* [gentoo-user] Switching to Bellsouth dial-up, trying to anyway. :-(
@ 2007-05-29 23:25 99% Dale
0 siblings, 0 replies; 1+ results
From: Dale @ 2007-05-29 23:25 UTC (permalink / raw
To: gentoo-user
Hi,
I'm trying to switch ISPs over to Bell South. I can not get it to
connect up though. I have tried wvdial and Kppp with no luck. This is
what I am getting.
> root@smoker / # wvdial
> WvDial<*1>: WvDial: Internet dialer version 1.56
> WvDial<*1>: Initializing modem.
> WvDial<*1>: Sending: ATZ
> WvDial Modem<*1>: ATZ
> WvDial Modem<*1>: OK
> WvDial<*1>: Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> WvDial Modem<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> WvDial Modem<*1>: OK
> WvDial<*1>: Modem initialized.
> WvDial<*1>: Sending: ATDT*70,4952462
> WvDial<*1>: Waiting for carrier.
> WvDial Modem<*1>: ATDT*70,4952462
> WvDial Modem<*1>: CONNECT 26400/V34/NONE
> WvDial<*1>: Carrier detected. Waiting for prompt.
> WvDial<Notice>: Don't know what to do! Starting pppd and hoping for
> the best.
> WvDial<Notice>: Starting pppd at Tue May 29 17:57:20 2007
> WvDial<Notice>: Pid of pppd: 15088
> WvDial<*1>: Using interface ppp0
> WvDial<*1>: pppd: ([06][08][18][06][08]
> WvDial<*1>: pppd: ([06][08][18][06][08]
> WvDial<*1>: pppd: ([06][08][18][06][08]
> WvDial<*1>: pppd: ([06][08][18][06][08]
> WvDial<*1>: pppd: ([06][08][18][06][08]
> WvDial<*1>: Disconnecting at Tue May 29 17:57:50 2007
> WvDial<*1>: The PPP daemon has died: A modem hung up the phone (exit
> code = 16)
> WvDial<*1>: man pppd explains pppd error codes in more detail.
> WvDial<Notice>: Try again and look into /var/log/messages and the
> wvdial and pppd man pages for more information.
> WvDial<Notice>: Auto Reconnect will be attempted in 5 seconds
>From /var/log/messages
> May 29 17:53:48 smoker pppd[11949]: pppd 2.4.4 started by root, uid 0
> May 29 17:53:48 smoker pppd[11949]: Using interface ppp0
> May 29 17:53:48 smoker pppd[11949]: Connect: ppp0 <--> /dev/ttyS1
> May 29 17:54:18 smoker pppd[11949]: LCP: timeout sending Config-Requests
> May 29 17:54:18 smoker pppd[11949]: Connection terminated.
> May 29 17:54:18 smoker pppd[11949]: Modem hangup
> May 29 17:54:18 smoker pppd[11949]: Exit.
> May 29 17:55:35 smoker pppd[27516]: pppd 2.4.4 started by root, uid 0
> May 29 17:55:35 smoker pppd[27516]: Using interface ppp0
> May 29 17:55:35 smoker pppd[27516]: Connect: ppp0 <--> /dev/ttyS1
> May 29 17:56:05 smoker pppd[27516]: LCP: timeout sending Config-Requests
> May 29 17:56:05 smoker pppd[27516]: Connection terminated.
> May 29 17:56:05 smoker pppd[27516]: Modem hangup
> May 29 17:56:05 smoker pppd[27516]: Exit.
When I tried to use Kppp, I got this error:
> May 29 17:59:29 smoker pppd[2131]: pppd 2.4.4 started by dale, uid 1000
> May 29 17:59:29 smoker pppd[2131]: using channel 403
> May 29 17:59:29 smoker pppd[2131]: Using interface ppp0
> May 29 17:59:29 smoker pppd[2131]: Connect: ppp0 <--> /dev/ttyS1
> May 29 17:59:29 smoker pppd[2131]: sent [LCP ConfReq id=0x1 <asyncmap
> 0x0> <magic 0xe7380598> <pcomp> <accomp>]
> May 29 17:59:32 smoker pppd[2131]: sent [LCP ConfReq id=0x1 <asyncmap
> 0x0> <magic 0xe7380598> <pcomp> <accomp>]
> May 29 17:59:35 smoker pppd[2131]: sent [LCP ConfReq id=0x1 <asyncmap
> 0x0> <magic 0xe7380598> <pcomp> <accomp>]
> May 29 17:59:38 smoker pppd[2131]: sent [LCP ConfReq id=0x1 <asyncmap
> 0x0> <magic 0xe7380598> <pcomp> <accomp>]
> May 29 17:59:41 smoker pppd[2131]: sent [LCP ConfReq id=0x1 <asyncmap
> 0x0> <magic 0xe7380598> <pcomp> <accomp>]
> May 29 17:59:44 smoker pppd[2131]: sent [LCP ConfReq id=0x1 <asyncmap
> 0x0> <magic 0xe7380598> <pcomp> <accomp>]
> May 29 17:59:47 smoker pppd[2131]: sent [LCP ConfReq id=0x1 <asyncmap
> 0x0> <magic 0xe7380598> <pcomp> <accomp>]
> May 29 17:59:50 smoker pppd[2131]: sent [LCP ConfReq id=0x1 <asyncmap
> 0x0> <magic 0xe7380598> <pcomp> <accomp>]
> May 29 17:59:53 smoker pppd[2131]: sent [LCP ConfReq id=0x1 <asyncmap
> 0x0> <magic 0xe7380598> <pcomp> <accomp>]
> May 29 17:59:56 smoker pppd[2131]: sent [LCP ConfReq id=0x1 <asyncmap
> 0x0> <magic 0xe7380598> <pcomp> <accomp>]
> May 29 17:59:59 smoker pppd[2131]: LCP: timeout sending Config-Requests
> May 29 17:59:59 smoker pppd[2131]: Connection terminated.
> May 29 17:59:59 smoker pppd[2131]: Modem hangup
> May 29 17:59:59 smoker pppd[2131]: Exit.
I did a google search and nothing made sense to me. I did try adding
lcp-max-configure 30 to /etc/ppp/options though. Still no go.
Anybody have a clue on how to fix this??
Thanks
Dale
:-) :-)
--
www.myspace.com/-remove-me-dalek1967
Copy n paste then remove the -remove-me- part.
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [relevance 99%]
Results 1-1 of 1 | reverse | options above
-- pct% links below jump to the message on this page, permalinks otherwise --
2007-05-29 23:25 99% [gentoo-user] Switching to Bellsouth dial-up, trying to anyway. :-( Dale
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox