* [gentoo-user] Re: xorg 1.9
@ 2011-01-19 4:58 99% ` Nikos Chantziaras
0 siblings, 0 replies; 1+ results
From: Nikos Chantziaras @ 2011-01-19 4:58 UTC (permalink / raw
To: gentoo-user
On 01/19/2011 06:46 AM, dan blum wrote:
> I upgraded my xorg from 1.76 to 1.9 yesterday, including downloading the
> most recent drivers. When the new system did not work, I checked the
> xorg log (attached) and I thought that the problem was the mode setting.
> So in the kernel, I "enabled the modesetting by default" and now the
> card does not send any signals to the screen at all.
>
> I can go back to the old kernel settings. But does anyone know what was
> the initial problem, and what needs to be done to correct this.
>
> Thanks for any advice.
You seem to be using kernel 2.6.32. That *might* be the problem. Try
2.6.36.
Other than that, the usual stuff applies: Delete your xorg.conf (so that
X.Org can automatically configure everything) and make sure you don't
have VESAFB enabled in the kernel.
^ permalink raw reply [relevance 99%]
Results 1-1 of 1 | reverse | options above
-- pct% links below jump to the message on this page, permalinks otherwise --
2011-01-19 4:46 [gentoo-user] xorg 1.9 dan blum
2011-01-19 4:58 99% ` [gentoo-user] " Nikos Chantziaras
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox