* Re: [gentoo-user] Re: why a manual dhcpcd eth0 is needed?
@ 2011-10-22 21:51 99% ` Valmor de Almeida
0 siblings, 0 replies; 1+ results
From: Valmor de Almeida @ 2011-10-22 21:51 UTC (permalink / raw
To: gentoo-user
On 10/22/2011 02:18 PM, Alan McKinnon wrote:
> On Sat, 22 Oct 2011 10:13:53 -0400
> Valmor de Almeida <val.gentoo@gmail.com> wrote:
>
>> On 10/22/2011 02:18 AM, Nikos Chantziaras wrote:
>>> On 10/22/2011 08:08 AM, Valmor de Almeida wrote:
>>>>
>>>> Hello,
>>>>
>>>> On a recent gentoo install using wicd for network configuration, no
>>>> connection is established during boot. After logging in, I need to
>>>> issue
>>>>
>>>> dhcpcd eth0
>>>>
>>>> to obtain an IP address and access the internet via ethernet. I
>>>> thought wicd would take care of that. I did not emerge dhcpcd, it
>>>> was emerged as a dependency of wicd.
>>>>
>>>> What am I missing? I have wicd starting during the boot runlevel.
>>>
>>> You probably don't have a correct /etc/conf.d/net file. Try:
>>>
>>> modules="dhcpcd"
>>> config_eth0="dhcp"
>>>
>>>
>> I have other gentoo laptops/machines and I typically leave this file
>> empty. They all work with wicd in wired and wireless mode.
>
> Correct.
>
> wicd does not use /etc/conf.d/net at all, it has it's own mechanisms.
>
> /etc/conf.d/net is used by the Gentoo network scripts, an entirely
> different thing from wicd
>
>
>
>
Any inputs on why I need to issue
dhcpcd eth0
for this particular install. The ethernet card is Broadcom NetXtreme
BCM5764M Gigabit Ethernet PCIe. I have the right driver built into the
kernel. All works but as I said, wicd does work from boot. After logging
in I need to get an IP address manually.
Don't know what I am missing.
Thanks,
--
Valmor
^ permalink raw reply [relevance 99%]
Results 1-1 of 1 | reverse | options above
-- pct% links below jump to the message on this page, permalinks otherwise --
2011-10-22 5:08 [gentoo-user] why a manual dhcpcd eth0 is needed? Valmor de Almeida
2011-10-22 6:18 ` [gentoo-user] " Nikos Chantziaras
2011-10-22 14:13 ` Valmor de Almeida
2011-10-22 18:18 ` Alan McKinnon
2011-10-22 21:51 99% ` Valmor de Almeida
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox