[gentoo-user] Another issue/questions updating udev from 164-r2 to 171-r5

[gentoo-user] Another issue/questions updating udev from 164-r2 to 171-r5

[Tanstaafl]

I just updated these, and am unsure how to deal with the issues...

First issue:

***************************

Found sources for kernel version:
     3.0.6-gentoo
Checking for suitable kernel configuration options...
ERROR: setup
   CONFIG_BLK_DEV_BSG:	 is not set when it should be.
WARN: setup
Please check to make sure these options are set correctly.
Failure to do so may cause unexpected problems.

I can probably find this when make'ing the new kernel, but if someone 
knows exactly where to find it that would be appreciated.

***************************

Next issue/question (from post install log):

***************************

LOG: postinst

Updating persistent-net rules file

restarting udevd now.

persistent-net does assigning fixed names to network devices.
If you have problems with the persistent-net rules,
just delete the rules file
	rm /etc/udev/rules.d/70-persistent-net.rules
and then reboot.

This may however number your devices in a different way than they are now.

So - how do I know if I need to worry about this?

****************************

Next issue/question (from post install log):

****************************

WARN: postinst

If you build an initramfs including udev, then please
make sure that the /sbin/udevadm binary gets included,
and your scripts changed to use it,as it replaces the
old helper apps udevinfo, udevtrigger, ...

mount options for directory /dev are no longer
set in /etc/udev/udev.conf, but in /etc/fstab
as for other directories.

If you use /dev/md/*, /dev/loop/* or /dev/rd/*,
then please migrate over to using the device names
/dev/md*, /dev/loop* and /dev/ram*.
The devfs-compat rules have been removed.
For reference see Bug #269359.

Rules for /dev/hd* devices have been removed
Please migrate to libata.

How do I know if I need to worry about any of this stuff? I'm a bit lost 
here...

Thanks for any advice/comments...

Charles

Re: [gentoo-user] Another issue/questions updating udev from 164-r2 to 171-r5

[Volker Armin Hemmann]

Am Sonntag, 5. Februar 2012, 12:34:56 schrieb Tanstaafl:
> I just updated these, and am unsure how to deal with the issues...
> 
> First issue:
> 
> ***************************
> 
> Found sources for kernel version:
>      3.0.6-gentoo
> Checking for suitable kernel configuration options...
> ERROR: setup
>    CONFIG_BLK_DEV_BSG:	 is not set when it should be.
> WARN: setup
> Please check to make sure these options are set correctly.
> Failure to do so may cause unexpected problems.
> 
> I can probably find this when make'ing the new kernel, but if someone
> knows exactly where to find it that would be appreciated.

make menuconfig
type /
type in the search term, hit enter
there you go.

-- 
#163933

Re: [gentoo-user] Another issue/questions updating udev from 164-r2 to 171-r5

[Canek Peláez Valdés]

On Sun, Feb 5, 2012 at 11:34 AM, Tanstaafl <tanstaafl@libertytrek.org> wrote:
> I just updated these, and am unsure how to deal with the issues...
>
> First issue:
>
> ***************************
>
> Found sources for kernel version:
>    3.0.6-gentoo
> Checking for suitable kernel configuration options...
> ERROR: setup
>  CONFIG_BLK_DEV_BSG:    is not set when it should be.
> WARN: setup
> Please check to make sure these options are set correctly.
> Failure to do so may cause unexpected problems.
>
> I can probably find this when make'ing the new kernel, but if someone knows
> exactly where to find it that would be appreciated.

For the next time you need to find a kernel option:

1. go to /usr/src/linux
2. make menuconfig
3. press "/" (this activates search)
4. enter the config option you are looking
5. press Enter

The menu configurator will tell you where is the option you are
looking for, in this cas (CONFIG_BLK_DEV_BSG):

Symbol: BLK_DEV_BSG [=n]
Type  : boolean
Prompt: Block layer SG support v4
   Defined at block/Kconfig:50
   Depends on: BLOCK [=y]
   Location:
      -> Enable the block layer (BLOCK [=y])
   Selected by: BLK_DEV_BSGLIB [=n] && BLOCK [=y] || SCSI_SAS_ATTRS
[=n] && SCSI [=y]

As you can see, it's an option at the top of the kernel menu config.

> ***************************
>
> Next issue/question (from post install log):
>
> ***************************
>
> LOG: postinst
>
> Updating persistent-net rules file
>
> restarting udevd now.
>
> persistent-net does assigning fixed names to network devices.
> If you have problems with the persistent-net rules,
> just delete the rules file
>        rm /etc/udev/rules.d/70-persistent-net.rules
> and then reboot.
>
> This may however number your devices in a different way than they are now.
>
> So - how do I know if I need to worry about this?

Reboot, if your network works, everything is fine. If it's not, remove
the file /etc/udev/rules.d/70-persistent-net.rules (don't worry, it's
autogenerated), and reboot. If the problem persists, just check that
the names in that file correspond to the services in /etc/init.d. For
example, mine says

# PCI device 0x10ec:0x8136 (r8169)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
ATTR{address}=="40:61:86:4e:a6:57", ATTR{dev_id}=="0x0",
ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

So (if I used OpenRC) I would need to check that /etc/init.d/net.eth0
it's a symlink to /etc/init.d/net.lo.


> ****************************
>
> Next issue/question (from post install log):
>
> ****************************
>
> WARN: postinst
>
> If you build an initramfs including udev, then please
> make sure that the /sbin/udevadm binary gets included,
> and your scripts changed to use it,as it replaces the
> old helper apps udevinfo, udevtrigger, ...
>
> mount options for directory /dev are no longer
> set in /etc/udev/udev.conf, but in /etc/fstab
> as for other directories.
>
> If you use /dev/md/*, /dev/loop/* or /dev/rd/*,
> then please migrate over to using the device names
> /dev/md*, /dev/loop* and /dev/ram*.
> The devfs-compat rules have been removed.
> For reference see Bug #269359.
>
> Rules for /dev/hd* devices have been removed
> Please migrate to libata.
>
> How do I know if I need to worry about any of this stuff? I'm a bit lost
> here...

Do you use an initramfs? Look at /boot/grub/grub.conf, is there a line
starting with "initrd"? If not, worry not.

> Thanks for any advice/comments...

Regards.
-- 
Canek Peláez Valdés
Posgrado en Ciencia e Ingeniería de la Computación
Universidad Nacional Autónoma de México

Re: [gentoo-user] Another issue/questions updating udev from 164-r2 to 171-r5

[Tanstaafl]

On 2012-02-05 12:45 PM, Volker Armin Hemmann 
<volkerarmin@googlemail.com> wrote:
>> Checking for suitable kernel configuration options...
>> ERROR: setup
>>     CONFIG_BLK_DEV_BSG:	 is not set when it should be.
>> WARN: setup
>> Please check to make sure these options are set correctly.
>> Failure to do so may cause unexpected problems.
>>
>> I can probably find this when make'ing the new kernel, but if someone
>> knows exactly where to find it that would be appreciated.

> make menuconfig
> type /
> type in the search term, hit enter
> there you go.

Cool, didn't know about this one... thanks...

Re: [gentoo-user] Another issue/questions updating udev from 164-r2 to 171-r5

[Tanstaafl]

On 2012-02-05 12:47 PM, Canek Peláez Valdés <caneko@gmail.com> wrote:
> On Sun, Feb 5, 2012 at 11:34 AM, Tanstaafl<tanstaafl@libertytrek.org>  wrote:
> For the next time you need to find a kernel option:
>
> 1. go to /usr/src/linux
> 2. make menuconfig
> 3. press "/" (this activates search)
> 4. enter the config option you are looking
> 5. press Enter
<snip>
> As you can see, it's an option at the top of the kernel menu config.

Yep, many thanks to you (and Volker) for pointing out how to search for 
terms...

> Reboot, if your network works, everything is fine. If it's not, remove
> the file /etc/udev/rules.d/70-persistent-net.rules (don't worry, it's
> autogenerated), and reboot. If the problem persists, just check that
> the names in that file correspond to the services in /etc/init.d. For
> example, mine says
>
> # PCI device 0x10ec:0x8136 (r8169)
> SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
> ATTR{address}=="40:61:86:4e:a6:57", ATTR{dev_id}=="0x0",
> ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
>
> So (if I used OpenRC) I would need to check that /etc/init.d/net.eth0
> it's a symlink to /etc/init.d/net.lo.

Ok, this makes sense, thanks!

>> ****************************
>>
>> Next issue/question (from post install log):
>>
>> ****************************
>>
>> WARN: postinst
>>
>> If you build an initramfs including udev, then please
>> make sure that the /sbin/udevadm binary gets included,
>> and your scripts changed to use it,as it replaces the
>> old helper apps udevinfo, udevtrigger, ...
>>
>> mount options for directory /dev are no longer
>> set in /etc/udev/udev.conf, but in /etc/fstab
>> as for other directories.
>>
>> If you use /dev/md/*, /dev/loop/* or /dev/rd/*,
>> then please migrate over to using the device names
>> /dev/md*, /dev/loop* and /dev/ram*.
>> The devfs-compat rules have been removed.
>> For reference see Bug #269359.
>>
>> Rules for /dev/hd* devices have been removed
>> Please migrate to libata.
>>
>> How do I know if I need to worry about any of this stuff? I'm a bit lost
>> here...
>
> Do you use an initramfs? Look at /boot/grub/grub.conf, is there a line
> starting with "initrd"? If not, worry not.

Ok, I apparently don't, but... are you saying that all of the stuff that 
follows the initramfs warning *all* pertains to using an initramfs?

If so, many thanks again, I'll have to make a note of this in my 
maintenance manual...

:)

Re: [gentoo-user] Another issue/questions updating udev from 164-r2 to 171-r5

[Canek Peláez Valdés]

On Sun, Feb 5, 2012 at 12:21 PM, Tanstaafl <tanstaafl@libertytrek.org> wrote:
[snip]
> Ok, I apparently don't, but... are you saying that all of the stuff that
> follows the initramfs warning *all* pertains to using an initramfs?

No, you're right; this:

mount options for directory /dev are no longer
set in /etc/udev/udev.conf, but in /etc/fstab
as for other directories.

You only have to worry if you set mount options using udev; almost
nobody did that. If you did (I think you'll remember) you only need to
set the mount options in fstab (which is what the Gentoo Handbook
describes). This line:

If you use /dev/md/*, /dev/loop/* or /dev/rd/*,
then please migrate over to using the device names
/dev/md*, /dev/loop* and /dev/ram*.
The devfs-compat rules have been removed.
For reference see Bug #269359.

Again, I think you'll remember if you used any of those devices, so
you are probably fine. And lastly:

Rules for /dev/hd* devices have been removed
Please migrate to libata.

If you don't have IDE devices, nothing to worry about.

Regards.
-- 
Canek Peláez Valdés
Posgrado en Ciencia e Ingeniería de la Computación
Universidad Nacional Autónoma de México