* [gentoo-user] Re: [kernel 2.6.19-r4] DVD Drive extremely slow
@ 2007-02-01 19:16 99% ` Jakob Buchgraber
0 siblings, 0 replies; 1+ results
From: Jakob Buchgraber @ 2007-02-01 19:16 UTC (permalink / raw
To: gentoo-user
I am sorry for sending an HTML mail. Here is the plain text version :-)
----------------------------------------------------------------------------------------
Hey everybody!
I've upgraded to kernel 2.6.19 (gentoo sources) a few days ago however I
can't get my DVD Drive working correctly.
I got an Dell Inspiron 9400 Royal. lspci tells me that I have an ICH7
Chipset [00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7
Family) Serial ATA Storage Controller IDE (rev 01)]
Here is all my relevant kernel configuration:
Serial ATA (prod) and Parallel ATA (experimental) drivers
<*> ATA device support
<*> AHCI SATA support
<*> Intel PIIX/ICH SATA support
ATA/ATAPI/MFM/RLL support
< > ATA/ATAPI/MFM/RLL support
SCSI device support
<*> SCSI disk support
<*> SCSI CDROM support
<*> SCSI generic support
DMA Engine support
[*] Support for DMA engines
[*] Network: TCP receive copy offload
< > Intel I/OAT DMA support
My SATA DVD Drive is configured as an UDMA/33 Drive as dmesg | grep DMA
tells me
...
ata2.00: ATAPI, max UDMA/33
ata2.00: configured for UDMA/33
...
Btw.: It worked perfectly well under openSUSE 10.2 (don't have it
installed anymore, so I can't check which drivers were used) and gentoo
kernel 2.6.18-r6 (I also used the ATA_PIIX driver there).
Any hints?
Cheers,
Jay
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [relevance 99%]
Results 1-1 of 1 | reverse | options above
-- pct% links below jump to the message on this page, permalinks otherwise --
2007-02-01 18:15 [gentoo-user] [kernel 2.6.19-r4] DVD Drive extremely slow Jakob Buchgraber
2007-02-01 19:16 99% ` [gentoo-user] " Jakob Buchgraber
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox