* Re: [gentoo-user] Cannot get TV Card to work
@ 2005-07-19 5:54 99% ` Jamie Dobbs
0 siblings, 0 replies; 1+ results
From: Jamie Dobbs @ 2005-07-19 5:54 UTC (permalink / raw
To: gentoo-user
Nick Rout wrote:
>Jamie. we seem to be following each other around the mailing lists. CLUG, mythtv, now here.
>
>You seem to have all the modules loaded, what is not working?
>
>is there a /dev/video/video0?
>does xawtv -c /dev/video/video0 give any output?
>
>
>
Output of xawtv -c /dev/video0
This is xawtv-3.94, running on Linux/i686 (2.6.12-gentoo-r6)
WARNING: Your X-Server has no DGA support.
WARNING: couldn't find framebuffer base address, try manual
configuration ("v4l-conf -a <addr>")
v4l2: open /dev/video0: Permission denied
v4l2: open /dev/video0: Permission denied
v4l: open /dev/video0: Permission denied
no video grabber device available
>
>On Tue, 19 Jul 2005 14:20:48 +1200 (NZST)
>Jamie Dobbs wrote:
>
>
>
>>I've been working on this for several days but do not seem to make any
>>progress.
>>I have a Pinnacle PCTV Stereo card which is based on the Philips saa7134
>>chip. I have recomipled my kernel (2.6.12-gentoo-r6) to include the
>>saa7134 module and i2c support as a module.
>>
>>lsmod output :
>>
>>Module Size Used by
>>tda9887 13144 0
>>saa7134 102996 0
>>tuner 26920 0
>>video_buf 17924 1 saa7134
>>v4l2_common 5184 1 saa7134
>>v4l1_compat 14084 1 saa7134
>>ir_common 6660 1 saa7134
>>videodev 7808 1 saa7134
>>
>>Relevant entries added to my /etc/modules.conf after modules-update is run:
>>(I am in New Zealand and know that card number and tuner number are
>>correct as I have had this card working in Mandrake 10.1 a week or so ago)
>>
>>### modules-update: start processing /etc/modules.d/saa7134
>>options saa7134 card=26 tuner=5 oss=1
>>
>>### modules-update: end processing /etc/modules.d/saa7134
>>
>>### modules-update: start processing /etc/modules.d/tda9887
>>options tda9887 qss=0
>>
>>### modules-update: end processing /etc/modules.d/tda9887
>>
>>My Kernel .config file can be found at
>>http://drgnfire.orcon.net.nz/kernel_config
>>
>>I'd appreciate any feedback on what I might be doing wrong that is causing
>>the TV Card not to work.
>>
>>Once I have the card working my aim is to build a MythTV box using this
>>card, so any pointers on this would also be appreciated (especially from
>>anyone in New Zealand who has experience in this area).
>>
>>Thanks
>>
>>Jamie
>>
>>
>>--
>>gentoo-user@gentoo.org mailing list
>>
>>
>
>
>
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [relevance 99%]
Results 1-1 of 1 | reverse | options above
-- pct% links below jump to the message on this page, permalinks otherwise --
2005-07-19 2:20 [gentoo-user] Cannot get TV Card to work Jamie Dobbs
2005-07-19 4:26 ` Nick Rout
2005-07-19 5:54 99% ` Jamie Dobbs
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox