From: Gregory Fontenele <gregoryfontenele@gmail.com>
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] non-Twinview dual screen setup?
Date: Wed, 6 Apr 2011 12:12:57 -0300 [thread overview]
Message-ID: <BANLkTi=3st5zAUChxFahmcpuTpRm_pKHoA@mail.gmail.com> (raw)
In-Reply-To: <BANLkTinh2V4TRiUCVky0zQ52J+r_PJxs6w@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 21254 bytes --]
want to leave this list but I can not, can someone erase me from this list?
On Wed, Apr 6, 2011 at 12:06, Mark Knecht <markknecht@gmail.com> wrote:
> On Tue, Apr 5, 2011 at 5:00 PM, Neil Bothwick <neil@digimed.co.uk> wrote:
> > On Tue, 5 Apr 2011 15:25:16 -0700, Mark Knecht wrote:
> >
> >> I hooked up second monitor to my Nvidia GTX465 card yesterday and
> >> wanted to get dual screen running. Unfortunately, except for using
> >> Twinview which works fine, I've been unable to do it without Twinview.
> >> Twinview itself isn't bad, but I don't like how ever KDE decision I
> >> have to take (logout, settings, etc.) always starts spanned across my
> >> two monitors. That doesn't happen on my dual screen Intel system.
> >
> > You can change that in the Display & Monitors section of KDE's System
> > Settings.
> >
> >
> > --
> > Neil Bothwick
>
> Hi Neil,
> The problem is that after I'm in KDE it seems the damage is done.
> Settings->Display thing shows only a single 1920x1080 monitor hooked
> to 'default'. The second monitor isn't found at all.
>
> I suspect that what I need to do next is go back and boot the 2
> screen version and see what the X log file actually says.
>
> I'm currently using Twinview where Settings->Display shows both
> monitors. While it's working well there is evidence that X doesn't
> like the monitor settings in the config file I got using
> nvidia-settings. Possibly the EDID values are causing X to not enable
> the second monitor at all in the 2 screen version?
>
> Cheers,
> Mark
>
> mark@c2stable ~ $ cat /var/log/Xorg.0.log
> [ 665.512]
> X.Org X Server 1.9.4
> Release Date: 2011-02-04
> [ 665.512] X Protocol Version 11, Revision 0
> [ 665.512] Build Operating System: Linux 2.6.36-gentoo-r6 x86_64 Gentoo
> [ 665.512] Current Operating System: Linux c2stable 2.6.38-gentoo-r1
> #1 SMP PREEMPT Wed Mar 30 12:24:58 PDT 2011 x86_64
> [ 665.512] Kernel command line: root=/dev/md126
> [ 665.512] Build Date: 13 February 2011 06:29:22AM
> [ 665.512]
> [ 665.512] Current version of pixman: 0.20.2
> [ 665.512] Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> [ 665.512] Markers: (--) probed, (**) from config file, (==) default
> setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> [ 665.512] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 6
> 05:22:43 2011
> [ 665.512] (==) Using config file: "/etc/X11/xorg.conf"
> [ 665.512] (==) Using config directory: "/etc/X11/xorg.conf.d"
> [ 665.512] (==) Using system config directory
> "/usr/share/X11/xorg.conf.d"
> [ 665.512] (==) ServerLayout "Layout0"
> [ 665.512] (**) |-->Screen "Screen0" (0)
> [ 665.512] (**) | |-->Monitor "Monitor0"
> [ 665.512] (**) | |-->Device "Device0"
> [ 665.512] (**) |-->Input Device "Keyboard0"
> [ 665.512] (**) |-->Input Device "Mouse0"
> [ 665.512] (==) Automatically adding devices
> [ 665.512] (==) Automatically enabling devices
> [ 665.512] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
> [ 665.512] Entry deleted from font path.
> [ 665.512] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
> [ 665.512] Entry deleted from font path.
> [ 665.512] (==) FontPath set to:
> /usr/share/fonts/misc/,
> /usr/share/fonts/Type1/,
> /usr/share/fonts/100dpi/,
> /usr/share/fonts/75dpi/
> [ 665.512] (==) ModulePath set to "/usr/lib64/xorg/modules"
> [ 665.512] (WW) AllowEmptyInput is on, devices using drivers 'kbd',
> 'mouse' or 'vmmouse' will be disabled.
> [ 665.512] (WW) Disabling Keyboard0
> [ 665.512] (WW) Disabling Mouse0
> [ 665.512] (II) Loader magic: 0x7ca080
> [ 665.512] (II) Module ABI versions:
> [ 665.512] X.Org ANSI C Emulation: 0.4
> [ 665.512] X.Org Video Driver: 8.0
> [ 665.512] X.Org XInput driver : 11.0
> [ 665.512] X.Org Server Extension : 4.0
> [ 665.513] (--) PCI:*(0:2:0:0) 10de:06c4:3842:1467 rev 163, Mem @
> 0xf8000000/33554432, 0xd8000000/134217728, 0xd4000000/67108864, I/O @
> 0x0000ac00/128, BIOS @ 0x????????/524288
> [ 665.513] (II) Open ACPI successful (/var/run/acpid.socket)
> [ 665.513] (II) LoadModule: "extmod"
> [ 665.513] (II) Loading
> /usr/lib64/xorg/modules/extensions/libextmod.so
> [ 665.513] (II) Module extmod: vendor="X.Org Foundation"
> [ 665.513] compiled for 1.9.4, module version = 1.0.0
> [ 665.513] Module class: X.Org Server Extension
> [ 665.513] ABI class: X.Org Server Extension, version 4.0
> [ 665.513] (II) Loading extension MIT-SCREEN-SAVER
> [ 665.513] (II) Loading extension XFree86-VidModeExtension
> [ 665.513] (II) Loading extension XFree86-DGA
> [ 665.513] (II) Loading extension DPMS
> [ 665.513] (II) Loading extension XVideo
> [ 665.513] (II) Loading extension XVideo-MotionCompensation
> [ 665.513] (II) Loading extension X-Resource
> [ 665.513] (II) LoadModule: "dbe"
> [ 665.513] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
> [ 665.513] (II) Module dbe: vendor="X.Org Foundation"
> [ 665.513] compiled for 1.9.4, module version = 1.0.0
> [ 665.513] Module class: X.Org Server Extension
> [ 665.513] ABI class: X.Org Server Extension, version 4.0
> [ 665.513] (II) Loading extension DOUBLE-BUFFER
> [ 665.513] (II) LoadModule: "glx"
> [ 665.513] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
> [ 665.518] (II) Module glx: vendor="NVIDIA Corporation"
> [ 665.518] compiled for 4.0.2, module version = 1.0.0
> [ 665.518] Module class: X.Org Server Extension
> [ 665.518] (II) NVIDIA GLX Module 270.18 Tue Jan 18 22:03:05 PST 2011
> [ 665.518] (II) Loading extension GLX
> [ 665.518] (II) LoadModule: "record"
> [ 665.518] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
> [ 665.519] (II) Module record: vendor="X.Org Foundation"
> [ 665.519] compiled for 1.9.4, module version = 1.13.0
> [ 665.519] Module class: X.Org Server Extension
> [ 665.519] ABI class: X.Org Server Extension, version 4.0
> [ 665.519] (II) Loading extension RECORD
> [ 665.519] (II) LoadModule: "dri"
> [ 665.519] (WW) Warning, couldn't open module dri
> [ 665.519] (II) UnloadModule: "dri"
> [ 665.519] (EE) Failed to load module "dri" (module does not exist, 0)
> [ 665.519] (II) LoadModule: "dri2"
> [ 665.519] (WW) Warning, couldn't open module dri2
> [ 665.519] (II) UnloadModule: "dri2"
> [ 665.519] (EE) Failed to load module "dri2" (module does not exist, 0)
> [ 665.519] (II) LoadModule: "nvidia"
> [ 665.519] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
> [ 665.519] (II) Module nvidia: vendor="NVIDIA Corporation"
> [ 665.519] compiled for 4.0.2, module version = 1.0.0
> [ 665.519] Module class: X.Org Video Driver
> [ 665.519] (II) NVIDIA dlloader X Driver 270.18 Tue Jan 18 21:47:56 PST
> 2011
> [ 665.519] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
> [ 665.519] (++) using VT number 8
>
> [ 665.535] (II) Loading sub module "fb"
> [ 665.535] (II) LoadModule: "fb"
> [ 665.535] (II) Loading /usr/lib64/xorg/modules/libfb.so
> [ 665.535] (II) Module fb: vendor="X.Org Foundation"
> [ 665.535] compiled for 1.9.4, module version = 1.0.0
> [ 665.535] ABI class: X.Org ANSI C Emulation, version 0.4
> [ 665.535] (II) Loading sub module "wfb"
> [ 665.535] (II) LoadModule: "wfb"
> [ 665.535] (II) Loading /usr/lib64/xorg/modules/libwfb.so
> [ 665.535] (II) Module wfb: vendor="X.Org Foundation"
> [ 665.535] compiled for 1.9.4, module version = 1.0.0
> [ 665.535] ABI class: X.Org ANSI C Emulation, version 0.4
> [ 665.535] (II) Loading sub module "ramdac"
> [ 665.535] (II) LoadModule: "ramdac"
> [ 665.535] (II) Module "ramdac" already built-in
> [ 665.535] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card
> support
> [ 665.535] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
> [ 665.535] (==) NVIDIA(0): RGB weight 888
> [ 665.535] (==) NVIDIA(0): Default visual is TrueColor
> [ 665.535] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
> [ 665.535] (**) NVIDIA(0): Option "TwinView"
> [ 665.535] (**) NVIDIA(0): Option "TwinViewOrientation" "RightOf"
> [ 665.535] (**) NVIDIA(0): Option "MetaModes" "1920x1080,1920x1080;
> 1920x1080"
> [ 665.535] (**) NVIDIA(0): Enabling RENDER acceleration
> [ 665.535] (II) NVIDIA(0): Support for GLX with the Damage and
> Composite X extensions is
> [ 665.535] (II) NVIDIA(0): enabled.
> [ 666.087] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-0))
> does not support NVIDIA
> [ 666.087] (II) NVIDIA(GPU-0): 3D Vision stereo.
> [ 666.120] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-2))
> does not support NVIDIA
> [ 666.120] (II) NVIDIA(GPU-0): 3D Vision stereo.
> [ 666.121] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 465 (GF100) at
> PCI:2:0:0 (GPU-0)
> [ 666.121] (--) NVIDIA(0): Memory: 1048576 kBytes
> [ 666.121] (--) NVIDIA(0): VideoBIOS: 70.00.35.00.60
> [ 666.121] (II) NVIDIA(0): Detected PCI Express Link width: 16X
> [ 666.121] (--) NVIDIA(0): Interlaced video modes are supported on this
> GPU
> [ 666.121] (--) NVIDIA(0): Connected display device(s) on GeForce
> GTX 465 at PCI:2:0:0
> [ 666.121] (--) NVIDIA(0): Samsung SyncMaster (DFP-0)
> [ 666.121] (--) NVIDIA(0): Samsung SyncMaster (DFP-2)
> [ 666.121] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): 330.0 MHz
> maximum pixel clock
> [ 666.121] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): Internal Dual Link
> TMDS
> [ 666.121] (--) NVIDIA(0): Samsung SyncMaster (DFP-2): 330.0 MHz
> maximum pixel clock
> [ 666.121] (--) NVIDIA(0): Samsung SyncMaster (DFP-2): Internal Dual Link
> TMDS
> [ 666.123] (**) NVIDIA(0): TwinView enabled
> [ 666.172] (WW) NVIDIA(0): The EDID for Samsung SyncMaster (DFP-0)
> contradicts itself:
> [ 666.172] (WW) NVIDIA(0): mode "1920x1080" is specified in the
> EDID; however, the
> [ 666.172] (WW) NVIDIA(0): EDID's valid VertRefresh range
> (56.000-61.000 Hz) would
> [ 666.172] (WW) NVIDIA(0): exclude this mode's VertRefresh (50.0
> Hz); ignoring
> [ 666.172] (WW) NVIDIA(0): VertRefresh check for mode "1920x1080".
> [ 666.172] (WW) NVIDIA(0): The EDID for Samsung SyncMaster (DFP-0)
> contradicts itself:
> [ 666.172] (WW) NVIDIA(0): mode "1280x720" is specified in the
> EDID; however, the
> [ 666.172] (WW) NVIDIA(0): EDID's valid VertRefresh range
> (56.000-61.000 Hz) would
> [ 666.172] (WW) NVIDIA(0): exclude this mode's VertRefresh (50.0
> Hz); ignoring
> [ 666.172] (WW) NVIDIA(0): VertRefresh check for mode "1280x720".
> [ 666.172] (WW) NVIDIA(0): The EDID for Samsung SyncMaster (DFP-0)
> contradicts itself:
> [ 666.172] (WW) NVIDIA(0): mode "720x576" is specified in the
> EDID; however, the
> [ 666.172] (WW) NVIDIA(0): EDID's valid VertRefresh range
> (56.000-61.000 Hz) would
> [ 666.172] (WW) NVIDIA(0): exclude this mode's VertRefresh (50.0
> Hz); ignoring
> [ 666.172] (WW) NVIDIA(0): VertRefresh check for mode "720x576".
> [ 666.172] (WW) NVIDIA(0): The EDID for Samsung SyncMaster (DFP-0)
> contradicts itself:
> [ 666.172] (WW) NVIDIA(0): mode "1920x1080" is specified in the
> EDID; however, the
> [ 666.172] (WW) NVIDIA(0): EDID's valid VertRefresh range
> (56.000-61.000 Hz) would
> [ 666.172] (WW) NVIDIA(0): exclude this mode's VertRefresh (50.0
> Hz); ignoring
> [ 666.172] (WW) NVIDIA(0): VertRefresh check for mode "1920x1080".
> [ 666.172] (WW) NVIDIA(0): The EDID for Samsung SyncMaster (DFP-0)
> contradicts itself:
> [ 666.172] (WW) NVIDIA(0): mode "1280x720" is specified in the
> EDID; however, the
> [ 666.172] (WW) NVIDIA(0): EDID's valid VertRefresh range
> (56.000-61.000 Hz) would
> [ 666.172] (WW) NVIDIA(0): exclude this mode's VertRefresh (50.0
> Hz); ignoring
> [ 666.172] (WW) NVIDIA(0): VertRefresh check for mode "1280x720".
> [ 666.173] (WW) NVIDIA(0): The EDID for Samsung SyncMaster (DFP-0)
> contradicts itself:
> [ 666.173] (WW) NVIDIA(0): mode "720x576" is specified in the
> EDID; however, the
> [ 666.173] (WW) NVIDIA(0): EDID's valid VertRefresh range
> (56.000-61.000 Hz) would
> [ 666.173] (WW) NVIDIA(0): exclude this mode's VertRefresh (50.0
> Hz); ignoring
> [ 666.173] (WW) NVIDIA(0): VertRefresh check for mode "720x576".
> [ 666.208] (II) NVIDIA(0): Assigned Display Devices: DFP-0, DFP-2
> [ 666.208] (II) NVIDIA(0): Validated modes:
> [ 666.208] (II) NVIDIA(0): "1920x1080,1920x1080"
> [ 666.208] (II) NVIDIA(0): "1920x1080"
> [ 666.208] (II) NVIDIA(0): Virtual screen size determined to be 3840 x
> 1080
> [ 666.232] (--) NVIDIA(0): DPI set to (95, 94); computed from
> "UseEdidDpi" X config
> [ 666.232] (--) NVIDIA(0): option
> [ 666.232] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
> [ 666.232] (--) Depth 24 pixmap format is 32 bpp
> [ 666.232] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect
> memory
> [ 666.232] (II) NVIDIA: access.
> [ 666.236] (II) NVIDIA(0): Initialized GPU GART.
> [ 666.247] (II) NVIDIA(0): Setting mode "1920x1080,1920x1080"
> [ 666.282] (II) Loading extension NV-GLX
> [ 666.387] (II) NVIDIA(0): Initialized OpenGL Acceleration
> [ 666.387] (==) NVIDIA(0): Disabling shared memory pixmaps
> [ 666.387] (II) NVIDIA(0): Initialized X Rendering Acceleration
> [ 666.387] (==) NVIDIA(0): Backing store disabled
> [ 666.387] (==) NVIDIA(0): Silken mouse enabled
> [ 666.387] (**) NVIDIA(0): DPMS enabled
> [ 666.388] (II) Loading extension NV-CONTROL
> [ 666.388] (II) Loading extension XINERAMA
> [ 666.388] (II) Loading sub module "dri2"
> [ 666.388] (II) LoadModule: "dri2"
> [ 666.388] (WW) Warning, couldn't open module dri2
> [ 666.388] (II) UnloadModule: "dri2"
> [ 666.388] (EE) NVIDIA: Failed to load module "dri2" (module does
> not exist, 0)
> [ 666.388] (II) NVIDIA(0): The X server will not be able to send the
> VDPAU driver name to
> [ 666.388] (II) NVIDIA(0): libvdpau.
> [ 666.388] (==) RandR enabled
> [ 666.388] (II) Initializing built-in extension Generic Event Extension
> [ 666.388] (II) Initializing built-in extension SHAPE
> [ 666.388] (II) Initializing built-in extension MIT-SHM
> [ 666.388] (II) Initializing built-in extension XInputExtension
> [ 666.388] (II) Initializing built-in extension XTEST
> [ 666.388] (II) Initializing built-in extension BIG-REQUESTS
> [ 666.388] (II) Initializing built-in extension SYNC
> [ 666.388] (II) Initializing built-in extension XKEYBOARD
> [ 666.388] (II) Initializing built-in extension XC-MISC
> [ 666.388] (II) Initializing built-in extension XINERAMA
> [ 666.388] (II) Initializing built-in extension XFIXES
> [ 666.388] (II) Initializing built-in extension RENDER
> [ 666.388] (II) Initializing built-in extension RANDR
> [ 666.388] (II) Initializing built-in extension COMPOSITE
> [ 666.388] (II) Initializing built-in extension DAMAGE
> [ 666.389] (II) Initializing extension GLX
> [ 666.424] (II) config/udev: Adding input device Power Button
> (/dev/input/event1)
> [ 666.424] (**) Power Button: Applying InputClass "evdev keyboard
> catchall"
> [ 666.424] (II) LoadModule: "evdev"
> [ 666.424] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
> [ 666.424] (II) Module evdev: vendor="X.Org Foundation"
> [ 666.424] compiled for 1.9.4, module version = 2.6.0
> [ 666.424] Module class: X.Org XInput Driver
> [ 666.424] ABI class: X.Org XInput driver, version 11.0
> [ 666.424] (**) Power Button: always reports core events
> [ 666.424] (**) Power Button: Device: "/dev/input/event1"
> [ 666.431] (--) Power Button: Found keys
> [ 666.431] (II) Power Button: Configuring as keyboard
> [ 666.431] (II) XINPUT: Adding extended input device "Power Button"
> (type: KEYBOARD)
> [ 666.431] (**) Option "xkb_rules" "evdev"
> [ 666.431] (**) Option "xkb_model" "evdev"
> [ 666.431] (**) Option "xkb_layout" "us"
> [ 666.444] (II) config/udev: Adding input device Power Button
> (/dev/input/event0)
> [ 666.444] (**) Power Button: Applying InputClass "evdev keyboard
> catchall"
> [ 666.444] (**) Power Button: always reports core events
> [ 666.444] (**) Power Button: Device: "/dev/input/event0"
> [ 666.451] (--) Power Button: Found keys
> [ 666.451] (II) Power Button: Configuring as keyboard
> [ 666.451] (II) XINPUT: Adding extended input device "Power Button"
> (type: KEYBOARD)
> [ 666.451] (**) Option "xkb_rules" "evdev"
> [ 666.451] (**) Option "xkb_model" "evdev"
> [ 666.451] (**) Option "xkb_layout" "us"
> [ 666.452] (II) config/udev: Adding input device Microsoft Microsoft
> 5-Button Mouse with IntelliEye(TM) (/dev/input/event3)
> [ 666.452] (**) Microsoft Microsoft 5-Button Mouse with
> IntelliEye(TM): Applying InputClass "evdev pointer catchall"
> [ 666.452] (**) Microsoft Microsoft 5-Button Mouse with
> IntelliEye(TM): always reports core events
> [ 666.452] (**) Microsoft Microsoft 5-Button Mouse with
> IntelliEye(TM): Device: "/dev/input/event3"
> [ 666.459] (--) Microsoft Microsoft 5-Button Mouse with
> IntelliEye(TM): Found 9 mouse buttons
> [ 666.459] (--) Microsoft Microsoft 5-Button Mouse with
> IntelliEye(TM): Found scroll wheel(s)
> [ 666.459] (--) Microsoft Microsoft 5-Button Mouse with
> IntelliEye(TM): Found relative axes
> [ 666.459] (--) Microsoft Microsoft 5-Button Mouse with
> IntelliEye(TM): Found x and y relative axes
> [ 666.459] (II) Microsoft Microsoft 5-Button Mouse with
> IntelliEye(TM): Configuring as mouse
> [ 666.459] (II) Microsoft Microsoft 5-Button Mouse with
> IntelliEye(TM): Adding scrollwheel support
> [ 666.459] (**) Microsoft Microsoft 5-Button Mouse with
> IntelliEye(TM): YAxisMapping: buttons 4 and 5
> [ 666.459] (**) Microsoft Microsoft 5-Button Mouse with
> IntelliEye(TM): EmulateWheelButton: 4, EmulateWheelInertia: 10,
> EmulateWheelTimeout: 200
> [ 666.459] (II) XINPUT: Adding extended input device "Microsoft
> Microsoft 5-Button Mouse with IntelliEye(TM)" (type: MOUSE)
> [ 666.459] (**) Microsoft Microsoft 5-Button Mouse with
> IntelliEye(TM): (accel) keeping acceleration scheme 1
> [ 666.459] (**) Microsoft Microsoft 5-Button Mouse with
> IntelliEye(TM): (accel) acceleration profile 0
> [ 666.459] (**) Microsoft Microsoft 5-Button Mouse with
> IntelliEye(TM): (accel) acceleration factor: 2.000
> [ 666.459] (**) Microsoft Microsoft 5-Button Mouse with
> IntelliEye(TM): (accel) acceleration threshold: 4
> [ 666.459] (II) Microsoft Microsoft 5-Button Mouse with
> IntelliEye(TM): initialized for relative axes.
> [ 666.459] (II) config/udev: Adding input device Microsoft Microsoft
> 5-Button Mouse with IntelliEye(TM) (/dev/input/mouse0)
> [ 666.459] (II) No input driver/identifier specified (ignoring)
> [ 666.465] (II) config/udev: Adding input device AT Translated Set 2
> keyboard (/dev/input/event2)
> [ 666.465] (**) AT Translated Set 2 keyboard: Applying InputClass
> "evdev keyboard catchall"
> [ 666.465] (**) AT Translated Set 2 keyboard: always reports core events
> [ 666.465] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event2"
> [ 666.471] (--) AT Translated Set 2 keyboard: Found keys
> [ 666.471] (II) AT Translated Set 2 keyboard: Configuring as keyboard
> [ 666.471] (II) XINPUT: Adding extended input device "AT Translated
> Set 2 keyboard" (type: KEYBOARD)
> [ 666.471] (**) Option "xkb_rules" "evdev"
> [ 666.471] (**) Option "xkb_model" "evdev"
> [ 666.471] (**) Option "xkb_layout" "us"
> [ 666.471] (II) config/udev: Adding input device PS/2 Generic Mouse
> (/dev/input/event4)
> [ 666.471] (**) PS/2 Generic Mouse: Applying InputClass "evdev
> pointer catchall"
> [ 666.471] (**) PS/2 Generic Mouse: always reports core events
> [ 666.471] (**) PS/2 Generic Mouse: Device: "/dev/input/event4"
> [ 666.479] (--) PS/2 Generic Mouse: Found 3 mouse buttons
> [ 666.479] (--) PS/2 Generic Mouse: Found relative axes
> [ 666.479] (--) PS/2 Generic Mouse: Found x and y relative axes
> [ 666.479] (II) PS/2 Generic Mouse: Configuring as mouse
> [ 666.479] (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
> [ 666.479] (**) PS/2 Generic Mouse: EmulateWheelButton: 4,
> EmulateWheelInertia: 10, EmulateWheelTimeout: 200
> [ 666.479] (II) XINPUT: Adding extended input device "PS/2 Generic
> Mouse" (type: MOUSE)
> [ 666.479] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
> [ 666.479] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
> [ 666.479] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
> [ 666.479] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
> [ 666.479] (II) PS/2 Generic Mouse: initialized for relative axes.
> [ 666.479] (II) config/udev: Adding input device PS/2 Generic Mouse
> (/dev/input/mouse1)
> [ 666.479] (II) No input driver/identifier specified (ignoring)
> mark@c2stable ~ $
>
>
--
Atenciosamente,
Gregory Fontenele
[-- Attachment #2: Type: text/html, Size: 24148 bytes --]
next prev parent reply other threads:[~2011-04-06 15:14 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-05 22:25 [gentoo-user] non-Twinview dual screen setup? Mark Knecht
2011-04-05 23:30 ` Jacob Todd
2011-04-06 6:08 ` Yohan Pereira
2011-04-06 0:00 ` Neil Bothwick
2011-04-06 11:27 ` Peter Humphrey
2011-04-06 15:06 ` Mark Knecht
2011-04-06 15:12 ` Gregory Fontenele [this message]
2011-04-06 15:31 ` Dale
[not found] <gEmV3-dv-1@gated-at.bofh.it>
[not found] ` <gEo0O-20g-1@gated-at.bofh.it>
2011-04-06 0:31 ` Indi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='BANLkTi=3st5zAUChxFahmcpuTpRm_pKHoA@mail.gmail.com' \
--to=gregoryfontenele@gmail.com \
--cc=gentoo-user@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox