* [gentoo-user] Re: OT - Accessing the Digital Cable DVR...
@ 2007-09-07 16:05 99% ` James
0 siblings, 0 replies; 1+ results
From: James @ 2007-09-07 16:05 UTC (permalink / raw
To: gentoo-user
Michael Sullivan <michael <at> espersunited.com> writes:
> I've hooked my digital cable DVR to my PC via an A-to-A USB cord, and
> I'm wondering if I can copy programs recorded on the DVR to the PC. In
> dmesg, I saw the following:
This may or maynot work.
Install ivman and then plug in the usb cable. My video camera's HDD
is auto discovered this way, and then I just copy over the files,
from /media/<whatever> to where I want them.
I have fat, vfat and ntfs supported by compiling into the kernel.
It helps and most things I plug into a usb port that are intended
for doz, just pop up, via ivman...
If that does not work, there is a book out about 'Hacking the Cable
Modem'. It may give you some ideas.... The author is DerEngel. Never
looked at the book, so I cannot tell you if it will be useful.
good hunting...
James
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [relevance 99%]
Results 1-1 of 1 | reverse | options above
-- pct% links below jump to the message on this page, permalinks otherwise --
2007-09-06 20:33 [gentoo-user] OT - Accessing the Digital Cable DVR Michael Sullivan
2007-09-07 16:05 99% ` [gentoo-user] " James
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox