AW: [gentoo-user] ERROR: x11-base/xorg-server-1.0.2-r7 failed.

AW: [gentoo-user] ERROR: x11-base/xorg-server-1.0.2-r7 failed.

[Noack, Sebastian]

> I have some trouble with emerging x11-base/xorg-x11. I tried to run
> emerge -avD x11-base/xorg-x11

-D affects only something if you pass also -u.

> !!! ERROR: x11-base/xorg-server-1.0.2-r7 failed.
> Call stack:
>   ebuild.sh, line 1539:   Called dyn_compile
>   ebuild.sh, line 939:   Called src_compile
>   ebuild.sh, line 1248:   Called x-modular_src_compile
>   x-modular.eclass, line 330:   Called x-modular_src_make
>   x-modular.eclass, line 325:   Called die
> 
> !!! emake failed
> !!! If you need support, post the topmost build error, and the call
> stack if relevant.

There are also error messages from the compiler?

> Any ideas what to do? If so, please consider me a gentoo-dummie. At
> the moment I do not have installed any x11-base/xorg-x11. My old
> version (6.9) blocked my system update (emerge -avuD system). That's
> why I thoght it might be a good idea to deinstall it, update the
> system and then reinstall the new version. Maybe it wasn't such a good
> idea...

Updating xorg is seldom a good idea if you need a working system. ;)

Regards
Sebastian Noack

-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] ERROR: x11-base/xorg-server-1.0.2-r7 failed.

[Julia Fischer]

2006/8/8, Noack, Sebastian <S.Noack@autoonline.de>:
> > I have some trouble with emerging x11-base/xorg-x11. I tried to run
> > emerge -avD x11-base/xorg-x11
>
> -D affects only something if you pass also -u.
I get the same when I call emerge -auD x11-base/xorg-x11, which was
what I intended.
>
> > !!! ERROR: x11-base/xorg-server-1.0.2-r7 failed.
> > Call stack:
> >   ebuild.sh, line 1539:   Called dyn_compile
> >   ebuild.sh, line 939:   Called src_compile
> >   ebuild.sh, line 1248:   Called x-modular_src_compile
> >   x-modular.eclass, line 330:   Called x-modular_src_make
> >   x-modular.eclass, line 325:   Called die
> >
> > !!! emake failed
> > !!! If you need support, post the topmost build error, and the call
> > stack if relevant.
>
> There are also error messages from the compiler?
Here everythin from the first compiler error:

glxcmds.c: In function `__glXBindSwapBarrierSGIX':
glxcmds.c:1749: warning: cast to pointer from integer of different size
glxcmds.c: In function `__glxQueryHyperpipeNetworkSGIX':
glxcmds.c:1796: error: `xGLXQueryHyperpipeNetworkSGIXReq' undeclared
(first use in this function)
glxcmds.c:1796: error: (Each undeclared identifier is reported only once
glxcmds.c:1796: error: for each function it appears in.)
glxcmds.c:1796: error: `req' undeclared (first use in this function)
glxcmds.c:1796: error: syntax error before ')' token
glxcmds.c:1797: error: `xGLXQueryHyperpipeNetworkSGIXReply' undeclared
(first use in this function)
glxcmds.c:1812: error: `reply' undeclared (first use in this function)
glxcmds.c:1825: error: `sz_xGLXQueryHyperpipeNetworkSGIXReply'
undeclared (first use in this function)
glxcmds.c: In function `__glxDestroyHyperpipeConfigSGIX':
glxcmds.c:1836: error: `xGLXDestroyHyperpipeConfigSGIXReq' undeclared
(first use in this function)
glxcmds.c:1836: error: `req' undeclared (first use in this function)
glxcmds.c:1837: error: syntax error before ')' token
glxcmds.c:1838: error: `xGLXDestroyHyperpipeConfigSGIXReply'
undeclared (first use in this function)
glxcmds.c:1851: error: `reply' undeclared (first use in this function)
glxcmds.c:1863: error: `sz_xGLXDestroyHyperpipeConfigSGIXReply'
undeclared (first use in this function)
glxcmds.c: In function `__glxQueryHyperpipeConfigSGIX':
glxcmds.c:1871: error: `xGLXQueryHyperpipeConfigSGIXReq' undeclared
(first use in this function)
glxcmds.c:1871: error: `req' undeclared (first use in this function)
glxcmds.c:1872: error: syntax error before ')' token
glxcmds.c:1873: error: `xGLXQueryHyperpipeConfigSGIXReply' undeclared
(first use in this function)
glxcmds.c:1889: error: `reply' undeclared (first use in this function)
glxcmds.c:1904: error: `sz_xGLXQueryHyperpipeConfigSGIXReply'
undeclared (first use in this function)
glxcmds.c: In function `__glxHyperpipeConfigSGIX':
glxcmds.c:1915: error: `xGLXHyperpipeConfigSGIXReq' undeclared (first
use in this function)
glxcmds.c:1915: error: `req' undeclared (first use in this function)
glxcmds.c:1916: error: syntax error before ')' token
glxcmds.c:1917: error: `xGLXHyperpipeConfigSGIXReply' undeclared
(first use in this function)
glxcmds.c:1935: error: `reply' undeclared (first use in this function)
glxcmds.c:1949: error: `sz_xGLXHyperpipeConfigSGIXReply' undeclared
(first use in this function)
make[2]: *** [glxcmds.lo] Error 1
make[2]: *** Waiting for unfinished jobs....
 x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../../include
-I../../include -I../../include -I../../include -I../../include
-I../../include -I../../GL/include -I../../hw/xfree86/os-support
-DHAVE_DIX_CONFIG_H
-I/var/tmp/portage/xorg-server-1.0.2-r7/work/Mesa-6.4.2/include
-DXFree86Server -DIN_MODULE -DXFree86Module -DXFree86LOADER -Wall
-Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes
-Wmissing-declarations -Wnested-externs -fno-strict-aliasing
-D_BSD_SOURCE -DHAS_FCHOWN -DHAS_STICKY_DIR_BIT -I../../include
-I../../include -I../../Xext -I../../composite -I../../damageext
-I../../xfixes -I../../Xi -I../../mi -I../../miext/shadow
-I../../miext/damage -I../../render -I../../randr -I../../fb
-I../../lbx -march=k8 -O2 -pipe -MT glxcmdsswap.lo -MD -MP -MF
.deps/glxcmdsswap.Tpo -c glxcmdsswap.c  -fPIC -DPIC -o
.libs/glxcmdsswap.o
make[2]: Leaving directory
`/var/tmp/portage/xorg-server-1.0.2-r7/work/xorg-server-1.0.2/GL/glx'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory
`/var/tmp/portage/xorg-server-1.0.2-r7/work/xorg-server-1.0.2/GL'
make: *** [all-recursive] Error 1

!!! ERROR: x11-base/xorg-server-1.0.2-r7 failed.
Call stack:
  ebuild.sh, line 1539:   Called dyn_compile
  ebuild.sh, line 939:   Called src_compile
  ebuild.sh, line 1248:   Called x-modular_src_compile
  x-modular.eclass, line 330:   Called x-modular_src_make
  x-modular.eclass, line 325:   Called die

!!! emake failed
!!! If you need support, post the topmost build error, and the call
stack if relevant.


>
> > Any ideas what to do? If so, please consider me a gentoo-dummie. At
> > the moment I do not have installed any x11-base/xorg-x11. My old
> > version (6.9) blocked my system update (emerge -avuD system). That's
> > why I thoght it might be a good idea to deinstall it, update the
> > system and then reinstall the new version. Maybe it wasn't such a good
> > idea...
>
> Updating xorg is seldom a good idea if you need a working system. ;)
Too late now...
>
> Regards
> Sebastian Noack
Thanks, grottenolm.
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] ERROR: x11-base/xorg-server-1.0.2-r7 failed.

[Richard Fish]

On 8/8/06, Julia Fischer <grottenolm@gmail.com> wrote:
> Here everythin from the first compiler error:
>
> glxcmds.c: In function `__glXBindSwapBarrierSGIX':
> glxcmds.c:1749: warning: cast to pointer from integer of different size
> glxcmds.c: In function `__glxQueryHyperpipeNetworkSGIX':
> glxcmds.c:1796: error: `xGLXQueryHyperpipeNetworkSGIXReq' undeclared
> (first use in this function)
> glxcmds.c:1796: error: (Each undeclared identifier is reported only once
> glxcmds.c:1796: error: for each function it appears in.)
> glxcmds.c:1796: error: `req' undeclared (first use in this function)
> glxcmds.c:1796: error: syntax error before ')' token

Hmm, are you using  proprietary drivers and their implementation of
opengl?  If so, try doing an "eselect opengl set xorg-x11", merge
xorg-x11, then eselect opengl back to whatever you want.

-Richard
-- 
gentoo-user@gentoo.org mailing list

AW: [gentoo-user] ERROR: x11-base/xorg-server-1.0.2-r7 failed.

[Noack, Sebastian]

> On 8/8/06, Julia Fischer <grottenolm@gmail.com> wrote:
> > Here everythin from the first compiler error:
> >
> > glxcmds.c: In function `__glXBindSwapBarrierSGIX':
> > glxcmds.c:1749: warning: cast to pointer from integer of different
size
> > glxcmds.c: In function `__glxQueryHyperpipeNetworkSGIX':
> > glxcmds.c:1796: error: `xGLXQueryHyperpipeNetworkSGIXReq' undeclared
> > (first use in this function)
> > glxcmds.c:1796: error: (Each undeclared identifier is reported only
once
> > glxcmds.c:1796: error: for each function it appears in.)
> > glxcmds.c:1796: error: `req' undeclared (first use in this function)
> > glxcmds.c:1796: error: syntax error before ')' token
> 
> Hmm, are you using  proprietary drivers and their implementation of
> opengl?  If so, try doing an "eselect opengl set xorg-x11", merge
> xorg-x11, then eselect opengl back to whatever you want.
> 
> -Richard

I don't think that this is the problem, because of the driver in any
case become linked against xorg and not vice-versa and the error occurs
when she tries to compile x11-base/xorg-server.

But I remember that also I had weird problems when I was upgrading from
xorg-6.9 to xorg-7.0, which occurs because of suddenly some files of the
partial xorg-packages were missing even though the package was emerged.
Re-emerging of the corresponding packages was the solution. If you van't
vfigure out which packages are affected it would be the best to run
`emerge -e xorg-x11`

Regards
Sebastian Noack

-- 
gentoo-user@gentoo.org mailing list

AW: [gentoo-user] ERROR: x11-base/xorg-server-1.0.2-r7 failed.

[Noack, Sebastian]

> Julia Fischer wrote:
> > Opengl was already set to xorg-x11. I didn't try the emerge -e
> > xorg-x11 because I needed a running system today. I installed
kubuntu.
> > Thanks anyway!
> >
> > grottenolm.
> >>
> >> I don't think that this is the problem, because of the driver in
any
> >> case become linked against xorg and not vice-versa and the error
occurs
> >> when she tries to compile x11-base/xorg-server.
> >>
> >> But I remember that also I had weird problems when I was upgrading
from
> >> xorg-6.9 to xorg-7.0, which occurs because of suddenly some files
of
> the
> >> partial xorg-packages were missing even though the package was
emerged.
> >> Re-emerging of the corresponding packages was the solution. If you
> van't
> >> vfigure out which packages are affected it would be the best to run
> >> `emerge -e xorg-x11`
> >>
> >> Regards
> >> Sebastian Noack
> >>
> >> --
> >> gentoo-user@gentoo.org mailing list
> >>
> >>
> 
> I ran into the same thing and I had to do a emerge -e world to get
mine
> working.  I wish I knew which package(s) needed to be remerged but I
> have no clue.  I think it was a KDE one though.  It was working long
> before the emerge finished.
> 
> Funny thing is, this only seemed to affect a few people, me included
of
> course.
> 
> Dale

I don't think that this have to do anything with kde, because of this
error occurs during compiling xorg-server and kde is just a bundle of
apps running on X.

Actually I didn't do `emerge -e xorg-x11` or even `emerge -e world`,
when I had problems to upgrade xorg. Instead of, I redirect the output
of `emerge -ep xorg-x11` into a temporary file, and re-emerged only the
x-related packages from this file. This would safe a lot of time.

But maybe you and Julia, should look first at the bug, which Richard
mentioned.

> But in fact, Julia's problem seems to be this bug:
> 
> http://bugs.gentoo.org/show_bug.cgi?id=138766

Regards
Sebastian Noack

-- 
gentoo-user@gentoo.org mailing list