsaverproto-1.2.2-r1
> Fri Nov 18 21:51:43 2016 >>> x11-proto/resourceproto-1.2.0
> Fri Nov 18 21:53:11 2016 >>> x11-proto/xineramaproto-1.2.1-r1
> Fri Nov 18 21:55:50 2016 >>> dev-libs/libevdev-1.5.4
> Fri Nov 18 21:58:18 2016 >>> x11-libs/libxkbfile-1.0.9
> Fri Nov 18 22:00:15 2016 >>> x11-apps/xkbcomp-1.3.1
> Fri Nov 18 22:02:00 2016 >>> x11-apps/rgb-1.0.6
> Fri Nov 18 22:03:08 2016 >>> x11-proto/xf86rushproto-1.1.2-r1
> Fri Nov 18 22:04:51 2016 >>> x11-apps/iceauth-1.0.7
> Fri Nov 18 22:08:43 2016 >>> x11-libs/libXfont-1.5.2
> Fri Nov 18 22:10:24 2016 >>> x11-proto/xcmiscproto-1.2.2
> Fri Nov 18 22:12:04 2016 >>> x11-proto/bigreqsproto-1.1.2
> Fri Nov 18 22:13:35 2016 >>> x11-proto/xf86dgaproto-2.1-r2
> Fri Nov 18 22:15:21 2016 >>> x11-proto/videoproto-2.3.3
> Fri Nov 18 22:16:40 2016 >>> x11-misc/xbitmaps-1.1.1
> Fri Nov 18 22:17:49 2016 >>> x11-proto/trapproto-3.4.3
> Fri Nov 18 22:20:25 2016 >>> x11-libs/libpciaccess-0.13.4
> Fri Nov 18 22:22:55 2016 >>> x11-misc/xkeyboard-config-2.19
> Fri Nov 18 22:24:43 2016 >>> x11-apps/xrdb-1.1.0
> Fri Nov 18 22:26:33 2016 >>> x11-apps/xinit-1.3.4-r1
> Fri Nov 18 22:52:52 2016 >>> x11-base/xorg-server-1.18.4
> Fri Nov 18 22:55:09 2016 >>> x11-drivers/xf86-input-mouse-1.9.1
> Fri Nov 18 22:57:47 2016 >>> x11-drivers/xf86-input-evdev-2.10.4
> Fri Nov 18 23:23:10 2016 >>> x11-drivers/xf86-video-virtualbox-5.1.8
> Fri Nov 18 23:25:24 2016 >>> x11-drivers/xf86-input-keyboard-1.8.1
> Sat Nov 19 01:09:30 2016 >>> virtual/mta-1
> Sat Nov 19 01:12:07 2016 >>> app-editors/nano-2.7.1
> Sat Nov 19 01:22:47 2016 >>> app-admin/sudo-1.8.18_p1
> Sat Nov 19 02:33:57 2016 >>> sys-apps/sandbox-2.10-r2
> Sat Nov 19 02:39:22 2016 >>> mail-client/mutt-1.7.1-r4
> Sat Nov 19 03:20:00 2016 >>> x11-base/xorg-server-1.18.4
> Sat Nov 19 07:27:30 2016 >>> dev-python/pyxattr-0.5.5
> Sat Nov 19 07:37:41 2016 >>> dev-libs/libxml2-2.9.4
> Sat Nov 19 07:59:51 2016 >>> sys-libs/readline-7.0_p1
> Sat Nov 19 08:08:12 2016 >>> net-misc/wget-1.18
> Sat Nov 19 08:14:31 2016 >>> sys-apps/grep-2.26
> Sat Nov 19 08:21:29 2016 >>> sys-apps/diffutils-3.5
> Sat Nov 19 08:27:07 2016 >>> app-portage/eix-0.32.1-r1
> Sat Nov 19 08:28:48 2016 >>> sys-devel/automake-1.13.4-r1
> Sat Nov 19 08:38:38 2016 >>> app-admin/rsyslog-8.23.0
> Sat Nov 19 08:48:52 2016 >>> app-text/opensp-1.5.2-r4
> Sat Nov 19 08:50:24 2016 >>> dev-python/pygments-2.1.3
> Sat Nov 19 08:54:45 2016 >>> dev-python/docutils-0.12-r1
> Sat Nov 19 08:57:44 2016 >>> dev-util/ctags-20161028
> Sat Nov 19 09:00:33 2016 >>> x11-libs/libXpm-3.5.11
> Sat Nov 19 09:03:46 2016 >>> x11-libs/libXaw-1.0.13
> Sat Nov 19 09:14:03 2016 >>> sys-apps/groff-1.22.3
> Sat Nov 19 09:16:32 2016 >>> x11-drivers/xf86-input-keyboard-1.9.0
> Sat Nov 19 09:19:04 2016 >>> x11-drivers/xf86-input-mouse-1.9.2
> Sat Nov 19 09:26:07 2016 >>> sys-apps/shadow-4.2.1-r2
> Sat Nov 19 09:35:18 2016 >>> net-misc/openssh-7.3_p1-r7
> Sat Nov 19 10:12:26 2016 >>> sys-apps/portage-2.3.2
> Sat Nov 19 10:22:01 2016 >>> www-client/lynx-2.8.9_pre9
> Sat Nov 19 10:42:30 2016 >>> media-libs/libogg-1.3.2
> Sat Nov 19 10:44:27 2016 >>> dev-libs/libyaml-0.1.7
> Sat Nov 19 10:46:51 2016 >>> media-libs/giflib-5.1.4
> Sat Nov 19 10:47:37 2016 >>> app-text/docbook-dsssl-stylesheets-1.79
> Sat Nov 19 10:48:21 2016 >>> app-dicts/myspell-en-20160901
> Sat Nov 19 10:48:59 2016 >>> app-text/docbook-sgml-dtd-3.0-r3
> Sat Nov 19 10:49:45 2016 >>> sys-apps/paxctl-0.9
> Sat Nov 19 10:53:26 2016 >>> dev-util/ragel-6.9
> Sat Nov 19 10:57:32 2016 >>> dev-lang/orc-0.4.26-r1
> Sat Nov 19 10:57:59 2016 >>> app-eselect/eselect-ruby-20151229
> Sat Nov 19 10:59:00 2016 >>> app-eselect/eselect-lib-bin-symlink-0.1.1
> Sat Nov 19 10:59:27 2016 >>> app-eselect/eselect-notify-send-0.1
> Sat Nov 19 11:03:12 2016 >>> dev-db/sqlite-3.15.1
> Sat Nov 19 11:04:17 2016 >>> dev-util/itstool-2.0.2
> Sat Nov 19 11:09:28 2016 >>> app-text/hunspell-1.4.2
> Sat Nov 19 11:10:47 2016 >>> app-text/iso-codes-3.70
> Sat Nov 19 11:13:09 2016 >>> sys-apps/mlocate-0.26-r1
> Sat Nov 19 11:13:31 2016 >>> virtual/awk-1
> Sat Nov 19 11:15:00 2016 >>> dev-libs/hyphen-2.8.8
> Sat Nov 19 11:15:43 2016 >>> virtual/opengl-7.0-r1
> Sat Nov 19 11:20:07 2016 >>> media-libs/glu-9.0.0-r1
> Sat Nov 19 11:20:49 2016 >>> virtual/glu-9.0-r1
> Sat Nov 19 11:35:19 2016 >>> dev-libs/icu-58.1-r1
> Sat Nov 19 11:38:43 2016 >>> app-text/enchant-1.6.0
> Sat Nov 19 11:41:15 2016 >>> x11-libs/libXv-1.0.11
> Sat Nov 19 11:44:38 2016 >>> media-libs/libvorbis-1.3.5
> Sat Nov 19 11:51:39 2016 >>> app-crypt/p11-kit-0.23.2
> Sat Nov 19 11:54:01 2016 >>> media-libs/freeglut-3.0.0
> Sat Nov 19 11:55:34 2016 >>> gnome-extra/yelp-xsl-3.20.1
> Sat Nov 19 11:57:16 2016 >>> net-libs/libproxy-0.4.13-r1
> Sat Nov 19 12:07:01 2016 >>> dev-lang/vala-0.34.2
> Sat Nov 19 12:11:57 2016 >>> media-libs/harfbuzz-1.3.3
> Sat Nov 19 12:25:13 2016 >>> media-libs/gstreamer-1.8.3
> Sat Nov 19 12:31:30 2016 >>> media-libs/libwebp-0.5.1
> Sat Nov 19 12:33:41 2016 >>> gnome-base/gsettings-desktop-schemas-3.22.0
> Sat Nov 19 12:34:55 2016 >>> app-text/yelp-tools-3.18.0
> Sat Nov 19 12:38:17 2016 >>> net-libs/glib-networking-2.50.0
> Sat Nov 19 12:58:22 2016 >>> x11-themes/gnome-themes-standard-3.22.2
> Sat Nov 19 13:05:21 2016 >>> net-libs/libsoup-2.56.0
> Sat Nov 19 13:20:44 2016 >>> media-libs/gst-plugins-base-1.8.3-r1
> Sat Nov 19 13:37:37 2016 >>> dev-lang/ruby-2.1.10
> Sat Nov 19 13:54:08 2016 >>> dev-lang/ruby-2.0.0_p648
> Sat Nov 19 13:56:00 2016 >>> dev-ruby/rubygems-2.6.8
> Sat Nov 19 13:56:57 2016 >>> virtual/rubygems-11
> Sat Nov 19 13:58:16 2016 >>> dev-ruby/rake-11.3.0
> Sat Nov 19 13:59:43 2016 >>> dev-ruby/json-2.0.2
> Sat Nov 19 14:01:06 2016 >>> dev-ruby/racc-1.4.14
> Sat Nov 19 14:02:31 2016 >>> dev-ruby/json-1.8.3
> Sat Nov 19 14:04:26 2016 >>> dev-ruby/rdoc-4.3.0
> Sat Nov 19 14:06:29 2016 >>> x11-libs/libnotify-0.7.7
> Sat Nov 19 14:08:53 2016 >>> x11-misc/notification-daemon-3.20.0
> Sat Nov 19 14:09:19 2016 >>> virtual/notification-daemon-0
> Sat Nov 19 14:10:03 2016 >>> app-text/docbook-xml-dtd-4.3-r1
> Sat Nov 19 14:27:17 2016 >>> app-crypt/gcr-3.20.0
> Sat Nov 19 14:48:35 2016 >>> media-libs/gst-plugins-bad-1.8.3
> Sat Nov 19 14:52:43 2016 >>> dev-libs/json-glib-1.2.2
> Sat Nov 19 14:54:57 2016 >>> dev-libs/libgudev-230-r1
> Sat Nov 19 14:55:41 2016 >>> virtual/libgudev-230
> Sat Nov 19 14:59:02 2016 >>> dev-util/gtk-doc-1.25-r1
> Sat Nov 19 15:02:12 2016 >>> net-libs/libmbim-1.14.0
> Sat Nov 19 15:06:29 2016 >>> net-libs/libqmi-1.16.2
> Sat Nov 19 15:30:56 2016 >>> x11-libs/gtk+-2.24.31-r1
> Sat Nov 19 15:32:54 2016 >>> x11-themes/gtk-engines-adwaita-3.20.2
> Sat Nov 19 15:43:41 2016 >>> net-misc/modemmanager-1.6.2
> Sat Nov 19 15:49:11 2016 >>> app-misc/geoclue-2.4.4
> Sat Nov 19 21:51:31 2016 >>> dev-qt/qtchooser-0_p20151008
> Sat Nov 19 21:53:52 2016 >>> dev-libs/npth-1.2
> Sat Nov 19 21:57:19 2016 >>> media-libs/lcms-2.8
> Sat Nov 19 22:00:43 2016 >>> media-libs/libmng-2.0.3
> Sat Nov 19 22:03:19 2016 >>> dev-libs/libassuan-2.4.3
> Sat Nov 19 22:05:54 2016 >>> dev-libs/libksba-1.3.5-r1
> Sat Nov 19 22:06:21 2016 >>> virtual/perl-Digest-SHA-5.950.0-r1
> Sat Nov 19 22:06:49 2016 >>> virtual/perl-Digest-MD5-2.540.0-r1
> Sat Nov 19 22:07:16 2016 >>> virtual/perl-MIME-Base64-3.150.0-r1
> Sat Nov 19 22:07:43 2016 >>> virtual/perl-libnet-3.80.0
> Sat Nov 19 22:09:04 2016 >>> dev-perl/Net-SSLeay-1.720.0-r1
> Sat Nov 19 22:10:00 2016 >>> dev-perl/Digest-HMAC-1.30.0-r1
> Sat Nov 19 22:10:45 2016 >>> perl-core/Scalar-List-Utils-1.460.0
> Sat Nov 19 22:11:13 2016 >>> virtual/perl-Scalar-List-Utils-1.460.0
> Sat Nov 19 22:12:24 2016 >>> dev-perl/Authen-SASL-2.160.0-r1
> Sat Nov 19 22:13:18 2016 >>> dev-perl/Error-0.170.240
> Sat Nov 19 22:14:12 2016 >>> dev-perl/IO-Socket-SSL-2.24.0
> Sat Nov 19 22:15:03 2016 >>> dev-perl/Net-SMTP-SSL-1.30.0
> Sat Nov 19 22:15:29 2016 >>> app-eselect/eselect-qtgraphicssystem-1.1.1
> Sat Nov 19 22:15:54 2016 >>> app-eselect/eselect-pinentry-0.7
> Sat Nov 19 22:17:53 2016 >>> dev-vcs/mercurial-4.0
> Sat Nov 19 22:19:11 2016 >>> dev-python/six-1.10.0
> Sat Nov 19 22:20:31 2016 >>> dev-python/pyasn1-0.1.9
> Sat Nov 19 22:21:48 2016 >>> dev-python/idna-2.1
> Sat Nov 19 22:22:54 2016 >>> dev-python/enum34-1.1.6
> Sat Nov 19 22:24:05 2016 >>> dev-python/ply-3.9
> Sat Nov 19 22:37:15 2016 >>> dev-python/numpy-1.11.2-r1
> Sat Nov 19 22:38:17 2016 >>> dev-python/ipaddress-1.0.17
> Sat Nov 19 22:39:31 2016 >>> dev-python/pycparser-2.17
> Sat Nov 19 22:40:19 2016 >>> virtual/python-ipaddress-1.0
> Sat Nov 19 22:41:46 2016 >>> dev-python/cffi-1.8.3
> Sat Nov 19 22:44:31 2016 >>> dev-python/cryptography-1.5.3-r1
> Sat Nov 19 22:45:45 2016 >>> dev-python/paramiko-2.0.2
> Sat Nov 19 22:48:19 2016 >>> dev-vcs/bzr-2.6.0
> Sat Nov 19 22:51:26 2016 >>> x11-libs/xpyb-1.3.1-r3
> Sat Nov 19 22:55:51 2016 >>> dev-python/pygobject-2.28.6-r55
> Sat Nov 19 22:57:31 2016 >>> dev-python/pycairo-1.10.0-r5
> Sat Nov 19 23:01:33 2016 >>> x11-libs/gtksourceview-2.10.5-r3
> Sat Nov 19 23:06:16 2016 >>> gnome-base/libglade-2.6.4-r2
> Sat Nov 19 23:12:41 2016 >>> dev-python/pygtk-2.24.0-r4
> Sat Nov 19 23:15:23 2016 >>> dev-python/pygtksourceview-2.10.1-r1
> Sat Nov 19 23:51:06 2016 >>> dev-qt/qtcore-4.8.7-r2
> Sat Nov 19 23:53:38 2016 >>> dev-qt/qttranslations-4.8.7
> Sun Nov 20 00:14:07 2016 >>> dev-qt/qtscript-4.8.7
> Sun Nov 20 00:59:30 2016 >>> dev-qt/qtgui-4.8.7
> Sun Nov 20 01:11:22 2016 >>> dev-qt/qtsql-4.8.7-r1
> Sun Nov 20 01:33:02 2016 >>> dev-qt/qt3support-4.8.7
> Sun Nov 20 01:35:53 2016 >>> app-crypt/pinentry-0.9.7-r1
> Sun Nov 20 01:38:22 2016 >>> dev-libs/libusb-1.0.21
> Sun Nov 20 01:39:10 2016 >>> virtual/libusb-1-r2
> Sun Nov 20 01:41:03 2016 >>> dev-libs/libusb-compat-0.1.5-r3
> Sun Nov 20 01:41:49 2016 >>> virtual/libusb-0-r2
> Sun Nov 20 07:31:06 2016 >>> dev-libs/pth-2.0.7-r3
> Sun Nov 20 07:38:14 2016 >>> app-crypt/gnupg-2.0.28
> Sun Nov 20 08:59:20 2016 >>> dev-libs/libgpg-error-1.25
> Sun Nov 20 09:06:23 2016 >>> app-crypt/gnupg-2.1.16
> Sun Nov 20 09:15:05 2016 >>> dev-vcs/git-2.11.0_rc2
> Sun Nov 20 09:22:31 2016 >>> sys-kernel/gentoo-sources-4.8.9
> Sun Nov 20 17:52:32 2016 >>> net-libs/webkit-gtk-2.4.11-r200
> Sun Nov 20 17:53:48 2016 >>> www-client/vimb-2.11
> Sun Nov 20 18:20:00 2016 >>> virtual/perl-Term-ANSIColor-4.40.0
> Sun Nov 20 18:20:27 2016 >>> virtual/perl-IO-1.360.0
> Sun Nov 20 18:20:58 2016 >>> virtual/perl-Memoize-1.30.0-r3
> Sun Nov 20 18:21:25 2016 >>> virtual/perl-File-Path-2.120.100_rc
> Sun Nov 20 18:22:08 2016 >>> dev-perl/YAML-1.190.0
> Sun Nov 20 18:22:56 2016 >>> dev-perl/Log-Agent-1.1.0
> Sun Nov 20 18:27:02 2016 >>> dev-perl/Class-MethodMaker-2.240.0
> Sun Nov 20 18:27:59 2016 >>> dev-perl/Shell-EnvImporter-1.70.0-r2
> Sun Nov 20 18:28:43 2016 >>> app-portage/g-cpan-0.16.9
> Sun Nov 20 18:32:57 2016 >>> dev-perl/File-Which-1.90.0-r1
> Sun Nov 20 19:51:18 2016 >>> sys-apps/lsb-release-1.4-r3
> Sun Nov 20 19:51:47 2016 >>> app-eselect/eselect-cdparanoia-0.1
> Sun Nov 20 19:53:09 2016 >>> lxde-base/lxmenu-data-0.1.5
> Sun Nov 20 19:55:23 2016 >>> x11-libs/xcb-util-renderutil-0.3.9-r1
> Sun Nov 20 19:57:53 2016 >>> x11-libs/libfm-extra-1.2.4
> Sun Nov 20 20:00:08 2016 >>> x11-libs/libXinerama-1.1.3
> Sun Nov 20 20:02:24 2016 >>> x11-libs/xcb-util-wm-0.4.1-r1
> Sun Nov 20 20:04:35 2016 >>> x11-libs/xcb-util-keysyms-0.4.0
> Sun Nov 20 20:06:15 2016 >>> x11-apps/xrandr-1.5.0
> Sun Nov 20 20:08:41 2016 >>> media-libs/libexif-0.6.21-r1
> Sun Nov 20 20:14:15 2016 >>> dev-libs/libcdio-0.94-r1
> Sun Nov 20 20:16:22 2016 >>> x11-libs/libXres-1.0.7
> Sun Nov 20 20:17:47 2016 >>> lxde-base/menu-cache-1.0.2
> Sun Nov 20 20:19:34 2016 >>> x11-libs/gnome-pty-helper-0.40.2
> Sun Nov 20 20:25:45 2016 >>> sys-apps/keyutils-1.5.9-r2
> Sun Nov 20 20:29:27 2016 >>> dev-libs/libevent-2.1.5-r4
> Sun Nov 20 20:31:53 2016 >>> net-libs/libnfsidmap-0.25-r1
> Sun Nov 20 20:34:25 2016 >>> net-libs/libtirpc-1.0.1
> Sun Nov 20 20:35:43 2016 >>> net-nds/rpcbind-0.2.3-r2
> Sun Nov 20 20:41:14 2016 >>> net-fs/nfs-utils-1.3.4
> Wed Nov 30 23:22:46 2016 >>> net-dns/bind-tools-9.11.0_p1
> Wed Nov 30 23:44:08 2016 >>> dev-libs/npth-1.3
> Wed Nov 30 23:45:15 2016 >>> sys-devel/bin86-0.16.21
> Wed Nov 30 23:46:36 2016 >>> sys-libs/timezone-data-2016j
> Wed Nov 30 23:47:38 2016 >>> dev-libs/vala-common-0.34.3
> Thu Dec 1 00:01:22 2016 >>> sys-apps/coreutils-8.26
> Thu Dec 1 00:02:17 2016 >>> app-portage/portage-utils-0.64
> Thu Dec 1 00:21:36 2016 >>> dev-lang/perl-5.24.1_rc4
> Thu Dec 1 00:22:06 2016 >>> virtual/perl-ExtUtils-MakeMaker-7.100.200_rc
> Thu Dec 1 00:22:36 2016 >>> virtual/perl-Test-Harness-3.360.100_rc
> Thu Dec 1 00:23:06 2016 >>> virtual/perl-File-Spec-3.630.100_rc
> Thu Dec 1 00:23:36 2016 >>> virtual/perl-Data-Dumper-2.160.0-r1
> Thu Dec 1 00:24:06 2016 >>> virtual/perl-CPAN-Meta-YAML-0.18.0-r1
> Thu Dec 1 00:24:36 2016 >>> virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc
> Thu Dec 1 00:25:05 2016 >>> virtual/perl-Digest-SHA-5.950.100_rc
> Thu Dec 1 00:25:35 2016 >>> virtual/perl-Digest-MD5-2.540.0-r2
> Thu Dec 1 00:26:05 2016 >>> virtual/perl-version-0.991.600-r1
> Thu Dec 1 00:26:35 2016 >>> virtual/perl-podlators-4.70.0-r1
> Thu Dec 1 00:27:05 2016 >>> virtual/perl-Text-ParseWords-3.300.0-r2
> Thu Dec 1 00:27:35 2016 >>> virtual/perl-Perl-OSType-1.9.0-r1
> Thu Dec 1 00:28:05 2016 >>> virtual/perl-Module-Metadata-1.0.31-r1
> Thu Dec 1 00:28:35 2016 >>> virtual/perl-Getopt-Long-2.480.0-r1
> Thu Dec 1 00:29:06 2016 >>> virtual/perl-ExtUtils-ParseXS-3.310.0-r1
> Thu Dec 1 00:29:36 2016 >>> virtual/perl-ExtUtils-Manifest-1.700.0-r3
> Thu Dec 1 00:30:06 2016 >>> virtual/perl-ExtUtils-Install-2.40.0-r2
> Thu Dec 1 00:30:36 2016 >>> virtual/perl-ExtUtils-CBuilder-0.280.225-r1
> Thu Dec 1 00:31:06 2016 >>> virtual/perl-JSON-PP-2.273.0.100_rc
> Thu Dec 1 00:31:36 2016 >>> virtual/perl-MIME-Base64-3.150.0-r2
> Thu Dec 1 00:32:06 2016 >>> virtual/perl-libnet-3.80.100_rc
> Thu Dec 1 00:32:36 2016 >>> virtual/perl-Term-ANSIColor-4.40.0-r1
> Thu Dec 1 00:33:06 2016 >>> virtual/perl-IO-1.360.100_rc
> Thu Dec 1 00:33:36 2016 >>> virtual/perl-Memoize-1.30.100_rc
> Thu Dec 1 00:34:07 2016 >>> virtual/perl-File-Path-2.120.100_rc-r1
> Thu Dec 1 00:34:37 2016 >>> virtual/perl-File-Temp-0.230.400-r5
> Thu Dec 1 00:35:07 2016 >>> virtual/perl-CPAN-Meta-2.150.5-r1
> Thu Dec 1 00:35:37 2016 >>> virtual/perl-Scalar-List-Utils-1.460.0-r1
> Thu Dec 1 00:36:27 2016 >>> dev-perl/IO-Socket-SSL-2.39.0
> Thu Dec 1 00:42:20 2016 >>> media-libs/tiff-4.0.7
> Thu Dec 1 00:46:29 2016 >>> app-editors/vim-core-8.0.0106
> Thu Dec 1 00:51:55 2016 >>> mail-client/mutt-1.7.1-r5
> Thu Dec 1 00:58:34 2016 >>> app-shells/bash-4.4_p5-r1
> Thu Dec 1 01:04:56 2016 >>> sys-kernel/gentoo-sources-4.8.7
> Thu Dec 1 01:06:28 2016 >>> dev-python/ipaddress-1.0.17-r1
> Thu Dec 1 01:07:26 2016 >>> virtual/python-ipaddress-1.0-r1
> Thu Dec 1 01:09:06 2016 >>> dev-python/cffi-1.9.1
> Thu Dec 1 01:12:19 2016 >>> dev-python/cryptography-1.6
> Thu Dec 1 03:25:01 2016 >>> media-libs/mesa-13.0.2
> Thu Dec 1 03:43:01 2016 >>> dev-util/cmake-3.7.0-r1
> Thu Dec 1 03:44:43 2016 >>> x11-apps/xrefresh-1.0.5
> Thu Dec 1 03:46:57 2016 >>> media-gfx/graphite2-1.3.9
> Thu Dec 1 03:52:40 2016 >>> app-editors/vim-8.0.0106
> Thu Dec 1 04:01:07 2016 >>> sys-apps/dbus-1.10.14
> Thu Dec 1 09:09:21 2016 >>> x11-libs/gtk+-3.22.4
> Thu Dec 1 09:12:16 2016 >>> app-crypt/pinentry-1.0.0
> Thu Dec 1 09:21:42 2016 >>> dev-vcs/git-2.11.0
> Thu Dec 1 09:46:47 2016 >>> x11-drivers/xf86-video-virtualbox-5.1.10
> Thu Dec 1 10:14:00 2016 >>> app-emulation/virtualbox-guest-additions-5.1.10
> Thu Dec 1 10:23:01 2016 >>> net-misc/openssh-7.3_p1-r8
> Sun Dec 4 08:54:34 2016 >>> net-libs/liblockfile-1.09
> Sun Dec 4 08:55:33 2016 >>> app-emacs/emacs-common-gentoo-1.5
> Sun Dec 4 08:56:03 2016 >>> app-eselect/eselect-emacs-1.18
> Sun Dec 4 09:08:04 2016 >>> app-editors/emacs-25.1
> Sun Dec 4 09:08:32 2016 >>> virtual/emacs-25
> Sun Dec 4 09:12:28 2016 >>> dev-db/sqlite-3.15.2
> Sun Dec 4 09:15:10 2016 >>> app-misc/ca-certificates-20161102.3.27.2-r2
> Sun Dec 4 09:17:49 2016 >>> dev-vcs/mercurial-4.0.1
> Sun Dec 4 09:36:42 2016 >>> dev-util/cmake-3.7.1
> Sun Dec 4 13:39:46 2016 >>> mail-client/mailx-support-20060102-r2
> Sun Dec 4 13:40:45 2016 >>> mail-client/mailx-8.1.2.20050715-r7
> Mon Dec 5 22:23:55 2016 >>> mail-filter/procmail-3.22-r11
> Tue Dec 6 09:23:18 2016 >>> virtual/cron-0-r1
> Tue Dec 6 09:25:08 2016 >>> app-admin/logrotate-3.11.0
> Tue Dec 6 12:27:48 2016 >>> dev-perl/Text-Unidecode-1.300.0
> Tue Dec 6 12:31:09 2016 >>> x11-libs/libdrm-2.4.74
> Tue Dec 6 12:35:25 2016 >>> dev-libs/libcdio-paranoia-0.93_p1-r1
> Tue Dec 6 13:21:12 2016 >>> dev-scheme/guile-2.0.13-r1
> Tue Dec 6 13:30:34 2016 >>> dev-lang/vala-0.34.3
> Tue Dec 6 13:35:15 2016 >>> media-libs/harfbuzz-1.3.4
> Tue Dec 6 13:37:57 2016 >>> dev-libs/libgee-0.6.8
> Tue Dec 6 13:41:25 2016 >>> www-client/w3m-0.5.3-r9
> Tue Dec 6 13:41:51 2016 >>> virtual/freedesktop-icon-theme-0-r1
> Tue Dec 6 13:44:37 2016 >>> lxde-base/lxde-icon-theme-0.5.1
> Tue Dec 6 13:46:20 2016 >>> lxde-base/lxinput-0.3.5
> Tue Dec 6 13:48:31 2016 >>> media-gfx/gpicview-0.2.5
> Tue Dec 6 13:50:20 2016 >>> lxde-base/lxtask-0.1.7
> Tue Dec 6 13:51:59 2016 >>> lxde-base/lxrandr-0.3.1
> Tue Dec 6 13:53:45 2016 >>> dev-libs/keybinder-0.3.1-r200
> Tue Dec 6 13:59:25 2016 >>> x11-libs/vte-0.28.2-r207
> Tue Dec 6 14:00:44 2016 >>> lxde-base/lxde-common-0.99.1
> Tue Dec 6 14:02:31 2016 >>> lxde-base/lxterminal-0.2.0-r1
> Tue Dec 6 14:04:50 2016 >>> x11-libs/xcb-util-0.4.0
> Tue Dec 6 14:07:19 2016 >>> x11-libs/xcb-util-image-0.4.0
> Tue Dec 6 14:10:19 2016 >>> x11-libs/xcb-util-cursor-0.1.3-r1
> Tue Dec 6 14:12:28 2016 >>> x11-libs/startup-notification-0.12-r1
> Tue Dec 6 14:16:37 2016 >>> x11-libs/libwnck-2.31.0
> Tue Dec 6 14:17:04 2016 >>> virtual/eject-0
> Tue Dec 6 14:19:10 2016 >>> dev-libs/libatasmart-0.19-r2
> Tue Dec 6 14:20:21 2016 >>> sys-apps/gptfdisk-1.0.1
> Tue Dec 6 14:29:38 2016 >>> sys-block/parted-3.2-r1
> Tue Dec 6 14:34:50 2016 >>> x11-wm/openbox-3.6.1
> Tue Dec 6 14:36:09 2016 >>> x11-misc/obconf-2.0.4
> Tue Dec 6 14:38:56 2016 >>> sys-apps/portage-2.3.3
> Tue Dec 6 14:41:47 2016 >>> dev-libs/dbus-glib-0.108
> Tue Dec 6 14:43:31 2016 >>> lxde-base/lxappearance-0.6.2
> Tue Dec 6 14:46:23 2016 >>> dev-libs/libunique-1.1.6-r2
> Tue Dec 6 14:49:12 2016 >>> sys-power/upower-0.99.4
> Tue Dec 6 14:55:10 2016 >>> sys-apps/shadow-4.4-r1
> Tue Dec 6 14:58:30 2016 >>> lxde-base/lxsession-0.5.2
> Tue Dec 6 15:07:40 2016 >>> sys-fs/udisks-2.1.8
> Tue Dec 6 15:19:36 2016 >>> gnome-base/gvfs-1.30.2
> Tue Dec 6 15:26:02 2016 >>> x11-libs/libfm-1.2.4
> Tue Dec 6 15:30:07 2016 >>> lxde-base/lxpanel-0.8.2
> Tue Dec 6 15:31:50 2016 >>> x11-misc/pcmanfm-1.2.4
> Tue Dec 6 15:32:17 2016 >>> lxde-base/lxde-meta-0.5.5-r5
> Tue Dec 6 19:38:01 2016 >>> app-text/poppler-data-0.4.7
> Tue Dec 6 19:45:55 2016 >>> app-arch/cpio-2.12-r1
> Tue Dec 6 19:46:31 2016 >>> app-arch/rpm2targz-9.0.0.5g
> Tue Dec 6 19:48:19 2016 >>> media-libs/jbig2dec-0.13
> Tue Dec 6 19:49:14 2016 >>> media-fonts/urw-fonts-2.4.9
> Tue Dec 6 19:50:07 2016 >>> dev-perl/Net-CIDR-Lite-0.210.0
> Tue Dec 6 19:50:51 2016 >>> dev-perl/Crypt-OpenSSL-Bignum-0.60.0
> Tue Dec 6 19:51:33 2016 >>> dev-perl/Crypt-OpenSSL-Random-0.110.0
> Tue Dec 6 19:52:34 2016 >>> dev-perl/TimeDate-2.300.0
> Tue Dec 6 19:53:27 2016 >>> dev-perl/HTML-Tagset-3.200.0-r1
> Tue Dec 6 19:53:54 2016 >>> virtual/perl-XSLoader-0.210.0-r1
> Tue Dec 6 19:54:20 2016 >>> virtual/perl-Digest-1.170.100_rc
> Tue Dec 6 19:54:47 2016 >>> virtual/perl-Time-Local-1.230.0-r4
> Tue Dec 6 19:55:15 2016 >>> virtual/perl-parent-0.234.0-r1
> Tue Dec 6 19:55:41 2016 >>> virtual/perl-Exporter-5.720.0-r2
> Tue Dec 6 19:56:09 2016 >>> virtual/perl-DB_File-1.835.0-r2
> Tue Dec 6 19:56:36 2016 >>> virtual/perl-Pod-Parser-1.630.0-r2
> Tue Dec 6 19:57:03 2016 >>> virtual/perl-Time-HiRes-1.973.300-r1
> Tue Dec 6 19:57:31 2016 >>> virtual/perl-IO-Zlib-1.100.0-r8
> Tue Dec 6 19:57:57 2016 >>> virtual/perl-Archive-Tar-2.40.100_rc
> Tue Dec 6 19:59:48 2016 >>> dev-perl/NetAddr-IP-4.78.0
> Tue Dec 6 20:00:32 2016 >>> dev-perl/HTML-Parser-3.720.0
> Tue Dec 6 20:01:27 2016 >>> dev-perl/Digest-SHA1-2.130.0-r1
> Tue Dec 6 20:02:24 2016 >>> dev-perl/Net-Patricia-1.220.0
> Tue Dec 6 20:03:16 2016 >>> dev-perl/HTTP-Date-6.20.0-r1
> Tue Dec 6 20:04:17 2016 >>> dev-perl/MailTools-2.140.0
> Tue Dec 6 20:05:14 2016 >>> dev-perl/Crypt-OpenSSL-RSA-0.280.0-r2
> Tue Dec 6 20:06:17 2016 >>> dev-perl/Net-DNS-1.40.0
> Tue Dec 6 20:07:20 2016 >>> dev-perl/Encode-Detect-1.10.0-r1
> Tue Dec 6 20:08:19 2016 >>> dev-perl/Mail-DKIM-0.400.0
> Tue Dec 6 20:09:12 2016 >>> dev-perl/Net-DNS-Resolver-Programmable-0.3.0-r1
> Tue Dec 6 20:10:01 2016 >>> dev-perl/URI-1.710.0
> Tue Dec 6 20:11:04 2016 >>> dev-perl/Mail-SPF-2.9.0-r1
> Tue Dec 6 20:13:34 2016 >>> app-text/libpaper-1.1.24-r2
> Tue Dec 6 20:16:48 2016 >>> dev-libs/geoip-1.6.9
> Tue Dec 6 20:17:45 2016 >>> dev-perl/Geo-IP-1.500.0
> Tue Dec 6 20:20:40 2016 >>> dev-libs/libevdev-1.5.5
> Tue Dec 6 20:24:34 2016 >>> net-mail/fetchmail-6.3.26-r2
> Tue Dec 6 20:25:16 2016 >>> app-text/docbook-xml-dtd-4.5-r1
> Tue Dec 6 20:26:24 2016 >>> app-text/asciidoc-8.6.9-r3
> Tue Dec 6 20:51:00 2016 >>> app-text/ghostscript-gpl-9.19
> Tue Dec 6 21:03:21 2016 >>> app-doc/doxygen-1.8.12
> Tue Dec 6 21:30:06 2016 >>> x11-base/xorg-server-1.18.4
> Tue Dec 6 21:32:32 2016 >>> mail-filter/spamassassin-3.4.1-r8
> Tue Dec 6 22:25:57 2016 >>> virtual/perl-Memoize-1.30.100_rc-r1
> Tue Dec 6 22:26:35 2016 >>> virtual/perl-Digest-SHA-5.950.100_rc-r1
> Tue Dec 6 22:27:05 2016 >>> virtual/perl-Digest-1.170.100_rc-r1
> Tue Dec 6 22:27:35 2016 >>> virtual/perl-JSON-PP-2.273.0.100_rc-r1
> Tue Dec 6 22:28:06 2016 >>> virtual/perl-Archive-Tar-2.40.100_rc-r1
> Tue Dec 6 22:28:54 2016 >>> dev-perl/YAML-1.200.0
> Tue Dec 6 22:34:23 2016 >>> mail-client/mutt-1.7.2
> Tue Dec 6 22:41:18 2016 >>> x11-wm/openbox-3.6.1
> Tue Dec 6 22:44:05 2016 >>> lxde-base/lxdm-0.5.3
> Tue Dec 6 22:47:33 2016 >>> lxde-base/lxsession-0.5.2
> Tue Dec 6 22:51:36 2016 >>> lxde-base/lxpanel-0.8.2
>
--
Alan McKinnon
alan.mckinnon@gmail.com
^ permalink raw reply [flat|nested] 8+ messages in thread
* [gentoo-user] Re: newish vbox gentoo guest crashes from startx
2016-12-07 15:48 ` Alan McKinnon
@ 2016-12-08 0:26 ` Harry Putnam
2016-12-08 1:02 ` Alan McKinnon
0 siblings, 1 reply; 8+ messages in thread
From: Harry Putnam @ 2016-12-08 0:26 UTC (permalink / raw
To: gentoo-user
Alan McKinnon <alan.mckinnon@gmail.com> writes:
> On 07/12/2016 17:34, Harry Putnam wrote:
>> Setup:
>>
>> gentoo 32bit vbox guest on win 10 64bit host
>> Installed xorg-server, lxde Meta pkgs and deps
>> (along with many other pkgs ... to many to list
>> here but included at the end)
>>
>> uname -a:
>> Linux g0 4.8.8-gentoo #2 Fri Nov 18 20:16:14 EST 2016 i686 Intel(R)
>> Xeon(R) CPU X5450 @ 3.00GHz GenuineIntel GNU/Linux
>>
>> Theoretically the install should be ready now to run X and lxde.
>> However, when I run `startlxde' nothing whatsoever happens. At least
>> not at the command line or visibly. Prompt just returns lamely.
>>
>> However, if I run startx. The vm crashes clear to power off or
>> sometimes just becomes inoperable with these error messages showing.
>> (Note: nothing can be clicked moved or etc at this point)
>
>
>
> Your first problem seems to be you don't have any input or output
> devices. Please post
>
> - eix xorg-server
> - values of INPUT_DEVICES and VIDEO_CARDS from make.conf
> - confirm that you built the kernel with evdev and the kernel module is
> loaded
harry > eix xorg-server
[I] x11-base/xorg-server
Available versions: 1.12.4-r5(0/1.12.4) 1.12.4-r7(0/1.12.4) 1.15.2-r2(0/1.15.2) 1.15.2-r4(0/1.15.2) 1.16.4(0/1.16.1) 1.16.4-r5(0/1.16.1) 1.17.4(0/1.17.4) (~)1.18.0(0/1.18.0) (~)1.18.1(0/1.18.1) (~)1.18.2(0/1.18.2) (~)1.18.3(0/1.18.3) 1.18.4(0/1.18.4) [M](~)1.19.0(0/1.19.0) **9999(0/9999) {dmx doc glamor ipv6 kdrive libressl minimal nptl selinux static-libs +suid systemd tslib +udev unwind wayland xephyr xnest xorg xvfb}
Installed versions: 1.18.4(21:29:32 12/06/16)(doc glamor suid udev xorg -dmx -ipv6 -kdrive -libressl -minimal -selinux -static-libs -systemd -tslib -unwind -wayland -xephyr -xnest -xvfb)
Homepage: https://www.x.org/wiki/
Description: X.Org X servers
------- --------- ---=--- --------- --------
harry > grep VIDEO /etc/portage/make.conf
VIDEO_CARDS="virtualbox"
I don't have anthing in make.conf about Input devices nor have I had
on 2 other gentoo installs that successfully ran lxde.
I've used the same make.conf with little variation on all three
------- ------- ---=--- ------- -------
harry > cd /lib/modules
harry > grep -r evdev.ko *
Binary file 4.8.8-gentoo/modules.dep.bin matches
4.8.8-gentoo/modules.order:kernel/drivers/input/evdev.ko
4.8.8-gentoo/modules.dep:kernel/drivers/input/evdev.ko:
------- ------- ---=--- ------- -------
harry > sudo lsmod
Module Size Used by
vboxguest 171071 0
evdev 8704 0
> There's a decent X11 install page on the gentoo wiki, did you follow it?
> Installing on vbox is not too different from installing on metal except
> you don't use the video driver for the physical card, you use the vbox
> one (it's virtualized).
I used the gentoo lxde wiki, which basically says that once you've got
a basic gentoo install AND the xorg-server is installed you are ready
to install lxde. It recommends using the meta package which I did.
I assumed emerge would take care of dependants.
> Lastly, why a 32 bit guest on a 64 bit host? There's little benefit from
> doing that, and amd64 is far better supported in general than x86_64.
> Plus you just create more work for the host.
Does that have bearing on my problem?
There were two reasons:
1) I hadn't yet found the BIOS switch to turn on Virtualization and
the newer VBox since late 4.XX I think, do not even offer 64 bit
if it is not set in bios. So the vbox version I used didn't have
that on offer.
2) I found the discussions about the new approach with 2 sets of
libraries and so forth to be pretty confusing... don't recall now
exactly what things confused me... so I went straight 32 bit with the
idea it would be less confusing. And for 2 gentoo installs that
seemed to be born out.
Since I had no trouble with those, thought I would stay with the tried
and true approach. But apparently I missed something important or
some such.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [gentoo-user] Re: newish vbox gentoo guest crashes from startx
2016-12-08 0:26 ` [gentoo-user] " Harry Putnam
@ 2016-12-08 1:02 ` Alan McKinnon
2016-12-08 13:49 ` Harry Putnam
0 siblings, 1 reply; 8+ messages in thread
From: Alan McKinnon @ 2016-12-08 1:02 UTC (permalink / raw
To: gentoo-user
On 08/12/2016 02:26, Harry Putnam wrote:
> Alan McKinnon <alan.mckinnon@gmail.com> writes:
>
>> On 07/12/2016 17:34, Harry Putnam wrote:
>>> Setup:
>>>
>>> gentoo 32bit vbox guest on win 10 64bit host
>>> Installed xorg-server, lxde Meta pkgs and deps
>>> (along with many other pkgs ... to many to list
>>> here but included at the end)
>>>
>>> uname -a:
>>> Linux g0 4.8.8-gentoo #2 Fri Nov 18 20:16:14 EST 2016 i686 Intel(R)
>>> Xeon(R) CPU X5450 @ 3.00GHz GenuineIntel GNU/Linux
>>>
>>> Theoretically the install should be ready now to run X and lxde.
>>> However, when I run `startlxde' nothing whatsoever happens. At least
>>> not at the command line or visibly. Prompt just returns lamely.
>>>
>>> However, if I run startx. The vm crashes clear to power off or
>>> sometimes just becomes inoperable with these error messages showing.
>>> (Note: nothing can be clicked moved or etc at this point)
>>
>>
>>
>> Your first problem seems to be you don't have any input or output
>> devices. Please post
>>
>> - eix xorg-server
>> - values of INPUT_DEVICES and VIDEO_CARDS from make.conf
>
>> - confirm that you built the kernel with evdev and the kernel module is
>> loaded
>
> harry > eix xorg-server
> [I] x11-base/xorg-server
> Available versions: 1.12.4-r5(0/1.12.4) 1.12.4-r7(0/1.12.4) 1.15.2-r2(0/1.15.2) 1.15.2-r4(0/1.15.2) 1.16.4(0/1.16.1) 1.16.4-r5(0/1.16.1) 1.17.4(0/1.17.4) (~)1.18.0(0/1.18.0) (~)1.18.1(0/1.18.1) (~)1.18.2(0/1.18.2) (~)1.18.3(0/1.18.3) 1.18.4(0/1.18.4) [M](~)1.19.0(0/1.19.0) **9999(0/9999) {dmx doc glamor ipv6 kdrive libressl minimal nptl selinux static-libs +suid systemd tslib +udev unwind wayland xephyr xnest xorg xvfb}
> Installed versions: 1.18.4(21:29:32 12/06/16)(doc glamor suid udev xorg -dmx -ipv6 -kdrive -libressl -minimal -selinux -static-libs -systemd -tslib -unwind -wayland -xephyr -xnest -xvfb)
> Homepage: https://www.x.org/wiki/
> Description: X.Org X servers
>
> ------- --------- ---=--- --------- --------
>
> harry > grep VIDEO /etc/portage/make.conf
> VIDEO_CARDS="virtualbox"
>
> I don't have anthing in make.conf about Input devices nor have I had
> on 2 other gentoo installs that successfully ran lxde.
>
> I've used the same make.conf with little variation on all three
>
> ------- ------- ---=--- ------- -------
>
> harry > cd /lib/modules
>
> harry > grep -r evdev.ko *
> Binary file 4.8.8-gentoo/modules.dep.bin matches
> 4.8.8-gentoo/modules.order:kernel/drivers/input/evdev.ko
> 4.8.8-gentoo/modules.dep:kernel/drivers/input/evdev.ko:
>
> ------- ------- ---=--- ------- -------
>
> harry > sudo lsmod
> Module Size Used by
> vboxguest 171071 0
> evdev 8704 0
All that looks OK.
AFAIR xorg uses evdev as the default, so if you don't specify it
explicitly, it's what you get.
Just for fun, do you have x11-drivers/xf86-input-evdev emerged?
The only thing I can think of left to check is
emerge @x11-module-rebuild
and see what it will install
>
>
>> There's a decent X11 install page on the gentoo wiki, did you follow it?
>> Installing on vbox is not too different from installing on metal except
>> you don't use the video driver for the physical card, you use the vbox
>> one (it's virtualized).
>
> I used the gentoo lxde wiki, which basically says that once you've got
> a basic gentoo install AND the xorg-server is installed you are ready
> to install lxde. It recommends using the meta package which I did.
>
> I assumed emerge would take care of dependants.
You assume correct
>
>> Lastly, why a 32 bit guest on a 64 bit host? There's little benefit from
>> doing that, and amd64 is far better supported in general than x86_64.
>> Plus you just create more work for the host.
>
> Does that have bearing on my problem?
Not really. I noticed and wondered. We can ignore it for the rest of the
discussion
>
> There were two reasons:
> 1) I hadn't yet found the BIOS switch to turn on Virtualization and
> the newer VBox since late 4.XX I think, do not even offer 64 bit
> if it is not set in bios. So the vbox version I used didn't have
> that on offer.
>
> 2) I found the discussions about the new approach with 2 sets of
> libraries and so forth to be pretty confusing... don't recall now
> exactly what things confused me... so I went straight 32 bit with the
> idea it would be less confusing. And for 2 gentoo installs that
> seemed to be born out.
>
> Since I had no trouble with those, thought I would stay with the tried
> and true approach. But apparently I missed something important or
> some such.
>
>
--
Alan McKinnon
alan.mckinnon@gmail.com
^ permalink raw reply [flat|nested] 8+ messages in thread
* [gentoo-user] Re: newish vbox gentoo guest crashes from startx
2016-12-08 1:02 ` Alan McKinnon
@ 2016-12-08 13:49 ` Harry Putnam
2016-12-08 20:08 ` Harry Putnam
2016-12-09 14:17 ` Harry Putnam
0 siblings, 2 replies; 8+ messages in thread
From: Harry Putnam @ 2016-12-08 13:49 UTC (permalink / raw
To: gentoo-user
Alan McKinnon <alan.mckinnon@gmail.com> writes:
> On 08/12/2016 02:26, Harry Putnam wrote:
>> Alan McKinnon <alan.mckinnon@gmail.com> writes:
>>
[...]
>>>> Theoretically the install should be ready now to run X and lxde.
>>>> However, when I run `startlxde' nothing whatsoever happens. At least
>>>> not at the command line or visibly. Prompt just returns lamely.
>>>>
>>>> However, if I run startx. The vm crashes clear to power off or
>>>> sometimes just becomes inoperable with these error messages showing.
>>>> (Note: nothing can be clicked moved or etc at this point)
>>>
>>>
>>>
>>> Your first problem seems to be you don't have any input or output
>>> devices. Please post
>>>
>>> - eix xorg-server
>>> - values of INPUT_DEVICES and VIDEO_CARDS from make.conf
>>
>>> - confirm that you built the kernel with evdev and the kernel module is
>>> loaded
>>
>> harry > eix xorg-server
>> [I] x11-base/xorg-server
[...]
>> harry > grep VIDEO /etc/portage/make.conf
>> VIDEO_CARDS="virtualbox"
>>
>> I don't have anthing in make.conf about Input devices nor have I had
>> on 2 other gentoo installs that successfully ran lxde.
>>
>> I've used the same make.conf with little variation on all three
>>
>> ------- ------- ---=--- ------- -------
>>
>> harry > cd /lib/modules
>>
>> harry > grep -r evdev.ko *
>> Binary file 4.8.8-gentoo/modules.dep.bin matches
>> 4.8.8-gentoo/modules.order:kernel/drivers/input/evdev.ko
>> 4.8.8-gentoo/modules.dep:kernel/drivers/input/evdev.ko:
>>
>> ------- ------- ---=--- ------- -------
>>
>> harry > sudo lsmod
>> Module Size Used by
>> vboxguest 171071 0
>> evdev 8704 0
>
>
>
> All that looks OK.
> AFAIR xorg uses evdev as the default, so if you don't specify it
> explicitly, it's what you get.
Is there something I should be specify explicitly?
I guess you mean in make.conf with INPUT_DEVICES=
> Just for fun, do you have x11-drivers/xf86-input-evdev emerged?
harry > eix x11-drivers/xf86-input-evdev
[I] x11-drivers/xf86-input-evdev
Available versions: 2.9.1 2.9.2 2.10.3 (~)2.10.4
Installed versions: 2.10.4(22:57:23 11/18/16)
Homepage: https://www.x.org/wiki/
Description: Generic Linux input driver
I'm currently trying to compare what is installed on another gentoo
guest on a solaris host with what I have on this one in the x11
department, using qlop -l but it gets a bit difficult with updates
showing the same base-names repeatedly on that host since its been in
business quite a bit longer.
Thought about using uniq and sort in someway to ascertain things but
have totally forgotten how to use it, I even wrote an awk script once
to uniqify lists, but of course it appears to have gone the way of the
doodoo bird.
AAR, it appears so far to have the same stuff on each. So there still
must be something basic different.
> The only thing I can think of left to check is
> emerge @x11-module-rebuild
> and see what it will install
[ebuild R ] x11-base/xorg-server-1.18.4:0/1.18.4::gentoo USE="doc glamor suid udev xorg -dmx -ipv6 -kdrive -libressl -minimal (-selinux) -static-libs -systemd -tslib -unwind -wayland -xephyr -xnest -xvfb" 0 KiB
[ebuild R ] x11-drivers/xf86-input-mouse-1.9.2::gentoo 0 KiB
[ebuild R ] x11-drivers/xf86-video-virtualbox-5.1.10::gentoo USE="dri" PYTHON_TARGETS="python2_7" 0 KiB
[ebuild R ] x11-drivers/xf86-input-evdev-2.10.4::gentoo 0 KiB
[ebuild R ] x11-drivers/xf86-input-keyboard-1.9.0::gentoo 0 KiB
I'm proceeding with those rebuilds now.
^ permalink raw reply [flat|nested] 8+ messages in thread
* [gentoo-user] Re: newish vbox gentoo guest crashes from startx
2016-12-08 13:49 ` Harry Putnam
@ 2016-12-08 20:08 ` Harry Putnam
2016-12-08 20:40 ` Ian Bloss
2016-12-09 14:17 ` Harry Putnam
1 sibling, 1 reply; 8+ messages in thread
From: Harry Putnam @ 2016-12-08 20:08 UTC (permalink / raw
To: gentoo-user
Harry Putnam <reader@newsguy.com> writes:
[...]
>> The only thing I can think of left to check is
>> emerge @x11-module-rebuild
>> and see what it will install
>
>
> [ebuild R ] x11-base/xorg-server-1.18.4:0/1.18.4::gentoo USE="doc
> glamor suid udev xorg -dmx -ipv6 -kdrive -libressl -minimal (-selinux)
> -static-libs -systemd -tslib -unwind -wayland -xephyr -xnest -xvfb" 0
> KiB
> [ebuild R ] x11-drivers/xf86-input-mouse-1.9.2::gentoo 0 KiB
> [ebuild R ] x11-drivers/xf86-video-virtualbox-5.1.10::gentoo USE="dri"
> PYTHON_TARGETS="python2_7" 0 KiB
> [ebuild R ] x11-drivers/xf86-input-evdev-2.10.4::gentoo 0 KiB
> [ebuild R ] x11-drivers/xf86-input-keyboard-1.9.0::gentoo 0 KiB
>
> I'm proceeding with those rebuilds now.
Rebuilds finished... still:
startlxde has no effect whatever
startx causes a full on crash
Just a point of interest and possible diagnostic data.
The lists below show a group of x11 pkgs that are uniq on a previous
gentoo install that is successfully running lxde. That is, the listed
pkgs are on the successful host but not on the problem host.
I did not think any of them looked like possible causes of my problem.
The second list (of one) below shows a pkg on the problem host that is
not on the succesfull host. Again does not appear to be a possible
cause of my problem
uniq on successful lxde running host gv
x11-apps/bdftopcf
x11-apps/luit
x11-apps/xcursorgen
x11-apps/xkill
x11-apps/xlsfonts
x11-apps/xmessage
x11-apps/xmodmap
x11-apps/xpr
x11-apps/xsetroot
x11-apps/xwd
x11-libs/libXScrnSaver
x11-libs/libXaw3d
x11-libs/pangox-compat
x11-misc/xbindkeys
x11-terms/xterm
x11-themes/sound-theme-freedesktop
Uniq on problem host g0
x11-apps/xrefresh
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [gentoo-user] Re: newish vbox gentoo guest crashes from startx
2016-12-08 20:08 ` Harry Putnam
@ 2016-12-08 20:40 ` Ian Bloss
0 siblings, 0 replies; 8+ messages in thread
From: Ian Bloss @ 2016-12-08 20:40 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 2165 bytes --]
Other thing to keep in mind is if you recently installed/updated virtbox is
to reboot your host to make sure the host drivers have installed correctly,
and make sure your kernel for the guest have the correct modules built.
On Thu, Dec 8, 2016, 12:10 Harry Putnam <reader@newsguy.com> wrote:
> Harry Putnam <reader@newsguy.com> writes:
>
> [...]
>
> >> The only thing I can think of left to check is
> >> emerge @x11-module-rebuild
> >> and see what it will install
> >
> >
> > [ebuild R ] x11-base/xorg-server-1.18.4:0/1.18.4::gentoo USE="doc
> > glamor suid udev xorg -dmx -ipv6 -kdrive -libressl -minimal (-selinux)
> > -static-libs -systemd -tslib -unwind -wayland -xephyr -xnest -xvfb" 0
> > KiB
> > [ebuild R ] x11-drivers/xf86-input-mouse-1.9.2::gentoo 0 KiB
> > [ebuild R ] x11-drivers/xf86-video-virtualbox-5.1.10::gentoo USE="dri"
> > PYTHON_TARGETS="python2_7" 0 KiB
> > [ebuild R ] x11-drivers/xf86-input-evdev-2.10.4::gentoo 0 KiB
> > [ebuild R ] x11-drivers/xf86-input-keyboard-1.9.0::gentoo 0 KiB
> >
> > I'm proceeding with those rebuilds now.
>
> Rebuilds finished... still:
> startlxde has no effect whatever
>
> startx causes a full on crash
>
> Just a point of interest and possible diagnostic data.
>
> The lists below show a group of x11 pkgs that are uniq on a previous
> gentoo install that is successfully running lxde. That is, the listed
> pkgs are on the successful host but not on the problem host.
>
> I did not think any of them looked like possible causes of my problem.
>
> The second list (of one) below shows a pkg on the problem host that is
> not on the succesfull host. Again does not appear to be a possible
> cause of my problem
>
>
> uniq on successful lxde running host gv
>
> x11-apps/bdftopcf
> x11-apps/luit
> x11-apps/xcursorgen
> x11-apps/xkill
> x11-apps/xlsfonts
> x11-apps/xmessage
> x11-apps/xmodmap
> x11-apps/xpr
> x11-apps/xsetroot
> x11-apps/xwd
> x11-libs/libXScrnSaver
> x11-libs/libXaw3d
> x11-libs/pangox-compat
> x11-misc/xbindkeys
> x11-terms/xterm
> x11-themes/sound-theme-freedesktop
>
>
> Uniq on problem host g0
>
> x11-apps/xrefresh
>
>
>
[-- Attachment #2: Type: text/html, Size: 3968 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* [gentoo-user] Re: newish vbox gentoo guest crashes from startx
2016-12-08 13:49 ` Harry Putnam
2016-12-08 20:08 ` Harry Putnam
@ 2016-12-09 14:17 ` Harry Putnam
1 sibling, 0 replies; 8+ messages in thread
From: Harry Putnam @ 2016-12-09 14:17 UTC (permalink / raw
To: gentoo-user
Harry Putnam <reader@newsguy.com> writes:
> [ebuild R ] x11-base/xorg-server-1.18.4:0/1.18.4::gentoo USE="doc
> glamor suid udev xorg -dmx -ipv6 -kdrive -libressl -minimal (-selinux)
> -static-libs -systemd -tslib -unwind -wayland -xephyr -xnest -xvfb" 0
> KiB
> [ebuild R ] x11-drivers/xf86-input-mouse-1.9.2::gentoo 0 KiB
> [ebuild R ] x11-drivers/xf86-video-virtualbox-5.1.10::gentoo USE="dri"
> PYTHON_TARGETS="python2_7" 0 KiB
> [ebuild R ] x11-drivers/xf86-input-evdev-2.10.4::gentoo 0 KiB
> [ebuild R ] x11-drivers/xf86-input-keyboard-1.9.0::gentoo 0 KiB
>
> I'm proceeding with those rebuilds now.
As posted previously there was no change in behavior following above
activity still `startlxde' gets no response, just a returned prompt
after a very brief pause (maybe 1.5 sec).
startx still causes a full bodied crash.
Further... sometimes a feeze happens when none of the logins are
active. Can't tell what activity brings it about.
So, I'm guessing there is some underlying problem that has yet to be
uncovered. I'm mostly out of ideas.
Still hoping someone will have some notions about how to further
diagnose this install. I'm checking logs and watching behavior. I'll
keep the install as command line only for mail for now...
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2016-12-09 14:18 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-12-07 15:34 [gentoo-user] newish vbox gentoo guest crashes from startx Harry Putnam
2016-12-07 15:48 ` Alan McKinnon
2016-12-08 0:26 ` [gentoo-user] " Harry Putnam
2016-12-08 1:02 ` Alan McKinnon
2016-12-08 13:49 ` Harry Putnam
2016-12-08 20:08 ` Harry Putnam
2016-12-08 20:40 ` Ian Bloss
2016-12-09 14:17 ` Harry Putnam
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox