From: "Canek Peláez Valdés" <caneko@gmail.com>
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] Wireless network card not loaded on first boot after shutdown
Date: Wed, 2 Nov 2011 12:39:33 -0700 [thread overview]
Message-ID: <CADPrc80b7rz5zrFMCJYOvLjkOPdZHii95Z7p8fsZiN6AzWCTeQ@mail.gmail.com> (raw)
In-Reply-To: <4EB11B8A.5090609@darkmetatron.de>
On Wed, Nov 2, 2011 at 3:29 AM, Sebastian Beßler
<sebastian@darkmetatron.de> wrote:
> Hi,
>
> I have a wireless card that works most of the time perfect with the
> ath9k kernel module but not on first boot after a few hours long shutdown.
>
> * Bringing up interface wlan0
> * ERROR: interface wlan0 does not exist
> * Ensure that you have loaded the correct kernel module for your hardware
> * ERROR: net.wlan0 failed to start
>
> A reboot fixes the problem.
> The kernel module loads without error in both cases.
>
> # uname -r
> 3.1.0-gentoo
>
> # lspci -v
> 03:07.0 Network controller: Atheros Communications Inc. Device 002d (rev 01)
> Subsystem: Atheros Communications Inc. Device 0300
> Flags: bus master, 66MHz, medium devsel, latency 176, IRQ 21
> Memory at fdce0000 (32-bit, non-prefetchable) [size=64K]
> Capabilities: [44] Power Management version 2
> Kernel driver in use: ath9k
> Kernel modules: ath9k
>
> Greetings
Does the wireless card needs a firmware? Do you use an initramfs? I
ask since my iwlagn wireless car does, and if I boot using an
initramfs, I need to include the firmware file on it for the card to
work.
Regards.
--
Canek Peláez Valdés
Posgrado en Ciencia e Ingeniería de la Computación
Universidad Nacional Autónoma de México
next prev parent reply other threads:[~2011-11-02 19:41 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-02 10:29 [gentoo-user] Wireless network card not loaded on first boot after shutdown Sebastian Beßler
2011-11-02 19:39 ` Canek Peláez Valdés [this message]
2011-11-03 13:16 ` Sebastian Beßler
2011-11-03 22:57 ` Mick
2011-11-04 9:17 ` Sebastian Beßler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CADPrc80b7rz5zrFMCJYOvLjkOPdZHii95Z7p8fsZiN6AzWCTeQ@mail.gmail.com \
--to=caneko@gmail.com \
--cc=gentoo-user@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox