* Re: [gentoo-user] Re: repair of a seg-faulting bin-utils
@ 2022-10-26 18:45 99% ` Matt Connell
0 siblings, 0 replies; 1+ results
From: Matt Connell @ 2022-10-26 18:45 UTC (permalink / raw
To: gentoo-user
On Wed, 2022-10-26 at 14:37 -0400, Rich Freeman wrote:
> Another possible issue is bad -march settings. That usually is an
> issue if you change your CPU and boot off of an existing hard drive.
> If you're going to upgrade your CPU you should rebuild all of @system
> (at least) with -march set to something very minimal. Don't assume
> that a newer CPU does everything an existing one does - they sometimes
> do drop instructions. You can set -mcpu to whatever you want, as a
> bad -mcpu will only cause minor performance issues.
Further reading on this:
https://wiki.gentoo.org/wiki/Safe_CFLAGS
I've always used this as a reference for helping ensure make.conf is
not only going to be well optimized, but produce reliable binaries.
^ permalink raw reply [relevance 99%]
Results 1-1 of 1 | reverse | options above
-- pct% links below jump to the message on this page, permalinks otherwise --
2022-10-26 16:14 [gentoo-user] repair of a seg-faulting bin-utils Corbin
2022-10-26 16:24 ` [gentoo-user] " Grant Edwards
2022-10-26 18:37 ` Rich Freeman
2022-10-26 18:45 99% ` Matt Connell
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox