public inbox for gentoo-user@lists.gentoo.org
 help / color / mirror / Atom feed
* Re: [gentoo-user] After upgrading to the latest Baselayout... (Oops - slip of the thumb)
@ 2006-02-28 11:39 Alan E. Davis
  2006-02-28 15:33 ` Richard Fish
  0 siblings, 1 reply; 3+ messages in thread
From: Alan E. Davis @ 2006-02-28 11:39 UTC (permalink / raw
  To: gentoo-user

Oops, my thumb slipped before i had finished my message, so
continuing, I had tried

        emerge --sync
        emerge --depclean
        revdep-rebuild
         glsa-check -f all

The system seemed then to catch up with all of the inconsistencies. 
Furthermore, the same has happened to me many times.  Almost every
serious problem I have had has been solved in somewhat the same way.  
I cling to these procedures like a blind man clings to a wall.

Sorry for the bodged message.

Alan Davis

On 2/28/06, Alan E. Davis <lngndvs@gmail.com> wrote:
> I am pretty much clueless, in general; however, I might report that I,
> too, recently experienced this same breakdown in all of the net
> interfaces on one of my machines.  This appeared after a massive
> update to a ~x86 system involving over 700MB of downloads.  It took
> several days to perform the update, and --- albeit I cannot pinpoint
> the exact cause of my griefs (X11 also failed when started from the
> enlightenment display manager 'entrance') after I had finally gotten
> my network connection established and run all of the following,
> everything works again.
>
>                 emerge --sync
>

-- 
gentoo-user@gentoo.org mailing list



^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [gentoo-user] After upgrading to the latest Baselayout... (Oops - slip of the thumb)
  2006-02-28 11:39 [gentoo-user] After upgrading to the latest Baselayout... (Oops - slip of the thumb) Alan E. Davis
@ 2006-02-28 15:33 ` Richard Fish
  2006-03-01  2:07   ` Alan E. Davis
  0 siblings, 1 reply; 3+ messages in thread
From: Richard Fish @ 2006-02-28 15:33 UTC (permalink / raw
  To: gentoo-user

On 2/28/06, Alan E. Davis <lngndvs@gmail.com> wrote:
>         emerge --sync
>         emerge --depclean
>         revdep-rebuild
>          glsa-check -f all
>
> The system seemed then to catch up with all of the inconsistencies.
> Furthermore, the same has happened to me many times.  Almost every
> serious problem I have had has been solved in somewhat the same way.
> I cling to these procedures like a blind man clings to a wall.


You are missing a step.

etc-update

-Richard

-- 
gentoo-user@gentoo.org mailing list



^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [gentoo-user] After upgrading to the latest Baselayout... (Oops - slip of the thumb)
  2006-02-28 15:33 ` Richard Fish
@ 2006-03-01  2:07   ` Alan E. Davis
  0 siblings, 0 replies; 3+ messages in thread
From: Alan E. Davis @ 2006-03-01  2:07 UTC (permalink / raw
  To: gentoo-user

Yes.  I am using dispatch-conf.  Do you find it to be adequate?

Alan

On 3/1/06, Richard Fish <bigfish@asmallpond.org> wrote:
> On 2/28/06, Alan E. Davis <lngndvs@gmail.com> wrote:
> >         emerge --sync
> >         emerge --depclean
> >         revdep-rebuild
> >          glsa-check -f all
> >
> > The system seemed then to catch up with all of the inconsistencies.
> > Furthermore, the same has happened to me many times.  Almost every
> > serious problem I have had has been solved in somewhat the same way.
> > I cling to these procedures like a blind man clings to a wall.
>
>
> You are missing a step.
>
> etc-update
>
> -Richard
>
> --
> gentoo-user@gentoo.org mailing list
>
>

-- 
gentoo-user@gentoo.org mailing list



^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2006-03-01  2:14 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-02-28 11:39 [gentoo-user] After upgrading to the latest Baselayout... (Oops - slip of the thumb) Alan E. Davis
2006-02-28 15:33 ` Richard Fish
2006-03-01  2:07   ` Alan E. Davis

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox