AW: [gentoo-user] ERROR: x11-base/xorg-server-1.0.2-r7 failed.

AW: [gentoo-user] ERROR: x11-base/xorg-server-1.0.2-r7 failed.

[Noack, Sebastian]

> I have some trouble with emerging x11-base/xorg-x11. I tried to run
> emerge -avD x11-base/xorg-x11

-D affects only something if you pass also -u.

> !!! ERROR: x11-base/xorg-server-1.0.2-r7 failed.
> Call stack:
>   ebuild.sh, line 1539:   Called dyn_compile
>   ebuild.sh, line 939:   Called src_compile
>   ebuild.sh, line 1248:   Called x-modular_src_compile
>   x-modular.eclass, line 330:   Called x-modular_src_make
>   x-modular.eclass, line 325:   Called die
> 
> !!! emake failed
> !!! If you need support, post the topmost build error, and the call
> stack if relevant.

There are also error messages from the compiler?

> Any ideas what to do? If so, please consider me a gentoo-dummie. At
> the moment I do not have installed any x11-base/xorg-x11. My old
> version (6.9) blocked my system update (emerge -avuD system). That's
> why I thoght it might be a good idea to deinstall it, update the
> system and then reinstall the new version. Maybe it wasn't such a good
> idea...

Updating xorg is seldom a good idea if you need a working system. ;)

Regards
Sebastian Noack

-- 
gentoo-user@gentoo.org mailing list

AW: [gentoo-user] ERROR: x11-base/xorg-server-1.0.2-r7 failed.

[Noack, Sebastian]

> On 8/8/06, Julia Fischer <grottenolm@gmail.com> wrote:
> > Here everythin from the first compiler error:
> >
> > glxcmds.c: In function `__glXBindSwapBarrierSGIX':
> > glxcmds.c:1749: warning: cast to pointer from integer of different
size
> > glxcmds.c: In function `__glxQueryHyperpipeNetworkSGIX':
> > glxcmds.c:1796: error: `xGLXQueryHyperpipeNetworkSGIXReq' undeclared
> > (first use in this function)
> > glxcmds.c:1796: error: (Each undeclared identifier is reported only
once
> > glxcmds.c:1796: error: for each function it appears in.)
> > glxcmds.c:1796: error: `req' undeclared (first use in this function)
> > glxcmds.c:1796: error: syntax error before ')' token
> 
> Hmm, are you using  proprietary drivers and their implementation of
> opengl?  If so, try doing an "eselect opengl set xorg-x11", merge
> xorg-x11, then eselect opengl back to whatever you want.
> 
> -Richard

I don't think that this is the problem, because of the driver in any
case become linked against xorg and not vice-versa and the error occurs
when she tries to compile x11-base/xorg-server.

But I remember that also I had weird problems when I was upgrading from
xorg-6.9 to xorg-7.0, which occurs because of suddenly some files of the
partial xorg-packages were missing even though the package was emerged.
Re-emerging of the corresponding packages was the solution. If you van't
vfigure out which packages are affected it would be the best to run
`emerge -e xorg-x11`

Regards
Sebastian Noack

-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] ERROR: x11-base/xorg-server-1.0.2-r7 failed.

[Julia Fischer]

Opengl was already set to xorg-x11. I didn't try the emerge -e
xorg-x11 because I needed a running system today. I installed kubuntu.
Thanks anyway!

grottenolm.

2006/8/9, Noack, Sebastian <S.Noack@autoonline.de>:
> > On 8/8/06, Julia Fischer <grottenolm@gmail.com> wrote:
> > > Here everythin from the first compiler error:
> > >
> > > glxcmds.c: In function `__glXBindSwapBarrierSGIX':
> > > glxcmds.c:1749: warning: cast to pointer from integer of different
> size
> > > glxcmds.c: In function `__glxQueryHyperpipeNetworkSGIX':
> > > glxcmds.c:1796: error: `xGLXQueryHyperpipeNetworkSGIXReq' undeclared
> > > (first use in this function)
> > > glxcmds.c:1796: error: (Each undeclared identifier is reported only
> once
> > > glxcmds.c:1796: error: for each function it appears in.)
> > > glxcmds.c:1796: error: `req' undeclared (first use in this function)
> > > glxcmds.c:1796: error: syntax error before ')' token
> >
> > Hmm, are you using  proprietary drivers and their implementation of
> > opengl?  If so, try doing an "eselect opengl set xorg-x11", merge
> > xorg-x11, then eselect opengl back to whatever you want.
> >
> > -Richard
>
> I don't think that this is the problem, because of the driver in any
> case become linked against xorg and not vice-versa and the error occurs
> when she tries to compile x11-base/xorg-server.
>
> But I remember that also I had weird problems when I was upgrading from
> xorg-6.9 to xorg-7.0, which occurs because of suddenly some files of the
> partial xorg-packages were missing even though the package was emerged.
> Re-emerging of the corresponding packages was the solution. If you van't
> vfigure out which packages are affected it would be the best to run
> `emerge -e xorg-x11`
>
> Regards
> Sebastian Noack
>
> --
> gentoo-user@gentoo.org mailing list
>
>


-- 
________________________________________________________________
Julia Fischer

Schlachthausstr. 30         Lange Zeile 26
72074 Tübingen              96120 Bischberg

telefon: 07071-888366
mobil: 0179-2124791
email: grottenolm@gmail.com
PGP-fingerprint: CDDF 5522 D028 EA47 166A  0CC7 E273 8EC2 57D2 A9FA

-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] ERROR: x11-base/xorg-server-1.0.2-r7 failed.

[Dale]

Julia Fischer wrote:
> Opengl was already set to xorg-x11. I didn't try the emerge -e
> xorg-x11 because I needed a running system today. I installed kubuntu.
> Thanks anyway!
>
> grottenolm.
>>
>> I don't think that this is the problem, because of the driver in any
>> case become linked against xorg and not vice-versa and the error occurs
>> when she tries to compile x11-base/xorg-server.
>>
>> But I remember that also I had weird problems when I was upgrading from
>> xorg-6.9 to xorg-7.0, which occurs because of suddenly some files of the
>> partial xorg-packages were missing even though the package was emerged.
>> Re-emerging of the corresponding packages was the solution. If you van't
>> vfigure out which packages are affected it would be the best to run
>> `emerge -e xorg-x11`
>>
>> Regards
>> Sebastian Noack
>>
>> -- 
>> gentoo-user@gentoo.org mailing list
>>
>>

I ran into the same thing and I had to do a emerge -e world to get mine
working.  I wish I knew which package(s) needed to be remerged but I
have no clue.  I think it was a KDE one though.  It was working long
before the emerge finished.

Funny thing is, this only seemed to affect a few people, me included of
course.

Dale

:-)  :-)
-- 
gentoo-user@gentoo.org mailing list

AW: [gentoo-user] ERROR: x11-base/xorg-server-1.0.2-r7 failed.

[Noack, Sebastian]

> Julia Fischer wrote:
> > Opengl was already set to xorg-x11. I didn't try the emerge -e
> > xorg-x11 because I needed a running system today. I installed
kubuntu.
> > Thanks anyway!
> >
> > grottenolm.
> >>
> >> I don't think that this is the problem, because of the driver in
any
> >> case become linked against xorg and not vice-versa and the error
occurs
> >> when she tries to compile x11-base/xorg-server.
> >>
> >> But I remember that also I had weird problems when I was upgrading
from
> >> xorg-6.9 to xorg-7.0, which occurs because of suddenly some files
of
> the
> >> partial xorg-packages were missing even though the package was
emerged.
> >> Re-emerging of the corresponding packages was the solution. If you
> van't
> >> vfigure out which packages are affected it would be the best to run
> >> `emerge -e xorg-x11`
> >>
> >> Regards
> >> Sebastian Noack
> >>
> >> --
> >> gentoo-user@gentoo.org mailing list
> >>
> >>
> 
> I ran into the same thing and I had to do a emerge -e world to get
mine
> working.  I wish I knew which package(s) needed to be remerged but I
> have no clue.  I think it was a KDE one though.  It was working long
> before the emerge finished.
> 
> Funny thing is, this only seemed to affect a few people, me included
of
> course.
> 
> Dale

I don't think that this have to do anything with kde, because of this
error occurs during compiling xorg-server and kde is just a bundle of
apps running on X.

Actually I didn't do `emerge -e xorg-x11` or even `emerge -e world`,
when I had problems to upgrade xorg. Instead of, I redirect the output
of `emerge -ep xorg-x11` into a temporary file, and re-emerged only the
x-related packages from this file. This would safe a lot of time.

But maybe you and Julia, should look first at the bug, which Richard
mentioned.

> But in fact, Julia's problem seems to be this bug:
> 
> http://bugs.gentoo.org/show_bug.cgi?id=138766

Regards
Sebastian Noack

-- 
gentoo-user@gentoo.org mailing list