From: liu shukui <liushukuicn1771@gmail.com>
To: gentoo-user@lists.gentoo.org
Subject: [gentoo-user] networkmanager cannot connect to wireless network.
Date: Thu, 19 Aug 2010 14:30:03 +0800 [thread overview]
Message-ID: <AANLkTinE9Odu_C4WZcz_2ZhPUJ9fHJLOmJx4rz=AyEiT@mail.gmail.com> (raw)
Hi, all
after I upgraded net-misc/networkmanager-0.8.1-r3, I cannot connect to
my wireless ap. here is some debug infomation.
How can I fix it?
tux ~ # /usr/sbin/NetworkManager --no-daemon
NetworkManager[6653]: <info> NetworkManager (version 0.8.1) is starting...
NetworkManager[6653]: <info> Read config file
/etc/NetworkManager/nm-system-settings.conf
NetworkManager[6653]: <info> modem-manager is now available
NetworkManager[6653]: SCPlugin-Ifnet: Initializing!
NetworkManager[6653]: SCPlugin-Ifnet: management mode: managed
NetworkManager[6653]: SCPlugin-Ifnet: Monitoring /etc/conf.d/hostname
NetworkManager[6653]: SCPlugin-Ifnet: Monitoring /etc/conf.d/net
NetworkManager[6653]: SCPlugin-Ifnet: Can't open
/etc/wpa_supplicant/wpa_supplicant.conf for wireless security
NetworkManager[6653]: SCPlugin-Ifnet: Loading connections
NetworkManager[6653]: SCPlugin-Ifnet: guessed connection type
(wlan0) = 802-11-wireless
NetworkManager[6653]: SCPlugin-Ifnet:
update_connection_setting_from_config_block: name:wlan0, id:System
(wlan0), uuid: bc78c09a-4c5c-6789-0a97-7566d33b64fe
NetworkManager[6653]: SCPlugin-Ifnet: wireless_setting added for wlan0
NetworkManager[6653]: SCPlugin-Ifnet: Using DHCP for wlan0
NetworkManager[6653]: SCPlugin-Ifnet: Connection verified wlan0:1
NetworkManager[6653]: SCPlugin-Ifnet: Initialzation complete!
NetworkManager[6653]: <info> Loaded plugin ifnet: (C) 1999-2010 Gentoo
Foundation, Inc. To report bugs please use bugs.gentoo.org with
[networkmanager] or [dagger] prefix.
NetworkManager[6653]: <info> Loaded plugin keyfile: (c) 2007 - 2008
Red Hat, Inc. To report bugs please use the NetworkManager mailing
list.
NetworkManager[6653]: SCPlugin-Ifnet: getting unmanaged specs...
NetworkManager[6653]: SCPlugin-Ifnet: (135164856) ... get_connections.
NetworkManager[6653]: SCPlugin-Ifnet: (135164856) connections count: 1
NetworkManager[6653]: Ignoring insecure configuration file
'/etc/NetworkManager/system-connections/.keep_net-misc_networkmanager-0'
NetworkManager[6653]: SCPlugin-Ifnet: getting unmanaged specs...
NetworkManager[6653]: <info> WiFi enabled by radio killswitch; enabled
by state file
NetworkManager[6653]: <info> WWAN enabled by radio killswitch; enabled
by state file
NetworkManager[6653]: <info> WiMAX enabled by radio killswitch;
enabled by state file
NetworkManager[6653]: <info> Networking is enabled by state file
NetworkManager[6653]: <info> (eth0): carrier is OFF
NetworkManager[6653]: <info> (eth0): new Ethernet device (driver:
'e1000e' ifindex: 2)
NetworkManager[6653]: <info> (eth0): exported as
/org/freedesktop/NetworkManager/Devices/0
NetworkManager[6653]: <info> (eth0): now managed
NetworkManager[6653]: <info> (eth0): device state change: 1 -> 2 (reason 2)
NetworkManager[6653]: <info> (eth0): bringing up device.
NetworkManager[6653]: <info> (eth0): preparing device.
NetworkManager[6653]: <info> (eth0): deactivating device (reason: 2).
NetworkManager[6653]: <info> Added default wired connection 'Auto
eth0' for /sys/devices/pci0000:00/0000:00:19.0/net/eth0
NetworkManager[6653]: <info> (wlan0): driver supports SSID scans
(scan_capa 0x01).
NetworkManager[6653]: <info> (wlan0): new 802.11 WiFi device (driver:
'iwlagn' ifindex: 3)
NetworkManager[6653]: <info> (wlan0): exported as
/org/freedesktop/NetworkManager/Devices/1
NetworkManager[6653]: <info> (wlan0): now managed
NetworkManager[6653]: <info> (wlan0): device state change: 1 -> 2 (reason 2)
NetworkManager[6653]: <info> (wlan0): bringing up device.
NetworkManager[6653]: <info> (wlan0): preparing device.
NetworkManager[6653]: <info> (wlan0): deactivating device (reason: 2).
NetworkManager[6653]: <warn> /sys/devices/virtual/net/vboxnet0:
couldn't determine device driver; ignoring...
* status: started
NetworkManager[6653]: <info> (wlan0): supplicant interface state:
starting -> ready
NetworkManager[6653]: <info> (wlan0): device state change: 2 -> 3 (reason 42)
NetworkManager[6653]: <info> Activation (wlan0) starting connection
'Auto NETGEAR007'
NetworkManager[6653]: <info> (wlan0): device state change: 3 -> 4 (reason 0)
NetworkManager[6653]: <info> Activation (wlan0) Stage 1 of 5 (Device
Prepare) scheduled...
NetworkManager[6653]: <info> Activation (wlan0) Stage 1 of 5 (Device
Prepare) started...
NetworkManager[6653]: <info> Activation (wlan0) Stage 2 of 5 (Device
Configure) scheduled...
NetworkManager[6653]: <info> Activation (wlan0) Stage 1 of 5 (Device
Prepare) complete.
NetworkManager[6653]: <info> Activation (wlan0) Stage 2 of 5 (Device
Configure) starting...
NetworkManager[6653]: <info> (wlan0): device state change: 4 -> 5 (reason 0)
NetworkManager[6653]: <info> Activation (wlan0/wireless): connection
'Auto NETGEAR007' requires no security. No secrets needed.
NetworkManager[6653]: <info> Config: added 'ssid' value 'NETGEAR007'
NetworkManager[6653]: <info> Config: added 'scan_ssid' value '1'
NetworkManager[6653]: <info> Config: added 'key_mgmt' value 'NONE'
NetworkManager[6653]: <info> Activation (wlan0) Stage 2 of 5 (Device
Configure) complete.
NetworkManager[6653]: <info> Config: set interface ap_scan to 1
NetworkManager[6653]: <info> (wlan0): supplicant connection state:
scanning -> disconnected
NetworkManager[6653]: <info> (wlan0): supplicant connection state:
disconnected -> scanning
NetworkManager[6653]: <info> (eth0): carrier now ON (device state 2)
NetworkManager[6653]: <info> (eth0): device state change: 2 -> 3 (reason 40)
NetworkManager[6653]: <info> Activation (eth0) starting connection 'Auto eth0'
NetworkManager[6653]: <info> (eth0): device state change: 3 -> 4 (reason 0)
NetworkManager[6653]: <info> Activation (eth0) Stage 1 of 5 (Device
Prepare) scheduled...
NetworkManager[6653]: <info> Activation (eth0) Stage 1 of 5 (Device
Prepare) started...
NetworkManager[6653]: <info> Activation (eth0) Stage 2 of 5 (Device
Configure) scheduled...
NetworkManager[6653]: <info> Activation (eth0) Stage 1 of 5 (Device
Prepare) complete.
NetworkManager[6653]: <info> Activation (eth0) Stage 2 of 5 (Device
Configure) starting...
NetworkManager[6653]: <info> (eth0): device state change: 4 -> 5 (reason 0)
NetworkManager[6653]: <info> Activation (eth0) Stage 2 of 5 (Device
Configure) successful.
NetworkManager[6653]: <info> Activation (eth0) Stage 3 of 5 (IP
Configure Start) scheduled.
NetworkManager[6653]: <info> Activation (eth0) Stage 2 of 5 (Device
Configure) complete.
NetworkManager[6653]: <info> Activation (eth0) Stage 3 of 5 (IP
Configure Start) started...
NetworkManager[6653]: <info> (eth0): device state change: 5 -> 7 (reason 0)
NetworkManager[6653]: <info> Activation (eth0) Beginning DHCPv4
transaction (timeout in 45 seconds)
NetworkManager[6653]: <info> dhclient started with pid 6684
NetworkManager[6653]: <info> Activation (eth0) Stage 3 of 5 (IP
Configure Start) complete.
Internet Systems Consortium DHCP Client V3.1.2p1-Gentoo
Copyright 2004-2009 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
Usage: dhclient [-1dqrx] [-nw] [-p <port>] [-s server]
[-cf config-file] [-lf lease-file][-pf pid-file] [-e VAR=val]
[-sf script-file] [interface]
If you did not get this software from ftp.isc.org, please
get the latest from ftp.isc.org and install that before
requesting help.
If you did get this software from ftp.isc.org and have not
yet read the README, please read it before requesting help.
If you intend to request help from the dhcp-server@isc.org
mailing list, please read the section on the README about
submitting bug reports and requests for help.
Please do not under any circumstances send requests for
help directly to the authors of this software - please
send them to the appropriate mailing list as described in
the README file.
exiting.
reply other threads:[~2010-08-19 6:30 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='AANLkTinE9Odu_C4WZcz_2ZhPUJ9fHJLOmJx4rz=AyEiT@mail.gmail.com' \
--to=liushukuicn1771@gmail.com \
--cc=gentoo-user@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox