* Re: [gentoo-user] Makeing /dev/rtc1 accessible as soon as possible - how?
@ 2013-08-25 4:18 99% ` Mark David Dumlao
0 siblings, 0 replies; 1+ results
From: Mark David Dumlao @ 2013-08-25 4:18 UTC (permalink / raw
To: gentoo-user
Which runlevel did you put your script on?
You probably want it on sysinit, rather than default.
Also, you can put rc_before= and rc_after= in the corresponding
/etc/conf.d/ file and make sure it runs before your syslog but after
your sysfs.
On Sun, Aug 25, 2013 at 12:04 PM, <meino.cramer@gmx.de> wrote:
> Hi,
>
> There are two RTCs in my system:
> /dev/rtc0 and /dev/rtc1
>
> rtc0 is not powered by a battery and forgets time/date
> with system shutdown and rtc1 is a I2C-rtc (DS3231) which
> is powered by a battery. It is extremly accurate in comparison
> with rtc0.
>
> rtc0 is accessible with system boot - rtc1 is not (current state).
>
> To make rtc1 completly know to the system, I have to do a
> echo ds3231 0x68 >! /sys/bus/i2c/devices/i2c-1/new_device
> hwclock -f /dev/rtc1 -s
> in beforehand.
>
> I wrote a script for /etc/init.d, which does exactly this, and
> the system login screen shows the correct tome/date information
> even without ntp-client (the system should become independantly
> from lan/internet). The script was added to the boot service
> and executed after dev and modules.
>
> The kernel is configured to use /dev/rtc1 and the driver for the
> ds1307, which also handles the ds3231, is included into the kernel
> (no module).
>
> But it seems, that setting the system time this way is too late,
> since there are still (for example) log files under /var/log
> with a timestamp of the 1.1.1970.
>
> Are there any other way to make rtc1 known and accessible earlier
> to the system as the hack via a script in /etc/init.d ?
>
> Thank you very much in advance for any help!
> Best regards,
> mcc
>
>
>
>
--
This email is: [ ] actionable [ ] fyi [ ] social
Response needed: [ ] yes [ ] up to you [ ] no
Time-sensitive: [ ] immediate [ ] soon [ ] none
^ permalink raw reply [relevance 99%]
Results 1-1 of 1 | reverse | options above
-- pct% links below jump to the message on this page, permalinks otherwise --
2013-08-25 4:04 [gentoo-user] Makeing /dev/rtc1 accessible as soon as possible - how? meino.cramer
2013-08-25 4:18 99% ` Mark David Dumlao
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox