* [gentoo-user] ATI X800 - no opengl + logout problem
@ 2006-11-20 19:51 Radoslaw Grzanka
2006-11-20 20:20 ` Richard Fish
` (2 more replies)
0 siblings, 3 replies; 10+ messages in thread
From: Radoslaw Grzanka @ 2006-11-20 19:51 UTC (permalink / raw
To: gentoo-user
Dear list members,
I am struggling with ati-drivers for ATI X800 card. I have followed
every HOWTO I could find through google but still no luck. The video
card I have is ATI X800 GTO. Here goes relevant lspci output:
tygrysek radekg # lspci
...
05:00.0 VGA compatible controller: ATI Technologies Inc R480 [Radeon
X800 GTO (PCIE)]
05:00.1 Display controller: ATI Technologies Inc R480 [Radeon X800 GTO
(PCIE)] (Secondary)
The problem I'm having is no opengl - fglrxinfo output:
tygrysek radekg # /opt/ati/bin/fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.5.1)
and problem with switching (or in fact logging out from X) to text
console.. basically my computer hangs and turns off my monitor (Note. It
HANGS. There are some reports that says that simply monitor is blank -
this is not the case).
I've got AMD64 box but I do not know whether this is amd64 specific
problem so I am posting to general user group.
If anybody is able to help me I would be grateful.
Now comes the long part:
My xorg.conf (I have cut out some comments. Mind you that this is my
current setup, I have tried several other configurations):
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
# Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"
# This loads the GLX module
Load "glx"
# This loads the DRI module
Load "dri"
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
FontPath "/usr/share/fonts/misc/"
# FontPath "/usr/share/fonts/TTF/"
# FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
# FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "pl"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2" # IntelliMouse PS/2
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
Section "Monitor"
Identifier "P19"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 79.0
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-100
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "ATI 850B"
Driver "fglrx"
### generic DRI settings ###
# === disable PnP Monitor ===
Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper,
driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
Option "DesktopSetup" "horizontal"
Option "ScreenOverlap" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
Option "CapabilitiesEx" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
BusID "PCI:5:0:0" # no device found at config time
Screen 0
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "ATI 850B"
Monitor "P19"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1280x1024"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
# Option "AIGLX" "true"
EndSection
Section "DRI"
Mode 0666
EndSection
My Xorg.log is:
X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: UNKNOWN
Current Operating System: Linux tygrysek 2.6.18-gentoo-r2 #2 PREEMPT Sun
Nov 19 22:43:32 CET 2006 x86_64
Build Date: 16 November 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 20 20:33:43 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "P19"
(**) | |-->Device "ATI 850B"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib64/xorg/modules"
(**) Extension "Composite" is disabled
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.0
X.Org XInput driver : 0.6
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib64/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib64/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,005e card 1462,7125 rev a3 class 05,80,00
hdr 00
(II) PCI: 00:01:0: chip 10de,0050 card 1462,7125 rev a3 class 06,01,00
hdr 80
(II) PCI: 00:01:1: chip 10de,0052 card 1462,7125 rev a2 class 0c,05,00
hdr 80
(II) PCI: 00:02:0: chip 10de,005a card 1462,7125 rev a2 class 0c,03,10
hdr 80
(II) PCI: 00:02:1: chip 10de,005b card 1462,7125 rev a3 class 0c,03,20
hdr 80
(II) PCI: 00:04:0: chip 10de,0059 card 1462,7585 rev a2 class 04,01,00
hdr 00
(II) PCI: 00:06:0: chip 10de,0053 card 1462,7125 rev f2 class 01,01,8a
hdr 00
(II) PCI: 00:09:0: chip 10de,005c card 0000,0000 rev a2 class 06,04,01
hdr 01
(II) PCI: 00:0a:0: chip 10de,0057 card 1462,7125 rev a3 class 06,80,00
hdr 00
(II) PCI: 00:0b:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00
hdr 01
(II) PCI: 00:0c:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00
hdr 01
(II) PCI: 00:0d:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00
hdr 01
(II) PCI: 00:0e:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00
hdr 01
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00
hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00
hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00
hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00
hdr 80
(II) PCI: 01:0c:0: chip 1106,3044 card 0574,086c rev 80 class 0c,00,10
hdr 00
(II) PCI: 05:00:0: chip 1002,5d4f card 1002,0302 rev 00 class 03,00,00
hdr 80
(II) PCI: 05:00:1: chip 1002,5d6f card 1002,0303 rev 00 class 03,80,00
hdr 00
(II) PCI: End of PCI scan
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:9:0), (0,1,1), BCTRL: 0x0204 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[1] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[2] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[3] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfde00000 - 0xfdefffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xfdf00000 - 0xfdffffff (0x100000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:11:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is
cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]
[1] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[2] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[3] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xfdd00000 - 0xfddfffff (0x100000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xfdc00000 - 0xfdcfffff (0x100000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:12:0), (0,3,3), BCTRL: 0x0004 (VGA_EN is
cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[1] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[2] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[B]
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xfdb00000 - 0xfdbfffff (0x100000) MX[B]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0xfda00000 - 0xfdafffff (0x100000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:13:0), (0,4,4), BCTRL: 0x0004 (VGA_EN is
cleared)
(II) Bus 4 I/O range:
[0] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[1] -1 0 0x00009400 - 0x000094ff (0x100) IX[B]
[2] -1 0 0x00009800 - 0x000098ff (0x100) IX[B]
[3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[B]
(II) Bus 4 non-prefetchable memory range:
[0] -1 0 0xfd900000 - 0xfd9fffff (0x100000) MX[B]
(II) Bus 4 prefetchable memory range:
[0] -1 0 0xfd800000 - 0xfd8fffff (0x100000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 5: bridge is at (0:14:0), (0,5,5), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 5 I/O range:
[0] -1 0 0x00008000 - 0x000080ff (0x100) IX[B]
[1] -1 0 0x00008400 - 0x000084ff (0x100) IX[B]
[2] -1 0 0x00008800 - 0x000088ff (0x100) IX[B]
[3] -1 0 0x00008c00 - 0x00008cff (0x100) IX[B]
(II) Bus 5 non-prefetchable memory range:
[0] -1 0 0xfd700000 - 0xfd7fffff (0x100000) MX[B]
(II) Bus 5 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B]
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:24:0), (0,0,5), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(--) PCI:*(5:0:0) ATI Technologies Inc R480 [Radeon X800 GTO (PCIE)] rev
0, Mem @ 0xd0000000/28, 0xfd7f0000/16, I/O @ 0x8c00/8
(--) PCI: (5:0:1) ATI Technologies Inc R480 [Radeon X800 GTO (PCIE)]
(Secondary) rev 0, Mem @ 0xfd7e0000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xfdeff000 - 0xfdeff7ff (0x800) MX[B]
[1] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[B]
[2] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[B]
[3] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[B]
[4] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[B]
[5] -1 0 0xfd7e0000 - 0xfd7effff (0x10000) MX[B](B)
[6] -1 0 0xfd7f0000 - 0xfd7fffff (0x10000) MX[B](B)
[7] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[8] -1 0 0x0000cc00 - 0x0000cc7f (0x80) IX[B]
[9] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B]
[10] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
[11] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[12] -1 0 0x0000f000 - 0x0000f0ff (0x100) IX[B]
[13] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[B]
[14] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[B]
[15] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[B]
[16] -1 0 0x00008c00 - 0x00008cff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfdeff000 - 0xfdeff7ff (0x800) MX[B]
[1] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[B]
[2] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[B]
[3] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[B]
[4] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[B]
[5] -1 0 0xfd7e0000 - 0xfd7effff (0x10000) MX[B](B)
[6] -1 0 0xfd7f0000 - 0xfd7fffff (0x10000) MX[B](B)
[7] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[8] -1 0 0x0000cc00 - 0x0000cc7f (0x80) IX[B]
[9] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B]
[10] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
[11] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[12] -1 0 0x0000f000 - 0x0000f0ff (0x100) IX[B]
[13] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[B]
[14] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[B]
[15] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[B]
[16] -1 0 0x00008c00 - 0x00008cff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfdeff000 - 0xfdeff7ff (0x800) MX[B]
[5] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[B]
[6] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[B]
[7] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[B]
[8] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[B]
[9] -1 0 0xfd7e0000 - 0xfd7effff (0x10000) MX[B](B)
[10] -1 0 0xfd7f0000 - 0xfd7fffff (0x10000) MX[B](B)
[11] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000cc00 - 0x0000cc7f (0x80) IX[B]
[15] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B]
[16] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
[17] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[18] -1 0 0x0000f000 - 0x0000f0ff (0x100) IX[B]
[19] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[B]
[20] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[B]
[21] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[B]
[22] -1 0 0x00008c00 - 0x00008cff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib64/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.1.1, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib64/xorg/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.27.10
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib64/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "kbd"
(II) Loading /usr/lib64/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) ATI Radeon/FireGL: The following chipsets are supported:
RADEON 9000/9000 PRO (RV250 4966), RADEON 9000 LE (RV250 4967),
MOBILITY FireGL 9000 (M9 4C64), MOBILITY RADEON 9000 (M9 4C66),
RADEON 9000 PRO (D9 4C67), RADEON 9250 (RV280 5960),
RADEON 9250/9200 Series (RV280 5961),
RADEON 9250/9200 Series (RV280 5962),
RADEON 9250/9200 Series (RV280 5964), FireMV 2200 PCI (RV280 5965),
MOBILITY RADEON 9200 (M9+ 5C61), MOBILITY RADEON 9200 (M9+ 5C63),
FireGL 8800 (R200 5148), RADEON 8500 (R200 514C),
RADEON 9100 (R200 514D), RADEON 8500 AIW (R200 4242),
RADEON 9600 (RV350 4150), RADEON 9600 SE (RV350 4151),
RADEON 9600 PRO (RV360 4152), RADEON 9600 (RV350 4E51),
MOBILITY RADEON 9600/9700 (M10/M11 4E50),
MOBILITY RADEON 9500 (M11 4E52), MOBILITY RADEON 9550 (M12 4E56),
RADEON 9500 (R300 4144), RADEON 9600 TX (R300 4146),
FireGL Z1 (R300 4147), RADEON 9700 PRO (R300 4E44),
RADEON 9500 PRO/9700 (R300 4E45), RADEON 9600 TX (R300 4E46),
FireGL X1 (R300 4E47), RADEON 9800 SE (R350 4148),
RADEON 9500 (R350 4149), RADEON 9550 (RV350 4153),
FireGL T2 (RV350 4154), RADEON 9600 (RV351 4155),
RADEON 9800 PRO (R350 4E48), RADEON 9800 (R350 4E49),
RADEON 9800 XT (R360 4E4A), FireGL X2-256/X2-256t (R350 4E4B),
MOBILITY FireGL T2/T2e (M10/M11 4E54), RADEON X300/X550 (RV370 5B60),
RADEON X600 (RV380 5B62), RADEON X550 (RV370 5B63),
FireGL V3100 (RV370 5B64), FireMV 2200 (RV370 5B65),
MOBILITY RADEON X300 (M22 5460), MOBILITY RADEON X300 (M22 5461),
MOBILITY RADEON X600 SE (M24 5462), MOBILITY FireGL V3100 (M22 5464),
RADEON X600/X550 Series (RV380 3E50), FireGL V3200 (RV380 3E54),
MOBILITY RADEON X600 (M24 3150), MOBILITY RADEON X300 (M22 3152),
MOBILITY FireGL V3200 (M24 3154), RADEON X800 (R420 4A48),
RADEON X800 PRO (R420 4A49), RADEON X800 SE (R420 4A4A),
RADEON X800 XT (R420 4A4B), RADEON X800 (R420 4A4C),
FireGL X3-256 (R420 4A4D), MOBILITY RADEON 9800 (M18 4A4E),
RADEON X800 SE (R420 4A4F),
RADEON X800 XT Platinum Edition (R420 4A50),
RADEON X800 VE (R420 4A54), RADEON X800 (R423 5548),
RADEON X800 GTO (R423 5549),
RADEON X800 XT Platinum Edition (R423 554A),
RADEON X800 GT (R423 554B), RADEON X800 XT (R423 5D57),
FireGL V7100 (R423 5550), FireGL V5100 (R423 5551),
MOBILITY RADEON X800 XT (M28 5D48), MOBILITY FireGL V5100 (M28 5D49),
MOBILITY RADEON X800 (M28 5D4A), RADEON X800 XL (R430 554D),
RADEON X800 GT (R430 554E), RADEON X800 GTO (R430 554F),
RADEON X850 XT Platinum Edition (R480 5D4D),
RADEON X800 GTO (R480 5D4F), FireGL V7200 (R480 5D50),
RADEON X850 XT (R480 5D52), RADEON X850 (R481 4B48),
RADEON X850 XT (R481 4B49), RADEON X850 SE (R481 4B4A),
RADEON X850 PRO (R481 4B4B),
RADEON X850 XT Platinum Edition (R481 4B4C),
MOBILITY FireGL V5000 (M26 564A), MOBILITY FireGL V5000 (M26 564B),
FireGL V5000 (RV410 5E48), RADEON X700 XT (RV410 5E4A),
RADEON X700 PRO (RV410 5E4B), RADEON X700 SE (RV410 5E4C),
RADEON X700 (RV410 5E4D), RADEON X700/X550 Series (RV410 5E4F),
MOBILITY RADEON X700 (M26 5652), MOBILITY RADEON X700 (M26 5653),
MOBILITY RADEON X700 XL (M26-XC 564F),
RADEON 9000/9100 IGP Series (RS300 5834),
RADEON 9000 PRO/9100 PRO IGP (RS350 7834),
MOBILITY RADEON 9000 IGP (RL300MB 7835),
MOBILITY RADEON 9000/9100 IGP (RS300M 5835),
RADEON XPRESS 200 (RS400 5A41), RADEON XPRESS 200M (RS400 5A42),
RADEON XPRESS 200 (RS480 5954), RADEON XPRESS 200M (RS480 5955),
RADEON XPRESS 200 (RS482 5974), RADEON XPRESS 200M (RS482 5975),
RADEON XPRESS 200 (RC410 5A61), RADEON XPRESS 200M (RC410 5A62),
RADEON X1800 (R520 7100), MOBILITY RADEON X1800 XT (M58 7101),
MOBILITY RADEON X1800 (M58 7102), MOBILITY FireGL V7200 (M58 7103),
FireGL V7200 (R520 7104), FireGL V5300 (R520 7105),
MOBILITY FireGL V7100 (M58 7106), RADEON X1800 Series (R520 7108),
RADEON X1800 Series (R520 7109), RADEON X1800 Series (R520 710A),
RADEON X1800 Series (R520 710B), RADEON X1800 Series (R520 710C),
FireGL V7300 (R520 710E), FireGL V7350 (R520 710F),
RADEON X1300 PRO (RV505 7143), RADEON X1300 (RV505 7147),
MOBILITY RADEON X1300 (M52 714B), MOBILITY RADEON X1300 (M52 714C),
RADEON X1300 Series (RV505 715F), RADEON X1600 Series (RV515 7140),
RADEON X1300 Series (RV515 7142), MOBILITY FireGL (M54 GL 7144),
MOBILITY RADEON X1400 (M54 7145), RADEON X1300 Series (RV515 7146),
MOBILITY RADEON X1300 (M52 7149), MOBILITY RADEON X1300 (M52 714A),
RADEON X1300 Series (RV515 714D), RADEON X1300 Series (RV515 714E),
FireGL V3300 (RV515 7152), RADEON X1300 Series (RV515 715E),
FireStream 2U (R580 724E), FireStream 2U (R580 724F),
RADEON X1600 Series (RV530 71C0), RADEON X1600 Series (RV530 71C2),
MOBILITY FireGL V5200 (M56 71C4), MOBILITY RADEON X1600 (M56 71C5),
RADEON X1600 Series (RV530 LE 71C6),
RADEON X1600 Series (RV530 VE 71CE), FireGL V3400 (RV530 71D2),
FireGL V5200 (RV530 71DA), RADEON X1600 Series (RV530 SE 71DE),
RADEON X1900 (R580 7240), RADEON X1900 (R580 7243),
RADEON X1900 (R580 7244), RADEON X1900 (R580 7245),
RADEON X1900 (R580 7246), RADEON X1900 (R580 7247),
RADEON X1900 (R580 7248), RADEON X1900 (R580 7249),
RADEON X1900 (R580 724A), RADEON X1900 (R580 724B),
RADEON X1900 (R580 724C), RADEON X1900 (R580 724D)
(II) Primary Device is: PCI 05:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.27.10
(II) ATI Proprietary Linux Driver Release Identifier:
LGDr8.27g1
(II) ATI Proprietary Linux Driver Build Date: Jul 27 2006 22:01:09
(II) ATI Proprietary Linux Driver Build Information:
autobuild-rel-r6-8.27.1.1.2.3-driver-lnx-x86_64-282878
(WW) fglrx: No matching Device section for instance (BusID PCI:5:0:1) found
(--) Chipset RADEON X800 GTO (R480 5D4F) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfdeff000 - 0xfdeff7ff (0x800) MX[B]
[5] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[B]
[6] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[B]
[7] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[B]
[8] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[B]
[9] -1 0 0xfd7e0000 - 0xfd7effff (0x10000) MX[B](B)
[10] -1 0 0xfd7f0000 - 0xfd7fffff (0x10000) MX[B](B)
[11] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000cc00 - 0x0000cc7f (0x80) IX[B]
[15] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B]
[16] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
[17] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[18] -1 0 0x0000f000 - 0x0000f0ff (0x100) IX[B]
[19] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[B]
[20] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[B]
[21] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[B]
[22] -1 0 0x00008c00 - 0x00008cff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x6de950
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfdeff000 - 0xfdeff7ff (0x800) MX[B]
[5] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[B]
[6] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[B]
[7] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[B]
[8] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[B]
[9] -1 0 0xfd7e0000 - 0xfd7effff (0x10000) MX[B](B)
[10] -1 0 0xfd7f0000 - 0xfd7fffff (0x10000) MX[B](B)
[11] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000cc00 - 0x0000cc7f (0x80) IX[B]
[18] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B]
[19] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
[20] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[21] -1 0 0x0000f000 - 0x0000f0ff (0x100) IX[B]
[22] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[B]
[23] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[B]
[24] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[B]
[25] -1 0 0x00008c00 - 0x00008cff (0x100) IX[B](B)
[26] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[27] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib64/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(II) fglrx(0): PCI bus 5 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "NoAccel" "no"
(**) fglrx(0): Option "NoDRI" "no"
(**) fglrx(0): Option "Capabilities" "0x00000000"
(**) fglrx(0): Option "CapabilitiesEx" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionI" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionII" "0x00000000"
(**) fglrx(0): Option "OpenGLOverlay" "off"
(**) fglrx(0): Option "VideoOverlay" "on"
(**) fglrx(0): Option "DesktopSetup" "horizontal"
(**) fglrx(0): Option "ScreenOverlap" "0"
(**) fglrx(0): Option "UseInternalAGPGART" "yes"
(**) fglrx(0): Option "Stereo" "off"
(**) fglrx(0): Option "StereoSyncEnable" "1"
(**) fglrx(0): Option "UseFastTLS" "0"
(**) fglrx(0): Option "BlockSignalsOnLock" "on"
(**) fglrx(0): Option "ForceGenericCPU" "no"
(**) fglrx(0): Option "CenterMode" "off"
(**) fglrx(0): Option "FSAAScale" "1"
(**) fglrx(0): Option "FSAAEnable" "no"
(**) fglrx(0): Option "FSAADisableGamma" "no"
(**) fglrx(0): Option "FSAACustomizeMSPos" "no"
(**) fglrx(0): Option "FSAAMSPosX0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX5" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY5" "0.000000"
(**) fglrx(0): Option "PseudoColorVisuals" "off"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x00000000
(**) fglrx(0): Gamma Correction for II is 0x00000000
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib64/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(**) fglrx(0): Option "mtrr" "off"
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "RADEON X800 GTO (R480 5D4F)" (Chipset = 0x5d4f)
(--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x0302)
(--) fglrx(0): board vendor info: original ATI graphics adapter
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xfd7f0000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib64/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
ABI class: X.Org Video Driver, version 1.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 9.10
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: R480
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Reloading /usr/lib64/xorg/modules/linux/libdrm.so
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
[drm] failed to load kernel module "fglrx"
(WW) fglrx(0): Failed to open DRM connection
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR3
(II) fglrx(0): PCIE card detected
(II) fglrx(0): board/chipset is supported by this driver (original ATI
board)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib64/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(II) fglrx(0): Connected Display1: DFP on internal TMDS
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: FUS Model: 552 Serial#: 16843009
(II) fglrx(0): Year: 2005 Week: 29
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 38 vert.: 30
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end
1688 h_border: 0
(II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking:
1066 v_border: 0
(II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 82
kHz, PixClock max 140 MHz
(II) fglrx(0): Monitor name: P19-2
(II) fglrx(0): Serial No: YEHG810014
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Specified desktop setup not supported: 10
(II) fglrx(0): Primary Controller - DFP on internal TMDS
(II) fglrx(0): Internal Desktop Setting: 0x00000004
(II) fglrx(0): POWERplay version 3. 1 power state available:
(II) fglrx(0): 1. 398/493MHz @ 0Hz [enable load balancing]
(**) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(**) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(**) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 43 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 0)
(**) fglrx(0): *Mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6
kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024" 128.94 1280 1368 1504 1728 1024
1025 1028 1066 +hsync
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0
MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024
1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0
MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 85.51 1280 1344 1480 1680 1024
1025 1028 1083 interlace +hsync
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0
MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 77.80 1280 1344 1480 1680 1024
1025 1028 1077 interlace +hsync
(**) fglrx(0): Default mode "1280x720": 74.5 MHz (scaled from 0.0 MHz),
44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720" 74.48 1280 1336 1472 1664 720 721
724 746 +hsync +vsync
(**) fglrx(0): Default mode "1152x864": 119.7 MHz (scaled from 0.0
MHz), 77.1 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1152x864" 119.65 1152 1224 1352 1552 864 865
868 907 +hsync
(**) fglrx(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0
MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865
868 900
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz),
63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864" 96.77 1152 1224 1344 1536 864 865
868 900 +hsync
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz),
53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865
868 895 +hsync
(**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz),
43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 64.68 1152 1208 1328 1504 864 865
868 915 interlace +hsync
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz),
39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 58.29 1152 1200 1320 1488 864 865
868 911 interlace +hsync
(**) fglrx(0): Default mode "1024x768": 94.5 MHz (scaled from 0.0 MHz),
68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769
772 808
(**) fglrx(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz),
60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769
772 800
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz),
57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769
772 801 +hsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz),
56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771
777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz),
48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771
777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 44.9 MHz (scaled from 0.0 MHz),
35.5 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768
772 817 interlace
(**) fglrx(0): Default mode "1024x768": 100.2 MHz (scaled from 0.0
MHz), 72.8 kHz, 90.0 Hz
(II) fglrx(0): Modeline "1024x768" 100.19 1024 1088 1200 1376 768 769
772 809 +hsync
(**) fglrx(0): Default mode "960x720": 55.9 MHz (scaled from 0.0 MHz),
44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "960x720" 55.86 960 1008 1104 1248 720 721
724 746
(**) fglrx(0): Default mode "864x648": 45.1 MHz (scaled from 0.0 MHz),
40.2 kHz, 60.0 Hz
(II) fglrx(0): Modeline "864x648" 45.08 864 904 992 1120 648 649 652
671 +hsync +vsync
(**) fglrx(0): Default mode "800x600": 56.2 MHz (scaled from 0.0 MHz),
53.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "800x600" 56.25 800 832 896 1048 600 601 604 631
(**) fglrx(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz),
46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz),
48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz),
43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604
625 +hsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz),
37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz),
35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) fglrx(0): Default mode "800x600": 68.2 MHz (scaled from 0.0 MHz),
63.6 kHz, 100.0 Hz
(II) fglrx(0): Modeline "800x600" 68.18 800 848 936 1072 600 601 604
636 +hsync
(**) fglrx(0): Default mode "800x600": 60.1 MHz (scaled from 0.0 MHz),
56.9 kHz, 90.0 Hz
(II) fglrx(0): Modeline "800x600" 60.06 800 840 928 1056 600 601 604
632 +hsync
(**) fglrx(0): Default mode "640x480": 36.0 MHz (scaled from 0.0 MHz),
43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484
509 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz),
37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484
500 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz),
37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492
520 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz),
31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492
525 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 43.2 MHz (scaled from 0.0 MHz),
50.9 kHz, 100.0 Hz
(II) fglrx(0): Modeline "640x480" 43.16 640 680 744 848 480 481 484
509 +hsync
(**) fglrx(0): Default mode "640x480": 37.9 MHz (scaled from 0.0 MHz),
45.5 kHz, 90.0 Hz
(II) fglrx(0): Modeline "640x480" 37.89 640 672 736 832 480 481 484
506 +hsync
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz),
33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz),
31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
(**) fglrx(0): Default mode "512x384": 19.7 MHz (scaled from 0.0 MHz),
31.1 kHz, 75.0 Hz
(II) fglrx(0): Modeline "512x384" 19.68 512 528 576 632 384 384 385 416
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz),
46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 601 602
625 doublescan
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz),
45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605
742 doublescan
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz),
37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 240 481 482
501 doublescan
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz),
31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493
525 doublescan
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz),
31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 200 406 407
417 doublescan
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz),
31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459
524 doublescan
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6
kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024" 128.94 1280 1368 1504 1728 1024
1025 1028 1066 +hsync
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0
MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024
1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0
MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 85.51 1280 1344 1480 1680 1024
1025 1028 1083 interlace +hsync
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0
MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 77.80 1280 1344 1480 1680 1024
1025 1028 1077 interlace +hsync
(**) fglrx(0): Default mode "1280x720": 74.5 MHz (scaled from 0.0 MHz),
44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720" 74.48 1280 1336 1472 1664 720 721
724 746 +hsync +vsync
(**) fglrx(0): Default mode "1152x864": 119.7 MHz (scaled from 0.0
MHz), 77.1 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1152x864" 119.65 1152 1224 1352 1552 864 865
868 907 +hsync
(**) fglrx(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0
MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865
868 900
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz),
63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864" 96.77 1152 1224 1344 1536 864 865
868 900 +hsync
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz),
53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865
868 895 +hsync
(**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz),
43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 64.68 1152 1208 1328 1504 864 865
868 915 interlace +hsync
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz),
39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 58.29 1152 1200 1320 1488 864 865
868 911 interlace +hsync
(**) fglrx(0): Default mode "1024x768": 94.5 MHz (scaled from 0.0 MHz),
68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769
772 808
(**) fglrx(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz),
60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769
772 800
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz),
57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769
772 801 +hsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz),
56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771
777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz),
48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771
777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 44.9 MHz (scaled from 0.0 MHz),
35.5 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768
772 817 interlace
(**) fglrx(0): Default mode "1024x768": 100.2 MHz (scaled from 0.0
MHz), 72.8 kHz, 90.0 Hz
(II) fglrx(0): Modeline "1024x768" 100.19 1024 1088 1200 1376 768 769
772 809 +hsync
(**) fglrx(0): Default mode "960x720": 55.9 MHz (scaled from 0.0 MHz),
44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "960x720" 55.86 960 1008 1104 1248 720 721
724 746
(**) fglrx(0): Default mode "864x648": 45.1 MHz (scaled from 0.0 MHz),
40.2 kHz, 60.0 Hz
(II) fglrx(0): Modeline "864x648" 45.08 864 904 992 1120 648 649 652
671 +hsync +vsync
(**) fglrx(0): Default mode "800x600": 56.2 MHz (scaled from 0.0 MHz),
53.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "800x600" 56.25 800 832 896 1048 600 601 604 631
(**) fglrx(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz),
46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz),
48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz),
43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604
625 +hsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz),
37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz),
35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) fglrx(0): Default mode "800x600": 68.2 MHz (scaled from 0.0 MHz),
63.6 kHz, 100.0 Hz
(II) fglrx(0): Modeline "800x600" 68.18 800 848 936 1072 600 601 604
636 +hsync
(**) fglrx(0): Default mode "800x600": 60.1 MHz (scaled from 0.0 MHz),
56.9 kHz, 90.0 Hz
(II) fglrx(0): Modeline "800x600" 60.06 800 840 928 1056 600 601 604
632 +hsync
(**) fglrx(0): Default mode "640x480": 36.0 MHz (scaled from 0.0 MHz),
43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484
509 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz),
37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484
500 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz),
37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492
520 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz),
31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492
525 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 43.2 MHz (scaled from 0.0 MHz),
50.9 kHz, 100.0 Hz
(II) fglrx(0): Modeline "640x480" 43.16 640 680 744 848 480 481 484
509 +hsync
(**) fglrx(0): Default mode "640x480": 37.9 MHz (scaled from 0.0 MHz),
45.5 kHz, 90.0 Hz
(II) fglrx(0): Modeline "640x480" 37.89 640 672 736 832 480 481 484
506 +hsync
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz),
33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz),
31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
(**) fglrx(0): Default mode "512x384": 19.7 MHz (scaled from 0.0 MHz),
31.1 kHz, 75.0 Hz
(II) fglrx(0): Modeline "512x384" 19.68 512 528 576 632 384 384 385 416
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz),
46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 601 602
625 doublescan
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz),
45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605
742 doublescan
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz),
37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 240 481 482
501 doublescan
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz),
31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493
525 doublescan
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz),
31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 200 406 407
417 doublescan
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz),
31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459
524 doublescan
(--) fglrx(0): Display dimensions: (380, 300) mm
(--) fglrx(0): DPI set to (85, 86)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib64/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(**) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib64/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.0
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(**) fglrx(0): FSAA Gamma enabled
(**) fglrx(0): FSAA Multisample Position is fix
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.27.10
ABI class: X.Org Server Extension, version 0.3
(II) fglrx(0): Depth moves disabled by default
(**) fglrx(0): Capabilities: 0x00000000
(**) fglrx(0): CapabilitiesEx: 0x00000000
(**) fglrx(0): cpuFlags: 0x4000001f
(**) fglrx(0): cpuSpeedMHz: 0x000008a3
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): ATI GART size: 128 MB
(**) fglrx(0): UseFastTLS=0
(**) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfd7f0000 - 0xfd7fffff (0x10000) MX[B]
[1] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0xfdeff000 - 0xfdeff7ff (0x800) MX[B]
[7] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[B]
[8] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[B]
[9] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[B]
[10] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[B]
[11] -1 0 0xfd7e0000 - 0xfd7effff (0x10000) MX[B](B)
[12] -1 0 0xfd7f0000 - 0xfd7fffff (0x10000) MX[B](B)
[13] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[17] 0 0 0x00008c00 - 0x00008cff (0x100) IX[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x0000cc00 - 0x0000cc7f (0x80) IX[B]
[21] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B]
[22] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
[23] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[24] -1 0 0x0000f000 - 0x0000f0ff (0x100) IX[B]
[25] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[B]
[26] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[B]
[27] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[B]
[28] -1 0 0x00008c00 - 0x00008cff (0x100) IX[B](B)
[29] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[30] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) fglrx(0): UMM Bus area: 0xd0701000 (size=0x078df000)
(II) fglrx(0): UMM area: 0xd0701000 (size=0x078df000)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 7.1.1.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
[drm] failed to load kernel module "fglrx"
(II) fglrx(0): [drm] drmOpen failed
(EE) fglrx(0): DRIScreenInit failed!
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xd0000000 FBMappedSize: 0x07fe0000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color
buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(WW) fglrx(0): Option "NoDDC" is not used
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): Direct rendering disabled
(==) fglrx(0): Using hardware cursor
(II) fglrx(0): Largest offscreen area available: 1280 x 7163
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(EE) AIGLX: Screen 0 is not DRI capable
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib64/xorg/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse1: Buttons: 11
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "pl"
(**) Keyboard1: XkbLayout: "pl"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
xkb_keycodes { include "xfree86+aliases(qwerty)" };
xkb_types { include "complete" };
xkb_compatibility { include "complete" };
xkb_symbols { include "pc(pc105)+pl" };
xkb_geometry { include "pc(pc105)" };
(II) Mouse1: ps2EnableDataReporting: succeeded
(II) 3rd Button detected: disabling emulate3Button
Thanks in advance,
Radek.
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-user] ATI X800 - no opengl + logout problem
2006-11-20 19:51 [gentoo-user] ATI X800 - no opengl + logout problem Radoslaw Grzanka
@ 2006-11-20 20:20 ` Richard Fish
2006-11-20 20:40 ` Radoslaw Grzanka
2006-11-21 12:29 ` [gentoo-user] " James
2 siblings, 0 replies; 10+ messages in thread
From: Richard Fish @ 2006-11-20 20:20 UTC (permalink / raw
To: gentoo-user
On 11/20/06, Radoslaw Grzanka <radekg@tygrysek.hopto.org> wrote:
> The problem I'm having is no opengl - fglrxinfo output:
[reordered for flow]
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is -1, (No such device or address)
> drmOpenDevice: open result is -1, (No such device or address)
> drmOpenDevice: Open failed
> [drm] failed to load kernel module "fglrx"
> (WW) fglrx(0): Failed to open DRM connection
> (EE) fglrx(0): DRIScreenInit failed!
> (WW) fglrx(0): ***********************************************
> (WW) fglrx(0): * DRI initialization failed! *
> (WW) fglrx(0): * (maybe driver kernel module missing or bad) *
> (WW) fglrx(0): * 2D acceleraton available (MMIO) *
> (WW) fglrx(0): * no 3D acceleration available *
> (WW) fglrx(0): ********************************************* *
Is the fglrx kernel module loaded? If so, does /dev/dri/card0 exist?
Remember that you must remerge ati-drivers each time you build a
kernel...and that /usr/src/linux needs to be a symlink to the
configured sources of your _currently_ running kernel if want to build
a module for that.
> and problem with switching (or in fact logging out from X) to text
> console..
Are you using the radeon framebuffer driver (CONFIG_FB_RADEON) in the
kernel? If so, that is probably the issue. Try removing that, and
using just the standard vga/vesa framebuffer driver or even just a
text-mode console.
-Richard
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-user] ATI X800 - no opengl + logout problem
2006-11-20 19:51 [gentoo-user] ATI X800 - no opengl + logout problem Radoslaw Grzanka
2006-11-20 20:20 ` Richard Fish
@ 2006-11-20 20:40 ` Radoslaw Grzanka
2006-11-20 20:51 ` Richard Fish
2006-11-21 12:29 ` [gentoo-user] " James
2 siblings, 1 reply; 10+ messages in thread
From: Radoslaw Grzanka @ 2006-11-20 20:40 UTC (permalink / raw
To: gentoo-user
Radoslaw Grzanka napisał(a):
>
> The problem I'm having is no opengl - fglrxinfo output:
Ok. I am complete moron. OpenGL works now. I have still problem with
switching to text console or logging out from Xs
If anybody can help...
Thanks,
Radek.
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-user] ATI X800 - no opengl + logout problem
2006-11-20 20:40 ` Radoslaw Grzanka
@ 2006-11-20 20:51 ` Richard Fish
2006-11-20 21:22 ` Radoslaw Grzanka
0 siblings, 1 reply; 10+ messages in thread
From: Richard Fish @ 2006-11-20 20:51 UTC (permalink / raw
To: gentoo-user
On 11/20/06, Radoslaw Grzanka <radekg@tygrysek.hopto.org> wrote:
> Ok. I am complete moron. OpenGL works now. I have still problem with
> switching to text console or logging out from Xs
On 11/20/06, Richard Fish <bigfish@asmallpond.org> wrote:
> Are you using the radeon framebuffer driver (CONFIG_FB_RADEON) in the
> kernel? If so, that is probably the issue. Try removing that, and
> using just the standard vga/vesa framebuffer driver or even just a
> text-mode console.
-Richard
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-user] ATI X800 - no opengl + logout problem
2006-11-20 20:51 ` Richard Fish
@ 2006-11-20 21:22 ` Radoslaw Grzanka
2006-11-20 22:12 ` Richard Fish
0 siblings, 1 reply; 10+ messages in thread
From: Radoslaw Grzanka @ 2006-11-20 21:22 UTC (permalink / raw
To: gentoo-user
Richard Fish napisał(a):
> On 11/20/06, Radoslaw Grzanka <radekg@tygrysek.hopto.org> wrote:
>> Ok. I am complete moron. OpenGL works now. I have still problem with
>> switching to text console or logging out from Xs
>
>
> On 11/20/06, Richard Fish <bigfish@asmallpond.org> wrote:
>> Are you using the radeon framebuffer driver (CONFIG_FB_RADEON) in the
>> kernel? If so, that is probably the issue. Try removing that, and
>> using just the standard vga/vesa framebuffer driver or even just a
>> text-mode console.
Thanks for reply. If I use any FB then I cannot start X - same issue it
hangs and turns off my monitor. If I turn off FB (and I was using vesa
btw) and use text console then I can start x but cannot logout.
Thanks again,
Radek.
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-user] ATI X800 - no opengl + logout problem
2006-11-20 21:22 ` Radoslaw Grzanka
@ 2006-11-20 22:12 ` Richard Fish
2006-11-21 17:47 ` Radoslaw Grzanka
0 siblings, 1 reply; 10+ messages in thread
From: Richard Fish @ 2006-11-20 22:12 UTC (permalink / raw
To: gentoo-user
On 11/20/06, Radoslaw Grzanka <radekg@tygrysek.hopto.org> wrote:
> Thanks for reply. If I use any FB then I cannot start X - same issue it
> hangs and turns off my monitor. If I turn off FB (and I was using vesa
> btw) and use text console then I can start x but cannot logout.
Ok, the other thing you might try is a more recent version of the
drivers. You can get the ~arch version with "echo
x11-drivers/ati-drivers >>/etc/portage/package.keywords". Updating
ati-drivers then should give you version 8.30.3 (and in a few days,
8.31.5).
But other than that, I don't really know.
-Richard
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 10+ messages in thread
* [gentoo-user] Re: ATI X800 - no opengl + logout problem
2006-11-20 19:51 [gentoo-user] ATI X800 - no opengl + logout problem Radoslaw Grzanka
2006-11-20 20:20 ` Richard Fish
2006-11-20 20:40 ` Radoslaw Grzanka
@ 2006-11-21 12:29 ` James
2006-11-21 13:10 ` Radosław Grzanka
2 siblings, 1 reply; 10+ messages in thread
From: James @ 2006-11-21 12:29 UTC (permalink / raw
To: gentoo-user
Radoslaw Grzanka <radekg <at> tygrysek.hopto.org> writes:
> I am struggling with ati-drivers for ATI X800 card. I have followed
> every HOWTO I could find through google but still no luck. The video
> card I have is ATI X800 GTO. Here goes relevant lspci output:
> 05:00.0 VGA compatible controller: ATI Technologies Inc R480 [Radeon
> X800 GTO (PCIE)]
> 05:00.1 Display controller: ATI Technologies Inc R480 [Radeon X800 GTO
Hello Radoslaw,
Your card is listed here as working very well:
http://gentoo-wiki.com/HARDWARE_Video_Card_Support_Under_XGL#ATI_Cards
hth,
James
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-user] Re: ATI X800 - no opengl + logout problem
2006-11-21 12:29 ` [gentoo-user] " James
@ 2006-11-21 13:10 ` Radosław Grzanka
2006-11-21 21:18 ` James
0 siblings, 1 reply; 10+ messages in thread
From: Radosław Grzanka @ 2006-11-21 13:10 UTC (permalink / raw
To: gentoo-user
James napisał(a):
> Radoslaw Grzanka <radekg <at> tygrysek.hopto.org> writes:
>
>
>
>> I am struggling with ati-drivers for ATI X800 card. I have followed
>> every HOWTO I could find through google but still no luck. The video
>> card I have is ATI X800 GTO. Here goes relevant lspci output:
>>
>
>
>> 05:00.0 VGA compatible controller: ATI Technologies Inc R480 [Radeon
>> X800 GTO (PCIE)]
>> 05:00.1 Display controller: ATI Technologies Inc R480 [Radeon X800 GTO
>>
>
>
> Hello Radoslaw,
>
> Your card is listed here as working very well:
>
> http://gentoo-wiki.com/HARDWARE_Video_Card_Support_Under_XGL#ATI_Cards
>
>
>
Hi,
Actually I cannot find R480 chipset there, nor X800 GTO, so either I'm
missing something or nobody added this card to the list.
Anyway as for XGL - now, when I have OpenGL I am trying to run XGL and
Beryl. However this is mundane work as I have to reset my box after each
configuration change because my box hangs upon exiting to text console. :(
Thanks,
Radek.
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-user] ATI X800 - no opengl + logout problem
2006-11-20 22:12 ` Richard Fish
@ 2006-11-21 17:47 ` Radoslaw Grzanka
0 siblings, 0 replies; 10+ messages in thread
From: Radoslaw Grzanka @ 2006-11-21 17:47 UTC (permalink / raw
To: gentoo-user
Richard Fish napisał(a):
> On 11/20/06, Radoslaw Grzanka <radekg@tygrysek.hopto.org> wrote:
>> Thanks for reply. If I use any FB then I cannot start X - same issue it
>> hangs and turns off my monitor. If I turn off FB (and I was using vesa
>> btw) and use text console then I can start x but cannot logout.
>
> Ok, the other thing you might try is a more recent version of the
> drivers. You can get the ~arch version with "echo
> x11-drivers/ati-drivers >>/etc/portage/package.keywords". Updating
> ati-drivers then should give you version 8.30.3 (and in a few days,
> 8.31.5).
>
> But other than that, I don't really know.
That didn't do a trick. During logout I still have system hang. There
are however side effects. Now I see in XOrg logs:
(EE) AIGLX error: dlopen of /usr/lib64/dri/fglrx_dri.so failed (/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file or directory)
(EE) AIGLX: reverting to software rendering
the library is not there but it is under: /usr/lib64/xorg/modules/dri . When I do the symlink where xorg searches for it then I got "unresolved symbol" errors:
(EE) AIGLX error: dlopen of /usr/lib64/dri/fglrx_dri.so failed (/usr/lib64/dri/fglrx_dri.so: undefined symbol: _glapi_add_entrypoint)
(EE) AIGLX: reverting to software rendering
Anyway, I believe this is not related to my problem.
Thanks for your input. If you've got any other ideas (even random) than
please share.
Cheers,
Radek.
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 10+ messages in thread
* [gentoo-user] Re: ATI X800 - no opengl + logout problem
2006-11-21 13:10 ` Radosław Grzanka
@ 2006-11-21 21:18 ` James
0 siblings, 0 replies; 10+ messages in thread
From: James @ 2006-11-21 21:18 UTC (permalink / raw
To: gentoo-user
Radosław Grzanka <radekg <at> tygrysek.hopto.org> writes:
> >> I am struggling with ati-drivers for ATI X800 card. I have followed
> >> every HOWTO I could find through google but still no luck. The video
> >> card I have is ATI X800 GTO. Here goes relevant lspci output:
> Actually I cannot find R480 chipset there, nor X800 GTO, so either I'm
> missing something or nobody added this card to the list.
Hello Radosław,
From: http://gentoo-wiki.com/HARDWARE_Video_Card_Support_Under_XGL#ATI_Cards
<snip>
* Radeon X800
o Chipset: R420 JK
o Driver: ati-drivers-8.22.5
o Notes: OpenGL windows render black, mplayer and xscreensaver crash X
* Radeon x800 Pro
o Chipset: R420 JI
o Driver: ati-drivers-8.26.18
o Notes: Works perfectly, no problems found at all.
* Radeon X800 XT
o Chipset: R420 JK
o Driver: 8.27.10-r1
o Notes: Works perfectly on x86_64 AMD64
* Radeon X800 XL
o Chipset: R430 554D
o Driver: ati-drivers-8.25.18
o Notes: Works perfectly on x86_64 AMD64
* Radeon X850 Pro
Looks like the same card to me..... Chips numbers may be different,
so it's hard to tell if there is/isnot an exact match. Often chips
numers just indicate trivial differences like the amount of
internal cache, MHz speeds of busses/processes etc etc.
I did not see it in the section where video cards that are know to
not work.....
hth,
James
James
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2006-11-21 21:26 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-11-20 19:51 [gentoo-user] ATI X800 - no opengl + logout problem Radoslaw Grzanka
2006-11-20 20:20 ` Richard Fish
2006-11-20 20:40 ` Radoslaw Grzanka
2006-11-20 20:51 ` Richard Fish
2006-11-20 21:22 ` Radoslaw Grzanka
2006-11-20 22:12 ` Richard Fish
2006-11-21 17:47 ` Radoslaw Grzanka
2006-11-21 12:29 ` [gentoo-user] " James
2006-11-21 13:10 ` Radosław Grzanka
2006-11-21 21:18 ` James
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox