* [gentoo-user] Re: HP ScanJet 6300C
@ 2009-10-21 16:23 99% ` James
0 siblings, 0 replies; 1+ results
From: James @ 2009-10-21 16:23 UTC (permalink / raw
To: gentoo-user
James <wireless <at> tampabay.rr.com> writes:
Well, monkeying around with all the cables It now registers
as a:
Bus 002 Device 005: ID 03f0:0601 Hewlett-Packard ScanJet 6300c
scanimage -L
device `hp:libusb:002:005' is a Hewlett-Packard ScanJet 63x0C flatbed scanner
So I guess I need some advice as to a software front end or some syntax
examples to use the scanner. It has an ADF, Automatic Document Feeder,
which work be keen to get working or figure out how to use. It works fine
under windows with the scsi card. I'ts not on a gentoo system via a
usb cable.....
The sane website says support is "complete".....
any suggestions are most welcome.
James
^ permalink raw reply [relevance 99%]
Results 1-1 of 1 | reverse | options above
-- pct% links below jump to the message on this page, permalinks otherwise --
2009-10-21 16:13 [gentoo-user] HP ScanJet 7670 James
2009-10-21 16:23 99% ` [gentoo-user] Re: HP ScanJet 6300C James
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox