* Re: [gentoo-user] Very bad system response
@ 2007-02-07 11:35 99% ` Benno Schulenberg
0 siblings, 0 replies; 1+ results
From: Benno Schulenberg @ 2007-02-07 11:35 UTC (permalink / raw
To: gentoo-user
Hemmann, Volker Armin wrote:
> hdparm /dev/hda
>
> /dev/hda:
> multcount = 16 (on)
> IO_support = 1 (32-bit)
> unmaskirq = 1 (on)
> using_dma = 1 (on)
> keepsettings = 0 (off)
> readonly = 0 (off)
> readahead = 256 (on)
> geometry = 16383/255/63, sectors = 234493056, start = 0
Maybe set readahead to a smaller value? Something like 8 or 16?
At least that's what http://linuxgazette.net/issue79/punk.html
advises. If you have specific reasons for the higher value, then
please elaborate.
Benno
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [relevance 99%]
Results 1-1 of 1 | reverse | options above
-- pct% links below jump to the message on this page, permalinks otherwise --
2007-02-06 20:29 [gentoo-user] Very bad system response Michael Schreckenbauer
2007-02-07 3:49 ` Norberto Bensa
2007-02-07 4:53 ` Hemmann, Volker Armin
2007-02-07 11:35 99% ` Benno Schulenberg
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox