* Re: [solved] Re: [gentoo-user] Xinerama on 945GM: "Set VBE mode failed"
@ 2007-05-23 16:08 99% ` Allan Gottlieb
0 siblings, 0 replies; 1+ results
From: Allan Gottlieb @ 2007-05-23 16:08 UTC (permalink / raw
To: gentoo-user
At Sun, 20 May 2007 19:13:24 +0200 Gian Domeni Calgeer <gidoca@gmx.ch> wrote:
> Am Sonntag, 20. Mai 2007 17:57 schrieb burlingk@cv63.navy.mil:
>> If you mean to physically plug the device in when you are
>> starting X, that is not a satisfactory option by any means. :/
>
> That is exactly what I mean. The problem seems to be that the BIOS sets the
> external monitor as the default output device if it is already plugged when
> the computer is switched on. Unlike my father's notebook, mine doesn't have
> an option in the BIOS setup to set the internal screen as the default output
> device.
Have you tried booting (with the device plugged in) into single user
mode, then trying to convince the system to use the built in screen as
the default device (fn-f7 on my machine), and finally exiting the
single user shell to go multiuser? (One could also hit fn-f7 while
the system has the grub screen displayed and then go straight to
multiuser.)
I need to use such tricks since my laptop is 1680x1050 while the
external monitor is 1600x1200. I find that having the (text) output
already directed to the external monitor (mine defaults to internal)
prior to xdm/gdm invocation is useful (necessary?) to get 1600x1200
resolution.
allan
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [relevance 99%]
Results 1-1 of 1 | reverse | options above
-- pct% links below jump to the message on this page, permalinks otherwise --
2007-05-20 15:57 [solved] Re: [gentoo-user] Xinerama on 945GM: "Set VBE mode failed" burlingk
2007-05-20 17:13 ` Gian Domeni Calgeer
2007-05-23 16:08 99% ` Allan Gottlieb
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox