* Re: [gentoo-user] USB-BT211 causing udev to fail, related to usb3, how to disable?
@ 2011-08-13 13:36 99% ` jonas.narstrom
0 siblings, 0 replies; 1+ results
From: jonas.narstrom @ 2011-08-13 13:36 UTC (permalink / raw
To: gentoo-user
lördagen den 13 augusti 2011 16.35.01 skrev victor romanchuk:
>
> > I have an ASUS USB-BT211 bluetooth dongle, I have never been able to make
it
> > work and it causes udev to fail at startup and sending the following msg
to
> > the syslog:
> >
> > 2011-08-13T09:45:30+02:00 poff udevd[5235]: timeout 'usb_id --export
> > /devices/pci0000:00/0000:00:12.0/usb3'
> >
> > This seems to be related to usb3, however, neither the mobo (ASUS M4A79XTD
> > EVO) nor the the installed kernel has usb3 support; if related to usb3 is
> > expected.
> >
>
> this dongle actually has atheros chip inside, so you have to add appropriate
> support in kernel (CONFIG_BT_ATH3K) and install sys-kernel/linux-firmware
>
> the issue is not related to usb3 (xhci). usb3 in that context means just
port
> you're attaching the device to
>
> hth||
>
Thank you, I have fixed the kernel configuration and udev boots normally.
^ permalink raw reply [relevance 99%]
Results 1-1 of 1 | reverse | options above
-- pct% links below jump to the message on this page, permalinks otherwise --
2011-08-13 10:23 [gentoo-user] USB-BT211 causing udev to fail, related to usb3, how to disable? jonas.narstrom
2011-08-13 12:35 ` victor romanchuk
2011-08-13 13:36 99% ` jonas.narstrom
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox