[gentoo-user] reading data cd/dvd

[gentoo-user] reading data cd/dvd

[allan gottlieb]

All my machines run gentoo / systemd / gnome3

On my older laptop when I plug in a data cd I get a popup suggesting
that I open it with files.  All is well

On my newer laptop the disk spins up but no popup appears.
What must I configure?

On the old machine there is a directory /run/media/ with a subdirectory
gottlieb.  The data cd is mounted there.  Looking at df gives
/dev/sr0        286490   286490      0 100% /run/media/gottlieb/COD3E

The new machine does not even have /dev/sr0.

Am I missing a kernel option

I have the following in scsi device support.

      < > RAID Transport Class                                     
      -*- SCSI device support                                      
      [ ] SCSI: use blk-mq I/O path by default                     
      [*] legacy /proc/scsi/ support                               
          *** SCSI support type (disk, tape, CD-ROM) ***           
      <*> SCSI disk support                                        
      < > SCSI tape support                                        
      < > SCSI OnStream SC-x0 tape support                         
      <*> SCSI CDROM support                                       
      [*]   Enable vendor-specific extensions (for SCSI CDROM)     
      <*> SCSI generic support                                     
      < > SCSI media changer support                               
      [*] Verbose SCSI error reporting (kernel size +=12K)         
      [ ] SCSI logging facility                                    
      [ ] Asynchronous SCSI scanning                               
          SCSI Transports  --->                                    
      [ ] SCSI low-level drivers  ----                             
      [ ] PCMCIA SCSI adapter support  ----                        
      < > SCSI Device Handlers  ----                               
      < > OSD-Initiator library                                    

Thanks in advance for any help.
allan

Re: [gentoo-user] reading data cd/dvd

[Philip Webb]

151110 allan gottlieb wrote:
> All my machines run gentoo / systemd / gnome3
> On my older laptop when I plug in a data cd I get a popup
> suggesting that I open it with files.  All is well
> On my newer laptop the disk spins up but no popup appears.
> What must I configure?
> On the old machine there is a dir /run/media/ with a subdir gottlieb.
> The data cd is mounted there.  Looking at df gives
> /dev/sr0        286490   286490      0 100% /run/media/gottlieb/COD3E
> The new machine does not even have /dev/sr0.
> Am I missing a kernel option ?
 
My note from recently installing Gentoo on a newly built machine :
"for DVD drive, use BLK_DEV_SR to create /dev/sr0 ".
Use 'make menuconfig' + search to find that string, then set the option.

BTW I try to do things as simply as possible :
using Fluxbox + Openrc, I mount  /dev/sr0  on  /mnt/dvd  (as root),
then (as user) 'cd /mnt/dvd' & use Most/Mupdf/Feh/etc to look at the files.
Quick, effective, foolproof ... (smile)

-- 
========================,,============================================
SUPPORT     ___________//___,   Philip Webb
ELECTRIC   /] [] [] [] [] []|   Cities Centre, University of Toronto
TRANSIT    `-O----------O---'   purslowatchassdotutorontodotca

Re: [gentoo-user] reading data cd/dvd

[David Haller]

Hello,

On Wed, 11 Nov 2015, Philip Webb wrote:
>151110 allan gottlieb wrote:
>> All my machines run gentoo / systemd / gnome3
>> On my older laptop when I plug in a data cd I get a popup
>> suggesting that I open it with files.  All is well
>> On my newer laptop the disk spins up but no popup appears.
>> What must I configure?
>> On the old machine there is a dir /run/media/ with a subdir gottlieb.
>> The data cd is mounted there.  Looking at df gives
>> /dev/sr0        286490   286490      0 100% /run/media/gottlieb/COD3E
>> The new machine does not even have /dev/sr0.
>> Am I missing a kernel option ?
> 
>My note from recently installing Gentoo on a newly built machine :
>"for DVD drive, use BLK_DEV_SR to create /dev/sr0 ".

That's the "SCSI CDROM support" he already has.

>BTW I try to do things as simply as possible :
>using Fluxbox + Openrc, I mount  /dev/sr0  on  /mnt/dvd  (as root),
>then (as user) 'cd /mnt/dvd' & use Most/Mupdf/Feh/etc to look at the files.
>Quick, effective, foolproof ... (smile)

Add the device(s) to fstab like so:

/dev/cdrom              /cdrom  auto            noauto,ro,user,users    0 0
/dev/dvd                /dvd    auto            noauto,ro,user,users    0 0

if you have udev setting those symlinks, else use /dev/sr* instead.

But what I think is missing is some feature of the desktop, aka
"device actions", possibly sys-apps/gnome-disk-utility and some
digging in the gnome-config. I do not use gnome.

HTH,
-dnh

-- 
> Wenn er SSH sperrt aber Telnet offen läßt ist er kein Admin.
Sondern ein Bonfigt?       -- J. Nieveler u. S. Posner in dasr

Re: [gentoo-user] reading data cd/dvd

[Neil Bothwick]

[-- Attachment #1: Type: text/plain, Size: 888 bytes --]

On Wed, 11 Nov 2015 11:01:10 +0100, David Haller wrote:

> Add the device(s) to fstab like so:
> 
> /dev/cdrom              /cdrom  auto            noauto,ro,user,users
> 0 0 /dev/dvd                /dvd    auto
> noauto,ro,user,users    0 0
> 
> if you have udev setting those symlinks, else use /dev/sr* instead.
> 
> But what I think is missing is some feature of the desktop, aka
> "device actions", possibly sys-apps/gnome-disk-utility and some
> digging in the gnome-config.

He doesn't have /dev/sr0 so no amount of fstab or automounter fiddling
will mount a CD that isn't there. This appears to be a missing kernel
option.

Is this a built in optical drive or a USB one?


-- 
Neil Bothwick

Q. How many radical feminists does it take to change a light bulb?
A. Two - one to change the bulb and one to write a book about the passive
role of the socket.

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

Re: [gentoo-user] reading data cd/dvd

[allan gottlieb]

On Wed, Nov 11 2015, Neil Bothwick wrote:

> On Wed, 11 Nov 2015 11:01:10 +0100, David Haller wrote:
>
>> Add the device(s) to fstab like so:
>> 
>> /dev/cdrom              /cdrom  auto            noauto,ro,user,users
>> 0 0 /dev/dvd                /dvd    auto
>> noauto,ro,user,users    0 0
>> 
>> if you have udev setting those symlinks, else use /dev/sr* instead.
>> 
>> But what I think is missing is some feature of the desktop, aka
>> "device actions", possibly sys-apps/gnome-disk-utility and some
>> digging in the gnome-config.
>
> He doesn't have /dev/sr0 so no amount of fstab or automounter fiddling
> will mount a CD that isn't there. This appears to be a missing kernel
> option.

That was my thought as well.

> Is this a built in optical drive or a USB one?

Interesting question.
The old (successful) laptop has a built in optical drive
The new (unsuccessful) laptop has a USB optical drive
*However* My desktop machine (not mentioned previously)
   has a built in optical and has the same problem as
   the new laptop

Thank you all
allan

Re: [gentoo-user] reading data cd/dvd

[David Haller]

Hello Neil,

On Wed, 11 Nov 2015, Neil Bothwick wrote:
>On Wed, 11 Nov 2015 11:01:10 +0100, David Haller wrote:
>> Add the device(s) to fstab like so:
>> 
>> /dev/cdrom              /cdrom  auto            noauto,ro,user,users
>> 0 0 /dev/dvd                /dvd    auto
>> noauto,ro,user,users    0 0
>> 
>> if you have udev setting those symlinks, else use /dev/sr* instead.
>> 
>> But what I think is missing is some feature of the desktop, aka
>> "device actions", possibly sys-apps/gnome-disk-utility and some
>> digging in the gnome-config.
>
>He doesn't have /dev/sr0 so no amount of fstab or automounter fiddling
>will mount a CD that isn't there. This appears to be a missing kernel
>option.

Hm. Neil, you're right. From the OP though:

      <*> SCSI CDROM support

which is CONFIG_BLK_DEV_SR which is sr_mod which provides /dev/sr*. So
he has sr_mod built into the kernel. No module to load. Should not
compile without the requires. Hm. Maybe a missing chipset-driver like
pata_atiixp as I use?

Or systemd-udev etc. is hiccupping, so the kernel (sr_mod) provides
the dev "per se" but there's no /dev/sr* device-node created, so let's
start at the "bottom" and have a look at dmesg and some stuff ...

@allan gottlieb:

- how is that drive connected?

- Please mail the outputs of

    lsmod

    lspci

    lsscsi | grep -E 'cd|process'

    hwinfo --cdrom

(the latter is from sys-apps/hwinfo) all run as root.

Oh, and please also paste the output of

    zgrep -F -e ATA -e SCSI /proc/config.gz
or
    grep  -F -e ATA -e SCSI /boot/config-`uname -r`
or
    grep  -F -e ATA -e SCSI /usr/src/linux/.config

whatever matches your kernel best ;)

And capture the output of 'dmesg' for pasting to e.g. pastebin.org[0],
or better e.g. just the output of

    dmesg | grep -Ei 'ata|sr|scd|scsi'

and/or mail the complete dmesg output just via PM to me (or Neil??) to
filter out and quote what's relevant (there might be stuff related not
captured by the 'grep -Ei'), no need to blast all that over the 'net.

-dnh

[0] has gentoo.org a "paste" service for such stuff? (I'm just lazy)

-- 
Carter: Besides, all we're really doing is plugging your ship into
my battery.                      -- Stargate SG-1, 6x18 - Forsaken

Re: [gentoo-user] reading data cd/dvd

[allan gottlieb]

On Wed, Nov 11 2015, David Haller wrote:

> Hello Neil,
>
> On Wed, 11 Nov 2015, Neil Bothwick wrote:
>>On Wed, 11 Nov 2015 11:01:10 +0100, David Haller wrote:
>>> Add the device(s) to fstab like so:
>>> 
>>> /dev/cdrom              /cdrom  auto            noauto,ro,user,users
>>> 0 0 /dev/dvd                /dvd    auto
>>> noauto,ro,user,users    0 0
>>> 
>>> if you have udev setting those symlinks, else use /dev/sr* instead.
>>> 
>>> But what I think is missing is some feature of the desktop, aka
>>> "device actions", possibly sys-apps/gnome-disk-utility and some
>>> digging in the gnome-config.
>>
>>He doesn't have /dev/sr0 so no amount of fstab or automounter fiddling
>>will mount a CD that isn't there. This appears to be a missing kernel
>>option.
>
> Hm. Neil, you're right. From the OP though:
>
>       <*> SCSI CDROM support
>
> which is CONFIG_BLK_DEV_SR which is sr_mod which provides /dev/sr*. So
> he has sr_mod built into the kernel. No module to load. Should not
> compile without the requires. Hm. Maybe a missing chipset-driver like
> pata_atiixp as I use?
>
> Or systemd-udev etc. is hiccupping, so the kernel (sr_mod) provides
> the dev "per se" but there's no /dev/sr* device-node created, so let's
> start at the "bottom" and have a look at dmesg and some stuff ...
>
> @allan gottlieb:

GACK the lack of /dev/sr0 is spurious.  At the point I looked
the (usb) drive was not plugged in.  When plugged in we have

brw-rw----+ 1 root cdrom 11, 0 Nov 11 14:55 /dev/sr0

Very sorry about that.

What is true is that when I insert a known good disk in the drive I do
*not* get a media subdirectory of /run.  With the old laptop with a
built-in drive with the same cdrom media I have /run/media/gottlieb
and a subdirectory of that directory has the contents of the drive.

All the following are on the new laptop with the drive installed via usb
and the known good media inserted

> - how is that drive connected?

via usb

> - Please mail the outputs of
>
>     lsmod

Module                  Size  Used by
hid_logitech_dj         9504  0
iwlmvm                142993  0
mac80211              425803  1 iwlmvm
x86_pkg_temp_thermal     4567  0
iwlwifi                88075  1 iwlmvm


>     lspci

00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Broadwell-U Integrated Graphics (rev 09)
00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 09)
00:04.0 Signal processing controller: Intel Corporation Broadwell-U Camarillo Device (rev 09)
00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI Controller (rev 03)
00:16.0 Communication controller: Intel Corporation Wildcat Point-LP MEI Controller #1 (rev 03)
00:19.0 Ethernet controller: Intel Corporation Ethernet Connection (3) I218-LM (rev 03)
00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High Definition Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #1 (rev e3)
00:1c.3 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #4 (rev e3)
00:1c.4 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #5 (rev e3)
00:1d.0 USB controller: Intel Corporation Wildcat Point-LP USB EHCI Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC Controller (rev 03)
00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 03)
00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller (rev 03)
01:00.0 SD Host controller: O2 Micro, Inc. SD/MMC Card Reader Controller (rev 01)
02:00.0 Network controller: Intel Corporation Wireless 7265 (rev 59)

>     lsscsi | grep -E 'cd|process'

Not on my system, what should I emerge?

>     hwinfo --cdrom
>
> (the latter is from sys-apps/hwinfo) all run as root.

Returns nothing when the (usb) cdrom is out.  When plugged in the output
is

20: SCSI 300.0: 10602 CD-ROM (DVD)                              
  [Created at block.249]
  Unique ID: BobO.5ZGK3_euMPD
  Parent ID: 1GTX.w_zDrmylnoE
  SysFS ID: /class/block/sr0
  SysFS BusID: 3:0:0:0
  SysFS Device Link: /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2:1.0/host3/target3:0:0/3:0:0:0
  Hardware Class: cdrom
  Model: "HL-DT-ST DVDRAM AP70NS50"
  Vendor: usb 0x0e8d "HL-DT-ST"
  Device: usb 0x1887 "DVDRAM AP70NS50"
  Revision: "1.00"
  Serial ID: "KZ9F1GG3213"
  Driver: "usb-storage", "sr"
  Driver Modules: "usb_storage"
  Device File: /dev/sr0 (/dev/sg2)
  Device Number: block 11:0 (char 21:2)
  Features: CD-R, CD-RW, DVD, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL, DVD-RAM, MRW, MRW-W
  Speed: 480 Mbps
  Module Alias: "usb:v0E8Dp1887d0000dc00dsc00dp00ic08isc02ip50in00"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #12 (USB Controller)
  Drive Speed: 24
  Volume ID: "COD3E"
  Application: "NERO BURNING ROM"
  Creation date: "2007050910420000"

> Oh, and please also paste the output of
>
>     zgrep -F -e ATA -e SCSI /proc/config.gz
> or
>     grep  -F -e ATA -e SCSI /boot/config-`uname -r`
> or
>     grep  -F -e ATA -e SCSI /usr/src/linux/.config
>
> whatever matches your kernel best ;)

CONFIG_ARCH_CLOCKSOURCE_DATA=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_RELOCATABLE=y
# CONFIG_ATALK is not set
# CONFIG_ATA_OVER_ETH is not set
# SCSI device support
CONFIG_SCSI_MOD=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y
# SCSI support type (disk, tape, CD-ROM)
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
# SCSI Transports
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
# SATA SFF controllers with BMDMA
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# PATA SFF controllers with BMDMA
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
CONFIG_PATA_SCH=y
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_ISCSI_IBFT_FIND is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set


> And capture the output of 'dmesg' for pasting to e.g. pastebin.org[0],
> or better e.g. just the output of
>
>     dmesg | grep -Ei 'ata|sr|scd|scsi'
>
> and/or mail the complete dmesg output just via PM to me (or Neil??) to
> filter out and quote what's relevant (there might be stuff related not
> captured by the 'grep -Ei'), no need to blast all that over the 'net.
>
> -dnh
>
> [0] has gentoo.org a "paste" service for such stuff? (I'm just lazy)

I put the entire dmesg output on my nyu website
http://cs.nyu.edu/~gottlieb/dmesg

thanks to all for your help and again sorry about looking for /dev/sr0
when the drive was not plugged in.

allan

Re: [gentoo-user] reading data cd/dvd

[Walter Dnes]

On Wed, Nov 11, 2015 at 04:05:29AM -0500, Philip Webb wrote

> My note from recently installing Gentoo on a newly built machine :
> "for DVD drive, use BLK_DEV_SR to create /dev/sr0 ".
> Use 'make menuconfig' + search to find that string, then set the option.
> 
> BTW I try to do things as simply as possible :
> using Fluxbox + Openrc, I mount  /dev/sr0  on  /mnt/dvd  (as root),
> then (as user) 'cd /mnt/dvd' & use Most/Mupdf/Feh/etc to look at the files.
> Quick, effective, foolproof ... (smile)

  In my /etc/fstab, I have...

/dev/cdrom              /mnt/cdrom  iso9660  noauto,users,ro          0 0
/dev/sr0                /mnt/dvd    auto     noauto,users,ro          0 0

...to handle the 2 devices on my system.  The corresponding lines will
probably be different on your system.  The advantage is that I can mount
and umount as a regular user.  BTW, I run ICEWM.

-- 
Walter Dnes <waltdnes@waltdnes.org>
I don't run "desktop environments"; I run useful applications