* Re: [gentoo-user] Routing: how to enable..
@ 2007-02-17 20:42 99% ` JT Justman
0 siblings, 0 replies; 1+ results
From: JT Justman @ 2007-02-17 20:42 UTC (permalink / raw
To: gentoo-user
Roman Naumann wrote:
> Hi, please forgive this most probably very simple question, but I cannot find
> the correct configuration file to enable routing...
>
> I have two PCs, one HAS a internet connection to the internet-proxy, the
> other one hasn't.
> The internet-pc (and I do not mean the proxy-pc) has two ethernet devices,
> ra0 and eth0.
>
> eth0 connects it with the non-internet pc.
>
> I set up a route to the internet-proxy-px on the internet-pc and it works
> fine on it, but the the non-internet pc can't use it!
>
> Even though the non-internet pc has it's default gw set to the eth0 ip of the
> internet pc.
>
> Thanks for your help.
Roman,
I'm not quite clear on your configuration. What sort of device is the
internet-proxy? Is it a NAT router, or something else? Are all three
devices in the same subnet? It sounds like you're either trying to work
around not having a hub, or not having a NAT device.
JT
--
Web: http://www.signless.com
E-Mail: jt@signless.com
Voice: (503) 616-4816
Cell: (503) 419-8806
Skype: jt.justman
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [relevance 99%]
Results 1-1 of 1 | reverse | options above
-- pct% links below jump to the message on this page, permalinks otherwise --
2007-02-17 20:22 [gentoo-user] Routing: how to enable Roman Naumann
2007-02-17 20:42 99% ` JT Justman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox