* Re: [gentoo-user] What about kernel 2.6.19 ?
@ 2007-02-17 19:11 99% ` Dan Farrell
0 siblings, 0 replies; 1+ results
From: Dan Farrell @ 2007-02-17 19:11 UTC (permalink / raw
To: gentoo-user
On Sun, 18 Feb 2007 05:31:21 +1030
Raymond Lewis Rebbeck <dystopianray@gmail.com> wrote:
> On Sunday, 18 February 2007 5:25, alain.didierjean@free.fr wrote:
> > Just compiled kernel 2.6.19-r5, with same config as 2.6.18-r6.
> > When trying to boot it, I get a kernel panic, grub not finding
> > (hd0,0), when booting 2.6.18 doesn't cause any problem. What's new
> > in 2.6.19 that causes this? What's the solution ? Help welcome.
> >
> > --
> > ~adj~
>
> It's probably due to the SATA drivers being moved out of the SCSI
> section of menuconfig, which iirc, changed their CONFIG names.
>
> You should double check that all your required drivers have been
> configured.
>
I tried kernel 2.19 and the new libata PATA drivers and all seemed to
work fine, execpt I too got the same kernel panic with not
finding /dev/hd[a-z][0-9]+. I think the names of these device nodes
might have changed? I'm not sure but my theory is that if i would have
used the older ATA drivers instead, things would have been fine.
People _Are_ running the 2.6.19 kernels successfully.
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [relevance 99%]
Results 1-1 of 1 | reverse | options above
-- pct% links below jump to the message on this page, permalinks otherwise --
2007-02-17 18:55 [gentoo-user] What about kernel 2.6.19 ? alain.didierjean
2007-02-17 19:01 ` Raymond Lewis Rebbeck
2007-02-17 19:11 99% ` Dan Farrell
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox