* [gentoo-user] Re: Any UPS recommendations?
@ 2013-01-08 18:45 99% ` James
0 siblings, 0 replies; 1+ results
From: James @ 2013-01-08 18:45 UTC (permalink / raw
To: gentoo-user
Walter Dnes <waltdnes <at> waltdnes.org> writes:
>
> I think my UPS is dying. Time to get a new one. It's been years, so
> there may be new tech out there I don't know about. My normal usage is
> * 1 LCD monitor 24"
> * 1 (sometimes 2) "desktop" PCs connected to the monitor
> * 1 ADSL router/modem
>
> What brand and VA rating would people recommend.
1000VA would be the minimum with the monitor connected.
The monitor spec should say what the power draw (amps)
is. Then determine the power draw of your workstation.
(a $50 amp meter from a hardware store will measure this).
If you do not wish to purchase the amp meter, just keep
the packing and return it after use.
Do not plug a printer into the battery protected circuits
on the UPS, just the surge protection. Printers draw heavy
amperage for short durations that can kill a UPS.
> The stuff I'm
> concerned about is the 2 or 3 times a year I get power flickers, or a
> short outage. And also, if power is out for more than 5 minutes, and
> the battery is running low, I want the PC to be able to sense that and
> execute /usr/sbin/hibernate.
http://www.networkupstools.org/docs/man/tripplite_usb.html
Triplite, my brand of choice, should work with NUT. Never set
it up myself.
Make sure the UPS you choose, internally uses the Standard 12VDC-7AH
jell cell battery as they are easy to find and replace and cost
effective. Often, that is all an older UPS needs.
Google for "Sealed Lead acid Battery 12V 7Ah" with F2 connectors
after looking inside at the battery(s) currently in your UPS.
hth,
James
^ permalink raw reply [relevance 99%]
Results 1-1 of 1 | reverse | options above
-- pct% links below jump to the message on this page, permalinks otherwise --
2013-01-08 13:01 [gentoo-user] Any UPS recommendations? Walter Dnes
2013-01-08 18:45 99% ` [gentoo-user] " James
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox