* [gentoo-user] OpenScad produces no visible rendering at all
@ 2017-10-21 1:41 tuxic
2017-10-21 2:32 ` R0b0t1
0 siblings, 1 reply; 5+ messages in thread
From: tuxic @ 2017-10-21 1:41 UTC (permalink / raw
To: Gentoo
Hi,
After installing OpenScad I started an example.
After the loading process ends I hit "preview" -
a script compiling process starts,,,and....
nothing was shown.
Same happens, when I hit "rendering".
from lspci (the smaller card feeds the desktop, the bigger one is for Rendering
with Blender only, I set CUDA_VISIBLE_DEVICES=0)
02:00.0 VGA compatible controller: NVIDIA Corporation GM206 [GeForce GTX 960] (rev a1)
02:00.1 Audio device: NVIDIA Corporation Device 0fba (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 430] (rev a1)
09:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller (rev a1)
Output on OpenScad own terminal after hitting preview of the example "CSG.openscad)
Compiling design (CSG Tree generation)...
ECHO: version = [2015, 3, 0]
Compiling design (CSG Products generation)...
Geometries in cache: 2
Geometry cache size in bytes: 62800
CGAL Polyhedrons in cache: 0
CGAL cache size in bytes: 0
Compiling design (CSG Products normalization)...
Normalized CSG tree has 6 elements
Compile and preview finished.
Total rendering time: 0 hours, 0 minutes, 1 seconds
Outout on the terminal, from which I started OpenScad:
solfire:/home/mccramer>openscad
using visual class 4, id 2b
hijackWindow() context created for LaunchingScreen(0x2ade380, name = "LaunchingScreen") 1
Created Window Surface FBO QSize(620, 418) with samples 8
hijackWindow() context created for MainWindow(0x2b0ed20, name = "MainWindow") 1
Created Window Surface FBO QSize(1920, 1141) with samples 8
hijackWindow() context created for QWidget(0x2b5b010, name = "centralwidget") 2
hijackWindow() context created for QWidget(0x2cab240, name = "mainWidget") 3
hijackWindow() context created for QToolBar(0x2bc6350, name = "viewerToolBar") 4
hijackWindow() context created for QMenuBar(0x2bf2580, name = "menubar") 5
hijackWindow() context created for QStatusBar(0x2c1ca20, name = "statusbar") 6
hijackWindow() context created for QSizeGrip(0x2c1cda0) 7
hijackWindow() context created for QLabel(0x33ff150) 8
hijackWindow() context created for QLabel(0x2b9eb70) 9
hijackWindow() context created for Dock(0x2b05220, name = "editorDock") 10
hijackWindow() context created for Dock(0x2ba9fe0, name = "consoleDock") 11
hijackWindow() context created for QMenu(0x2b02c00, name = "menu_View") 1
Created Window Surface FBO QSize(184, 583) with samples 8
What wrong here?
Why I can't see any rendered output?
Cheers
Meino
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [gentoo-user] OpenScad produces no visible rendering at all
2017-10-21 1:41 [gentoo-user] OpenScad produces no visible rendering at all tuxic
@ 2017-10-21 2:32 ` R0b0t1
2017-10-21 2:42 ` tuxic
0 siblings, 1 reply; 5+ messages in thread
From: R0b0t1 @ 2017-10-21 2:32 UTC (permalink / raw
To: gentoo-user
On Fri, Oct 20, 2017 at 8:41 PM, <tuxic@posteo.de> wrote:
> Hi,
>
> After installing OpenScad I started an example.
> After the loading process ends I hit "preview" -
> a script compiling process starts,,,and....
> nothing was shown.
> Same happens, when I hit "rendering".
