* [gentoo-user] Raid1 & fstab
@ 2011-04-11 13:59 99% James
0 siblings, 0 replies; 1+ results
From: James @ 2011-04-11 13:59 UTC (permalink / raw
To: gentoo-user
Hello,
background
I mostly followed these guides to build a raid1
workstation using (2) 2T seagate drives:
http://www.gentoo.org/doc/en/gentoo-x86+raid+lvm2-quickinstall.xml
http://en.gentoo-wiki.com/wiki/Software_RAID_Install
http://en.gentoo-wiki.com/wiki/RAID/Software
Since I'm just using a very simple partion scheme
raid 1(boot, swap, /) I decided to forgo LVM, for now.
Maybe on the next install, I'll get Dale to coach
me on LVM2 ....?
;-)
Both drives are identical (edited to fit gmane):
Disk identifier: 0xab83344a
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 526335 262144 fd Lraid auto
/dev/sda2 526336 10573823 5023744 fd Lraid auto
/dev/sda3 573824 3907029167 1948227672 fd Lraid auto
OK so my question is does this fstab look ok, workable? improvements?
none /proc proc defaults 0 0
/dev/cdrom /mnt/cdrom auto noauto,rw,user 0 0
shm /dev/shm tmpfs nodev,nosuid,noexec 0 0
/dev/sdb1 /usr/local/video2 ext4 defaults 0 1
/dev/md1 /boot ext4 noauto,noatime 1 2
/dev/md3 / ext4 noatime 0 1
/dev/md2 swap swap defaults 0 0
I did not setup initramfs, as those steps where not
part of the guides, but googling I did see many places where
initramfs was suggested. thoughts and comments?
http://en.gentoo-wiki.com/wiki/Initramfs
It's my first gentoo software raid.....
My email is down; so only post to this list!
hopeful this AM,
James
^ permalink raw reply [relevance 99%]
Results 1-1 of 1 | reverse | options above
-- pct% links below jump to the message on this page, permalinks otherwise --
2011-04-11 13:59 99% [gentoo-user] Raid1 & fstab James
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox