[gentoo-user]Problem when upgrate to grub2

[gentoo-user]Problem when upgrate to grub2

[赵佳晖]

[-- Attachment #1: Type: text/plain, Size: 2792 bytes --]

    Hello, everyone. I want upgrade grub to grub2 , so i follow the
doc<http://dev.gentoo.org/~scarabeus/grub-2-guide.xml>and
wiki <http://en.gentoo-wiki.com/wiki/Grub2#Installation> . But when i use
the command: "emerge -av sys-boot/grub:2"
it comes error :
 * Running autopoint --force ...                                         [
!! ]

 * Failed Running autopoint !
 *
 * Include in your bugreport the contents of:
 *
 *   /var/tmp/portage/sys-boot/grub-9999/temp/autopoint.out

 * ERROR: sys-boot/grub-9999 failed (prepare phase):
 *   Failed Running autopoint !
 *
 * Call stack:
 *     ebuild.sh, line   85:  Called src_prepare
 *   environment, line 3164:  Called source './autogen.sh'
 *    autogen.sh, line   70:  Called eautoreconf '-vi'
 *   environment, line 1021:  Called eautopoint '--force'
 *   environment, line  990:  Called autotools_run_tool 'autopoint'
'--force'
 *   environment, line  665:  Called die
 * The specific snippet of code:
 *           die "Failed Running $1 !";
 *
 * If you need support, post the output of 'emerge --info
=sys-boot/grub-9999',
 * the complete build log and the output of 'emerge -pqv
=sys-boot/grub-9999'.
 * The complete build log is located at
'/var/tmp/portage/sys-boot/grub-9999/temp/build.log'.
 * The ebuild environment file is located at
'/var/tmp/portage/sys-boot/grub-9999/temp/environment'.
 * S: '/var/tmp/portage/sys-boot/grub-9999/work/grub-9999'

>>> Failed to emerge sys-boot/grub-9999, Log file:

>>>  '/var/tmp/portage/sys-boot/grub-9999/temp/build.log'

 * Messages for package sys-boot/grub-9999:

 * Failed Running autopoint !
 *
 * Include in your bugreport the contents of:
 *
 *   /var/tmp/portage/sys-boot/grub-9999/temp/autopoint.out
 * ERROR: sys-boot/grub-9999 failed (prepare phase):
 *   Failed Running autopoint !
 *
 * Call stack:
 *     ebuild.sh, line   85:  Called src_prepare
 *   environment, line 3164:  Called source './autogen.sh'
 *    autogen.sh, line   70:  Called eautoreconf '-vi'
 *   environment, line 1021:  Called eautopoint '--force'
 *   environment, line  990:  Called autotools_run_tool 'autopoint'
'--force'
 *   environment, line  665:  Called die
 * The specific snippet of code:
 *           die "Failed Running $1 !";
 *
 * If you need support, post the output of 'emerge --info
=sys-boot/grub-9999',
 * the complete build log and the output of 'emerge -pqv
=sys-boot/grub-9999'.
 * The complete build log is located at
'/var/tmp/portage/sys-boot/grub-9999/temp/build.log'.
 * The ebuild environment file is located at
'/var/tmp/portage/sys-boot/grub-9999/temp/environment'.
 * S: '/var/tmp/portage/sys-boot/grub-9999/work/grub-9999'

Did anyone know how did this happen ?

-- 
好好学习，天天向上！！！

[-- Attachment #2: Type: text/html, Size: 4444 bytes --]

Re: [gentoo-user]Problem when upgrate to grub2

[Salvatore Borgia]

[-- Attachment #1: Type: text/plain, Size: 3062 bytes --]

hi, see here <http://forums-web1.gentoo.org/viewtopic-t-924710-start-0.html>

2012/6/6 赵佳晖 <jiahui.tar.gz@gmail.com>

>     Hello, everyone. I want upgrade grub to grub2 , so i follow the doc<http://dev.gentoo.org/~scarabeus/grub-2-guide.xml>and
> wiki <http://en.gentoo-wiki.com/wiki/Grub2#Installation> . But when i use
> the command: "emerge -av sys-boot/grub:2"
> it comes error :
>  * Running autopoint --force ...                                         [
> !! ]
>
>  * Failed Running autopoint !
>  *
>  * Include in your bugreport the contents of:
>  *
>  *   /var/tmp/portage/sys-boot/grub-9999/temp/autopoint.out
>
>  * ERROR: sys-boot/grub-9999 failed (prepare phase):
>  *   Failed Running autopoint !
>  *
>  * Call stack:
>  *     ebuild.sh, line   85:  Called src_prepare
>  *   environment, line 3164:  Called source './autogen.sh'
>  *    autogen.sh, line   70:  Called eautoreconf '-vi'
>  *   environment, line 1021:  Called eautopoint '--force'
>  *   environment, line  990:  Called autotools_run_tool 'autopoint'
> '--force'
>  *   environment, line  665:  Called die
>  * The specific snippet of code:
>  *           die "Failed Running $1 !";
>  *
>  * If you need support, post the output of 'emerge --info
> =sys-boot/grub-9999',
>  * the complete build log and the output of 'emerge -pqv
> =sys-boot/grub-9999'.
>  * The complete build log is located at
> '/var/tmp/portage/sys-boot/grub-9999/temp/build.log'.
>  * The ebuild environment file is located at
> '/var/tmp/portage/sys-boot/grub-9999/temp/environment'.
>  * S: '/var/tmp/portage/sys-boot/grub-9999/work/grub-9999'
>
> >>> Failed to emerge sys-boot/grub-9999, Log file:
>
> >>>  '/var/tmp/portage/sys-boot/grub-9999/temp/build.log'
>
>  * Messages for package sys-boot/grub-9999:
>
>  * Failed Running autopoint !
>  *
>  * Include in your bugreport the contents of:
>  *
>  *   /var/tmp/portage/sys-boot/grub-9999/temp/autopoint.out
>  * ERROR: sys-boot/grub-9999 failed (prepare phase):
>  *   Failed Running autopoint !
>  *
>  * Call stack:
>  *     ebuild.sh, line   85:  Called src_prepare
>  *   environment, line 3164:  Called source './autogen.sh'
>  *    autogen.sh, line   70:  Called eautoreconf '-vi'
>  *   environment, line 1021:  Called eautopoint '--force'
>  *   environment, line  990:  Called autotools_run_tool 'autopoint'
> '--force'
>  *   environment, line  665:  Called die
>  * The specific snippet of code:
>  *           die "Failed Running $1 !";
>  *
>  * If you need support, post the output of 'emerge --info
> =sys-boot/grub-9999',
>  * the complete build log and the output of 'emerge -pqv
> =sys-boot/grub-9999'.
>  * The complete build log is located at
> '/var/tmp/portage/sys-boot/grub-9999/temp/build.log'.
>  * The ebuild environment file is located at
> '/var/tmp/portage/sys-boot/grub-9999/temp/environment'.
>  * S: '/var/tmp/portage/sys-boot/grub-9999/work/grub-9999'
>
> Did anyone know how did this happen ?
>
> --
> 好好学习，天天向上！！！
>

[-- Attachment #2: Type: text/html, Size: 5028 bytes --]

Re: [gentoo-user]Problem when upgrate to grub2

[赵佳晖]

[-- Attachment #1: Type: text/plain, Size: 3324 bytes --]

I have used the command: emerge sys-devel/gettext ,and i'm also run the
command python-update. It seems didn't work for me.

2012/6/6 Salvatore Borgia <salvo2789@gmail.com>

> hi, see here<http://forums-web1.gentoo.org/viewtopic-t-924710-start-0.html>
>
> 2012/6/6 赵佳晖 <jiahui.tar.gz@gmail.com>
>
>>     Hello, everyone. I want upgrade grub to grub2 , so i follow the doc<http://dev.gentoo.org/~scarabeus/grub-2-guide.xml>and
>> wiki <http://en.gentoo-wiki.com/wiki/Grub2#Installation> . But when i
>> use the command: "emerge -av sys-boot/grub:2"
>> it comes error :
>>  * Running autopoint --force ...
>> [ !! ]
>>
>>  * Failed Running autopoint !
>>  *
>>  * Include in your bugreport the contents of:
>>  *
>>  *   /var/tmp/portage/sys-boot/grub-9999/temp/autopoint.out
>>
>>  * ERROR: sys-boot/grub-9999 failed (prepare phase):
>>  *   Failed Running autopoint !
>>  *
>>  * Call stack:
>>  *     ebuild.sh, line   85:  Called src_prepare
>>  *   environment, line 3164:  Called source './autogen.sh'
>>  *    autogen.sh, line   70:  Called eautoreconf '-vi'
>>  *   environment, line 1021:  Called eautopoint '--force'
>>  *   environment, line  990:  Called autotools_run_tool 'autopoint'
>> '--force'
>>  *   environment, line  665:  Called die
>>  * The specific snippet of code:
>>  *           die "Failed Running $1 !";
>>  *
>>  * If you need support, post the output of 'emerge --info
>> =sys-boot/grub-9999',
>>  * the complete build log and the output of 'emerge -pqv
>> =sys-boot/grub-9999'.
>>  * The complete build log is located at
>> '/var/tmp/portage/sys-boot/grub-9999/temp/build.log'.
>>  * The ebuild environment file is located at
>> '/var/tmp/portage/sys-boot/grub-9999/temp/environment'.
>>  * S: '/var/tmp/portage/sys-boot/grub-9999/work/grub-9999'
>>
>> >>> Failed to emerge sys-boot/grub-9999, Log file:
>>
>> >>>  '/var/tmp/portage/sys-boot/grub-9999/temp/build.log'
>>
>>  * Messages for package sys-boot/grub-9999:
>>
>>  * Failed Running autopoint !
>>  *
>>  * Include in your bugreport the contents of:
>>  *
>>  *   /var/tmp/portage/sys-boot/grub-9999/temp/autopoint.out
>>  * ERROR: sys-boot/grub-9999 failed (prepare phase):
>>  *   Failed Running autopoint !
>>  *
>>  * Call stack:
>>  *     ebuild.sh, line   85:  Called src_prepare
>>  *   environment, line 3164:  Called source './autogen.sh'
>>  *    autogen.sh, line   70:  Called eautoreconf '-vi'
>>  *   environment, line 1021:  Called eautopoint '--force'
>>  *   environment, line  990:  Called autotools_run_tool 'autopoint'
>> '--force'
>>  *   environment, line  665:  Called die
>>  * The specific snippet of code:
>>  *           die "Failed Running $1 !";
>>  *
>>  * If you need support, post the output of 'emerge --info
>> =sys-boot/grub-9999',
>>  * the complete build log and the output of 'emerge -pqv
>> =sys-boot/grub-9999'.
>>  * The complete build log is located at
>> '/var/tmp/portage/sys-boot/grub-9999/temp/build.log'.
>>  * The ebuild environment file is located at
>> '/var/tmp/portage/sys-boot/grub-9999/temp/environment'.
>>  * S: '/var/tmp/portage/sys-boot/grub-9999/work/grub-9999'
>>
>> Did anyone know how did this happen ?
>>
>> --
>> 好好学习，天天向上！！！
>>
>
>


-- 
好好学习，天天向上！！！

[-- Attachment #2: Type: text/html, Size: 5601 bytes --]

Re: [gentoo-user]Problem when upgrate to grub2

[Salvatore Borgia]

[-- Attachment #1: Type: text/plain, Size: 3514 bytes --]

can you post your autopoint.out please?

2012/6/6 赵佳晖 <jiahui.tar.gz@gmail.com>

> I have used the command: emerge sys-devel/gettext ,and i'm also run the
> command python-update. It seems didn't work for me.
>
>
> 2012/6/6 Salvatore Borgia <salvo2789@gmail.com>
>
>> hi, see here<http://forums-web1.gentoo.org/viewtopic-t-924710-start-0.html>
>>
>> 2012/6/6 赵佳晖 <jiahui.tar.gz@gmail.com>
>>
>>>     Hello, everyone. I want upgrade grub to grub2 , so i follow the doc<http://dev.gentoo.org/~scarabeus/grub-2-guide.xml>and
>>> wiki <http://en.gentoo-wiki.com/wiki/Grub2#Installation> . But when i
>>> use the command: "emerge -av sys-boot/grub:2"
>>> it comes error :
>>>  * Running autopoint --force ...
>>> [ !! ]
>>>
>>>  * Failed Running autopoint !
>>>  *
>>>  * Include in your bugreport the contents of:
>>>  *
>>>  *   /var/tmp/portage/sys-boot/grub-9999/temp/autopoint.out
>>>
>>>  * ERROR: sys-boot/grub-9999 failed (prepare phase):
>>>  *   Failed Running autopoint !
>>>  *
>>>  * Call stack:
>>>  *     ebuild.sh, line   85:  Called src_prepare
>>>  *   environment, line 3164:  Called source './autogen.sh'
>>>  *    autogen.sh, line   70:  Called eautoreconf '-vi'
>>>  *   environment, line 1021:  Called eautopoint '--force'
>>>  *   environment, line  990:  Called autotools_run_tool 'autopoint'
>>> '--force'
>>>  *   environment, line  665:  Called die
>>>  * The specific snippet of code:
>>>  *           die "Failed Running $1 !";
>>>  *
>>>  * If you need support, post the output of 'emerge --info
>>> =sys-boot/grub-9999',
>>>  * the complete build log and the output of 'emerge -pqv
>>> =sys-boot/grub-9999'.
>>>  * The complete build log is located at
>>> '/var/tmp/portage/sys-boot/grub-9999/temp/build.log'.
>>>  * The ebuild environment file is located at
>>> '/var/tmp/portage/sys-boot/grub-9999/temp/environment'.
>>>  * S: '/var/tmp/portage/sys-boot/grub-9999/work/grub-9999'
>>>
>>> >>> Failed to emerge sys-boot/grub-9999, Log file:
>>>
>>> >>>  '/var/tmp/portage/sys-boot/grub-9999/temp/build.log'
>>>
>>>  * Messages for package sys-boot/grub-9999:
>>>
>>>  * Failed Running autopoint !
>>>  *
>>>  * Include in your bugreport the contents of:
>>>  *
>>>  *   /var/tmp/portage/sys-boot/grub-9999/temp/autopoint.out
>>>  * ERROR: sys-boot/grub-9999 failed (prepare phase):
>>>  *   Failed Running autopoint !
>>>  *
>>>  * Call stack:
>>>  *     ebuild.sh, line   85:  Called src_prepare
>>>  *   environment, line 3164:  Called source './autogen.sh'
>>>  *    autogen.sh, line   70:  Called eautoreconf '-vi'
>>>  *   environment, line 1021:  Called eautopoint '--force'
>>>  *   environment, line  990:  Called autotools_run_tool 'autopoint'
>>> '--force'
>>>  *   environment, line  665:  Called die
>>>  * The specific snippet of code:
>>>  *           die "Failed Running $1 !";
>>>  *
>>>  * If you need support, post the output of 'emerge --info
>>> =sys-boot/grub-9999',
>>>  * the complete build log and the output of 'emerge -pqv
>>> =sys-boot/grub-9999'.
>>>  * The complete build log is located at
>>> '/var/tmp/portage/sys-boot/grub-9999/temp/build.log'.
>>>  * The ebuild environment file is located at
>>> '/var/tmp/portage/sys-boot/grub-9999/temp/environment'.
>>>  * S: '/var/tmp/portage/sys-boot/grub-9999/work/grub-9999'
>>>
>>> Did anyone know how did this happen ?
>>>
>>> --
>>> 好好学习，天天向上！！！
>>>
>>
>>
>
>
> --
> 好好学习，天天向上！！！
>

[-- Attachment #2: Type: text/html, Size: 6125 bytes --]

Re: [gentoo-user]Problem when upgrate to grub2

[赵佳晖]

[-- Attachment #1: Type: text/plain, Size: 4044 bytes --]

of course,the autopoint.out is below:

***** autopoint *****
***** PWD: /var/tmp/portage/sys-boot/grub-9999/work/grub-9999
***** autopoint --force

autopoint: *** Missing version: please specify in configure.ac through a
line 'AM_GNU_GETTEXT_VERSION(x.yy.zz)' the gettext version the package is
using
autopoint: *** Stop.


2012/6/6 Salvatore Borgia <salvo2789@gmail.com>

> can you post your autopoint.out please?
>
> 2012/6/6 赵佳晖 <jiahui.tar.gz@gmail.com>
>
>> I have used the command: emerge sys-devel/gettext ,and i'm also run the
>> command python-update. It seems didn't work for me.
>>
>>
>> 2012/6/6 Salvatore Borgia <salvo2789@gmail.com>
>>
>>> hi, see here<http://forums-web1.gentoo.org/viewtopic-t-924710-start-0.html>
>>>
>>> 2012/6/6 赵佳晖 <jiahui.tar.gz@gmail.com>
>>>
>>>>     Hello, everyone. I want upgrade grub to grub2 , so i follow the doc<http://dev.gentoo.org/~scarabeus/grub-2-guide.xml>and
>>>> wiki <http://en.gentoo-wiki.com/wiki/Grub2#Installation> . But when i
>>>> use the command: "emerge -av sys-boot/grub:2"
>>>> it comes error :
>>>>  * Running autopoint --force ...
>>>>   [ !! ]
>>>>
>>>>  * Failed Running autopoint !
>>>>  *
>>>>  * Include in your bugreport the contents of:
>>>>  *
>>>>  *   /var/tmp/portage/sys-boot/grub-9999/temp/autopoint.out
>>>>
>>>>  * ERROR: sys-boot/grub-9999 failed (prepare phase):
>>>>  *   Failed Running autopoint !
>>>>  *
>>>>  * Call stack:
>>>>  *     ebuild.sh, line   85:  Called src_prepare
>>>>  *   environment, line 3164:  Called source './autogen.sh'
>>>>  *    autogen.sh, line   70:  Called eautoreconf '-vi'
>>>>  *   environment, line 1021:  Called eautopoint '--force'
>>>>  *   environment, line  990:  Called autotools_run_tool 'autopoint'
>>>> '--force'
>>>>  *   environment, line  665:  Called die
>>>>  * The specific snippet of code:
>>>>  *           die "Failed Running $1 !";
>>>>  *
>>>>  * If you need support, post the output of 'emerge --info
>>>> =sys-boot/grub-9999',
>>>>  * the complete build log and the output of 'emerge -pqv
>>>> =sys-boot/grub-9999'.
>>>>  * The complete build log is located at
>>>> '/var/tmp/portage/sys-boot/grub-9999/temp/build.log'.
>>>>  * The ebuild environment file is located at
>>>> '/var/tmp/portage/sys-boot/grub-9999/temp/environment'.
>>>>  * S: '/var/tmp/portage/sys-boot/grub-9999/work/grub-9999'
>>>>
>>>> >>> Failed to emerge sys-boot/grub-9999, Log file:
>>>>
>>>> >>>  '/var/tmp/portage/sys-boot/grub-9999/temp/build.log'
>>>>
>>>>  * Messages for package sys-boot/grub-9999:
>>>>
>>>>  * Failed Running autopoint !
>>>>  *
>>>>  * Include in your bugreport the contents of:
>>>>  *
>>>>  *   /var/tmp/portage/sys-boot/grub-9999/temp/autopoint.out
>>>>  * ERROR: sys-boot/grub-9999 failed (prepare phase):
>>>>  *   Failed Running autopoint !
>>>>  *
>>>>  * Call stack:
>>>>  *     ebuild.sh, line   85:  Called src_prepare
>>>>  *   environment, line 3164:  Called source './autogen.sh'
>>>>  *    autogen.sh, line   70:  Called eautoreconf '-vi'
>>>>  *   environment, line 1021:  Called eautopoint '--force'
>>>>  *   environment, line  990:  Called autotools_run_tool 'autopoint'
>>>> '--force'
>>>>  *   environment, line  665:  Called die
>>>>  * The specific snippet of code:
>>>>  *           die "Failed Running $1 !";
>>>>  *
>>>>  * If you need support, post the output of 'emerge --info
>>>> =sys-boot/grub-9999',
>>>>  * the complete build log and the output of 'emerge -pqv
>>>> =sys-boot/grub-9999'.
>>>>  * The complete build log is located at
>>>> '/var/tmp/portage/sys-boot/grub-9999/temp/build.log'.
>>>>  * The ebuild environment file is located at
>>>> '/var/tmp/portage/sys-boot/grub-9999/temp/environment'.
>>>>  * S: '/var/tmp/portage/sys-boot/grub-9999/work/grub-9999'
>>>>
>>>> Did anyone know how did this happen ?
>>>>
>>>> --
>>>> 好好学习，天天向上！！！
>>>>
>>>
>>>
>>
>>
>> --
>> 好好学习，天天向上！！！
>>
>
>


-- 
好好学习，天天向上！！！

[-- Attachment #2: Type: text/html, Size: 6996 bytes --]

Re: [gentoo-user]Problem when upgrate to grub2

[Salvatore Borgia]

[-- Attachment #1: Type: text/plain, Size: 4282 bytes --]

have you tried to add that line to your configure.ac file?

2012/6/6 赵佳晖 <jiahui.tar.gz@gmail.com>

> of course,the autopoint.out is below:
>
> ***** autopoint *****
> ***** PWD: /var/tmp/portage/sys-boot/grub-9999/work/grub-9999
> ***** autopoint --force
>
> autopoint: *** Missing version: please specify in configure.ac through a
> line 'AM_GNU_GETTEXT_VERSION(x.yy.zz)' the gettext version the package is
> using
> autopoint: *** Stop.
>
>
> 2012/6/6 Salvatore Borgia <salvo2789@gmail.com>
>
>> can you post your autopoint.out please?
>>
>> 2012/6/6 赵佳晖 <jiahui.tar.gz@gmail.com>
>>
>>> I have used the command: emerge sys-devel/gettext ,and i'm also run the
>>> command python-update. It seems didn't work for me.
>>>
>>>
>>> 2012/6/6 Salvatore Borgia <salvo2789@gmail.com>
>>>
>>>> hi, see here<http://forums-web1.gentoo.org/viewtopic-t-924710-start-0.html>
>>>>
>>>> 2012/6/6 赵佳晖 <jiahui.tar.gz@gmail.com>
>>>>
>>>>>     Hello, everyone. I want upgrade grub to grub2 , so i follow the
>>>>> doc <http://dev.gentoo.org/~scarabeus/grub-2-guide.xml> and wiki<http://en.gentoo-wiki.com/wiki/Grub2#Installation>. But when i use the command: "emerge
>>>>> -av sys-boot/grub:2"
>>>>> it comes error :
>>>>>  * Running autopoint --force ...
>>>>>   [ !! ]
>>>>>
>>>>>  * Failed Running autopoint !
>>>>>  *
>>>>>  * Include in your bugreport the contents of:
>>>>>  *
>>>>>  *   /var/tmp/portage/sys-boot/grub-9999/temp/autopoint.out
>>>>>
>>>>>  * ERROR: sys-boot/grub-9999 failed (prepare phase):
>>>>>  *   Failed Running autopoint !
>>>>>  *
>>>>>  * Call stack:
>>>>>  *     ebuild.sh, line   85:  Called src_prepare
>>>>>  *   environment, line 3164:  Called source './autogen.sh'
>>>>>  *    autogen.sh, line   70:  Called eautoreconf '-vi'
>>>>>  *   environment, line 1021:  Called eautopoint '--force'
>>>>>  *   environment, line  990:  Called autotools_run_tool 'autopoint'
>>>>> '--force'
>>>>>  *   environment, line  665:  Called die
>>>>>  * The specific snippet of code:
>>>>>  *           die "Failed Running $1 !";
>>>>>  *
>>>>>  * If you need support, post the output of 'emerge --info
>>>>> =sys-boot/grub-9999',
>>>>>  * the complete build log and the output of 'emerge -pqv
>>>>> =sys-boot/grub-9999'.
>>>>>  * The complete build log is located at
>>>>> '/var/tmp/portage/sys-boot/grub-9999/temp/build.log'.
>>>>>  * The ebuild environment file is located at
>>>>> '/var/tmp/portage/sys-boot/grub-9999/temp/environment'.
>>>>>  * S: '/var/tmp/portage/sys-boot/grub-9999/work/grub-9999'
>>>>>
>>>>> >>> Failed to emerge sys-boot/grub-9999, Log file:
>>>>>
>>>>> >>>  '/var/tmp/portage/sys-boot/grub-9999/temp/build.log'
>>>>>
>>>>>  * Messages for package sys-boot/grub-9999:
>>>>>
>>>>>  * Failed Running autopoint !
>>>>>  *
>>>>>  * Include in your bugreport the contents of:
>>>>>  *
>>>>>  *   /var/tmp/portage/sys-boot/grub-9999/temp/autopoint.out
>>>>>  * ERROR: sys-boot/grub-9999 failed (prepare phase):
>>>>>  *   Failed Running autopoint !
>>>>>  *
>>>>>  * Call stack:
>>>>>  *     ebuild.sh, line   85:  Called src_prepare
>>>>>  *   environment, line 3164:  Called source './autogen.sh'
>>>>>  *    autogen.sh, line   70:  Called eautoreconf '-vi'
>>>>>  *   environment, line 1021:  Called eautopoint '--force'
>>>>>  *   environment, line  990:  Called autotools_run_tool 'autopoint'
>>>>> '--force'
>>>>>  *   environment, line  665:  Called die
>>>>>  * The specific snippet of code:
>>>>>  *           die "Failed Running $1 !";
>>>>>  *
>>>>>  * If you need support, post the output of 'emerge --info
>>>>> =sys-boot/grub-9999',
>>>>>  * the complete build log and the output of 'emerge -pqv
>>>>> =sys-boot/grub-9999'.
>>>>>  * The complete build log is located at
>>>>> '/var/tmp/portage/sys-boot/grub-9999/temp/build.log'.
>>>>>  * The ebuild environment file is located at
>>>>> '/var/tmp/portage/sys-boot/grub-9999/temp/environment'.
>>>>>  * S: '/var/tmp/portage/sys-boot/grub-9999/work/grub-9999'
>>>>>
>>>>> Did anyone know how did this happen ?
>>>>>
>>>>> --
>>>>> 好好学习，天天向上！！！
>>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>> 好好学习，天天向上！！！
>>>
>>
>>
>
>
> --
> 好好学习，天天向上！！！
>

[-- Attachment #2: Type: text/html, Size: 7590 bytes --]

Re: [gentoo-user]Problem when upgrate to grub2

[Neil Bothwick]

[-- Attachment #1: Type: text/plain, Size: 351 bytes --]

On Wed, 6 Jun 2012 15:22:28 +0200, Salvatore Borgia wrote:

> > >>> Failed to emerge sys-boot/grub-9999, Log file:  

Why are you trying to install a 9999 version? These are usually pulled
from VCS and therefore may or may not build at any particular time.


-- 
Neil Bothwick

She's always late. Her ancestors arrived on the June flower.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 198 bytes --]