>
> from lspci (the smaller card feeds the desktop, the bigger one is for Rendering
> with Blender only, I set CUDA_VISIBLE_DEVICES=0)
> 02:00.0 VGA compatible controller: NVIDIA Corporation GM206 [GeForce GTX 960] (rev a1)
> 02:00.1 Audio device: NVIDIA Corporation Device 0fba (rev a1)
> 09:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 430] (rev a1)
> 09:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller (rev a1)
>
> Output on OpenScad own terminal after hitting preview of the example "CSG.openscad)
> Compiling design (CSG Tree generation)...
> ECHO: version = [2015, 3, 0]
> Compiling design (CSG Products generation)...
> Geometries in cache: 2
> Geometry cache size in bytes: 62800
> CGAL Polyhedrons in cache: 0
> CGAL cache size in bytes: 0
> Compiling design (CSG Products normalization)...
> Normalized CSG tree has 6 elements
> Compile and preview finished.
> Total rendering time: 0 hours, 0 minutes, 1 seconds
>
> Outout on the terminal, from which I started OpenScad:
> solfire:/home/mccramer>openscad
> using visual class 4, id 2b
> hijackWindow() context created for LaunchingScreen(0x2ade380, name = "LaunchingScreen") 1
> Created Window Surface FBO QSize(620, 418) with samples 8
> hijackWindow() context created for MainWindow(0x2b0ed20, name = "MainWindow") 1
> Created Window Surface FBO QSize(1920, 1141) with samples 8
> hijackWindow() context created for QWidget(0x2b5b010, name = "centralwidget") 2
> hijackWindow() context created for QWidget(0x2cab240, name = "mainWidget") 3
> hijackWindow() context created for QToolBar(0x2bc6350, name = "viewerToolBar") 4
> hijackWindow() context created for QMenuBar(0x2bf2580, name = "menubar") 5
> hijackWindow() context created for QStatusBar(0x2c1ca20, name = "statusbar") 6
> hijackWindow() context created for QSizeGrip(0x2c1cda0) 7
> hijackWindow() context created for QLabel(0x33ff150) 8
> hijackWindow() context created for QLabel(0x2b9eb70) 9
> hijackWindow() context created for Dock(0x2b05220, name = "editorDock") 10
> hijackWindow() context created for Dock(0x2ba9fe0, name = "consoleDock") 11
> hijackWindow() context created for QMenu(0x2b02c00, name = "menu_View") 1
> Created Window Surface FBO QSize(184, 583) with samples 8
>
> What wrong here?
> Why I can't see any rendered output?
>
> Cheers
> Meino
>
Hello,
Are you using OpenSCAD interactively? When I used BRL-CAD rendering
and viewing were separate actions. You could render headlessly.
Cheers,
R0b0t1
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [gentoo-user] OpenScad produces no visible rendering at all
2017-10-21 2:32 ` R0b0t1
@ 2017-10-21 2:42 ` tuxic
2017-10-21 2:53 ` R0b0t1
0 siblings, 1 reply; 5+ messages in thread
From: tuxic @ 2017-10-21 2:42 UTC (permalink / raw
To: gentoo-user
On 10/20 09:32, R0b0t1 wrote:
> On Fri, Oct 20, 2017 at 8:41 PM, <tuxic@posteo.de> wrote:
> > Hi,
> >
> > After installing OpenScad I started an example.
> > After the loading process ends I hit "preview" -
> > a script compiling process starts,,,and....
> > nothing was shown.
> > Same happens, when I hit "rendering".
> >
> > from lspci (the smaller card feeds the desktop, the bigger one is for Rendering
> > with Blender only, I set CUDA_VISIBLE_DEVICES=0)
> > 02:00.0 VGA compatible controller: NVIDIA Corporation GM206 [GeForce GTX 960] (rev a1)
> > 02:00.1 Audio device: NVIDIA Corporation Device 0fba (rev a1)
> > 09:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 430] (rev a1)
> > 09:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller (rev a1)
> >
> > Output on OpenScad own terminal after hitting preview of the example "CSG.openscad)
> > Compiling design (CSG Tree generation)...
> > ECHO: version = [2015, 3, 0]
> > Compiling design (CSG Products generation)...
> > Geometries in cache: 2
> > Geometry cache size in bytes: 62800
> > CGAL Polyhedrons in cache: 0
> > CGAL cache size in bytes: 0
> > Compiling design (CSG Products normalization)...
> > Normalized CSG tree has 6 elements
> > Compile and preview finished.
> > Total rendering time: 0 hours, 0 minutes, 1 seconds
> >
> > Outout on the terminal, from which I started OpenScad:
> > solfire:/home/mccramer>openscad
> > using visual class 4, id 2b
> > hijackWindow() context created for LaunchingScreen(0x2ade380, name = "LaunchingScreen") 1
> > Created Window Surface FBO QSize(620, 418) with samples 8
> > hijackWindow() context created for MainWindow(0x2b0ed20, name = "MainWindow") 1
> > Created Window Surface FBO QSize(1920, 1141) with samples 8
> > hijackWindow() context created for QWidget(0x2b5b010, name = "centralwidget") 2
> > hijackWindow() context created for QWidget(0x2cab240, name = "mainWidget") 3
> > hijackWindow() context created for QToolBar(0x2bc6350, name = "viewerToolBar") 4
> > hijackWindow() context created for QMenuBar(0x2bf2580, name = "menubar") 5
> > hijackWindow() context created for QStatusBar(0x2c1ca20, name = "statusbar") 6
> > hijackWindow() context created for QSizeGrip(0x2c1cda0) 7
> > hijackWindow() context created for QLabel(0x33ff150) 8
> > hijackWindow() context created for QLabel(0x2b9eb70) 9
> > hijackWindow() context created for Dock(0x2b05220, name = "editorDock") 10
> > hijackWindow() context created for Dock(0x2ba9fe0, name = "consoleDock") 11
> > hijackWindow() context created for QMenu(0x2b02c00, name = "menu_View") 1
> > Created Window Surface FBO QSize(184, 583) with samples 8
> >
> > What wrong here?
> > Why I can't see any rendered output?
> >
> > Cheers
> > Meino
> >
>
> Hello,
>
> Are you using OpenSCAD interactively? When I used BRL-CAD rendering
> and viewing were separate actions. You could render headlessly.
>
> Cheers,
> R0b0t1
>
OpenScad is an integrated GUI (see: http://www.openscad.org/).
Instead of the 3D-view I only see a black, sometimes yellowish
window shown nothing but an empty space.
Zoommin in/out does not help.
Cheers
Meino
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [gentoo-user] OpenScad produces no visible rendering at all
2017-10-21 2:42 ` tuxic
@ 2017-10-21 2:53 ` R0b0t1
2017-10-21 3:01 ` tuxic
0 siblings, 1 reply; 5+ messages in thread
From: R0b0t1 @ 2017-10-21 2:53 UTC (permalink / raw
To: gentoo-user
On Fri, Oct 20, 2017 at 9:42 PM, <tuxic@posteo.de> wrote:
> On 10/20 09:32, R0b0t1 wrote:
>> On Fri, Oct 20, 2017 at 8:41 PM, <tuxic@posteo.de> wrote:
>> > Hi,
>> >
>> > After installing OpenScad I started an example.
>> > After the loading process ends I hit "preview" -
>> > a script compiling process starts,,,and....
>> > nothing was shown.
>> > Same happens, when I hit "rendering".
>> >
>> > from lspci (the smaller card feeds the desktop, the bigger one is for Rendering
>> > with Blender only, I set CUDA_VISIBLE_DEVICES=0)
>> > 02:00.0 VGA compatible controller: NVIDIA Corporation GM206 [GeForce GTX 960] (rev a1)
>> > 02:00.1 Audio device: NVIDIA Corporation Device 0fba (rev a1)
>> > 09:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 430] (rev a1)
>> > 09:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller (rev a1)
>> >
>> > Output on OpenScad own terminal after hitting preview of the example "CSG.openscad)
>> > Compiling design (CSG Tree generation)...
>> > ECHO: version = [2015, 3, 0]
>> > Compiling design (CSG Products generation)...
>> > Geometries in cache: 2
>> > Geometry cache size in bytes: 62800
>> > CGAL Polyhedrons in cache: 0
>> > CGAL cache size in bytes: 0
>> > Compiling design (CSG Products normalization)...
>> > Normalized CSG tree has 6 elements
>> > Compile and preview finished.
>> > Total rendering time: 0 hours, 0 minutes, 1 seconds
>> >
>> > Outout on the terminal, from which I started OpenScad:
>> > solfire:/home/mccramer>openscad
>> > using visual class 4, id 2b
>> > hijackWindow() context created for LaunchingScreen(0x2ade380, name = "LaunchingScreen") 1
>> > Created Window Surface FBO QSize(620, 418) with samples 8
>> > hijackWindow() context created for MainWindow(0x2b0ed20, name = "MainWindow") 1
>> > Created Window Surface FBO QSize(1920, 1141) with samples 8
>> > hijackWindow() context created for QWidget(0x2b5b010, name = "centralwidget") 2
>> > hijackWindow() context created for QWidget(0x2cab240, name = "mainWidget") 3
>> > hijackWindow() context created for QToolBar(0x2bc6350, name = "viewerToolBar") 4
>> > hijackWindow() context created for QMenuBar(0x2bf2580, name = "menubar") 5
>> > hijackWindow() context created for QStatusBar(0x2c1ca20, name = "statusbar") 6
>> > hijackWindow() context created for QSizeGrip(0x2c1cda0) 7
>> > hijackWindow() context created for QLabel(0x33ff150) 8
>> > hijackWindow() context created for QLabel(0x2b9eb70) 9
>> > hijackWindow() context created for Dock(0x2b05220, name = "editorDock") 10
>> > hijackWindow() context created for Dock(0x2ba9fe0, name = "consoleDock") 11
>> > hijackWindow() context created for QMenu(0x2b02c00, name = "menu_View") 1
>> > Created Window Surface FBO QSize(184, 583) with samples 8
>> >
>> > What wrong here?
>> > Why I can't see any rendered output?
>> >
>> > Cheers
>> > Meino
>> >
>>
>> Hello,
>>
>> Are you using OpenSCAD interactively? When I used BRL-CAD rendering
>> and viewing were separate actions. You could render headlessly.
>>
>> Cheers,
>> R0b0t1
>>
>
> OpenScad is an integrated GUI (see: http://www.openscad.org/).
> Instead of the 3D-view I only see a black, sometimes yellowish
> window shown nothing but an empty space.
>
> Zoommin in/out does not help.
>
Can you set your camera to be viewing the origin? If you can see
something at all I think it unlikely the graphics code is broken.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [gentoo-user] OpenScad produces no visible rendering at all
2017-10-21 2:53 ` R0b0t1
@ 2017-10-21 3:01 ` tuxic
0 siblings, 0 replies; 5+ messages in thread
From: tuxic @ 2017-10-21 3:01 UTC (permalink / raw
To: gentoo-user
On 10/20 09:53, R0b0t1 wrote:
> On Fri, Oct 20, 2017 at 9:42 PM, <tuxic@posteo.de> wrote:
> > On 10/20 09:32, R0b0t1 wrote:
> >> On Fri, Oct 20, 2017 at 8:41 PM, <tuxic@posteo.de> wrote:
> >> > Hi,
> >> >
> >> > After installing OpenScad I started an example.
> >> > After the loading process ends I hit "preview" -
> >> > a script compiling process starts,,,and....
> >> > nothing was shown.
> >> > Same happens, when I hit "rendering".
> >> >
> >> > from lspci (the smaller card feeds the desktop, the bigger one is for Rendering
> >> > with Blender only, I set CUDA_VISIBLE_DEVICES=0)
> >> > 02:00.0 VGA compatible controller: NVIDIA Corporation GM206 [GeForce GTX 960] (rev a1)
> >> > 02:00.1 Audio device: NVIDIA Corporation Device 0fba (rev a1)
> >> > 09:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 430] (rev a1)
> >> > 09:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller (rev a1)
> >> >
> >> > Output on OpenScad own terminal after hitting preview of the example "CSG.openscad)
> >> > Compiling design (CSG Tree generation)...
> >> > ECHO: version = [2015, 3, 0]
> >> > Compiling design (CSG Products generation)...
> >> > Geometries in cache: 2
> >> > Geometry cache size in bytes: 62800
> >> > CGAL Polyhedrons in cache: 0
> >> > CGAL cache size in bytes: 0
> >> > Compiling design (CSG Products normalization)...
> >> > Normalized CSG tree has 6 elements
> >> > Compile and preview finished.
> >> > Total rendering time: 0 hours, 0 minutes, 1 seconds
> >> >
> >> > Outout on the terminal, from which I started OpenScad:
> >> > solfire:/home/mccramer>openscad
> >> > using visual class 4, id 2b
> >> > hijackWindow() context created for LaunchingScreen(0x2ade380, name = "LaunchingScreen") 1
> >> > Created Window Surface FBO QSize(620, 418) with samples 8
> >> > hijackWindow() context created for MainWindow(0x2b0ed20, name = "MainWindow") 1
> >> > Created Window Surface FBO QSize(1920, 1141) with samples 8
> >> > hijackWindow() context created for QWidget(0x2b5b010, name = "centralwidget") 2
> >> > hijackWindow() context created for QWidget(0x2cab240, name = "mainWidget") 3
> >> > hijackWindow() context created for QToolBar(0x2bc6350, name = "viewerToolBar") 4
> >> > hijackWindow() context created for QMenuBar(0x2bf2580, name = "menubar") 5
> >> > hijackWindow() context created for QStatusBar(0x2c1ca20, name = "statusbar") 6
> >> > hijackWindow() context created for QSizeGrip(0x2c1cda0) 7
> >> > hijackWindow() context created for QLabel(0x33ff150) 8
> >> > hijackWindow() context created for QLabel(0x2b9eb70) 9
> >> > hijackWindow() context created for Dock(0x2b05220, name = "editorDock") 10
> >> > hijackWindow() context created for Dock(0x2ba9fe0, name = "consoleDock") 11
> >> > hijackWindow() context created for QMenu(0x2b02c00, name = "menu_View") 1
> >> > Created Window Surface FBO QSize(184, 583) with samples 8
> >> >
> >> > What wrong here?
> >> > Why I can't see any rendered output?
> >> >
> >> > Cheers
> >> > Meino
> >> >
> >>
> >> Hello,
> >>
> >> Are you using OpenSCAD interactively? When I used BRL-CAD rendering
> >> and viewing were separate actions. You could render headlessly.
> >>
> >> Cheers,
> >> R0b0t1
> >>
> >
> > OpenScad is an integrated GUI (see: http://www.openscad.org/).
> > Instead of the 3D-view I only see a black, sometimes yellowish
> > window shown nothing but an empty space.
> >
> > Zoommin in/out does not help.
> >
>
> Can you set your camera to be viewing the origin? If you can see
> something at all I think it unlikely the graphics code is broken.
>
Wait! I found something:
When running blender in parallel, everything works fine.
What the heck...
Cheers
Meino
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2017-10-21 3:01 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-10-21 1:41 [gentoo-user] OpenScad produces no visible rendering at all tuxic
2017-10-21 2:32 ` R0b0t1
2017-10-21 2:42 ` tuxic
2017-10-21 2:53 ` R0b0t1
2017-10-21 3:01 ` tuxic
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox