* [gentoo-user] Xorg.conf changes and dual screen setup
@ 2007-09-09 22:33 99% Daniel Pielmeier
0 siblings, 0 replies; 1+ results
From: Daniel Pielmeier @ 2007-09-09 22:33 UTC (permalink / raw
To: gentoo-user
Hi,
the update to xorg-server-1.3 broke my dual-screen setup. It creates a
virtual screen size with the same size of the primary monitor for the
second monitor which is my TV. So i can only reach a zone with 800x600
on the second device, even scrolling within the virtual screen is
impossible. I want 1280x1024 for the primary and 800x600 for the
secondary Monitor which displays the complete desktop on any screen.
The Xorg.0.log file does not show any errors which may give some hints.
Hi have searched and found that there were changes in the xorg.conf
file. But i have found no documentation which describes the changes
which have to be made to the configuration file. I have also checked man
xorg.conf but haven't found anything mich may cause this problem.
Any help would be appreciated!
Regards,
Daniel
Below you find my current xorg.conf
Section "ServerLayout"
Identifier "Gemeinsames Layout"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse" "CorePointer"
InputDevice "Keyboard" "CoreKeyboard"
EndSection
Section "ServerFlags"
Option "RandR" "true"
EndSection
Section "Files"
FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/misc/:unscaled"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/ttf-bitstream-vera/"
EndSection
Section "Module"
Load "extmod"
Load "dbe"
Load "record"
Load "xtrap"
Load "glx"
Load "type1"
Load "freetype"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
EndSection
Section "InputDevice"
Identifier "Keyboard"
Driver "kbd"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
EndSection
Section "InputDevice"
Identifier "Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "ACER"
ModelName "AL1914sm"
HorizSync 31.0 - 83.0
VertRefresh 56.0 - 75.0
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Magnum"
ModelName "TV 5520 VT Stereo"
HorizSync 30.0 - 50.0
VertRefresh 60.0
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "Giga-byte"
BoardName "nVidia Corporation [GeForce 7300 LE]"
BusID "PCI:05:00:0"
Screen 0
EndSection
Section "Device"
Identifier "Card1"
Driver "nvidia"
VendorName "Giga-byte"
BoardName "nVidia Corporation [GeForce 7300 LE]"
BusID "PCI:05:00:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
Option "NoLogo" "true"
Option "NvAGP" "3"
Option "AllowGLXWithComposite" "True"
Option "RenderAccel" "True"
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
DefaultDepth 24
Option "NoLogo" "true"
Option "NvAGP" "3"
Option "TVStandard" "PAL-B"
Option "AllowGLXWithComposite" "True"
Option "RenderAccel" "True"
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Viewport 0 0
Depth 24
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
Modes "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [relevance 99%]
Results 1-1 of 1 | reverse | options above
-- pct% links below jump to the message on this page, permalinks otherwise --
2007-09-09 22:33 99% [gentoo-user] Xorg.conf changes and dual screen setup Daniel Pielmeier
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox