* Re: [gentoo-user] Howto setup tunnel in gentoo scripts
@ 2006-05-30 20:58 99% ` Neil Bothwick
0 siblings, 0 replies; 1+ results
From: Neil Bothwick @ 2006-05-30 20:58 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 1091 bytes --]
On Tue, 30 May 2006 22:29:02 +0200, Norbert Kamenicky wrote:
> to establish gre tunnel, these commands have to be run:
> (e.g. from local.start)
>
> # ip tunnel add vpn0 mode gre remote 1.1.1.1 local 2.2.2.2 dev eth0
> # ip addr add 3.3.3.3 dev vpn0
> # ip link set vpn0 mtu 1420 up
>
> Does anybody know, how to put it into /etc/conf.d/net ?
> I didn't succeed yet, 'cause I found no clear doc.
I take it you want these run when the interface comes up? If so, put them
in the postup() function in /etc/conf.d/net. Something like
postup() {
if [ ${IFACE} == "eth0" ]; then
ip tunnel add vpn0 mode gre remote 1.1.1.1 local 2.2.2.2 dev eth0
ip addr add 3.3.3.3 dev vpn0
ip link set vpn0 mtu 1420 up
fi
}
You may need to put the shutdown commands in predown().
See /etc/conf.d/net.example for more info. I use ~arch, so I don't know
for sure how much of this works in the current stable baselayout, but
I've been using these functions for over a year, so I guess it's in
stable by now.
--
Neil Bothwick
No maintenance: Impossible to fix.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [relevance 99%]
Results 1-1 of 1 | reverse | options above
-- pct% links below jump to the message on this page, permalinks otherwise --
2006-05-30 20:29 [gentoo-user] Howto setup tunnel in gentoo scripts Norbert Kamenicky
2006-05-30 20:58 99% ` Neil Bothwick
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox