[gentoo-user] wvdial: dialup for users

[gentoo-user] wvdial: dialup for users

[Alan E. Davis]

[-- Attachment #1: Type: text/plain, Size: 340 bytes --]

I have tried alot of approaches.  Wvdial is superior for detecting hardware:
it found my modem on ttyS14, where other approaches hadn't found it.

What I cannot seem to do is set up for my family to dial in from their
accounts.  I have tried changing permissions of various kinds, adding user
to dialout, etc.

UNCLE!

Alan Davis

[-- Attachment #2: Type: text/html, Size: 393 bytes --]

Re: [gentoo-user] wvdial: dialup for users

[Dale]

Alan E. Davis wrote:

> I have tried alot of approaches.  Wvdial is superior for detecting
> hardware: it found my modem on ttyS14, where other approaches hadn't
> found it. 
>
> What I cannot seem to do is set up for my family to dial in from their
> accounts.  I have tried changing permissions of various kinds, adding
> user to dialout, etc. 
>
> UNCLE!
>
> Alan Davis

Well, I use ppp and the comand pon and poff.  It works pretty well. 
emerge ppp and then config with pppconfig.  To connect, pon, to
disconnect, poff.  That would be as root, there should be a way to make
users do it though.  I'm not sure how.

Now wvdial, it dials out, then sits for a minute, then disconnects with
the error that my password is wrong, which is crap because it is
correct.  I only got wvdial to work once on another rig.  It has never
worked on this one though.  Anybody have a clue on that one?  I just
like to have options in case it pours instead of just a little shower.

My $.02 and a question as well.

Dale
:-)

-- 
To err is human, I'm most certainly human.

 

-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] wvdial: dialup for users

[Nick Rout]

There are a couple of groups that you need to add your users to. -
"dialout" and "uucp".

Reading the message at the end of emerging wvdial tells you this. Also
reading the ebuild gives you the same information.

I am not criticising you, thiose messages flash by very quickly, and
reading the ebuild is not everyone's first port of call, but if I
educate one person to read the documentation and save one query to the
list i guess my job is done :-)

PS don't forget you have to log in again after you have been added to a
group. and "id" is a good command to see what groups you are in.



On Sun, 27 Nov 2005 12:15:15 +1000
"Alan E. Davis" <lngndvs@gmail.com> wrote:

> I have tried alot of approaches.  Wvdial is superior for detecting hardware:
> it found my modem on ttyS14, where other approaches hadn't found it.
> 
> What I cannot seem to do is set up for my family to dial in from their
> accounts.  I have tried changing permissions of various kinds, adding user
> to dialout, etc.
> 
> UNCLE!
> 
> Alan Davis
> 
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] wvdial: dialup for users

[Norberto Bensa]

Alan E. Davis wrote:
> I have tried changing permissions of various kinds, adding user
> to dialout, etc.

Add them to "tty" group ;)

-- 
Norberto Bensa
4544-9692
Ciudad de Buenos Aires, Argentina
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] wvdial: dialup for users

[Robert Crawford]

On Sat November 26 2005 9:15 pm, Alan E. Davis wrote:
> I have tried alot of approaches.  Wvdial is superior for detecting
> hardware: it found my modem on ttyS14, where other approaches hadn't found
> it.
>
> What I cannot seem to do is set up for my family to dial in from their
> accounts.  I have tried changing permissions of various kinds, adding user
> to dialout, etc.
>
> UNCLE!
>
> Alan Davis

Try these thread on the forums- I posted my experience with wvdial- it should 
fix your problems.

http://forums.gentoo.org/viewtopic.php?t=112214&highlight=

or:

http://forums.gentoo.org/viewtopic-t-160597-highlight-wvdial+wrc1944.html


-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] wvdial: dialup for users

[John J. Foster]

[-- Attachment #1: Type: text/plain, Size: 537 bytes --]

On Sat, Nov 26, 2005 at 10:20:15PM -0600, Dale wrote:
> 
> Now wvdial, it dials out, then sits for a minute, then disconnects with
> the error that my password is wrong, which is crap because it is
> correct.  I only got wvdial to work once on another rig.  It has never
> worked on this one though.  Anybody have a clue on that one?  I just
> like to have options in case it pours instead of just a little shower.

Hi Dale - I had the same problem until I set

Stupid Mode=yes in /etc/wvdial.conf. All was fine then.

John

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

Re: [gentoo-user] wvdial: dialup for users

[b.n.]

Alan E. Davis wrote:
> I have tried alot of approaches.  Wvdial is superior for detecting 
> hardware: it found my modem on ttyS14, where other approaches hadn't 
> found it. 
> 
> What I cannot seem to do is set up for my family to dial in from their 
> accounts.  I have tried changing permissions of various kinds, adding 
> user to dialout, etc. 

suid the wvdial binary.
m.
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] wvdial: dialup for users

[maxim wexler]

> 
> Well, I use ppp and the comand pon and poff.  It
> works pretty well. 
> emerge ppp and then config with pppconfig.  To
> connect, pon, to
> disconnect, poff.  That would be as root, there
> should be a way to make
> users do it though.  I'm not sure how.

$sudo /usr/sbin/pon(poff) <provider-name>

> 
> Now wvdial, it dials out, then sits for a minute,
> then disconnects with
> the error that my password is wrong, which is crap
> because it is
> correct.  I only got wvdial to work once on another
> rig.  It has never
> worked on this one though.  Anybody have a clue on
> that one?  I just
> like to have options in case it pours instead of
> just a little shower.
> 
> My $.02 and a question as well.

I also found pppconfig superior to wvdial


	
		
__________________________________ 
Yahoo! Mail - PC Magazine Editors' Choice 2005 
http://mail.yahoo.com
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] wvdial: dialup for users

[Nick Rout]

On Sun, 27 Nov 2005 14:33:09 +0000
"b.n." <brullonulla@gmail.com> wrote:

> Alan E. Davis wrote:
> > I have tried alot of approaches.  Wvdial is superior for detecting 
> > hardware: it found my modem on ttyS14, where other approaches hadn't 
> > found it. 
> > 
> > What I cannot seem to do is set up for my family to dial in from their 
> > accounts.  I have tried changing permissions of various kinds, adding 
> > user to dialout, etc. 
> 
> suid the wvdial binary.
> m.

Don't do that! Just set the user in the correct groups per the
instructions in the ebuild!

suid is very rarely the correct answer. If it was the ebuild would do
it for you.


> -- 
> gentoo-user@gentoo.org mailing list
> 
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] wvdial: dialup for users

[Alan E. Davis]

[-- Attachment #1: Type: text/plain, Size: 1845 bytes --]

I haven't tried setuid for the wvdial binary.  I have joined the users to
the groups "dialout" and "uucp".  I have also changed the owner of various
binaries to include users, including "wvdial".  I followed someone's advice
on the Inet and set pppd setuid for the group "ppp" which I also joined all
users to.

I don't want my wife to have to "sudo yada yada."  I want to grant her
permissions.  I have used pppconfig for years.  It won't find /dev/ttyS14,
while wvdial did, uniquely among all dialup clients I have tried.  kppp
didn't.  I had to make the tty's with MAKEDEV.   Maybe I can use pppconfig
now that I have found out the dev file.  Wvdial works well.

I would ideally like my wife to be able to click on a modem icon / applet to
dial in and to quit.  I understand why in a server environment, one would be
paranoid.  I WANT to grant this permission to users at my discretion.

Thank you for the ideas, everyone.  I will follow them up.

Alan Davis

On 11/28/05, Nick Rout <nick@rout.co.nz> wrote:
>
> On Sun, 27 Nov 2005 14:33:09 +0000
> "b.n." <brullonulla@gmail.com> wrote:
>
> > Alan E. Davis wrote:
> > > I have tried alot of approaches.  Wvdial is superior for detecting
> > > hardware: it found my modem on ttyS14, where other approaches hadn't
> > > found it.
> > >
> > > What I cannot seem to do is set up for my family to dial in from their
> > > accounts.  I have tried changing permissions of various kinds, adding
> > > user to dialout, etc.
> >
> > suid the wvdial binary.
> > m.
>
> Don't do that! Just set the user in the correct groups per the
> instructions in the ebuild!
>
> suid is very rarely the correct answer. If it was the ebuild would do
> it for you.
>
>
> > --
> > gentoo-user@gentoo.org mailing list
> >
> --
> gentoo-user@gentoo.org mailing list
>
>

[-- Attachment #2: Type: text/html, Size: 2515 bytes --]

Re: [gentoo-user] wvdial: dialup for users

[Dale]

John J. Foster wrote:

>On Sat, Nov 26, 2005 at 10:20:15PM -0600, Dale wrote:
>  
>
>>Now wvdial, it dials out, then sits for a minute, then disconnects with
>>the error that my password is wrong, which is crap because it is
>>correct.  I only got wvdial to work once on another rig.  It has never
>>worked on this one though.  Anybody have a clue on that one?  I just
>>like to have options in case it pours instead of just a little shower.
>>    
>>
>
>Hi Dale - I had the same problem until I set
>
>Stupid Mode=yes in /etc/wvdial.conf. All was fine then.
>
>John
>  
>
Thanks for that tip.  I'll try that.  I like to have as many back-ups as
I can get.  If it were not for bad luck, I would have no luck at all. 
Well, there is the exception of my girlfriend.  She is the best thing,
person, to happen yet.

Dale
:-)

-- 
To err is human, I'm most certainly human.

 

-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] wvdial: dialup for users

[Alan E. Davis]

[-- Attachment #1: Type: text/plain, Size: 1683 bytes --]

I've been plunking around with this.  I tried what may be a brute force
method: change the permissions of /dev/ttyS14.  But /dev/ttyS14 is a link to
/dev/tts/14.  I now see that is a devfs rendering?  I thought I do not have
support for devfs, and I am trying to use something  else.

Anyway, is it possible my problems are related to this issue?

I see that the "Cannot open /dev/ttyS14: device or resource busy" message is
a common one.  And there are almost as many proposed solutions as there are
instances.  There surely would be an easy way to do such a simple thing?
Nothing works for me.

Alan Davis


On 11/28/05, Dale <dalek@exceedtech.net> wrote:
>
> John J. Foster wrote:
>
> >On Sat, Nov 26, 2005 at 10:20:15PM -0600, Dale wrote:
> >
> >
> >>Now wvdial, it dials out, then sits for a minute, then disconnects with
> >>the error that my password is wrong, which is crap because it is
> >>correct.  I only got wvdial to work once on another rig.  It has never
> >>worked on this one though.  Anybody have a clue on that one?  I just
> >>like to have options in case it pours instead of just a little shower.
> >>
> >>
> >
> >Hi Dale - I had the same problem until I set
> >
> >Stupid Mode=yes in /etc/wvdial.conf. All was fine then.
> >
> >John
> >
> >
> Thanks for that tip.  I'll try that.  I like to have as many back-ups as
> I can get.  If it were not for bad luck, I would have no luck at all.
> Well, there is the exception of my girlfriend.  She is the best thing,
> person, to happen yet.
>
> Dale
> :-)
>
> --
> To err is human, I'm most certainly human.
>
>
>
> --
> gentoo-user@gentoo.org mailing list
>
>

[-- Attachment #2: Type: text/html, Size: 2256 bytes --]

Re: [gentoo-user] wvdial: dialup for users

[Alan E. Davis]

[-- Attachment #1: Type: text/plain, Size: 2248 bytes --]

Ok: success!  After changing the permissions a a BUNCH of files, and
ownerships, and even generating new groups (ppp), finally, when I changed
the ownership of /etc/wvdial to root:dialout, the setup works!

Isn't that always the way?   When I finally have posted and given up, a new
option occurs to me that works!

Thank you to everyone who made suggestions.

Alan Davis

On 11/28/05, Alan E. Davis <lngndvs@gmail.com> wrote:
>
> I've been plunking around with this.  I tried what may be a brute force
> method: change the permissions of /dev/ttyS14.  But /dev/ttyS14 is a link to
> /dev/tts/14.  I now see that is a devfs rendering?  I thought I do not have
> support for devfs, and I am trying to use something  else.
>
> Anyway, is it possible my problems are related to this issue?
>
> I see that the "Cannot open /dev/ttyS14: device or resource busy" message
> is a common one.  And there are almost as many proposed solutions as there
> are instances.  There surely would be an easy way to do such a simple
> thing?   Nothing works for me.
>
> Alan Davis
>
>
> On 11/28/05, Dale <dalek@exceedtech.net> wrote:
> >
> > John J. Foster wrote:
> >
> > >On Sat, Nov 26, 2005 at 10:20:15PM -0600, Dale wrote:
> > >
> > >
> > >>Now wvdial, it dials out, then sits for a minute, then disconnects
> > with
> > >>the error that my password is wrong, which is crap because it is
> > >>correct.  I only got wvdial to work once on another rig.  It has never
> > >>worked on this one though.  Anybody have a clue on that one?  I just
> > >>like to have options in case it pours instead of just a little shower.
> >
> > >>
> > >>
> > >
> > >Hi Dale - I had the same problem until I set
> > >
> > >Stupid Mode=yes in /etc/wvdial.conf. All was fine then.
> > >
> > >John
> > >
> > >
> > Thanks for that tip.  I'll try that.  I like to have as many back-ups as
> >
> > I can get.  If it were not for bad luck, I would have no luck at all.
> > Well, there is the exception of my girlfriend.  She is the best thing,
> > person, to happen yet.
> >
> > Dale
> > :-)
> >
> > --
> > To err is human, I'm most certainly human.
> >
> >
> >
> > --
> > gentoo-user@gentoo.org mailing list
> >
> >
>

[-- Attachment #2: Type: text/html, Size: 3236 bytes --]

Re: [gentoo-user] wvdial: dialup for users

[Alan E. Davis]

[-- Attachment #1: Type: text/plain, Size: 3564 bytes --]

Followup:

Oh, it work, ok...  until I rebooted.  Then it didn't work for ordinary
(non-super users) to #wvdial anymore.

Apparently, using udev and sysfs, etc., the devices are made on boot.
Funny, that I had to run MAKEDEV to make the higher numbered nodes, like
/dev/ttyS14, where my modem resides.  (The modem is not at this place on one
of the other systems I was playing around with---Knoppix, I think).

I am now going to learn udev.  I want to anyway: I like the way Ubuntu jumps
into action when a flash drive or a printer is plugged in, and so do my
GNU/Linux doubting friends :-).

So far, it looks like rules for creating the device nodes include
permissions components.

I will get there eventually.  Does anyone know, right off hand, though, how
to produce a rule to set up /dev/ttyS14 (/dev/tts/14 in the new
nomenclature) with permissions to allow dialup by anyone in group dialout?
It works to just do the following after booting:
      # chmod o+rw /dev/tts
      # chmod 0+rw /dev/tts/14

Is this a security issue?

Thanks for the advices so far.

Alan Davis

On 11/28/05, Alan E. Davis <lngndvs@gmail.com> wrote:
>
> Ok: success!  After changing the permissions a a BUNCH of files, and
> ownerships, and even generating new groups (ppp), finally, when I changed
> the ownership of /etc/wvdial to root:dialout, the setup works!
>
> Isn't that always the way?   When I finally have posted and given up, a
> new option occurs to me that works!
>
> Thank you to everyone who made suggestions.
>
> Alan Davis
>
> On 11/28/05, Alan E. Davis <lngndvs@gmail.com> wrote:
> >
> > I've been plunking around with this.  I tried what may be a brute force
> > method: change the permissions of /dev/ttyS14.  But /dev/ttyS14 is a link to
> > /dev/tts/14.  I now see that is a devfs rendering?  I thought I do not have
> > support for devfs, and I am trying to use something  else.
> >
> > Anyway, is it possible my problems are related to this issue?
> >
> > I see that the "Cannot open /dev/ttyS14: device or resource busy"
> > message is a common one.  And there are almost as many proposed solutions as
> > there are instances.  There surely would be an easy way to do such a simple
> > thing?   Nothing works for me.
> >
> > Alan Davis
> >
> >
> > On 11/28/05, Dale <dalek@exceedtech.net > wrote:
> > >
> > > John J. Foster wrote:
> > >
> > > >On Sat, Nov 26, 2005 at 10:20:15PM -0600, Dale wrote:
> > > >
> > > >
> > > >>Now wvdial, it dials out, then sits for a minute, then disconnects
> > > with
> > > >>the error that my password is wrong, which is crap because it is
> > > >>correct.  I only got wvdial to work once on another rig.  It has
> > > never
> > > >>worked on this one though.  Anybody have a clue on that one?  I just
> > > >>like to have options in case it pours instead of just a little
> > > shower.
> > > >>
> > > >>
> > > >
> > > >Hi Dale - I had the same problem until I set
> > > >
> > > >Stupid Mode=yes in /etc/wvdial.conf. All was fine then.
> > > >
> > > >John
> > > >
> > > >
> > > Thanks for that tip.  I'll try that.  I like to have as many back-ups
> > > as
> > > I can get.  If it were not for bad luck, I would have no luck at all.
> > > Well, there is the exception of my girlfriend.  She is the best thing,
> > > person, to happen yet.
> > >
> > > Dale
> > > :-)
> > >
> > > --
> > > To err is human, I'm most certainly human.
> > >
> > >
> > >
> > > --
> > > gentoo-user@gentoo.org mailing list
> > >
> > >
> >
>

[-- Attachment #2: Type: text/html, Size: 4972 bytes --]